www.bidschmid.com to bid or click on green box view online auction catalog!

1       Caterpillar 80 Industrial Forklift, 5,958 hours, hydraulic fork slide, all terrain tires, side shift, Model GP 40, 8,000lb, 60'' forks wide by 5ft long, machine weights 12,440 lbs, s/n- 1CM02991 ( We reserve the right to use the forklift to help load out until 3:00pm on May 8th)

2       Large Outdoor Steel Racking, steel I Beams, and metal not included, just the frame.

3       Clark ECS Forklift, 4500lb machine, no side shift, 5,239 hours, Electric Forklift with charger, 6ft forks, has extensions, no flat tires, s/n- E35706156850. ( We reserve the right to use the forklift to help load out until 3:00pm on May 8th)

4       1998 Large Accurshear 625010, 1/4' 'steel plate x 10ft Power Shear, 20hp, 16,500 lbs, 3 phase, table height 32'', table depth 22'', with Auto Set Cut

5       1986 HTC Hydraulic/Mechanical Press Brake Model 300-12R, 20hp, 8'' Bed width, 6'' Throat Depth, weighs 36,000lbs, s/n- 387270. (buyer must load themselves after the auction is over, we do not have the equipment to load)

6       Anvil on stand, 25'' Long, 11'' Tall, by 4'' wide, table measures 18'' x 12'' by 27'' T

7       Dake Arbor Press Model 3A, 16'' Jaw, and Heavy Duty Vise with 6'' jaw, on heavy duty table, press has extra pieces and parts that go with, table is 48'' long by 42'' tall.

8       Ball Hitch Flatbed Trailer, tandem axle, no ramps,20ft long, 100'' wide, steel floor

9       Miller Dynasty 200 Tig and Arc Welder on rolling cart, has frame built to set tank in, 36'' x24'' cart, 38'' tall.

10     Miller Dynasty 350 Tig and Arc Welder Water Cooled, purchased in 2018, on cart, tank does not go with, with leads, remote foot pedal.

11     Miller SRH-333 Portable Arc Welder with leads, 230 3 phase

12     Miller Maxstar 200 Tig and Arc Welder on rolling cart, with foot pedal, has frame built to set tank in,

13     Lincoln 250 GXT Ranger portable welder, stick and tig weld, Kohler 23hp gasoline engine, set up to hold tank, 416 hours, electric start, with leads and tank gauges.

14     Lincoln Aspect 375 Tig and Arc Welder, water cooled, with leads, remote foot pedal, purchased in 2020, with tank gauges, s/n- U0200100009.

15     Miller Millermatic 251 Mig Welder, M-25 Gun, with tank gauges, tank not included.

16     Miller Matic 252 Mig Welder, M-25 Gun, with torch gauges with 25ft python lead.

17     Large Industrial Hydraulic Press, 4ft wide, 7ft tall, with benders and extra hardware

18     2005 Comeq Power Bending Roll Model LH 180/6, 7ft x 1850mm, 230 3 Phase, weighs approx 6,000lbs.

19     Miller Arc Weder, 230 3 phase, with leads, on rollers

20     Miller CP-302 Mig Welder, with S-21E 24 Volt Wire Feeder, 230 3 Phase

21     Miller Shopmaster 300 AC/DC Welder, on rolling cart,

22     Hammond Machinery Builders INC Industrial Bench Grinder, 46'' tall, 230 3 phase

23     Large Industrial Drill Press, High, Low, Medium Geared, and different kind of speed, Oiled Up, very reliable machine, 230 Volt, 3phase.

24     Large Shelf with large assortment of Morse Drill Press bits and sleeves

25     Geka Hydra crop 50/A Ironworker, with foot pedal, can punch, shear up to 4'' channel, angle up to 5x5x1/2'', and notch, shear 3/4'' by 8'' flat bar, 230 3 Phase.

26     2015 Jet Drill Press, Gear driven, 230 Volt, Motor 80/2-4-70.

27     Hilman Bull Dolly and Hilman Rolling System, Capacity up to 24 tons, like new, used twice.

28     KBC Machinery 16 speed Heavy Duty Drill Press

29     Burr-King Leeson Speed Master 1.5hp belt sander, with extra belts

30     2009 Ingersoll 80 Gallon Air Compressor, 230 Volt, 7.5hp

31     Hyd-Mech Horizontal Band Saw, water coolant, all hyd. Ran, 230 Volt S-20A Series II,

32     Wellsaw Miter Head Horizontal Saw, Model 1316 Swivel, Serial Number 6141, 230 Volt

33     Ridgid Pipe and Bolt Threading Machine 1822-I, 110 Volt, with foot control

34     Heavy Duty Rolling Cart Table, HD Casters, 4ft L X 2ft W X 40'' Tall

35     Heavy Duty Rolling Cart, with casters, 48'' long, 39'' Tall x 20'' Wide, was used for a roll around toolbox and organizer.

36     2014 Victor Thermal Dynamics Plasma Cutter (need tuned up)

37     2014 Victor Thermal Dynamics Plasma Cutter (need tuned up)

38     Banding/Strapping Machine on cart

39     Metal Roller, hand crank, 40'' wide with equipment roller

40     4 Cans of Fleet weld 6010 5/32'' 4.0mm welding rods, 50lbs a piece

41     6 Cans of 7018 ESAB Atomarc Welding Rods, 50lb a piece

42     Large Heavy-Duty Welding Table, with Vice, 5ft x 5ft x 32'' tall

43     HD Extension Cords

44     Large Fire Extinguisher 2024 with bracket

45     Office chair, tape, misc metal parts, gauge, and craftsman seat

46     Pipe Cutter, 3'' x 6''

47     Pipe Cutter, 3'' x 6''

48     Small V Vice

49     Rail Trolleys

50     Rail Trolleys

51     Homemade Pipe Stand, 42'' tall.

52     Homemade Pipe Stand, 32'' Tall

53     Homemade Pipe Stand 38'' tall.

54     Homemade Pipe Stand, 42'' tall.

55     Werner 5ft Step Ladder

56     Garden Hose

57     Torch Hoses

58     7 1/2'' pipe by 36'' and misc metal

59     Homemade Pipe Stand, 36''

60     12 Heavy Duty Steel Rollers, 54'' Long, 3'' diameter

61     Homemade Pipe Stand 40'' tall.

62     3 Ton Floor Jack

63     4000lb Floor jack

64     Dolly Cart

65     Welding Lead

66     Welding Lead

67     Welding Lead

68     Welding Lead

69     Hubbell 1 1/2

70     No Entry Metal Put up Gates.

71     Homemade Metal Stand with radio

72     Metal Roll Around Cart on Casters, 32'' x 48''

73     Ground Lead

74     Welding Lead

75     Fire Extinguisher 2023

76     48'' Metal Bench and chair

77     2024 Fire Extinguisher

78     Cutting Torch Cart, with gauges, tank not included.

79     Mechanic Roll Around Stool

80     Assortment of Stainless tubing and Ts, and elbows

81     Air Hose

82     Metal rolls around rack

83     Acorn Iron and Supply Welding Table, Very Heavy Duty with vice, 5ft x 6ft, 37'' tall

84     Squares, grinding wheels, wire brush, puddy knives, and misc.

85     Bucket of Power Tools do not work.

86     Assortment of Lubricants and Glass Cleaner, Adhesive, and Starting Fluid

87     Shelf full of welding rods, 6011, 7018, 6013,

88     Shelf of Welding Rods 7018

89     Shelf of 6011 Welding rods

90     Shelf with 6010 welding rods

91     Shelf with welding rods 7018 and 5010 rods

92     Ground Cables and welding leads.

93     1 Full can of 6010 welding rods

94     Weedeater string, rachet boomer no hooks, and plug ins.

95     Air hose, Protractor, square, misc

96     Storage Cabinet (old freezer has light to keep temp warm for welding rods), items not included in the shelf.

97     2 Large Rachet Straps

98     2 Large Rachet Straps

99     2 Rachet Straps

100   2 Rachet Straps

101   Extension Cords

102   Rolling Stand

103   Rolling Stand

104   Homelite Concrete saw, needs tune up, freed up.

105   Small Diamond Plate Toolbox, 21'' x 12'' T

106   Stainless sink, no faucet, 28'' x 27'' x 37 T

107   Large Railroad Jack

108   Rolling Stand

109   Extension Cords

110   Dolly Cart

111    Extension Cords

112   1999 Centaur TM III 150 PTW Portable Computer Controlled Orbital Welding System with 5004 Welding Head

113   Wachs Tube and Pipe Squaring Machine, with case, and extra bits for sizes up 1/2'' tubing to 4 1/2.''

114   Metal Drill Bits

115   Wire Brushes and Tin Snips

116   Stanley 3/8'' Standard and Metric Socket Set with standard wrenches.

117   Channel Locks, Snips, Vise Grip, and Pliers

118   Milwaukee Electric sawzall

119   Milwaukee Brushless impact with charger, no battery

120   Milwaukee Fuel impact with charger and 4.0 battery

121   Gear Wrench 20pc combination wrench set, missing 1.

122   Hilti TE 4-A22 Concrete Hammer Drill

123   Large Standard wrenches

124   Prograde Standard wrenches

125   Standard wrenches, Dewalt, and others

126   20pc 1/2'' Drive Socket Set

127   Chrome Vanadium Master Tradesman Metric Wrenches

128   Standard Wrenches, small size

129   Gear Wrench Standard Ratcheting wrenches.

130   Allied Metric Wrenches

131   Allied Standard Wrenches

132   Metric Wrenches, 9mm-18mm

133   Craftsman Standard Ratcheting Wrenches

134   Prograde Standard Wrenches

135   Chrome Vanadium Master Tradesman Standard Wrenches

136   Stanley Wrenches, standard and metric

137   Chrome Vanadium Master Tradesman Metric Wrenches

138   Assortment of Double ended and Bent Wrenches

139   Small Metric Wrenches

140   New TCT 2-1/2'' Saw Bit

141   2 New Strikers

142   Standard Punch Set

143   New Wire Grinding Wheels

144   New Polycarbonate Lenses

145   Speed glass Auto Darkening Helmet

146   3 30'' Flame retardant cotton jacket, Size Large

147   2 High Visibility Jackets

148   New and Used Torch Tips

149   Punch Set

150   New and Used Torch Tips

151   25 New 3M 125mm Grinding Wheels

152   25 New 3M 150 MM Grinding Wheels

153   25 New 3M 125mm Grinding wheels.

154   Number 11 Shades

155   Arcar Copper Clad Pointed Electrodes

156   Euroboor Holland Cutter Shank Bits 16x30mm-16x55m, new

157   Scotch-Brite Grinding Wheels, 4 inch.

158   Hand-held Refractometer Like New, MT-010ATC

159   Euroboor Shank Bits, 9/16, 1 5/8, 1 1/8, 7/16, 1/2, most are new.

160   7 New Eagle Wire Brushes BW112 Carbon Wire

161   New Tweco 200amp Electrode Holder

162   New Tweco 200amp Electrode Holder

163   New Tweco MPC Connectors

164   New Tweco 300amp Copper Ground Clamp

165   New Tweco 200amp Electrode Holder

166   Milwaukee Band Saw, electric, with extra blade

167   Bucket Full of Large Files

168   Metabo Electric Hammer Drill with Case

169   Assortment of Extensions, 1/2'' and 3/8'' 3''-12''

170   New Hand Taps and one large used tap, 5/8, 3/4,

171   3 Rivet Guns

172   Large Assortment of Like New Thread Taps

173   Large Assortment of Allan Wrenches, standard and metric

174   T Square and Large Aluminum Rulers

175   Ridgid Rapid grip HD 12'' Pipe Wrench

176   1/2'' T 40-T70 Hex Bits

177   5 Levels, 12''- 24''

178   3 Levels, 12''-48''

179   Irwin Vise-Grip Pipe Wrench and Mini Sledgehammer

180   Dewalt Angle Grinder in Homak Tool Case

181   Milwaukee Fuel Drill, with charger and case, no battery

182   Standard Wrenches, Oallen Brand

183   Large Metric Wrenches

184   2 Monkey Wrenches

185   New Tweco 300amp Flat Jaw Ground Clamp

186   Dead Blows and Ball Peen Hammers

187   New Replacement Pressure Gauge

188   Crescent Wrenches

189   New Tweco 300amp Flat Jaw Ground Clamp

190   440 3 Phase to 230 3 Phase Adapter

191   440 3 Phase to 230 3 Phase Adapter

192   Crescent Wrenches

193   New Jugs of Tap Magic Protap Cutting Fluid

194   5 Prybars

195   Tweco 300-amp Flat Jaw Ground Clamp

196   Mini Sledge and Ball Peen Hammer

197   Sledgehammer, ball peen and pic hammer.

198   Assortment of Screw Drivers

199   3 Mini Sledgehammers

200   3 Squares

201   2 Mini Sledgehammers and 1 ball peen hammer

202   3 Small levels, 18'' - 24''

203   2 Large Clamps,

204   Assortment of Screw Drivers

205   Channel Lock, needle nose, snips, and wire cutter.

206   3 C Clamps

207   2 HD Large Adjustable Clamps

208   Large C Clamp and Small C Clamp

209   3 Large HD. Adjustable Clamps

210   Commercial Ridgid HD 36'' Aluminum Pipe Wrench

211   3 C Clamps

212   2 C Clamps

213   2 HD Adjustable Clamps

214   2 HD Adjustable Clamps

215   2 HD Adjustable Clamps

216   2 Large C Clamps

217   2 HD Adjustable Clamps

218   3 HD Adjustable clamps

219   Commercial Ridgid HD 36'' Aluminum Pipe Wrench

220   2 HD Long Adjustable Clamps

221   5 Clamp Vise Grips

222   Truecraft 36'' Pipe Wrench, Heavy Duty

223   5 Clamp Vise Grips

224   4 Crescent Wrenches

225   4 Crescent Wrenches

226   2 10'' Pipe Wrenches

227   Clamp Vise Grips

228   Eliminator Rachet System,

229   Craftsman 1/2'' Metric and Standard Socket Set

230   20pcs Gear Wrench 1/2' 'Standard Deep Well Socket Set

231   3 Large Vice Grip Clamps

232   2 3 Way 110 Volt Plugs

233   2 Wilton C Clamps

234   Ridgid 14'' pipe wrench

235   5 Vise Grip Clamps

236   Ridgid 24'' Pipe Wrench

237   Ridgid 24'' Pipe Wrench

238   3 Welding pix

239   2 48'' levels

240   Jackson WH10 New Welding Helmet

241   Jackson WH10 New Welding Helmet

242   33 pc. Large Punch Set

243   Small 24pc Punch Set

244   Assortment of Brazing Heads

245   Assortment of welding hammers

246   4 Large Clamps, 24''- 96''

247   Sledge, hammer, and ball peen heads

248   Vise Grip, Flare-nut wrench set, chalk lines and misc

249   Wire Nuts and Connectors

250   Imperial Swivel Lever Type Tube Bander

251   2 Strikers

252   T Squares, Bits, Hinges, and misc

253   Small Fan

254   Air Sander and Air Wire Brush, and misc

255   Milwaukee Magnum Hammer Drill

256   Grinding Wheels and Wrenches, 4''

257   Brass Hammer and Vintage Grinding Wheel Dresser

258   Dewalt Angle Grinder and Metabo Grinder, all electric

259   Squares, Files, and lifting rope.

260   Dewalt Bits, Punch, Level, Hex Swivel Bits, Scissors, and misc

261   Klean Strip Acetone 3/4 full

262   17pc Craftsman Rachet 1/2'' Drive

263   Large Socket and Wrench Set, 1/4'' and 1/2''

264   Rachets and assortment of sockets

265   Caulking Guns

266   Channel Lock, Hex Bits, Socket Set, Punches, and misc tools.

267   Gauges, Air Items, Stainless Circular Clamps

268   Dewalt Sawzall with extra blades

269   Crescent Sockets and Wrenches, and Rachet Set

270   Milwaukee Electric Hammer Drill

271   Euroboor Magnetic Cordless Drilling Machine with 2 Batteries and Charger

272   Slugger Center free Cutters

273   Milwaukee Battery Operated Caulking Gun

274   Milwaukee Drill, Grinder, Battery, and Charger

275   Dewalt Electric Jig Saw with Extra blades.

276   Milwaukee Shop Vac, No Battery No Hose

277   Dewalt Magnetic Drill Press Variable Speed, 2'',

278   Dewalt Electric Router

279   Hilti AG 500-11S Angle Grinder with cover and vac hose

280   Milwaukee Electric Band Saw, No Blade

281   2 Electric Hammer Drills

282   Ridgid Heavy Duty Electric Pipe Threader with 6 bits

283   HD Vise

284   Toolbox with Brass Fittings, air fittings and other metal fittings

285   Assortment of Metal Drill Bits, Made in USA

286   Hole Saw Bits

287   Large Milwaukee Grinder/ Sander

288   Milwaukee Drill, bits, and 1/2'' electric impact

289   Toolbox with large hole saw bits.

290   23/64'', 11/32'' and 21/64'' metal drill bits

291   13/32'', 25/64'', and 3/8'' metal drill bits

292   13/32'' and 25/64'' metal drill bits

293   29/64'', 7/16'' and 27/64'' metal drill bits

294   1/2'', 31/64'' and 15/32'' drill bits

295   2 New 4'' Morse Carbide Tipped Hole saw bits and Arbo Hole saw,

296   Ridgid Pipe Threader and bits

297   Assortment of Metal Drill Bits

298   Dewalt 1/2'' Impact and Black and Decker Router

299   Carriage Bolts, 1/2'' x 3'' and other sizes

300   Baldor- Reliance 1hp motor Clamp

301   Milwaukee Large hammer drill with bits

302   Tote full of Roller Wheels and Casters

303   4'' Strap Trailer Lock Tie Down

304   Rigid oiler 418

305   Welding Leads

306   Box full of 1/2'' x 2'' Bolts.

307   1/4'' x 2 1/4'' bolts

308   Self-tapping screws

309   1/2'' and 5/8'' Bolts and nuts

310   3/8'' nuts

311   3/4'' All Threads

312   5/8'' Nuts

313   1/2'' Nuts

314   Lag Screws

315   Lag Screws

316   Tig/Torch 25'' Rubber Cable

317   TigTorch Rubber Hose

318   Dry seal Pipe Threaders

319   New Can of Welding Rods, 6010, 50 lbs

320   New Can of Welding Rods, 7018, 50lbs

321   New Can of Welding Rods, 7018, 50 lbs

322   New Can of Welding Rods, 6010, 50 lbs

323   New Can of Welding Rods, 6010, 50 lbs

324   New Can of Welding Rods, 7018, 50lbs

325   Ridgid Pipe Threader

326   Ridgid Pipe Threader

327   Armstong Toolbox with C Clamp, measuring meters, air gauges and misc.

328   3 Cans of E 316L-16 Stainless Electrodes

329   Roll of Alloy .045'' Aluminum Wire

330   Torch and Tank Gauges

331   50lb Can of Welding Rods, 1/16T 9R27

332   In weld Alloy ER 4032 .035'' Aluminum Wire

333   Brazing Heads

334   New Inweld HF-962 Welding Rods

335   New Inweld HF-962 Welding Rods

336   New Inweld 11018 M Welding rods

337   Miller W-375 Torch Package, 25ft and Braided 50mm Cable cover

338   Miller A-150 Series Tig Torch Package, 25ft Rubber Hose

339   Box of New Iron Craft Welding Gloves

340   Inweld Stainless Steel Welding Wire, 309 L 0.035

341   Box of Iron Craft and Welding Gloves

342   Lincoln Electric .045'' 25lb Steel Spool

343   Torch and Tank Gauges

344   Dewalt 1/2'' Hammer Drill New

345   Belt Sanding Belts

346   Hypertherm Genuine Consumables, Torch tips and welding tops, some are new.

347   Hypertherm Genuine Consumables, Torch tips and welding tops, some are new.

348   4 Cans of Best Welds Anit-Splatter Solvent Based

349   Roll of Metal Wire

350   8 Bottles of Simple Green Anit-Spatter

351   Assortment of Torch Tips, some new, all sizes

352   Alloy 0.035'' metal wire

353   Sure weld 50lb box of 6011 welding rods

354   Sait 4-1/2x1/4 new grinding wheels, 10 of them

355   Atom Arc Low Hyd. Welding Electrodes, 7018

356   New 0.045'' Inner shield wire, 25lb

357   Alloy 0.035'' metal wire, some used.

358   4 New Tweco Positive Cable Connector

359   Torch Heads and Gauges, and tips

360   New Tap and Die Set

361   New Euroboor Slug Bits and taper shank

362   Assortment of Brass Fittings

363   Ear Plugs, Shelf with O Rings, Tig accessories

364   Large Vise

365   3 Shur lite Industrial Strikers

366   Welding Tips, Shield Caps, Contact Tips, Nozzle Retainer

367   Drill Bit Wire Brushes

368   Jackson F30 Face Shields

369   Klean Strip Acetone, 3 jugs, 1/2 full

370   Vgard Accessory System for safety hats

371   New Pressure Gauges, Brass Socket

372   New Head Gear

373   Lincoln Inner shield 0.045mm 25lb Steel Spool

374   Lincore 55 Hard facing 22lb 1/16 diameter wire.

375   Grinding Wheel, 3 New Koflo Flowrate meters, Fitting Vise Grip, sanding pads, Brass Hose and misc.

376   New 25ft Gas Hose and 25ft Water Hose

377   Conspicuity marking Tape, and Oralite 2'' tape.

378   Paint Marker, large assortment of tip cleaners.

379   Connectors, Miller Plug ins, Stainless steel wire, and other welding items

380   Masks, Safety Glasses, Respirators, and misc

381   Welder Cover Lens, Brass adapter,

382   Lincore 55 Hard facing Wire, 1/16'', 22lb.

383   Lincore 55 Hard facing Wire, 1/16'', 22lb.

384   New Inweld Mild and Low Alloy Steel Welding Wire, 11lbs, .023

385   New Inweld Mild and Low Alloy Steel Welding Wire, 11lbs, .035

386   New Inweld Mild and Low Alloy Steel Welding Wire, 11lbs, .030

387   White Oakum with Bentonite 3/8''

388   2 Metabo Flap Wheels, 105 x 100mm

389   Mig Hose and Handles, Vise Clamps, Plastic Hose, and air chucks

390   Stainless Hose, 32'' long, 2''

391   Large Thread Bits, Punch Set and chuck key.

392   Safety Harnesses

393   Profax TCM-100 Portable Motorized Track Machine

394   Trailer Tongue Hitch, 2'' Ball,

395   Trailer Tongue Hitch, 2 5/16''

396   2'' Steel Flex Hose extension

397   Hand Crank Winch

398   Large Punch Set, 34pcs

399   Abrasive Tools

400   2 5/16'' Truck Gooseneck Ball

401   New 2'' x 12'' Hitch Insert

402   3 Ball Inserts, 2 5/16'' and 2''

403   New 2'' x 12'' Hitch Insert

404   New 2'' x 12'' Hitch Insert

405   New 2'' x 12'' Hitch Insert

406   New 2'' x 12'' Hitch Insert

407   New 2'' x 12'' Hitch Insert

408   2 New Welding Jackets, Size large

409   New Hilti Injectable Hybrid Mortar used for anchoring and rebar.

410   New Toolbox Door/ handle clamps, latches, and tightness

411   Hilti Hardware, Nuts, Bolts, and Washers

412   Hilti All Threads 5/8''

413   Stainless Dampers

414   Hinge, Bearing Holder, new bearings, and misc.

415   Bearing and Clamp Collar s

416   Sockets and Pass-thru wrench set

417   4 Ridgid Pipe Cutters

418   Pliers, T level, and Utility Knives

419   Brass Fittings

420   1/2'' Standard sockets

421   Bottle Jack

422   Stanley Sockets, 1/4'' and 3/8''

423   Stanley Rachet/ Socket, and Wrench Set

424   Assortment of Sockets, some deep well, standard, 1/2''

425   Stanley Sockets, missing quite a few.

426   Files, Prybar, and large wedge

427   Strip Caulking

428   Pole Pounder makes holes so you can stick small posts in to hang items.

429   Pole Pounder makes holes so you can stick small posts in to hang items.

430   Velcrow and rubber hose cover

431   Tin Snips, threaders, large allen wrench

432   Zip Ties

433   2'' Ball Hitch

434   Weld Craft fittings and torch head.

435   Assortment of sockets

436   1/2'' Drive Eliminator Rachet

437   Plate Lifting Clamp

438   Single Block Pulley

439   Stainless Steel Ladle

440   Large Swivel Eye Hook

441   Assortment of brass valves and fittings

442   1 Ton Plate Lifting Clamp

443   3 Ton Lifting clamp.

444   Ridgid Pipe Threader

445   3/4 Ratcheting Chain Hoist

446   Shackles and Safety Clip

447   Arcair Welding lead

448   Arcair 3000 Welding Lead

449   Ratcheting chain hoist

450   Ratcheting Chain Hoist

451   Large 15ft Log Chain

452   Overload Protection 2 Ton Chain Hoist

453   Overload Protection 2 Ton Chain Hoist

454   5 Large Pry Bars

455   Rachet with flat steel end to pry apart

456   Rachet with eye hooks

457   Rachet with eye hooks

458   Assortment of clamps

459   1 Ton Hoist

460   Large Assortment of Lifting Straps

461   Copper Tubing

462   3 work lights

463   Rigid heavy duty 2" to 4" pipe threader

464   Braze fittings

465   Rigid 1-1/8" to 2 pipe threader

466   Xtreme AW 32 hydraulic fluid

467   Pressurized stainless couplers.

468   Rigid 1-1/8" to 2 pipe threader

469   Plastic to pipe clamp sockets, 4" and 2"

470   4 bolt on two hooks

471   Atwood trailer jack 18"tall

472   Atwood trailer jack 18"tall

473   Atwood trailer jack 18"tall

474   Atwood trailer jack 18"tall

475   Hollan trailer jack 27"T

476   Guardian 6-ton bottle jack

477   Trailer jack with wheel

478   Bottle jack

479   20-ton bottle jack

480   Larin 20-ton bottle jack

481   Pelouze heavy duty utility scale

482   Large eye bolts, fasteners, conduit brackets

483   Fig 290 galvanized eye nuts 1/2" and 3/4"

484   Fig 66 mounting brackets for eye hooks

485   Large fig. 295 pipe and hose clamps

486   Fig. 295 pipe and hose clamps

487   Fig. 212 pipe and hose clamps some large and some small

488   Huot drill bit organizer with new industrial bits 1/16"-1/2"

489   Fig. 66 mounting brackets for eye hooks

490   Fig 261 pipe/house clamps

491   Fig 66 mounting brackets for eye hooks

492   Huot taps, fractional 1/4-20 to 1"-12.

493   Bucket full of caution tape.

494   Fulton trailer jack with wheel

495   3 hand saws

496   Assortment of tarps

497   4 levels, 1 is 4ft rest are 2ft.

498   Bevel machine

499   Welding lead

500   4-way tire tool

501   Worktable on wheels 96"Lx44"Wx34"T, steel frame with wood top

502   Steel plasma cutting table 86"Lx48"Wx32"T

503   Shop/tool carts, 5 drawers, 32"Wx34"T

504   Torch hoses with gauges

505   220V cord approx 100ft

506   Metal cabinet 73:"Tx65"Wx18" d with paint and painting supplies, paint trays, spray gun

507   Retractable air hose

508   Misc. L-chanel, diamond plate, and misc. metal

509   Grip latch ball bearing toolbox 35"Tx27"Wx 18"D

510   Torch house with gauges

511   45pc tap and die set some pieces missing.

512   Plug ins and outlets.

513   B-line brackets

514   Torch hoses

515   Welding lead

516   Solder Brass Ts and fittings.

517   Xpress LD-C apollo press fig. 800 3" couplings with stop.

518   Solder Brass Ts, elbows, and fittings.

519   Solder Brass Ts, elbows, and fittings.

520   Eye hooks, clevis, hooks, lifting eyes large and small.

521   Folding heavy duty job box on casters 60"Lx14"W, folds out to 90 degrees and can be locked when closed.

522   Large assortment of brass, fittings, ball valves, Polly pressed, Ts, misc.

523   Shop cart on casters 24"Wx33.5"Lx31"T

524   Misc plex glass

525   Brass Fittings

526   Sheets of steel some pieces have been cut out 126"Lx60"W 3/8"Thick, 1pc 3/4" thick.

527   Large assortment of welding leads

528   Metal job box 30"Dx48"Wx38"T can be locked on rolling frame.

529   Yard tools, brooms, shovels, spade shovels, pitch forks, fire extinguishers

530   Roll of fire-resistant paper, 3 metal chairs.

531   Shop-vac 6 gallons.

532   Hilti VC 150-10X vac

533   Heavy duty steel dolly on casters

534   2 Breaker bars 35" and 40" long

535   2 sledgehammers

536   Rubber stripping

537   Metal cabinet with wood top work bench on casters, 4 door cabinet 2 on each side, size of Tabe: 80"Lx45"Wx39"T

538   Rubber stripping

539   Greenlee 777 segment bender 1-1/4 thru 4"

540   Stainless fittings, elbows, collars, nuts, and bolts, grinding wheels, misc. stainless.

541   Stainless fittings, elbows, collars, clamps, approx 28" of aluminum I-beam, totes, tote lids, misc metal

542   Large assortment of stainless clamps of various size, valves, misc. metal

543   Rubber stripping

544   Machine leveling feet are large and small.

545   Drill bits, grinding wheels, screws.

546   Hand trials and grinding wheels.

547   Wooden shelf with metal frame 120"L x 78"Tx28"D, 2 shelves stacked together could be used as work benches.

548   Large assortment of casters large and small

549   Casters and machine leveling feet.

550   Anchor bolts, pin bolts, screws, washers, lock washers, locking nuts, misc. hardware.

551   Caster wheels and others

552   Metal shelf 72.5"Lx44"Tx15"D contents not included.

553   Tote full of Roller Wheels and Casters

554   Screws, hex nuts, carriage bolts, nylon hardware, misc. hardware

555   Hardware, nuts, bolts, screws, 24 compartment hardware organizer.

556   Hardware, T-bolts, clamps, bolts, washers, nuts, 24 compartment hardware organizer.

557   Hardware, screws, plastic covers, tapered head, lock nuts, 44 compartment hardware organizer.

558   Hardware, screws, lags, washers, wing nuts, bolts, 44 compartment hardware organizer.

559   Self-tapping screws, 5/8" galvanized bolts and nuts, 7/8 galvanized nuts, anchors, misc. hardware

560   Nelson studs, 1" heavy nuts, anchors, 3/4" galvanized nuts washer and bolts, misc. hardware

561   Metal shelf 85"Tx48"Wx16"D contents not included.

562   Misc. hardware, washers, bolts, hooks, nuts, clamps 80 compartment hardware organizer with stand.

563   Misc. hardware, washers, bolts, nuts, and 80 compartment hardware organizer with stand.

564   Green clamps, alum handles, cable clamps, big bolts, misc hardware and totes

565   U-bolts and eye hook bolts

566   Large assortment of welding wire, tig wire, stainless steel wire and others

567   2 boxes sure weld E6011 3/32 welding rods 50lbs each.

568   2 boxes sure weld E6011 1/8 welding rods 50lbs each.

569   Sure weld 7014 welding rods partial box

570   ESAB E6011 3/16 welding rods 2 boxes 50lbs each

571   Sure, weld E7024 5/32 welding rods 50lbs, and other lubricants

572   Inconel 112 welding rods, misc. welding rods

573   Lincoln electric 50lbs of E6010 welding rods

574   Misc. welding rods c-276, 316-16L & others

575   Welco alloy wire and others

576   Old fridge used as storage cabinet 3 doors, 78"Lx69"Tx31"D contents not included.

577   Tote full of Stainless Ts, elbows, and other fittings.

578   Stainless elbows, collars, and other fittings

579   3 outlet extension cord and air hose

580   Starrett saw blade, 13ft 6" in length, 1"wide, 4-6T teeth size, 2 new 1 used.

581   2 new saw blades 12ft 6in in length, 1" width, 6-10T teeth

582   3 new saw blades 12ft 6in in length, 1" width, 6-10T teeth

583   2 chain wrenches

584   Libman broom

585   6" vise

586   Shop-vac 6-gallon, 2 Rubbermaid water jugs.

587   Flat shovel, garden spade shovel

588   8ft wooden folding table

589   Lifetime 4ft white folding table

590   Metal filing cabinet, 4 drawers, 25"Dx15"Wx52"T

591   Metal filing cabinet, 4 drawers, 25"Dx15"Wx52"T

592   Wooden cabinet, 5 shelves, 72"Tx15"Dx30"W

593   Antique trunk, 36"W x 18"D

594   Antique steamer trunk 34"W x 24"T

595   Coat/hat rack 71"T.

596   Stainless pot with lid

597   Wooden worktable 10ft L x 28"D x 39"Tand contents, rubber stripping, paint brushes, hardware, chains, misc.

598   Dolly

599   Fire Extinguisher 2024

600   Sears Craftsman toolbox 52"T x 18"D x 26.5"L

601   5W-50 motor oil, antifreeze/coolant, engine oil, windshield wiper fluid.

602   all-purpose cement, belt conditioner, epoxy adhesive paste, jack handles

603   Elbows, screw in fittings, pipe thread sealant, misc. parts

604   Brake fluid, silicone, liquid nails, misc. sealants.

605   Sealant, funnel, opened bags of grout, hand saws, misc.

606   Coolant, brass cleaner, lubricants, funnel, misc metal

607   80W-90 turbo multi gear oil, misc. metal

608   Steel fittings, mostly Ts

609   Steel fittings, 1/4",1/2", 1" and other size 90-degree elbows

610   Steel fittings, some brass, valves, misc. metal

611   Steel fittings, collars, valves, psi gauges, misc.

612   Psi gauges, steel spacers, elbows, misc bearings

613   Temp. gauges, rubber stripping, cleaner, misc.

614   truck/trailer lights, grout, light collars, misc

615   control valve, psi gauges, trailer lights, steel spacers, large fittings.

616   Steel fittings, collars, psi gauges, valves, misc. fittings

617   Steel fittings

618   Steel fittings

619   Steel fittings

620   Steel fittings, collars, elbows, misc.

621   Steel fittings, elbows, Ts, misc.

622   Steel fittings, elbows, Ts, misc.

623   Steel fittings, collars, Ts, misc.

624   Steel fittings, trailer lights

625   Large assortment of metal, all thread, hinges, flat pieces, misc.

626   large chain, clevis, eye hook ratchet boomers

627   Assortment of safety equipment, harnesses, vest, rope, wire, jumper cables, small chains

628   Partial chains, bungee cords, ratchets

629   Misc. metal

630   Details Coming Soon

631   Metal desk 3 drawers 1 cabinet, 60"Wx34"Dx31"T

632   Metal table with shelf and 3 drawers, 60"Wx36"Dx40"T buyer bring tools to take apart.

633   First aid kit with misc. supplies

634   Wooden picnic table 72"Lx34"W

635   Metal locker 6 compartments 36"Wx78"Tx15"Dcontents included harness, solo cups, utensils, globe,

636   Lens cleaning towelettes, ear plugs, Task brand wipes.

637   Office chairs and seats

638   Hamilton beach microwave

639   Capri fridge/freezer 58"Tx23"Wx21"D

640   Metal crate approx 32"Wx23"Dx42"L

641   Metal crate approx 32"Wx40"Lx22"D

642   Metal crate approx 32"Wx39"Lx21"D

643   Metal crate 28"Wx74"Lx27"D

644   5/8" thick piece of steel, 3/4" thick steel both have been cut out of

645   Steel pieces both 1/2" and 5/16" thick majority are 5/16" thick, some have pieces cut out of them.

646   5/16" and 1/2" thick steel sheets some have been cut off of

647   3 metal sawhorses 8ft long 34"T

648   2 metal sawhorses 5ft long 33"T

649   2 metal sawhorses 55" long 33"T

650   3 metal sawhorses 8ft long 28"T

651   Steel pipe 1/4"thick 105"Lx16" in diameter

652   1/2" thick steel tubing large piece is 30" in diameter 70"long, others are 8-10" in diameter.

653   Assortment of steel I-beams and other steel 4ft- 10-1/2ft long majority 1/2" thick

654   Steel I-beam 80"Lx12"W and 3/4"thick, Steel I-beam 3/4" thick 46-1/2"Lx 14"W

655   Assortment of I-beams and other steel 4ft-10ft long 1/2" thick, few pieces 3/4" thick

656   I-beam, square tubing 47-1/2" long 6"x8" 1/4" thick, and other steel

657   Assortment of cable, 3/4" steel pipe approx 3ft long

658   10ftWx3ft tall steel stand for metal

659   Assortment of stainless pipes and misc. pieces

660   Assortment of steel I-beams and other steel 1/2" thick 6ft-10ft long

661   Steel beams 5/16" thick approx 12 approx 10ft long, 7ft long steel pipe

662   Metal crate approx 32"Wx23"Dx42"L

663   Misc. metal piping

664   Metal Crate with large Eye Twist Locks and turnbuckles

665   Assortment of Clothesline pole sand misc metal

666   Round piping, 1/4'' 21ft-28ft and some odd sizes

667   Stainless piping

668   Large metal stands to set steel and metal on, 3ft tall, 10ft wide.

669   Large Air Tank

670   Large Winch

671   Toolbox, electric charger, hose, and electric power washer

672   Large Chain Hoist

673   4 Stainless Steel Tanks, Heavy Duty

674   Pallet of Misc Ts, Clamps, fittings, Pipe Sleeves, and other misc metal

675   Weg AF-10 American Fan Centrifugal Turbo Blower

676   Weg AF-10 American Fan Centrifugal Turbo Blower

677   Misc metal and iron

678   8 Metal Stands, 5ft Tall

679   Large Assortment of square tubing, 1/4'', Angle Iron, and steel, 3/4'' thick, pcs are 10-20ft long.

680   2 Large I Beams, 1 3/4'' x 1/4'' 14.5ft long.

681   Large I Beams, 1/2'' and 1/4'', 10-15ft long.

682   Large I Beams, 1/2'' and 1/4'', 10-15ft long.

683   2 Large metal stands to set steel and metal on, 3ft tall, 12ft wide.

684   Very large and heavy-duty shackle

685   Misc wire and reinforced piping

686   Stainless box, screwed door

687   3 5/8'' 10ft 25ga tin to run conduit.

688   Assortment of rings

689   Aluminum sign frame, 8ft x 4ft

690   Plexi Glass with metal frames

691   2 Aluminum Sign Frames

692   Rubber belting and plastic walkway strips

693   Pallet of valves, brass, and metal

694   Pallet of Threaded flanges, large quantity

695   Plastic Tote with large assortment of large fittings, 90s, sleeves, and misc metal

696   Tote full of gears and sprockets.

697   Tote with metal sleeves and piping, heavy.

698   2 Large Metal Rollers, 6x 20''

699   2 Rolls of Wire

700   Pipe Hangers and misc trim coil and sheet tin.

701   2 Large Chain Hoist with rollers

702   Pallet of Large shut off valves.

703   Pallet of Misc. Galvanized Pipe

704   Pallet of All kinds of wire and cable

705   Pallet of Threaded flanges, large quantity

706   Metal Frame to bolt on

707   Pallet Forklift Basket, 4ft all platform with rails

708   Pallet of fittings, piping, Ts, and misc metal

709   Pallet with Large Metal 90s and Ts, heavy duty

710   Aluminum pipe adapters and covers.

711   Pallet of misc reinforced piping, 8-12ft long

712   Blue Heavy Duty Forklift Dumping Dumpster

713   Plastic Forklift Tote with lid

714   Assortment of metal, piping, steel, 1 1/2'', 1/4'' pvc, a stainless, pcs from 15ft-17ft long

715   2 Large metal stands to set steel and metal on, 3ft tall, 8ft wide.

716   Plastic roll around dumping cart

717   Misc Jacks and Heavy-Duty Moving Dolly

718   Pallet of misc mostly stainless 90 and 45 piping

719   Metal Crate with hd. wire sides

720   1998 Stainless Steel Tank, heavy duty, Model number 200u

721   3pcs of 16'' Metal Piping

722   Galvanized C Channel and T Iron, 1/8''-1/2'' 4'-22'

723   Galvanized Angle Iron, 1/4''-1/2'', 6''-3'' 10ft-20ft long

724   Galvanized flat bar, 1'' x 12''W, to 1/2'' x 6'' wide, up to 20ft long.

725   Galvanized 2X1/4' 'Angle, 2 1/2 X 1/4'' angle, and square tubing, 2 full lengths of 3x3x3/16'' tubing and partial

726   Galvanized Misc Bars, 2''-3/4'' up to 20ft long

727   Large Quantity of Galvanized Plate, 1/4, 1/2, 3/8, 3/4, misc sizes

728   Galvanized Angle Iron, 3x3 1/4, 4x4 x 1/4, 6 3/8x3 up to 20ft long

729   Galvanized I Beams, 4 full, 2 8'' and 2 6'', and other misc sizes, up to 20ft.

730   Galvanized I Beams 1 full 8'' and other misc sizes, 10'' and 4'.'

731   Stainless Tubing and plate

732   Pallet Fork Extensions, 7ft

733   Galvanized Decking Sheets, 39'' -90'' Long.

734   3/4'' X 10ft x 4ft Steel Plate

735   2 Metal Sawhorses

736   Steel Roofing

737   Torch Cart needs new wheels.

738   6 Trailer/truck tires

739   Trailer and truck tires, 5 bolt rims.

740   Aluminum Tubing and Beam Piping

741   Rolling Frame

742   Plastic Forklift Tote with lid

743   Metal Frame to hold scrap steel.

744   Scaffolding

745   Heavy Duty Cart

746   2 Pallet Forks 36''

747   2 Ladder Platform Safety Stands

748   Bucket with stainless bearings and steel flanges.

749   Hypertherm 1powermax 600 plasma cutter, needs work.

751   Copper Wire

752   All kinds of Seal material

753   1/8'' Teflon ,48x36''

754   Large Plastic Curtains

755   8ft Step Ladder

756   Hardy Herman Man lift, electric raise, have to move around by hand.

757   Plastic Edges to put over metal and sharp objects for rachet straps.

758   All Stainless steel, wire mesh, partial sheet, 1 full sheet of 14ga 1/8'' perforation and 5 sheets of 14ga 304 Stainless 3-4 finish

759   1 full sheet of 1/4'' 304 Stainless Steel Diamond Tread Floor Plate, 4x10ft

760   304 Stainless, 18ga, 4 full sheets and misc pieces, 4x10ft

761   4 Full Sheets of 304 Stainless, 16ga, 4x10ft

762   2 Full Sheets of 304 Stainless, 14ga, 4x10ft, 3 4x5pcs, and other pcs

763   1 Sheet of 11ga 5x10 and 1 Sheet 11ga 4x10 304 Stainless.

764   1 Sheet of 10ga 4x10 304 Stainless

765   5/16'' 4x10 with 2x2 cut out in corner, 6ft x 4ft pc. And other 5/16'' flat steel pcs and 1/4'' 3 1/2x 4 and some 1/2'' 2ft x ft and smaller piece

766   Expanded Metal 3/4 #9, 4x8 and 30'' x 6 1/2ft.

767   All Kinds of Expanded Metal, 7 full sheets 3/4 #9 4ft x 10ft, and 1 sheet of 48x10 #3 metal, 1pc of 1/4'' 4ft x 8ft perforated metal, 1/2'' holes, 2 sheets 4x10 of 3/4 wire mesh and misc other.

768   5 sheets of 1/2'' #13 expanded metal flattened, 5 sheets of 3/4 #9 expanded flattened, 4 sheets of 1/4'' #13 Ga steel and misc pcs.

769   2 10ga 5x10 mild steel sheets, and 2 sheets of 20ga 4x10 mild sheets and misc steel

770   1 4x10 12 ga galvanized, 2 4x10 galvanized 16ga, and 18 ga mild steel 4x10 and 3 16ga galvanized 4' x 4'.

771   Full 1/4'' 5ft x 10ft Tread Plate, 8ft x 5ft 1/8 Tread Plate and other large sizes of 1/4, 3/16, and 1/8 misc lengths

772   6pcs of 14ga full 5x10 sheets, 5x7 1/2 and other misc pieces

773   5 sheets of 5x10 12ga, and 3/16'' 5x4, 5x10 10ga, and other PCs

774   1 full sheet of 3/8 4x10ft, 3x10 x 3/8, 4x8 x 3/8'' and 4x5 3/8'' and other misc pcs

775   6x10 of 3/8'', 4x8ft of 5/8'' and 5x10 of 1/2'' thick steel, and a 3x5 of 1/2'' and misc pcs

776   Metal Storage Frame, 68'' W and 74'' tall

777   8ft Step Ladder

778   2 New Pcs of 3/16th Aluminum 3003 4x10 sheets

779   2 11ga Galvanized sheets, 5x10, and 5x4 and misc galvanized pcs

780   1/4'', 1/8'', and 3/16' 'Aluminum Diamond Plate pcs

781   1 Sheet of 5x10 1/8'' Aluminum 3003

782   1 Sheet of 1/4'' Aluminum Tread Plate 4x10ft and 3/16'' 4x8 and 4x10ft and other pcs

783   Aluminum 1/8'' pcs of 5x7ft and some 4x5, and lots of misc pcs

784   Sheet of 3/16 48'' x 9ft and lot of misc pieces

785   1 1/4'' 4x10pcs of aluminum and misc pcs of aluminum

786   4x10 of 1/2'' and 3x 5 1/2 1/2'' aluminum 6061

787   Full 1'' Mild Steel Plate, 8ft 6'' x 5ft

788   Large Homemade Sheet Steel Rack, made out of I Beams, very heavy Duty 10ft tall and can stack on top that, deep enough for 5ft sheets, (contents not included)

789   Large Homemade Sheet Steel Rack, made out of I Beams, very heavy Duty 8ft tall and can stack on top that, deep enough for 5ft sheets, (contents not included)

790   Large Homemade Sheet Steel Rack, made out of I Beams, very heavy Duty 10ft tall and can stack on top that, deep enough for 5ft sheets, (contents not included)

791   Blue Pallet Racking, buyer removes, 12ft L, 36'' W, and 9ft Tall.

792   Blue Pallet Racking, buyer removes 18ft L, 36'' W, and 9ft Tall.

793   Aluminum I beam, tubing, some full-length and some pcs.

794   Small galvanized flat steel, 1.4 x 2 and 1/4 x 4, all thread.

795   Aluminum piping, most 2'', up to 4'' tubing, lot are full length.

796   Aluminum piping, most full length, 3'' and 4'' pipe

797   Aluminum piping, some stainless, 3'' and 4''

798   Large quantity of galvanized angles, from 1'' to 4'' angles, most are full, different thickness, and bunch of short stainless tubing pcs.

799   All Threads, misc metal, aluminum, flat bar, stainless

800   Flat Steel, 1'' thick, 3/4'' thick full lengths, galvanized as well.

801   3/8 - 1'' Thick Steel pcs, 4'' - 12'' wide

802   Flat Steel, lot of 1/2'' and 3/8'', 2'' solid square, and 1''

803   3/4'' plate, 1/2'' plate, full length, and stainless rods

804   Large quantity of Small I Beams, square tubing, angle iron, c channel, lot of full lengths.

805   Large quality of short ends of all sizes of rectangle and tubing

806   Stainless square tubing, 6x6, 2x4

807   Large quantity of full 4x4 tubes, some pcs but quite a few are full, square tubes.

808   4 pcs of large angle iron

809   4 pcs of large angle iron

810   4 pcs of large angle iron

811   7 pcs of angle iron

812   7 pcs of angle iron

813   8 pcs of iron angle, large and small

814   Large Assortment of angle iron, full length, lot of 1''

815   lot of Full 1 1/2 x 1/4 angle iron, and 3/16 x 2 and 1/4 x 2

816   10 pcs 3/16 and 1/4 angle iron

817   4 Full 3/8'' x 2 1/2 angle iron and 2 full of 3/16 x 3 and other lengths

818   3 Full of 3/8 x 3 angle and pcs

819   Large assortment Large Angle Iron, 3/8 x 4, several full 1/4 3 1/2

820   Large Assortment of Flat Steel, 1/3 x 3 up to 1/2x 4'', several full-length pcs

821   Several pcs of full-length flat steel, 1/8 - 2 1/2, angle iron, several full and some pcs

822   All Kinds of full length of steel straps, 20+ full length 1/4 x 2'', tons of full, 1 x 3/8, 1/4 x 1 1/2, lots of full pcs

823   Copper Pipes, 1/2'' - 2'', 2'' full, 1'' 20ft, and lots of shorter pieces

824   Threaded Pipe

825   Round Piping

826   Large Round Piping

827   Large Round Piping

828   Round Bar from 2''-3/4 Several Full length,

829   2 2'' full length and 1 1/2'' half length

830   Rebar, Pipe, 3/4 and 5/8, all thread, smooth rod and all kinds.

831   Large Assortment of Square Tubing and rectangular, 1/2'' - 3'', lots of full pieces

832   Aluminum square tub and channel iron, lot of full length

833   All Stainless-steel rods, 3/8'' - 3/4 several full length

834   Stainless Steel and aluminum flat pcs, all sizes, multiple full

835   Stainless sanitary tubing, stainless angle iron, square tube, large quantity, lot full length

836   2 3'' copper pipes 1 20ft and 1 10ft

837   Full Solid Round stock, 2'' - 4'' and piping

838   Very Large and Heavy-Duty Steel Rack, Buyer will have to disassemble himself and load, Safety Rack, Ladder, Removable rail to set pallets on top, individual racks, and all kinds of sizes, has a top loft with steel floor as well, (Items in rack do not go with)

839   Scotchman Cold Saw, was in loft, worked 10 years ago when used, 230 volt.

840   like new pipe clamps, rachet straps and misc

841   Freeland Water Trough on rolling dolly

842   Ridgid Tri standpipe Holder

843   Large Ingersoll Rand Air Compressor, was Rebuilt in 2009, haven't used since.

844   Decorative Aluminum Molds

845   Wooden Desk 62'' W x 25'' Deep, 30'' tall

846   2 Office Tables with fold down keypad slot