Larkspur Estate - Part 1
Listing ID#: 687533

Sale Location

Larkspur, CO 80118
Sale Dates and TimesSALE IS COMPLETED
Bidding Starts: Tuesday May 21, 12:00 AM
Bidding Ends: Tuesday May 21, 02:00 PM
Sale Type
 Online Auction 
Company Information
Dickensheet and Associates Inc.

Contact: Christine Dickensheet
Phone: 303-934-8322
Email: sales@dickensheet.com
Website: www.Dickensheet.com

EstateSale.com ID#: 7916
View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
TERMS AND CONDITIONS FOR THIS AUCTION

General Terms and Conditions



All items are offered for sale "AS-IS, WHERE-IS". Dickensheet & Associates, Inc. makes no warranty, guarantee or representation of any kind, expressed or implied, as to the merchantability or fitness for any purpose of the property offered for sale. The Buyer is not entitled to any payment for loss of profit or any other money damages-special, direct, indirect or consequential. Any and all disputes or concerns MUST be addressed prior to the removal of the lot(s) prior to the auction site.

All parties must be over the age of 18 to participate with the auction or be present in the impound yard before, during or after removal.

Bidder is required to provide true, accurate, current and complete information and maintain, promptly update the registration data to keep it true, accurate, current and complete. Please note that the registration address will need to match the address associated with the card utilized during the process to create an account.

Buyer is responsible for all transactions on its account, including without limitation, all bids placed by authorized bidders and bid submitted through the Auctioneer’s bidding platform. Accounts cannot be transferred. In the event of unauthorized use of Buyer’s login information, Buyer is responsible for all bids.

The Auctioneer is acting as agent only and is not responsible for actions of its Principals. The Auctioneer shall assume no liability for representations made, or information provided by the Seller.

By registration, the registered party is authorizing Auctioneer communication via email, landline, or cell/mobile phone including text messaging and/or any other forms of communication or technology now known or created in the future, for any purpose, including general business matters, account information, marketing materials, collections, and/or any other communication needs.

Auctioneer has made every reasonable effort to facilitate online bidding. However, it is possible that technical difficulties and internet issues may arise that affect Auction Company’s website, bidding platform, computer, server or the Bidder’s computer, personal device or software which is beyond the control of Auction Company. By registering, Bidder acknowledges that the Auctioneer is not responsible for any technical difficulties or internet issues associated with a bid and that, in the event technical difficulties interfere with or prevent a bid, it may be necessary to withdraw items from bidding due to technical errors or uncontrollable circumstances. Further, in the event of the occurrence of a technical difficulty during an Auction, Auction Company, in its sole discretion, reserve the right to: (1) declare a Property sold, (2) postpone or cancel the Auction, (3) extend the bidding time for the Auction (which may reopen bidding on closed items, if any) and/or (4) re-list the Property for auction at another date and time. The decision on this matter shall be final. Bidder acknowledges that, by registering for ay auction held by Auction Company, Bidder accepts the terms and conditions of this disclaimer.

This staggered bidding online auction is subject to soft close. If a bid is received shortly before the lot closes, the system will automatically extend the bidding time to allow other bidders an opportunity to competitively bid prior to the auction closing. The method eliminates “snipers” and encourages fair and impartial bidding from all participants.

By law, all auctions are with reserve unless specifically stated to be Absolute per UCC 2-328 and applicable state law.

All parties enter the lot at their own risk. Neither Dickensheet & Associates, inc. nor the Seller(s), Landlord is responsible for personal injury or lost items regarding this auction including inspection (if applicable) and removal.

Persons removing the goods assume all risks of damage or loss to person and property and specifically release Dickensheet & Associates, Inc., Seller(s), Landlord from liability. Therefore, neither Dickensheet & Associates, Inc, Seller(s), Landlord, nor its principal(s), shall be liable by reason of any defect in, or condition of premises on which auction is held.

Default shall include: (1) failure to observe these terms & conditions; (2) failure to make good and timely payment; or (3) failure to remove all items within the specified time. Default will result in the suspension from participation in all future sales. If the Buyer fails in the performance of their obligations, Dickensheet & Associates, Inc. may exercise such rights and may pursue such remedies as are provided by law.

By submitting a bid, the bidder agrees that they have read, fully understand and accept these Terms & Conditions of Online Sales, and agree to pay for and remove the property, if the bid is accepted, by the dates and times specified.

PAYMENT TERMS AND CONDITIONS

PLEASE REVIEW THE DETAILS SECTION FOR THE TYPE OF PAYMENT BEING ACCEPTED AT THIS PARTICULAR AUCTION.

THE FOLLOWING REPRESENTS THE VARIETY OF ACCEPTABLE PAYMENTS FOR THE VARIETY OF AUCTIONS CONDUCTED BY AUCTIONEER:

WIRE TRANSFERS-All wire transfers would need to be completed by successful bidders to assure the payment is noted in Auctioneer’s account prior to removal stated time period.

CARD PAYMENTS-Visa, Mastercard and Discover will be accepted as a form of payment for this particular auction for purchasers under $1,000.00 with a convenience fee as outlined in the Terms & Conditions during the registration process. Please note that by utilizing a card that the paperwork would need to be issued as registered into the system (for name etc). When reviewing statements on the account, Dickensheet & Associates, Inc. will be processing payment on the items purchased for the auction. On certain auctions, no automatic payments are processed. To use a credit card, buyer must contact Auctioneer to authorize charge.

CASH-VECTRA BANK-Cash transactions can be accepted at Vectra Bank locations throughout Colorado following the auction. Please call 303-934-8322 for further information on completion.

Please utilize the information below for the Vectra Bank location nearest to you.

Vectra Bank Colorado Branch and ATM Locations

CASH-WESLEY LOCATION-Cash transactions can also be accepted at Dickensheet & Associates, Inc., 1501 W Wesley Avenue, Denver, CO 80223.

CASH-On selected auctions, cash payments may be accepted on site. Please bring exact change. Thank you.

PREAPPROVED BUSINESS/PERSONAL CHECKS-Please call 303-934-8322 prior to participating with the auction for funds verification process.



These terms and conditions provide clarity and ensure that all participants are well-informed about the auction process and their responsibilities.
Listing Information

LARKSPUR-PART I-Metal Machinery, Machinery & Inspection Tools, Other Tools and More

On Behalf Of An Estate
Date: Tuesday, May 21st - 2:00 PM
INSPECTION: Tuesday, May 21st 10AM-12PM
PAYMENT DEADLINE: Card, Cashiers Check, Wire Transfer (if received no later than deadline), Cash at either Vectra Bank or Dickensheet & Associates, Inc, 1501 W Wesley Avenue, Denver, CO 80223
REMOVAL ONLY: Thursday, May 23rd 9AM-5PM MT
Location: Larkspur, CO 80118
Click here to see a map of the location

Please note that there are residence to the location.
PLEASE DO NOT UTILIZE FRONT DOOR-GARAGE ENTRANCE ONLY. THANK YOU!

Payment:
CASH, DEBIT/CREDIT CARD UTILIZED DURING REGISTRATION , WIRE TRANSFER ,  CERTIFIED/ PREAPPROVED CHECK . 
Credit or Debit Cards are subject to an additional 4% convenience fee.

ANY PAYMENTS NOT RECEIVED TWO HOURS PRIOR TO THE END OF THE REMOVAL TIME PERIOD-The card utilized for registration will be charged.

If the card is approved-a paid invoice will be sent to the email utilized for registration. If the purchased lots are not removed during the stated time period, the purchaser agrees that they have abandoned the items and the transaction is not applicable for a dispute to be presented to the card provider.

If the card is declined, Auctioneer shall have the discretion to resell the lots and revoke bidding privileges to registered party.

13 % buyer's premium on all purchases.
Sales Tax: 4%

All lots are offered for sale "AS-IS, WHERE-IS". Purchaser is responsible for full payment and removal (including with proper tools, assistance, boxes etc) within the time period outlined above.

Dickensheet & Associates, Inc.
1501 West Wesley Avenue
Denver, CO 80223
Telephone: (303) 934-8322
Toll Free: (877) 284-0338
Fax: (303) 934-8252
E-mail: customerservice@dickensheet.com

0A
LARKSPUR, CO-INSPECTION/PAYMENT/REMOVAL-
Please note that there are residence to the location. PLEASE DO NOT UTILIZE FRONT DOOR-GARAGE ENTRANCE ONLY. THANK YOU!
INSPECTION: Tuesday, May 21st 10AM-12PM
PAYMENT DEADLINE: Card, Cashiers Check, Wire Transfer (if received no later than deadline), Cash at either Vectra Bank or Dickensheet & Associates, Inc, 1501 W Wesley Avenue, Denver, CO 80223
REMOVAL ONLY: Thursday, May 23rd 9AM-5PM MT

0B
SKID STEER LOADER LOCATED AT THE RESIDENCE-
Skid steer loader is located at the residence to assist with larger machinery for loading on a first come, first serve basis with signature on a loading release. Please call 303-934-8322 to receive a copy of the release or to make an inquiry on COI needed for successful purchaser for supplying their own equipment on site utilized for loading.

1
FRAY TYPE 10-R MILLING MACHINE-

SN: 1530, TYPE 4 - 36 x 9 inch T slotted table. Extra power head. PLEASE NOTE THAT THE MILLING MACHINE WAS NOT CONNECTED AT THE RESIDENCE. 


2
KURT 0675-107528 VISE-

6 inch steel jaws, AS PHOTOGRAPHED


3
STARRETT SURFACE PLATE

WITH COVER-APPROX. 24"X30"X6”. PLATE: 724134, SURFACE PLATE CLEANERS


4
MICROMETERS LOT IN CASES INCLUDING-
MITUTOYO APB-4B MICROMETER, 0-1" MICROMETER, AND TWO ADDITIONAL IN LOT

5
STARRETT NO. 98 MACHINIST LEVEL
IN CASE-

6
STARRETT, MITUTOYO INSPECTION TOOLS
IN CASES AS PHOTOGRAPHED-

7
GAGE SETS LOT-
STARRETT RADIUS GAGE SET, MITUTOYO RADIUS GAGE SET, FOWLER RADIUS GAGE SET

8
SURFACE PLATE SQUARE, WRENCHES, CENTER PUNCHES-
BROWN AND SHARP TOOLMAKER SURFACE PLATE SQUARE, (2) T-HANDLE TAP WRENCHES, (2) CENTER PUNCH - (6) ITEMS TOTAL

9
DRILL BITS LOT INCLUDING
(2) ACCUPRO 78088572 DRILL BITS, AND (2) ITA DRILL BITS-(4) ITEMS TOTAL

10
SHARS NMTB 30X1-70 TOOL HOLDER IN
CLEAR CONTAINER, AND (1) CRITERION DBL-202 BORING HEAD-(2) ITEMS TOTAL

11
JACOBS AND BALL SUPER CHUCK-
0-1/2", NO. 11N 0-3/8", NO. 3 0-17/32", 6B 0-1/2", 6A 2A TAPE 0-1/2"-(6) ITEMS TOTAL

12
MACHINERY AND TOOLING LOT-

SOME APPEAR NEW - COLLETS LOT IN 2ND DRAWER TO LEFT TOOL BOX 1 2nd DRAWER LEFT SIDE.


13
LOT OF MACHINE TOOLING BITS, CUTTERS, LATHE STOPS-

LOT OF MACHINE TOOLING BITS, TOOL HOLDERS AND MORE -TOOL BOX 1 3RD DRAWER DOWN ON LEFT


14
SPL 30-933-6 AND PIN SET LOT-

SPL 30-933-6 AND PIN SET IN CASES AS PHOTOGRAPHED. TOOL BOX 2 5 drawer left side


15
MAGIC CUTTING FLUID LOT-
MAGIC CUTTING FLUID LOCATED IN DRAWER AS PHOTOGRAPHED

16
MACHINERY/ TOOLING LOT-VARIOUS

17
STARRETT 9 INCH HEIGHT GAGE

Includes 14 inch height gage-


18
GAGE BLOCKS, VICES, PINS LOT-
HOKE PRATT AND WHITNEY PRECISION GAGE BLOCKS IN WOOD BOX, PYH TOOLMAKER VISE, VERMONT PINS IN CASE (NEXT DRAWER DOWN) - (3) ITEMS TOTAL

19
LARGE LOT OF INTERSTATE AND OTHER REAMERS-
THIRD SMALL DRAWER ON RIGHT

20
LOT OF VARIOUS STEEL STAMPS, LETTERS AND NUMBERS-
LOT OF VARIOUS STEEL STAMPS, LETTERS AND NUMBERS, FOURTH DRAWER DOWN ON RIGHT SIDE

21
MACHINE TOOLING LOT-
FIFTH DRAWER DOWN ON RIGHT AS PHOTOGRAPHED

22
QUICK CHANGE TOOL HOLDER-

23
BEAUTIFUL WOOD MACHINIST CASE-
H. GERSTNER AND SONS MACHINIST CASE

24
COLLETS WITH RELIANCE 5c COLLETT STAND LOT-
COLLECTION WITH RELIANCE 5c COLLETT STAND AS PHOTOGRAPHED

25
BROWN AND SHARP BLOCK DIGITAL CALIPER GAGES AND INSPECTION TOOLS-
FIRST DRAWER OF GENERAL CABINET FACING GARAGE DOOR 

26
PRECISION DRILL BITS
IN GREEN CASE-LOT OF (8)

27
UNION BUTTERFIELD DRILL BITS LOT
IN BLUE CASE-QUANTITY (17) 

28
LOT OF BITS AND END MILLS SANDING SUPPLIES-
FIRST HALF OF DRAWER ON LEFT OF GENERAL TOOL BOX

29
STARRETT MICROMETER SET-
IN SECOND HALF OF DRAWER ON LEFT

30
STARRETT PARALLELS, T-HANDLES, INSPECTION TOOLS LOT-
THIRD DRAWER ON LEFT

31
LOT OF TOOLING-
TOOLING IN FIRST TWO HALF DRAWERS ON RIGHT

32
AIR COMPRESSOR-
PORTER CABLE 150 PSI AIR COMPRESSOR, 6 GALLON

36
DELTA VERTICAL BANDSAW-

S/N: HI-00285 CAT#: 2640. 12 inch throat


37
GRANT ULTRASONIC CLEANER / WATER BATH-
MODEL: W28

38
RC5C COMM/IND CENTRIFUGE - SORVELL INSTRUMENTS-
RC5C COMM/IND CENTRIFUGE - SORVELL INSTRUMENTS

39
GRIZZLY 2" BELT SANDER/ 6" GRINDER-
GRIZZLY 2" BELT SANDER/ 6" GRINDER - NEW IN BOX

40
NIKON PROFILE PROJECTOR-

Needs reassembled


41
MACHINE VICE 6 INCH WITH JAWS-

42
BROWN & SHARPE 9 INCH RISER BLOCK IN CASE-

43
RALMIKES COMPOUND MAGNETIC SINE PLATE

Includes ll angle block clamp vice-


44
US DEPT. OF DEFENSE SKW GENERATOR-
MODEL #: MEP 002A, S/N: K2 15008, DOM: 1981, SINGLE PHASE, MANUFACTURED BY: JR HOLLINGSWORTH, WITH EXTERNAL 50 GAL. FUEL TANK - NOT CONNECTED

45
INSPECTION EQUIPMENT LOT-

V blocks, setup blocks, right angle block


46
KRANZLE 1120T PORTABLE PRESSURE WASHER-
KRANZLE 1120T PORTABLE PRESSURE WASHER

47
BROWN & SHARPE SETUP BLOCKS IN CASE-

48
STARRETT INSIDE MICROMETER, DEPTH GAGES-

49
HORIZONTAL 4 FT. BANDSAW
ON ROLLING CART-

50
ATLAS 7B METAL SHAPER-
ATLAS 7B METAL SHAPER

51
CLAUSING 16ST FLOOR PEDESTAL DRILL PRESS-

S/N: 111426. 8 inch throat


52
SO CKD1 UPRIGHT GRINDING MACHINE-
S/N: 89-24243 WITH GREEN CABINET AND TOOLING IN CABINET 

53
INSPECTION EQUIPMENT LOT-

Digital mic, pin gages, tap extractors


54
SOUTHBEND CL 187ZB LATHE

ON CABINET, CL187ZB- includes 6 inch 4 jaw chuck, 6 & 4 inch 3 jaw chuck, 6 & 7 inch face plate, live center, tail stock, steady rest, colletts.


55
LOT PRECISION DRILL BITS-
LOT PRECISION DRILL BITS AS PHOTOGRAPHED

56
BALDOR DOUBLE HEAD BUFFER
ON 4 FT. PEDESTAL-

57
INSPECTION EQUIPMENT LOT-

Hole gage, sine block, hole gages


58
HARIG SUPER 612 SURFACE GRINDER

Includes Ceramsx 6x12 inch magnetic chuck. WITH GRINDING WHEELS IN SHELF-


59
RED UPRIGHT JACK, BLUE J BAR LOT-
RED UPRIGHT JACK AND BLUE J BAR

60
TROYKE 12x12 INCH ROTARY TABLE-

T Slotted table


61
LOT OF JUSTRITE SAFETY CANS-
3 GAL. SAFETY CANS - METAL

62
MHC STEEL PLUG GAGE SET IN CASE-
MHC STEEL PLUG GAGE SET - MISSING 1

63
MHC STEEL PLUG GAGE SET IN CASE-
MHC STEEL PLUG GAGE SET .626-.750

64
MHC STEEL PLUG GAGE SET IN CASE-
MHC STEEL PLUG GAGE SET .751-.832

65
(2) -58 PIECE STEEL CLAMPING KITS-
58 PIECE STEEL CLAMPING KIT

66
BROWNE AND SHARPE 583 HITE SET-

BROWNE AND SHARPE 583 HITE SET IN CASE. INCLUDES 9” RISER BLOCK


67
MTI 5" SINE VISE IN CASE-
MTI 5" SINE VISE

68
BELT & DISK SANDER ONLY-

69
HARIG GRIND ALL 1 RADIUS DRESSER IN CASE-
HARIG GRIND ALL 1 RADIUS DRESSER

70
HTP ARTIC CHILL WATER COOLER 70221-
NEW IN BOX, WITH COOLANT

71
SYBRON THERMOLYNE 1400 FURNACE-
SYBRON THERMOLYNE 1400 FURNACE

72
PHASE II 12 INCH T SLOTTED ROTARY TABLE-

PHASE II 12 INCH SLOTTED CIRCULAR MILLING ROTARY TABLE


73
LOT OF ASSORTED AUTO SUPPLIES
on (2) shelves- wiper fluid, truck top bag, antifreeze, oil

74
INDEXING / DIVIDING HEAD-
RUSTED

75
SEARS BATTERY CHARGER-
SEARS BATTERY CHARGER

76
RED 6" HD DOUBLE HEAD VISE WITH ROTATING HEAD-
RED 6" HD VISE WITH TURNING HEAD

77
6" HEAVY DUTY SWIVEL VISE-
6" HEAVY DUTY VISE

78
MILLER TAG-A-LONG CADYMATE
AS PHOTOGRAPHED-

81
ASSORTMENT OF CONTROLS as photographed-

82
SHOP CRANE 2 TON-

83
NO. 2 ARBOR PRESS-

84
TOOL HOLDERS LOT-
Boring head, face mill, tool holder

85
DURACRAFT BENCH MOUNTED DOUBLE END GRINDER-

86
LOT OF (3) RADIUS GAGE SETS-

87
CARBIDE BITS & INDEXABLE TURNING TOOL HOLDERS LOT-

88
MICHELIN 3 1/2 TON AUTOMOTIVE FLOOR JACK-

89
STEEL STOCK LOT-

90
MACHINE SUPPLIES LOT-

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend







Sponsored Links

Larkspur Estate - Part 1

Dickensheet and Associates Inc.

Dickensheet and Associates Inc.


Contact: Christine Dickensheet
Phone: 303-934-8322
Sale Location
1662 Gore Dr.
Larkspur, CO 80118
Sale Dates and Times
Sale Terms and Conditions
TERMS AND CONDITIONS FOR THIS AUCTION
General Terms and Conditions

All items are offered for sale "AS-IS, WHERE-IS". Dickensheet & Associates, Inc. makes no warranty, guarantee or representation of any kind, expressed or implied, as to the merchantability or fitness for any purpose of the property offered for sale. The Buyer is not entitled to any payment for loss of profit or any other money damages-special, direct, indirect or consequential. Any and all disputes or concerns MUST be addressed prior to the removal of the lot(s) prior to the auction site.
All parties must be over the age of 18 to participate with the auction or be present in the impound yard before, during or after removal.
Bidder is required to provide true, accurate, current and complete information and maintain, promptly update the registration data to keep it true, accurate, current and complete. Please note that the registration address will need to match the address associated with the card utilized during the process to create an account.
Buyer is responsible for all transactions on its account, including without limitation, all bids placed by authorized bidders and bid submitted through the Auctioneer’s bidding platform. Accounts cannot be transferred. In the event of unauthorized use of Buyer’s login information, Buyer is responsible for all bids.
The Auctioneer is acting as agent only and is not responsible for actions of its Principals. The Auctioneer shall assume no liability for representations made, or information provided by the Seller.
By registration, the registered party is authorizing Auctioneer communication via email, landline, or cell/mobile phone including text messaging and/or any other forms of communication or technology now known or created in the future, for any purpose, including general business matters, account information, marketing materials, collections, and/or any other communication needs.
Auctioneer has made every reasonable effort to facilitate online bidding. However, it is possible that technical difficulties and internet issues may arise that affect Auction Company’s website, bidding platform, computer, server or the Bidder’s computer, personal device or software which is beyond the control of Auction Company. By registering, Bidder acknowledges that the Auctioneer is not responsible for any technical difficulties or internet issues associated with a bid and that, in the event technical difficulties interfere with or prevent a bid, it may be necessary to withdraw items from bidding due to technical errors or uncontrollable circumstances. Further, in the event of the occurrence of a technical difficulty during an Auction, Auction Company, in its sole discretion, reserve the right to: (1) declare a Property sold, (2) postpone or cancel the Auction, (3) extend the bidding time for the Auction (which may reopen bidding on closed items, if any) and/or (4) re-list the Property for auction at another date and time. The decision on this matter shall be final. Bidder acknowledges that, by registering for ay auction held by Auction Company, Bidder accepts the terms and conditions of this disclaimer.
This staggered bidding online auction is subject to soft close. If a bid is received shortly before the lot closes, the system will automatically extend the bidding time to allow other bidders an opportunity to competitively bid prior to the auction closing. The method eliminates “snipers” and encourages fair and impartial bidding from all participants.
By law, all auctions are with reserve unless specifically stated to be Absolute per UCC 2-328 and applicable state law.
All parties enter the lot at their own risk. Neither Dickensheet & Associates, inc. nor the Seller(s), Landlord is responsible for personal injury or lost items regarding this auction including inspection (if applicable) and removal.
Persons removing the goods assume all risks of damage or loss to person and property and specifically release Dickensheet & Associates, Inc., Seller(s), Landlord from liability. Therefore, neither Dickensheet & Associates, Inc, Seller(s), Landlord, nor its principal(s), shall be liable by reason of any defect in, or condition of premises on which auction is held.
Default shall include: (1) failure to observe these terms & conditions; (2) failure to make good and timely payment; or (3) failure to remove all items within the specified time. Default will result in the suspension from participation in all future sales. If the Buyer fails in the performance of their obligations, Dickensheet & Associates, Inc. may exercise such rights and may pursue such remedies as are provided by law.
By submitting a bid, the bidder agrees that they have read, fully understand and accept these Terms & Conditions of Online Sales, and agree to pay for and remove the property, if the bid is accepted, by the dates and times specified.
PAYMENT TERMS AND CONDITIONS
PLEASE REVIEW THE DETAILS SECTION FOR THE TYPE OF PAYMENT BEING ACCEPTED AT THIS PARTICULAR AUCTION.
THE FOLLOWING REPRESENTS THE VARIETY OF ACCEPTABLE PAYMENTS FOR THE VARIETY OF AUCTIONS CONDUCTED BY AUCTIONEER:
WIRE TRANSFERS-All wire transfers would need to be completed by successful bidders to assure the payment is noted in Auctioneer’s account prior to removal stated time period.
CARD PAYMENTS-Visa, Mastercard and Discover will be accepted as a form of payment for this particular auction for purchasers under $1,000.00 with a convenience fee as outlined in the Terms & Conditions during the registration process. Please note that by utilizing a card that the paperwork would need to be issued as registered into the system (for name etc). When reviewing statements on the account, Dickensheet & Associates, Inc. will be processing payment on the items purchased for the auction. On certain auctions, no automatic payments are processed. To use a credit card, buyer must contact Auctioneer to authorize charge.
CASH-VECTRA BANK-Cash transactions can be accepted at Vectra Bank locations throughout Colorado following the auction. Please call 303-934-8322 for further information on completion.
Please utilize the information below for the Vectra Bank location nearest to you.
Vectra Bank Colorado Branch and ATM Locations
CASH-WESLEY LOCATION-Cash transactions can also be accepted at Dickensheet & Associates, Inc., 1501 W Wesley Avenue, Denver, CO 80223.
CASH-On selected auctions, cash payments may be accepted on site. Please bring exact change. Thank you.
PREAPPROVED BUSINESS/PERSONAL CHECKS-Please call 303-934-8322 prior to participating with the auction for funds verification process.

These terms and conditions provide clarity and ensure that all participants are well-informed about the auction process and their responsibilities.
Listing Details

LARKSPUR-PART I-Metal Machinery, Machinery & Inspection Tools, Other Tools and More

On Behalf Of An Estate
Date: Tuesday, May 21st - 2:00 PM
INSPECTION: Tuesday, May 21st 10AM-12PM
PAYMENT DEADLINE: Card, Cashiers Check, Wire Transfer (if received no later than deadline), Cash at either Vectra Bank or Dickensheet & Associates, Inc, 1501 W Wesley Avenue, Denver, CO 80223
REMOVAL ONLY: Thursday, May 23rd 9AM-5PM MT
Location: Larkspur, CO 80118
Click here to see a map of the location

Please note that there are residence to the location.
PLEASE DO NOT UTILIZE FRONT DOOR-GARAGE ENTRANCE ONLY. THANK YOU!

Payment:
CASH, DEBIT/CREDIT CARD UTILIZED DURING REGISTRATION , WIRE TRANSFER ,  CERTIFIED/ PREAPPROVED CHECK . 
Credit or Debit Cards are subject to an additional 4% convenience fee.

ANY PAYMENTS NOT RECEIVED TWO HOURS PRIOR TO THE END OF THE REMOVAL TIME PERIOD-The card utilized for registration will be charged.

If the card is approved-a paid invoice will be sent to the email utilized for registration. If the purchased lots are not removed during the stated time period, the purchaser agrees that they have abandoned the items and the transaction is not applicable for a dispute to be presented to the card provider.

If the card is declined, Auctioneer shall have the discretion to resell the lots and revoke bidding privileges to registered party.

13 % buyer's premium on all purchases.
Sales Tax: 4%

All lots are offered for sale "AS-IS, WHERE-IS". Purchaser is responsible for full payment and removal (including with proper tools, assistance, boxes etc) within the time period outlined above.

Dickensheet & Associates, Inc.
1501 West Wesley Avenue
Denver, CO 80223
Telephone: (303) 934-8322
Toll Free: (877) 284-0338
Fax: (303) 934-8252
E-mail: customerservice@dickensheet.com

0A
LARKSPUR, CO-INSPECTION/PAYMENT/REMOVAL-
Please note that there are residence to the location. PLEASE DO NOT UTILIZE FRONT DOOR-GARAGE ENTRANCE ONLY. THANK YOU!
INSPECTION: Tuesday, May 21st 10AM-12PM
PAYMENT DEADLINE: Card, Cashiers Check, Wire Transfer (if received no later than deadline), Cash at either Vectra Bank or Dickensheet & Associates, Inc, 1501 W Wesley Avenue, Denver, CO 80223
REMOVAL ONLY: Thursday, May 23rd 9AM-5PM MT

0B
SKID STEER LOADER LOCATED AT THE RESIDENCE-
Skid steer loader is located at the residence to assist with larger machinery for loading on a first come, first serve basis with signature on a loading release. Please call 303-934-8322 to receive a copy of the release or to make an inquiry on COI needed for successful purchaser for supplying their own equipment on site utilized for loading.

1
FRAY TYPE 10-R MILLING MACHINE-

SN: 1530, TYPE 4 - 36 x 9 inch T slotted table. Extra power head. PLEASE NOTE THAT THE MILLING MACHINE WAS NOT CONNECTED AT THE RESIDENCE. 


2
KURT 0675-107528 VISE-

6 inch steel jaws, AS PHOTOGRAPHED


3
STARRETT SURFACE PLATE

WITH COVER-APPROX. 24"X30"X6”. PLATE: 724134, SURFACE PLATE CLEANERS


4
MICROMETERS LOT IN CASES INCLUDING-
MITUTOYO APB-4B MICROMETER, 0-1" MICROMETER, AND TWO ADDITIONAL IN LOT

5
STARRETT NO. 98 MACHINIST LEVEL
IN CASE-

6
STARRETT, MITUTOYO INSPECTION TOOLS
IN CASES AS PHOTOGRAPHED-

7
GAGE SETS LOT-
STARRETT RADIUS GAGE SET, MITUTOYO RADIUS GAGE SET, FOWLER RADIUS GAGE SET

8
SURFACE PLATE SQUARE, WRENCHES, CENTER PUNCHES-
BROWN AND SHARP TOOLMAKER SURFACE PLATE SQUARE, (2) T-HANDLE TAP WRENCHES, (2) CENTER PUNCH - (6) ITEMS TOTAL

9
DRILL BITS LOT INCLUDING
(2) ACCUPRO 78088572 DRILL BITS, AND (2) ITA DRILL BITS-(4) ITEMS TOTAL

10
SHARS NMTB 30X1-70 TOOL HOLDER IN
CLEAR CONTAINER, AND (1) CRITERION DBL-202 BORING HEAD-(2) ITEMS TOTAL

11
JACOBS AND BALL SUPER CHUCK-
0-1/2", NO. 11N 0-3/8", NO. 3 0-17/32", 6B 0-1/2", 6A 2A TAPE 0-1/2"-(6) ITEMS TOTAL

12
MACHINERY AND TOOLING LOT-

SOME APPEAR NEW - COLLETS LOT IN 2ND DRAWER TO LEFT TOOL BOX 1 2nd DRAWER LEFT SIDE.


13
LOT OF MACHINE TOOLING BITS, CUTTERS, LATHE STOPS-

LOT OF MACHINE TOOLING BITS, TOOL HOLDERS AND MORE -TOOL BOX 1 3RD DRAWER DOWN ON LEFT


14
SPL 30-933-6 AND PIN SET LOT-

SPL 30-933-6 AND PIN SET IN CASES AS PHOTOGRAPHED. TOOL BOX 2 5 drawer left side


15
MAGIC CUTTING FLUID LOT-
MAGIC CUTTING FLUID LOCATED IN DRAWER AS PHOTOGRAPHED

16
MACHINERY/ TOOLING LOT-VARIOUS

17
STARRETT 9 INCH HEIGHT GAGE

Includes 14 inch height gage-


18
GAGE BLOCKS, VICES, PINS LOT-
HOKE PRATT AND WHITNEY PRECISION GAGE BLOCKS IN WOOD BOX, PYH TOOLMAKER VISE, VERMONT PINS IN CASE (NEXT DRAWER DOWN) - (3) ITEMS TOTAL

19
LARGE LOT OF INTERSTATE AND OTHER REAMERS-
THIRD SMALL DRAWER ON RIGHT

20
LOT OF VARIOUS STEEL STAMPS, LETTERS AND NUMBERS-
LOT OF VARIOUS STEEL STAMPS, LETTERS AND NUMBERS, FOURTH DRAWER DOWN ON RIGHT SIDE

21
MACHINE TOOLING LOT-
FIFTH DRAWER DOWN ON RIGHT AS PHOTOGRAPHED

22
QUICK CHANGE TOOL HOLDER-

23
BEAUTIFUL WOOD MACHINIST CASE-
H. GERSTNER AND SONS MACHINIST CASE

24
COLLETS WITH RELIANCE 5c COLLETT STAND LOT-
COLLECTION WITH RELIANCE 5c COLLETT STAND AS PHOTOGRAPHED

25
BROWN AND SHARP BLOCK DIGITAL CALIPER GAGES AND INSPECTION TOOLS-
FIRST DRAWER OF GENERAL CABINET FACING GARAGE DOOR 

26
PRECISION DRILL BITS
IN GREEN CASE-LOT OF (8)

27
UNION BUTTERFIELD DRILL BITS LOT
IN BLUE CASE-QUANTITY (17) 

28
LOT OF BITS AND END MILLS SANDING SUPPLIES-
FIRST HALF OF DRAWER ON LEFT OF GENERAL TOOL BOX

29
STARRETT MICROMETER SET-
IN SECOND HALF OF DRAWER ON LEFT

30
STARRETT PARALLELS, T-HANDLES, INSPECTION TOOLS LOT-
THIRD DRAWER ON LEFT

31
LOT OF TOOLING-
TOOLING IN FIRST TWO HALF DRAWERS ON RIGHT

32
AIR COMPRESSOR-
PORTER CABLE 150 PSI AIR COMPRESSOR, 6 GALLON

36
DELTA VERTICAL BANDSAW-

S/N: HI-00285 CAT#: 2640. 12 inch throat


37
GRANT ULTRASONIC CLEANER / WATER BATH-
MODEL: W28

38
RC5C COMM/IND CENTRIFUGE - SORVELL INSTRUMENTS-
RC5C COMM/IND CENTRIFUGE - SORVELL INSTRUMENTS

39
GRIZZLY 2" BELT SANDER/ 6" GRINDER-
GRIZZLY 2" BELT SANDER/ 6" GRINDER - NEW IN BOX

40
NIKON PROFILE PROJECTOR-

Needs reassembled


41
MACHINE VICE 6 INCH WITH JAWS-

42
BROWN & SHARPE 9 INCH RISER BLOCK IN CASE-

43
RALMIKES COMPOUND MAGNETIC SINE PLATE

Includes ll angle block clamp vice-


44
US DEPT. OF DEFENSE SKW GENERATOR-
MODEL #: MEP 002A, S/N: K2 15008, DOM: 1981, SINGLE PHASE, MANUFACTURED BY: JR HOLLINGSWORTH, WITH EXTERNAL 50 GAL. FUEL TANK - NOT CONNECTED

45
INSPECTION EQUIPMENT LOT-

V blocks, setup blocks, right angle block


46
KRANZLE 1120T PORTABLE PRESSURE WASHER-
KRANZLE 1120T PORTABLE PRESSURE WASHER

47
BROWN & SHARPE SETUP BLOCKS IN CASE-

48
STARRETT INSIDE MICROMETER, DEPTH GAGES-

49
HORIZONTAL 4 FT. BANDSAW
ON ROLLING CART-

50
ATLAS 7B METAL SHAPER-
ATLAS 7B METAL SHAPER

51
CLAUSING 16ST FLOOR PEDESTAL DRILL PRESS-

S/N: 111426. 8 inch throat


52
SO CKD1 UPRIGHT GRINDING MACHINE-
S/N: 89-24243 WITH GREEN CABINET AND TOOLING IN CABINET 

53
INSPECTION EQUIPMENT LOT-

Digital mic, pin gages, tap extractors


54
SOUTHBEND CL 187ZB LATHE

ON CABINET, CL187ZB- includes 6 inch 4 jaw chuck, 6 & 4 inch 3 jaw chuck, 6 & 7 inch face plate, live center, tail stock, steady rest, colletts.


55
LOT PRECISION DRILL BITS-
LOT PRECISION DRILL BITS AS PHOTOGRAPHED

56
BALDOR DOUBLE HEAD BUFFER
ON 4 FT. PEDESTAL-

57
INSPECTION EQUIPMENT LOT-

Hole gage, sine block, hole gages


58
HARIG SUPER 612 SURFACE GRINDER

Includes Ceramsx 6x12 inch magnetic chuck. WITH GRINDING WHEELS IN SHELF-


59
RED UPRIGHT JACK, BLUE J BAR LOT-
RED UPRIGHT JACK AND BLUE J BAR

60
TROYKE 12x12 INCH ROTARY TABLE-

T Slotted table


61
LOT OF JUSTRITE SAFETY CANS-
3 GAL. SAFETY CANS - METAL

62
MHC STEEL PLUG GAGE SET IN CASE-
MHC STEEL PLUG GAGE SET - MISSING 1

63
MHC STEEL PLUG GAGE SET IN CASE-
MHC STEEL PLUG GAGE SET .626-.750

64
MHC STEEL PLUG GAGE SET IN CASE-
MHC STEEL PLUG GAGE SET .751-.832

65
(2) -58 PIECE STEEL CLAMPING KITS-
58 PIECE STEEL CLAMPING KIT

66
BROWNE AND SHARPE 583 HITE SET-

BROWNE AND SHARPE 583 HITE SET IN CASE. INCLUDES 9” RISER BLOCK


67
MTI 5" SINE VISE IN CASE-
MTI 5" SINE VISE

68
BELT & DISK SANDER ONLY-

69
HARIG GRIND ALL 1 RADIUS DRESSER IN CASE-
HARIG GRIND ALL 1 RADIUS DRESSER

70
HTP ARTIC CHILL WATER COOLER 70221-
NEW IN BOX, WITH COOLANT

71
SYBRON THERMOLYNE 1400 FURNACE-
SYBRON THERMOLYNE 1400 FURNACE

72
PHASE II 12 INCH T SLOTTED ROTARY TABLE-

PHASE II 12 INCH SLOTTED CIRCULAR MILLING ROTARY TABLE


73
LOT OF ASSORTED AUTO SUPPLIES
on (2) shelves- wiper fluid, truck top bag, antifreeze, oil

74
INDEXING / DIVIDING HEAD-
RUSTED

75
SEARS BATTERY CHARGER-
SEARS BATTERY CHARGER

76
RED 6" HD DOUBLE HEAD VISE WITH ROTATING HEAD-
RED 6" HD VISE WITH TURNING HEAD

77
6" HEAVY DUTY SWIVEL VISE-
6" HEAVY DUTY VISE

78
MILLER TAG-A-LONG CADYMATE
AS PHOTOGRAPHED-

81
ASSORTMENT OF CONTROLS as photographed-

82
SHOP CRANE 2 TON-

83
NO. 2 ARBOR PRESS-

84
TOOL HOLDERS LOT-
Boring head, face mill, tool holder

85
DURACRAFT BENCH MOUNTED DOUBLE END GRINDER-

86
LOT OF (3) RADIUS GAGE SETS-

87
CARBIDE BITS & INDEXABLE TURNING TOOL HOLDERS LOT-

88
MICHELIN 3 1/2 TON AUTOMOTIVE FLOOR JACK-

89
STEEL STOCK LOT-

90
MACHINE SUPPLIES LOT-

Gallery Images Loading, Please Wait...
  • Home
  • Advertise Your Estate Sale for $39
  • Hire an Estate Sale Company
  • Add Your Estate Sale Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Larkspur Estate - Part 1
 Online Only Auction
 
Sale Date(s)
Bidding Starts: Tuesday May 21 , 12:00 AM
Bidding Ends: Tuesday May 21 , 02:00 PM
Sale Location

Larkspur, CO 80118
Company
Dickensheet and Associates Inc.

Contact: Christine Dickensheet
Phone: 303-934-8322
Email: sales@dickensheet.com
Website: www.Dickensheet.com

Listing Terms and Conditions
TERMS AND CONDITIONS FOR THIS AUCTION
General Terms and Conditions

All items are offered for sale "AS-IS, WHERE-IS". Dickensheet & Associates, Inc. makes no warranty, guarantee or representation of any kind, expressed or implied, as to the merchantability or fitness for any purpose of the property offered for sale. The Buyer is not entitled to any payment for loss of profit or any other money damages-special, direct, indirect or consequential. Any and all disputes or concerns MUST be addressed prior to the removal of the lot(s) prior to the auction site.
All parties must be over the age of 18 to participate with the auction or be present in the impound yard before, during or after removal.
Bidder is required to provide true, accurate, current and complete information and maintain, promptly update the registration data to keep it true, accurate, current and complete. Please note that the registration address will need to match the address associated with the card utilized during the process to create an account.
Buyer is responsible for all transactions on its account, including without limitation, all bids placed by authorized bidders and bid submitted through the Auctioneer’s bidding platform. Accounts cannot be transferred. In the event of unauthorized use of Buyer’s login information, Buyer is responsible for all bids.
The Auctioneer is acting as agent only and is not responsible for actions of its Principals. The Auctioneer shall assume no liability for representations made, or information provided by the Seller.
By registration, the registered party is authorizing Auctioneer communication via email, landline, or cell/mobile phone including text messaging and/or any other forms of communication or technology now known or created in the future, for any purpose, including general business matters, account information, marketing materials, collections, and/or any other communication needs.
Auctioneer has made every reasonable effort to facilitate online bidding. However, it is possible that technical difficulties and internet issues may arise that affect Auction Company’s website, bidding platform, computer, server or the Bidder’s computer, personal device or software which is beyond the control of Auction Company. By registering, Bidder acknowledges that the Auctioneer is not responsible for any technical difficulties or internet issues associated with a bid and that, in the event technical difficulties interfere with or prevent a bid, it may be necessary to withdraw items from bidding due to technical errors or uncontrollable circumstances. Further, in the event of the occurrence of a technical difficulty during an Auction, Auction Company, in its sole discretion, reserve the right to: (1) declare a Property sold, (2) postpone or cancel the Auction, (3) extend the bidding time for the Auction (which may reopen bidding on closed items, if any) and/or (4) re-list the Property for auction at another date and time. The decision on this matter shall be final. Bidder acknowledges that, by registering for ay auction held by Auction Company, Bidder accepts the terms and conditions of this disclaimer.
This staggered bidding online auction is subject to soft close. If a bid is received shortly before the lot closes, the system will automatically extend the bidding time to allow other bidders an opportunity to competitively bid prior to the auction closing. The method eliminates “snipers” and encourages fair and impartial bidding from all participants.
By law, all auctions are with reserve unless specifically stated to be Absolute per UCC 2-328 and applicable state law.
All parties enter the lot at their own risk. Neither Dickensheet & Associates, inc. nor the Seller(s), Landlord is responsible for personal injury or lost items regarding this auction including inspection (if applicable) and removal.
Persons removing the goods assume all risks of damage or loss to person and property and specifically release Dickensheet & Associates, Inc., Seller(s), Landlord from liability. Therefore, neither Dickensheet & Associates, Inc, Seller(s), Landlord, nor its principal(s), shall be liable by reason of any defect in, or condition of premises on which auction is held.
Default shall include: (1) failure to observe these terms & conditions; (2) failure to make good and timely payment; or (3) failure to remove all items within the specified time. Default will result in the suspension from participation in all future sales. If the Buyer fails in the performance of their obligations, Dickensheet & Associates, Inc. may exercise such rights and may pursue such remedies as are provided by law.
By submitting a bid, the bidder agrees that they have read, fully understand and accept these Terms & Conditions of Online Sales, and agree to pay for and remove the property, if the bid is accepted, by the dates and times specified.
PAYMENT TERMS AND CONDITIONS
PLEASE REVIEW THE DETAILS SECTION FOR THE TYPE OF PAYMENT BEING ACCEPTED AT THIS PARTICULAR AUCTION.
THE FOLLOWING REPRESENTS THE VARIETY OF ACCEPTABLE PAYMENTS FOR THE VARIETY OF AUCTIONS CONDUCTED BY AUCTIONEER:
WIRE TRANSFERS-All wire transfers would need to be completed by successful bidders to assure the payment is noted in Auctioneer’s account prior to removal stated time period.
CARD PAYMENTS-Visa, Mastercard and Discover will be accepted as a form of payment for this particular auction for purchasers under $1,000.00 with a convenience fee as outlined in the Terms & Conditions during the registration process. Please note that by utilizing a card that the paperwork would need to be issued as registered into the system (for name etc). When reviewing statements on the account, Dickensheet & Associates, Inc. will be processing payment on the items purchased for the auction. On certain auctions, no automatic payments are processed. To use a credit card, buyer must contact Auctioneer to authorize charge.
CASH-VECTRA BANK-Cash transactions can be accepted at Vectra Bank locations throughout Colorado following the auction. Please call 303-934-8322 for further information on completion.
Please utilize the information below for the Vectra Bank location nearest to you.
Vectra Bank Colorado Branch and ATM Locations
CASH-WESLEY LOCATION-Cash transactions can also be accepted at Dickensheet & Associates, Inc., 1501 W Wesley Avenue, Denver, CO 80223.
CASH-On selected auctions, cash payments may be accepted on site. Please bring exact change. Thank you.
PREAPPROVED BUSINESS/PERSONAL CHECKS-Please call 303-934-8322 prior to participating with the auction for funds verification process.

These terms and conditions provide clarity and ensure that all participants are well-informed about the auction process and their responsibilities.

LARKSPUR-PART I-Metal Machinery, Machinery & Inspection Tools, Other Tools and More

On Behalf Of An Estate
Date: Tuesday, May 21st - 2:00 PM
INSPECTION: Tuesday, May 21st 10AM-12PM
PAYMENT DEADLINE: Card, Cashiers Check, Wire Transfer (if received no later than deadline), Cash at either Vectra Bank or Dickensheet & Associates, Inc, 1501 W Wesley Avenue, Denver, CO 80223
REMOVAL ONLY: Thursday, May 23rd 9AM-5PM MT
Location: Larkspur, CO 80118
Click here to see a map of the location

Please note that there are residence to the location.
PLEASE DO NOT UTILIZE FRONT DOOR-GARAGE ENTRANCE ONLY. THANK YOU!

Payment:
CASH, DEBIT/CREDIT CARD UTILIZED DURING REGISTRATION , WIRE TRANSFER ,  CERTIFIED/ PREAPPROVED CHECK . 
Credit or Debit Cards are subject to an additional 4% convenience fee.

ANY PAYMENTS NOT RECEIVED TWO HOURS PRIOR TO THE END OF THE REMOVAL TIME PERIOD-The card utilized for registration will be charged.

If the card is approved-a paid invoice will be sent to the email utilized for registration. If the purchased lots are not removed during the stated time period, the purchaser agrees that they have abandoned the items and the transaction is not applicable for a dispute to be presented to the card provider.

If the card is declined, Auctioneer shall have the discretion to resell the lots and revoke bidding privileges to registered party.

13 % buyer's premium on all purchases.
Sales Tax: 4%

All lots are offered for sale "AS-IS, WHERE-IS". Purchaser is responsible for full payment and removal (including with proper tools, assistance, boxes etc) within the time period outlined above.

Dickensheet & Associates, Inc.
1501 West Wesley Avenue
Denver, CO 80223
Telephone: (303) 934-8322
Toll Free: (877) 284-0338
Fax: (303) 934-8252
E-mail: customerservice@dickensheet.com

0A
LARKSPUR, CO-INSPECTION/PAYMENT/REMOVAL-
Please note that there are residence to the location. PLEASE DO NOT UTILIZE FRONT DOOR-GARAGE ENTRANCE ONLY. THANK YOU!
INSPECTION: Tuesday, May 21st 10AM-12PM
PAYMENT DEADLINE: Card, Cashiers Check, Wire Transfer (if received no later than deadline), Cash at either Vectra Bank or Dickensheet & Associates, Inc, 1501 W Wesley Avenue, Denver, CO 80223
REMOVAL ONLY: Thursday, May 23rd 9AM-5PM MT

0B
SKID STEER LOADER LOCATED AT THE RESIDENCE-
Skid steer loader is located at the residence to assist with larger machinery for loading on a first come, first serve basis with signature on a loading release. Please call 303-934-8322 to receive a copy of the release or to make an inquiry on COI needed for successful purchaser for supplying their own equipment on site utilized for loading.

1
FRAY TYPE 10-R MILLING MACHINE-

SN: 1530, TYPE 4 - 36 x 9 inch T slotted table. Extra power head. PLEASE NOTE THAT THE MILLING MACHINE WAS NOT CONNECTED AT THE RESIDENCE. 


2
KURT 0675-107528 VISE-

6 inch steel jaws, AS PHOTOGRAPHED


3
STARRETT SURFACE PLATE

WITH COVER-APPROX. 24"X30"X6”. PLATE: 724134, SURFACE PLATE CLEANERS


4
MICROMETERS LOT IN CASES INCLUDING-
MITUTOYO APB-4B MICROMETER, 0-1" MICROMETER, AND TWO ADDITIONAL IN LOT

5
STARRETT NO. 98 MACHINIST LEVEL
IN CASE-

6
STARRETT, MITUTOYO INSPECTION TOOLS
IN CASES AS PHOTOGRAPHED-

7
GAGE SETS LOT-
STARRETT RADIUS GAGE SET, MITUTOYO RADIUS GAGE SET, FOWLER RADIUS GAGE SET

8
SURFACE PLATE SQUARE, WRENCHES, CENTER PUNCHES-
BROWN AND SHARP TOOLMAKER SURFACE PLATE SQUARE, (2) T-HANDLE TAP WRENCHES, (2) CENTER PUNCH - (6) ITEMS TOTAL

9
DRILL BITS LOT INCLUDING
(2) ACCUPRO 78088572 DRILL BITS, AND (2) ITA DRILL BITS-(4) ITEMS TOTAL

10
SHARS NMTB 30X1-70 TOOL HOLDER IN
CLEAR CONTAINER, AND (1) CRITERION DBL-202 BORING HEAD-(2) ITEMS TOTAL

11
JACOBS AND BALL SUPER CHUCK-
0-1/2", NO. 11N 0-3/8", NO. 3 0-17/32", 6B 0-1/2", 6A 2A TAPE 0-1/2"-(6) ITEMS TOTAL

12
MACHINERY AND TOOLING LOT-

SOME APPEAR NEW - COLLETS LOT IN 2ND DRAWER TO LEFT TOOL BOX 1 2nd DRAWER LEFT SIDE.


13
LOT OF MACHINE TOOLING BITS, CUTTERS, LATHE STOPS-

LOT OF MACHINE TOOLING BITS, TOOL HOLDERS AND MORE -TOOL BOX 1 3RD DRAWER DOWN ON LEFT


14
SPL 30-933-6 AND PIN SET LOT-

SPL 30-933-6 AND PIN SET IN CASES AS PHOTOGRAPHED. TOOL BOX 2 5 drawer left side


15
MAGIC CUTTING FLUID LOT-
MAGIC CUTTING FLUID LOCATED IN DRAWER AS PHOTOGRAPHED

16
MACHINERY/ TOOLING LOT-VARIOUS

17
STARRETT 9 INCH HEIGHT GAGE

Includes 14 inch height gage-


18
GAGE BLOCKS, VICES, PINS LOT-
HOKE PRATT AND WHITNEY PRECISION GAGE BLOCKS IN WOOD BOX, PYH TOOLMAKER VISE, VERMONT PINS IN CASE (NEXT DRAWER DOWN) - (3) ITEMS TOTAL

19
LARGE LOT OF INTERSTATE AND OTHER REAMERS-
THIRD SMALL DRAWER ON RIGHT

20
LOT OF VARIOUS STEEL STAMPS, LETTERS AND NUMBERS-
LOT OF VARIOUS STEEL STAMPS, LETTERS AND NUMBERS, FOURTH DRAWER DOWN ON RIGHT SIDE

21
MACHINE TOOLING LOT-
FIFTH DRAWER DOWN ON RIGHT AS PHOTOGRAPHED

22
QUICK CHANGE TOOL HOLDER-

23
BEAUTIFUL WOOD MACHINIST CASE-
H. GERSTNER AND SONS MACHINIST CASE

24
COLLETS WITH RELIANCE 5c COLLETT STAND LOT-
COLLECTION WITH RELIANCE 5c COLLETT STAND AS PHOTOGRAPHED

25
BROWN AND SHARP BLOCK DIGITAL CALIPER GAGES AND INSPECTION TOOLS-
FIRST DRAWER OF GENERAL CABINET FACING GARAGE DOOR 

26
PRECISION DRILL BITS
IN GREEN CASE-LOT OF (8)

27
UNION BUTTERFIELD DRILL BITS LOT
IN BLUE CASE-QUANTITY (17) 

28
LOT OF BITS AND END MILLS SANDING SUPPLIES-
FIRST HALF OF DRAWER ON LEFT OF GENERAL TOOL BOX

29
STARRETT MICROMETER SET-
IN SECOND HALF OF DRAWER ON LEFT

30
STARRETT PARALLELS, T-HANDLES, INSPECTION TOOLS LOT-
THIRD DRAWER ON LEFT

31
LOT OF TOOLING-
TOOLING IN FIRST TWO HALF DRAWERS ON RIGHT

32
AIR COMPRESSOR-
PORTER CABLE 150 PSI AIR COMPRESSOR, 6 GALLON

36
DELTA VERTICAL BANDSAW-

S/N: HI-00285 CAT#: 2640. 12 inch throat


37
GRANT ULTRASONIC CLEANER / WATER BATH-
MODEL: W28

38
RC5C COMM/IND CENTRIFUGE - SORVELL INSTRUMENTS-
RC5C COMM/IND CENTRIFUGE - SORVELL INSTRUMENTS

39
GRIZZLY 2" BELT SANDER/ 6" GRINDER-
GRIZZLY 2" BELT SANDER/ 6" GRINDER - NEW IN BOX

40
NIKON PROFILE PROJECTOR-

Needs reassembled


41
MACHINE VICE 6 INCH WITH JAWS-

42
BROWN & SHARPE 9 INCH RISER BLOCK IN CASE-

43
RALMIKES COMPOUND MAGNETIC SINE PLATE

Includes ll angle block clamp vice-


44
US DEPT. OF DEFENSE SKW GENERATOR-
MODEL #: MEP 002A, S/N: K2 15008, DOM: 1981, SINGLE PHASE, MANUFACTURED BY: JR HOLLINGSWORTH, WITH EXTERNAL 50 GAL. FUEL TANK - NOT CONNECTED

45
INSPECTION EQUIPMENT LOT-

V blocks, setup blocks, right angle block


46
KRANZLE 1120T PORTABLE PRESSURE WASHER-
KRANZLE 1120T PORTABLE PRESSURE WASHER

47
BROWN & SHARPE SETUP BLOCKS IN CASE-

48
STARRETT INSIDE MICROMETER, DEPTH GAGES-

49
HORIZONTAL 4 FT. BANDSAW
ON ROLLING CART-

50
ATLAS 7B METAL SHAPER-
ATLAS 7B METAL SHAPER

51
CLAUSING 16ST FLOOR PEDESTAL DRILL PRESS-

S/N: 111426. 8 inch throat


52
SO CKD1 UPRIGHT GRINDING MACHINE-
S/N: 89-24243 WITH GREEN CABINET AND TOOLING IN CABINET 

53
INSPECTION EQUIPMENT LOT-

Digital mic, pin gages, tap extractors


54
SOUTHBEND CL 187ZB LATHE

ON CABINET, CL187ZB- includes 6 inch 4 jaw chuck, 6 & 4 inch 3 jaw chuck, 6 & 7 inch face plate, live center, tail stock, steady rest, colletts.


55
LOT PRECISION DRILL BITS-
LOT PRECISION DRILL BITS AS PHOTOGRAPHED

56
BALDOR DOUBLE HEAD BUFFER
ON 4 FT. PEDESTAL-

57
INSPECTION EQUIPMENT LOT-

Hole gage, sine block, hole gages


58
HARIG SUPER 612 SURFACE GRINDER

Includes Ceramsx 6x12 inch magnetic chuck. WITH GRINDING WHEELS IN SHELF-


59
RED UPRIGHT JACK, BLUE J BAR LOT-
RED UPRIGHT JACK AND BLUE J BAR

60
TROYKE 12x12 INCH ROTARY TABLE-

T Slotted table


61
LOT OF JUSTRITE SAFETY CANS-
3 GAL. SAFETY CANS - METAL

62
MHC STEEL PLUG GAGE SET IN CASE-
MHC STEEL PLUG GAGE SET - MISSING 1

63
MHC STEEL PLUG GAGE SET IN CASE-
MHC STEEL PLUG GAGE SET .626-.750

64
MHC STEEL PLUG GAGE SET IN CASE-
MHC STEEL PLUG GAGE SET .751-.832

65
(2) -58 PIECE STEEL CLAMPING KITS-
58 PIECE STEEL CLAMPING KIT

66
BROWNE AND SHARPE 583 HITE SET-

BROWNE AND SHARPE 583 HITE SET IN CASE. INCLUDES 9” RISER BLOCK


67
MTI 5" SINE VISE IN CASE-
MTI 5" SINE VISE

68
BELT & DISK SANDER ONLY-

69
HARIG GRIND ALL 1 RADIUS DRESSER IN CASE-
HARIG GRIND ALL 1 RADIUS DRESSER

70
HTP ARTIC CHILL WATER COOLER 70221-
NEW IN BOX, WITH COOLANT

71
SYBRON THERMOLYNE 1400 FURNACE-
SYBRON THERMOLYNE 1400 FURNACE

72
PHASE II 12 INCH T SLOTTED ROTARY TABLE-

PHASE II 12 INCH SLOTTED CIRCULAR MILLING ROTARY TABLE


73
LOT OF ASSORTED AUTO SUPPLIES
on (2) shelves- wiper fluid, truck top bag, antifreeze, oil

74
INDEXING / DIVIDING HEAD-
RUSTED

75
SEARS BATTERY CHARGER-
SEARS BATTERY CHARGER

76
RED 6" HD DOUBLE HEAD VISE WITH ROTATING HEAD-
RED 6" HD VISE WITH TURNING HEAD

77
6" HEAVY DUTY SWIVEL VISE-
6" HEAVY DUTY VISE

78
MILLER TAG-A-LONG CADYMATE
AS PHOTOGRAPHED-

81
ASSORTMENT OF CONTROLS as photographed-

82
SHOP CRANE 2 TON-

83
NO. 2 ARBOR PRESS-

84
TOOL HOLDERS LOT-
Boring head, face mill, tool holder

85
DURACRAFT BENCH MOUNTED DOUBLE END GRINDER-

86
LOT OF (3) RADIUS GAGE SETS-

87
CARBIDE BITS & INDEXABLE TURNING TOOL HOLDERS LOT-

88
MICHELIN 3 1/2 TON AUTOMOTIVE FLOOR JACK-

89
STEEL STOCK LOT-

90
MACHINE SUPPLIES LOT-