FRAZIER WELDING & STEEL CO.
Listing ID#: 684257

Sale Location

Knoxville, TN 37917
Sale Dates and TimesSALE IS COMPLETED
Bidding Starts: Monday Apr 15
Bidding Ends: Monday May 6
Sale Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
Powell Auction & Realty, LLC

Contact: Kenny Phillips
Phone: 865-938-3403
Website: www.powellauction.com

EstateSale.com ID#: 5003
View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
### IF YOU FAIL TO READ THE TERMS OF THE SALE YOUR STILL RESPONSIBLE TO THE FOLLOWING TERMS###

Everything will be sold As-Is Where-Is; without guarantee or warranty expressed or implied. Items become the sole responsibility of purchaser. All sales are final!

BIDDER CONTRACT: In order to bid at this auction you must meet registration requirements. By registering and obtaining a bidders number you are demonstrating that you fully understand, accept and agree to all conditions and terms set forth for this auction, whether in writing or implied verbally.

BUYER RESPONSIBILITY: From the moment auctioneer deems items sold, it becomes the sole responsibility of buyer. Reasonable care will be made by auction company to safeguard purchases, but in the event of theft, vandalism, accidental, or purposeful damage, negligence and/or and Act of God, Buyer agrees to hold auction company harmless.

WARRANTY: All information contained herein is true and correct to the best of auction company's knowledge, but it is in no way guaranteed as to the accuracy of description made. Every items sold 'as is where is' without warranty as to usefulness or merchantability. Bidder/Buyer has opportunity during inspection days prior to auction to inspect or have inspected by third party all items contained in this auction.

POWELL AUCTION & REALTY LLC. and its Employees act merely as agents for sellers. All auctions are with reserve unless specifically stated otherwise. Reserves, if any, ARE NOT disclosed unless advertised as 'ABSOLUTE.' Auctioneers at their discretion may place a reserve bid on behalf of the seller. All final bids are subject to the seller's confirmation. Only the top bidder will be contacted as to the status of his/her bid. While the information we provide on item(s) is deemed correct, no warranties are expressed or implied as to any items being sold and you agree to purchase and accept the item in an as-is condition. Information on items is obtained by us from the sellers and you hereby agree to hold harmless POWELL AUCTION, LLC and their Employees for any errors or omissions regarding the item(s) being sold. This information includes but is not limited to year, model, machine or engine hours, physical condition, options, features and other data pertinent to the value of the item. ALL ITEMS ARE SOLD AS-IS WHERE-IS unless specific factory or seller issued warranties are listed in the item description.

You acknowledge that you have the right and responsibility to inspect the item(s) personally, or to have a third party representative inspect the item(s) for you. That by bidding on an item you have agreed to accept that item in its present condition at its present location and with the description provided whether accurate or not.

Timed Online only Auction Close. Timed online auctions will begin to close on the date and time listed. Lots will remain open until no bids have been placed within the last 2 minutes. Timed online auctions normally close at a rate of one lot per minute. POWELL AUCTION,LLC reserves the right to close multiple lots per minute at their discretion. Upon your accepted bid of an item, that item shall immediately become your responsibility and be at your risk (whether you have paid for that item or not). You agree that POWELL AUCTION,LLC . its employees, and their sellers are not responsible for lost, stolen or damaged items and will not reimburse or discount items for any type of loss. Buyers are responsible for any costs incurred to prepare their item(s) for transport and/or shipping. This includes but is not necessarily limited to the cost of any rigging, disassembly, special loading requirements, transport, packaging, insurance and all other costs related to physical transfer of their item(s). You agree to remit payment and remove from the auction property any purchases within the stated time for the auction being conducted. You further understand and agree that failure to remove items in the stated time for the auction will subject you to moving and storage fees unless arrangements have been made with the seller.

When using our online auction services you are making firm commitments to purchase said item(s) and are entering into a legal and binding contract. Bids may not be cancelled or retracted for any reason. Non paying bidders or fraudulent bidding will subject you to legal recourse and possible criminal charges including any fraud and/or interstate commerce violations. You also acknowledge that the Internet may be an unreliable and error prone network. POWELL AUCTION,LLC will not guarantee that bids placed online will always be transmitted to or received by the auctioneer in a timely fashion. You agree to hold POWELL AUCTION,LLC and their employees harmless for any interruptions in online bidding. Further, the auctioneer has the sole discretion to accept or refuse any bid. POWELL AUCTION,LLC retain the right, at our sole discretion, to add, delete or change some or all of our online services and the terms and conditions governing their online auctions at any time without notice.

ABANDONMENT POLICY

POWELL AUCTION, LLC provides this Abandonment Policy to inform you of our policies and procedures regarding any purchased item(s)/property that has not been removed by a buyer in a timely manner. Upon winning the bid for an item(s), after paying for item(s) purchased, a buyer is obligated to remove the item(s) from the auction site within a timely manner.

POWELL AUCTION,LLC may deem a buyer's failure to claim and remove equipment within 10 days following the close of an auction as evidence of buyer's intention to abandon the property. In these instances, POWELL AUCTION,LLC may take action that is adverse to buyer's interest in the property, including, but not limited to steps to dispose of the property. Disposition of property may include a variety of approaches based upon the buyer's purchase price of the property as follows:

1) For those items with a final selling price of $5,000 or less, POWELL AUCTION,LLC will determine the appropriate disposition approach which may include:

a. Removing and disposing as the company sees fit.

b. Allowing seller to retain or scrap.

c. Sell the item(s), whereby POWELL AUCTON,LLC will remit the sales proceeds to POWELL AUCTION,LLC , for selling and advertising expenses, storage costs, plus administrative fee.

2) For those items with a final selling price of greater than $5,000, POWELL AUCTION,LLC may remove the item from the selling location and resolve as follows:

a. POWELL AUCTION,LLC may charge the buyer's storage fees of $25 per day, with the total amount not to exceed $1,500.

b. Sell the item(s), whereby POWELL AUCTION,LLC will remit the sales proceeds to POWELL AUCTION, for selling and advertising expenses, storage costs, administrative fee.

All information contained in descriptions in catalog and Internet are made with auction company's knowledge and information, but are not guaranteed. Bidder/Buyer assumes all responsibility to determine the correct information, including but not limited to kind, age, year, model condition, make, serial number, etc.

No sale shall be invalidated by inaccuracies, defects,
damaged goods, or incorrect descriptions.

When purchasing EQUIPMENT, it is highly recommended that you have a inspected any and all moving parts, nuts, bolts, oil, gas, ect. Powell Auction nor its staff have inspected equipment prior to the auction. All items are sold as is, where is. �Failure to preview items to be sold does not constitute grounds for refunds. The bidder agrees under no circumstances to stop payment on checks or credit cards.

BY SIGNING INTO THIS AUCTION YOU AGREE TO ALL TERMS & CONDITIONS OF THIS AUCTION.
Listing Information
Auction ends May 6th 2024 pick up may 8th and 9th 9am to 4pm both days This auction was a family ran fab and metal shop started back in the 1960's. you will find: tools welding equipment plasma torches welding rods and wire also large items like: presses form roller drill press stop break and so much more. 15% IF PAY BY CASH OR APPROVED CHECK ON MONDAY, APRIL 29 FROM 9AM - 2PM EDT. NO SHIPPING, LOCAL PICKUP ONLY!!! BE SURE AND BRING HELP TO LOAD YOUR ITEMS ON PICKUP DAY. WE WILL HAVE A FORK LIFT ON SITE TO ASSIST WITH LOADING. BUYER WILL BE RESPONSIBLE FOR SECURING YOUR LOAD BEFORE LEAVING. SOME MACHINERY WILL NEED TO BE DISCONNECTED FROM THE POWER, BUYER WILL BE RESPONSIBLE FOR DOING THIS AND ENSUREING THE WIRES ARE CAPPED AFTER REMOVAL. ALL SALES ARE FINAL.

1
PLEASE READ INPORTANT INFO!!
Some items are bolted to floor or wall. Please bring your own tolls. things like socket sets (MM or SAE) cordless grinder and or sawzall Staff will not have tools to remove. Forklift and over crane can be used (by employees only) to load some items L...

2
TERMS OF THE AUCTION: 18% BUYERS PREMIUM -
15% IF PAY BY CASH OR APPROVED CHECK ON Tuesday may 7th FROM 9AM - 2PM EDT. NO SHIPPING, LOCAL PICKUP ONLY!!! BE SURE AND BRING HELP TO LOAD YOUR ITEMS ON PICKUP DAY. WE WILL HAVE A FORK LIFT ON SITE TO ASSIST WITH LOADING. BUYER WILL BE RESPONSIBLE...

3
Dates
Auction ends May 6th 2024 pick up May 8th and 9th from 9am to 4pm both days please bring loading help trailers for the large items we will set a appointment to have flat bed pick up. please contact office to set up appt. Preview will be Monday may 6...






9
Miller Syncrowave 350 Constant current AC/DC arc
welding power source has ground line distilled water tank. See pictures.

10
Contents of metal rack includes cut off wheels
wire flare, tool, metal brushes, foot pedal, etc. see pictures

11
Full room lot includes welding, hose galvanized,
pipe, fittings, extension, cords, nuts, bolts, vintage pulleys salt, blades, buffing, wheels see pictures

12
Regulators foot pedal
Contents of shelf


14
Rolling cart made from steal
items on cart not included

15
Welding rods, spools of wire feed weld
see pictures many sizes and thickness of rods and wire.



18
Drive onto car hoist unknown weight capacity
buyer must disassemble on pick up day

19
Miller welder model SR 300 serial number 25364 V
230/460 A 58/29 no leads with unit



22
Large scrap metal lot round tubing angle, iron
diamond plate, sheet metal, miscellaneous, aluminum, and steel pieces


24
Miscellaneous sheet metal lot on cart cart is
available in lot if Buyer wants it

25

26
Multiple size of welding rods inside of chemo
storage container storage container comes with a lot



29
And crank sheet metal rolling form on Stan bolted
to ground please bring tools to remove


31



34
Lot full of ground stick feed welders wire feed
welder see pictures Just the lines only

35
Table with contents 1 gallon pressure sprayer
angle, iron wheelbarrow, or dolly wheels table included



38
Shelf lot includes time clock breakers,
submersible pump, miscellaneous parts two working welders see pictures

39
Linde VI-400 Cv/dc power supply Output
210/450 60 HZ 3 pH 56/28 AMps

40
Metal lathe Carol, Jamison machine tool company,
Ohio Speed 14 RPM up to 510 RPM Has case with extra parts see pictures



43
Round tubing to believe to be chrome Molly or
molly tubing also aluminum and steel pipe wall rack stays with building see pictures

44
Large lot square tubing, round tubing, stainless,
see notch, angle, iron, and round Buyer can take the rack. It all sits on see pictures.




48
Chain winch, unknown, weight attached to trolley,
trolley and rail. Do not come with lot. See pictures.

49
Diamond plate toolbox Buyer must bring bolt cutter
to remove from beam on wheels multiple compartments all lockable with padlock no padlock included. See pictures.

50
Web sheet metal roller electric powered A must
see Buyer must schedule appointment for pick up On site crane must be used. See pictures.

51
12 post rolling system for sheet metal unknown
maker Buyer, may need to schedule appointment for pick up Over head crane can be used.

52
HTC sheer model U3 7�10 serial number
U12761043 Capacity three eight mid steel 500 N/FT rake Hydraulic powered Buyer, my schedule appointment for pick up On site crane will be used to load

53
Thick and thin sheet metal with rack please
schedule appointment for pick up. On site crane must be used.


53
Air hose real
Bolted to wall, please bring tools


54
HTC hydraulic brake press 220 V/ 460v 55/27.5
amp Hydraulic motor power 50/25 amp Appointment needs to be scheduled for pick up. The on-site crane will be available to lift.

55
Steel miter saw with rolling tables bolted to the
floor please bring tools to remove from floor and schedule appointment for the on-site crane to load



56
Buffalo dip press has owners manual Model number
F � 4788 � B has dies inside case next to unit please schedule appointment for the on-site crane to help load

57
Pilgrim drill press model SIT � 200 serial number
78443 Please schedule appointment for on-site crane to assist in loading. See pictures.



60
Large industrial fan hardwired in buyer must
remove wiring we used the fan works very well.

61
Large table vice bolted to table Buyer must
removed from table. Please bring tools. See pictures.



64
Hydraulic press includes foot pedals in
Accessories bolted to floor. Please bring tools to remove on site crane available to help lift.


66
Miller CP � 250TS welder Constant potential DC
arc welding, power source Serial number 01686E0377

67
KYSR BSTEAL CUTTING BAND SAW
As to steel rollers bolted to the floor that belong to the band, Shaw hardwired and Buyer must remove power Has blade with it On site crane available to lift for loading may need to be cut free from floor. looks like its bolted to the floor

68
Gas tank cart with settling hoses and extension
cord attached along with wire feed welding handle see pictures






74
Rolling diamond plate, storage or toolbox
lockable see pictures includes bug zapper

75
Vanguard gas heater. Vintage ceramic heater runs
off of natural gas. See pictures.

76
Miller CP � 300 DC Emperor 500 Volts 32 Duty
cycle 100% Max OCV 44 NEMA class one On cart with lines and Miller 22, a 24 V wire feed on cart See pictures

77
Miller 140 auto set 120 V wire welder volts 18 A
90 cycle duty 20% maximum OCV 28 amperage range 30�140 On cart has lines Owners manual included See pictures


79
Hypertherm plasma torch Max 100 plasma ark
cutting system MI � 69 has owners manual





84
Tool lot, including files level right angle, cut
off wheel caulking, gun regulator, see pictures








92
Still working rods to be used to pull steel
through or use to release fifth wheel see pictures

93
Large steel table for welding and metalworks
contents of table not included On site crane available to assist in loading


95
Bench grinder with cut off wheel metal buffer
bolted to the floor. Please bring tools to remove from floor. See pictures

96
Bench grinder with two grinding wheels Bolted
to floor please bring tools to remove from floor

97
Jet drill press Model number, JDP � 17MF Bol to
the floor, please bring tools to remove See pictures



100
Massive chain for crane use Schedule appointment
for pick up will be used to move heavy equipment around on facility with overhead crane pick up after may 9th

101
Chain for overhead crane please schedule
appointment for pick up chain will be used on site to move heavy equipment pick up after may 9th





106
Contents of wall shelf and metal storage box on
stand Includes everything on two shelves wall time clock see pictures



109
Two commercial electric 16 inch LED industrial
high lights 3000 lm daylight bright see pictures

110
Small table with miscellaneous tools, clamp
bench, grinder, tools, seat, picture

111
Still work table includes blades, cut off wheels
and grinder jack anchor, miscellaneous items. See pictures.





116
Red Bull racing hood Chain welded in S shape
along with stainless steel countertop pieces





















Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend







Sponsored Links

FRAZIER WELDING & STEEL CO.

Powell Auction & Realty, LLC

Powell Auction & Realty, LLC


Contact: Kenny Phillips
Phone: 865-938-3403
Sale Location
Frazier Welding & Steel 917 Cooper St.
Knoxville, TN 37917
Sale Dates and Times
Sale Terms and Conditions
### IF YOU FAIL TO READ THE TERMS OF THE SALE YOUR STILL RESPONSIBLE TO THE FOLLOWING TERMS### Everything will be sold As-Is Where-Is; without guarantee or warranty expressed or implied. Items become the sole responsibility of purchaser. All sales are final! BIDDER CONTRACT: In order to bid at this auction you must meet registration requirements. By registering and obtaining a bidders number you are demonstrating that you fully understand, accept and agree to all conditions and terms set forth for this auction, whether in writing or implied verbally. BUYER RESPONSIBILITY: From the moment auctioneer deems items sold, it becomes the sole responsibility of buyer. Reasonable care will be made by auction company to safeguard purchases, but in the event of theft, vandalism, accidental, or purposeful damage, negligence and/or and Act of God, Buyer agrees to hold auction company harmless. WARRANTY: All information contained herein is true and correct to the best of auction company's knowledge, but it is in no way guaranteed as to the accuracy of description made. Every items sold 'as is where is' without warranty as to usefulness or merchantability. Bidder/Buyer has opportunity during inspection days prior to auction to inspect or have inspected by third party all items contained in this auction. POWELL AUCTION & REALTY LLC. and its Employees act merely as agents for sellers. All auctions are with reserve unless specifically stated otherwise. Reserves, if any, ARE NOT disclosed unless advertised as 'ABSOLUTE.' Auctioneers at their discretion may place a reserve bid on behalf of the seller. All final bids are subject to the seller's confirmation. Only the top bidder will be contacted as to the status of his/her bid. While the information we provide on item(s) is deemed correct, no warranties are expressed or implied as to any items being sold and you agree to purchase and accept the item in an as-is condition. Information on items is obtained by us from the sellers and you hereby agree to hold harmless POWELL AUCTION, LLC and their Employees for any errors or omissions regarding the item(s) being sold. This information includes but is not limited to year, model, machine or engine hours, physical condition, options, features and other data pertinent to the value of the item. ALL ITEMS ARE SOLD AS-IS WHERE-IS unless specific factory or seller issued warranties are listed in the item description. You acknowledge that you have the right and responsibility to inspect the item(s) personally, or to have a third party representative inspect the item(s) for you. That by bidding on an item you have agreed to accept that item in its present condition at its present location and with the description provided whether accurate or not. Timed Online only Auction Close. Timed online auctions will begin to close on the date and time listed. Lots will remain open until no bids have been placed within the last 2 minutes. Timed online auctions normally close at a rate of one lot per minute. POWELL AUCTION,LLC reserves the right to close multiple lots per minute at their discretion. Upon your accepted bid of an item, that item shall immediately become your responsibility and be at your risk (whether you have paid for that item or not). You agree that POWELL AUCTION,LLC . its employees, and their sellers are not responsible for lost, stolen or damaged items and will not reimburse or discount items for any type of loss. Buyers are responsible for any costs incurred to prepare their item(s) for transport and/or shipping. This includes but is not necessarily limited to the cost of any rigging, disassembly, special loading requirements, transport, packaging, insurance and all other costs related to physical transfer of their item(s). You agree to remit payment and remove from the auction property any purchases within the stated time for the auction being conducted. You further understand and agree that failure to remove items in the stated time for the auction will subject you to moving and storage fees unless arrangements have been made with the seller. When using our online auction services you are making firm commitments to purchase said item(s) and are entering into a legal and binding contract. Bids may not be cancelled or retracted for any reason. Non paying bidders or fraudulent bidding will subject you to legal recourse and possible criminal charges including any fraud and/or interstate commerce violations. You also acknowledge that the Internet may be an unreliable and error prone network. POWELL AUCTION,LLC will not guarantee that bids placed online will always be transmitted to or received by the auctioneer in a timely fashion. You agree to hold POWELL AUCTION,LLC and their employees harmless for any interruptions in online bidding. Further, the auctioneer has the sole discretion to accept or refuse any bid. POWELL AUCTION,LLC retain the right, at our sole discretion, to add, delete or change some or all of our online services and the terms and conditions governing their online auctions at any time without notice. ABANDONMENT POLICY POWELL AUCTION, LLC provides this Abandonment Policy to inform you of our policies and procedures regarding any purchased item(s)/property that has not been removed by a buyer in a timely manner. Upon winning the bid for an item(s), after paying for item(s) purchased, a buyer is obligated to remove the item(s) from the auction site within a timely manner. POWELL AUCTION,LLC may deem a buyer's failure to claim and remove equipment within 10 days following the close of an auction as evidence of buyer's intention to abandon the property. In these instances, POWELL AUCTION,LLC may take action that is adverse to buyer's interest in the property, including, but not limited to steps to dispose of the property. Disposition of property may include a variety of approaches based upon the buyer's purchase price of the property as follows: 1) For those items with a final selling price of $5,000 or less, POWELL AUCTION,LLC will determine the appropriate disposition approach which may include: a. Removing and disposing as the company sees fit. b. Allowing seller to retain or scrap. c. Sell the item(s), whereby POWELL AUCTON,LLC will remit the sales proceeds to POWELL AUCTION,LLC , for selling and advertising expenses, storage costs, plus administrative fee. 2) For those items with a final selling price of greater than $5,000, POWELL AUCTION,LLC may remove the item from the selling location and resolve as follows: a. POWELL AUCTION,LLC may charge the buyer's storage fees of $25 per day, with the total amount not to exceed $1,500. b. Sell the item(s), whereby POWELL AUCTION,LLC will remit the sales proceeds to POWELL AUCTION, for selling and advertising expenses, storage costs, administrative fee. All information contained in descriptions in catalog and Internet are made with auction company's knowledge and information, but are not guaranteed. Bidder/Buyer assumes all responsibility to determine the correct information, including but not limited to kind, age, year, model condition, make, serial number, etc. No sale shall be invalidated by inaccuracies, defects, damaged goods, or incorrect descriptions. When purchasing EQUIPMENT, it is highly recommended that you have a inspected any and all moving parts, nuts, bolts, oil, gas, ect. Powell Auction nor its staff have inspected equipment prior to the auction. All items are sold as is, where is. �Failure to preview items to be sold does not constitute grounds for refunds. The bidder agrees under no circumstances to stop payment on checks or credit cards. BY SIGNING INTO THIS AUCTION YOU AGREE TO ALL TERMS & CONDITIONS OF THIS AUCTION.
Listing Details
Auction ends May 6th 2024 pick up may 8th and 9th 9am to 4pm both days This auction was a family ran fab and metal shop started back in the 1960's. you will find: tools welding equipment plasma torches welding rods and wire also large items like: presses form roller drill press stop break and so much more. 15% IF PAY BY CASH OR APPROVED CHECK ON MONDAY, APRIL 29 FROM 9AM - 2PM EDT. NO SHIPPING, LOCAL PICKUP ONLY!!! BE SURE AND BRING HELP TO LOAD YOUR ITEMS ON PICKUP DAY. WE WILL HAVE A FORK LIFT ON SITE TO ASSIST WITH LOADING. BUYER WILL BE RESPONSIBLE FOR SECURING YOUR LOAD BEFORE LEAVING. SOME MACHINERY WILL NEED TO BE DISCONNECTED FROM THE POWER, BUYER WILL BE RESPONSIBLE FOR DOING THIS AND ENSUREING THE WIRES ARE CAPPED AFTER REMOVAL. ALL SALES ARE FINAL.

1
PLEASE READ INPORTANT INFO!!
Some items are bolted to floor or wall. Please bring your own tolls. things like socket sets (MM or SAE) cordless grinder and or sawzall Staff will not have tools to remove. Forklift and over crane can be used (by employees only) to load some items L...

2
TERMS OF THE AUCTION: 18% BUYERS PREMIUM -
15% IF PAY BY CASH OR APPROVED CHECK ON Tuesday may 7th FROM 9AM - 2PM EDT. NO SHIPPING, LOCAL PICKUP ONLY!!! BE SURE AND BRING HELP TO LOAD YOUR ITEMS ON PICKUP DAY. WE WILL HAVE A FORK LIFT ON SITE TO ASSIST WITH LOADING. BUYER WILL BE RESPONSIBLE...

3
Dates
Auction ends May 6th 2024 pick up May 8th and 9th from 9am to 4pm both days please bring loading help trailers for the large items we will set a appointment to have flat bed pick up. please contact office to set up appt. Preview will be Monday may 6...






9
Miller Syncrowave 350 Constant current AC/DC arc
welding power source has ground line distilled water tank. See pictures.

10
Contents of metal rack includes cut off wheels
wire flare, tool, metal brushes, foot pedal, etc. see pictures

11
Full room lot includes welding, hose galvanized,
pipe, fittings, extension, cords, nuts, bolts, vintage pulleys salt, blades, buffing, wheels see pictures

12
Regulators foot pedal
Contents of shelf


14
Rolling cart made from steal
items on cart not included

15
Welding rods, spools of wire feed weld
see pictures many sizes and thickness of rods and wire.



18
Drive onto car hoist unknown weight capacity
buyer must disassemble on pick up day

19
Miller welder model SR 300 serial number 25364 V
230/460 A 58/29 no leads with unit



22
Large scrap metal lot round tubing angle, iron
diamond plate, sheet metal, miscellaneous, aluminum, and steel pieces


24
Miscellaneous sheet metal lot on cart cart is
available in lot if Buyer wants it

25

26
Multiple size of welding rods inside of chemo
storage container storage container comes with a lot



29
And crank sheet metal rolling form on Stan bolted
to ground please bring tools to remove


31



34
Lot full of ground stick feed welders wire feed
welder see pictures Just the lines only

35
Table with contents 1 gallon pressure sprayer
angle, iron wheelbarrow, or dolly wheels table included



38
Shelf lot includes time clock breakers,
submersible pump, miscellaneous parts two working welders see pictures

39
Linde VI-400 Cv/dc power supply Output
210/450 60 HZ 3 pH 56/28 AMps

40
Metal lathe Carol, Jamison machine tool company,
Ohio Speed 14 RPM up to 510 RPM Has case with extra parts see pictures



43
Round tubing to believe to be chrome Molly or
molly tubing also aluminum and steel pipe wall rack stays with building see pictures

44
Large lot square tubing, round tubing, stainless,
see notch, angle, iron, and round Buyer can take the rack. It all sits on see pictures.




48
Chain winch, unknown, weight attached to trolley,
trolley and rail. Do not come with lot. See pictures.

49
Diamond plate toolbox Buyer must bring bolt cutter
to remove from beam on wheels multiple compartments all lockable with padlock no padlock included. See pictures.

50
Web sheet metal roller electric powered A must
see Buyer must schedule appointment for pick up On site crane must be used. See pictures.

51
12 post rolling system for sheet metal unknown
maker Buyer, may need to schedule appointment for pick up Over head crane can be used.

52
HTC sheer model U3 7�10 serial number
U12761043 Capacity three eight mid steel 500 N/FT rake Hydraulic powered Buyer, my schedule appointment for pick up On site crane will be used to load

53
Thick and thin sheet metal with rack please
schedule appointment for pick up. On site crane must be used.


53
Air hose real
Bolted to wall, please bring tools


54
HTC hydraulic brake press 220 V/ 460v 55/27.5
amp Hydraulic motor power 50/25 amp Appointment needs to be scheduled for pick up. The on-site crane will be available to lift.

55
Steel miter saw with rolling tables bolted to the
floor please bring tools to remove from floor and schedule appointment for the on-site crane to load



56
Buffalo dip press has owners manual Model number
F � 4788 � B has dies inside case next to unit please schedule appointment for the on-site crane to help load

57
Pilgrim drill press model SIT � 200 serial number
78443 Please schedule appointment for on-site crane to assist in loading. See pictures.



60
Large industrial fan hardwired in buyer must
remove wiring we used the fan works very well.

61
Large table vice bolted to table Buyer must
removed from table. Please bring tools. See pictures.



64
Hydraulic press includes foot pedals in
Accessories bolted to floor. Please bring tools to remove on site crane available to help lift.


66
Miller CP � 250TS welder Constant potential DC
arc welding, power source Serial number 01686E0377

67
KYSR BSTEAL CUTTING BAND SAW
As to steel rollers bolted to the floor that belong to the band, Shaw hardwired and Buyer must remove power Has blade with it On site crane available to lift for loading may need to be cut free from floor. looks like its bolted to the floor

68
Gas tank cart with settling hoses and extension
cord attached along with wire feed welding handle see pictures






74
Rolling diamond plate, storage or toolbox
lockable see pictures includes bug zapper

75
Vanguard gas heater. Vintage ceramic heater runs
off of natural gas. See pictures.

76
Miller CP � 300 DC Emperor 500 Volts 32 Duty
cycle 100% Max OCV 44 NEMA class one On cart with lines and Miller 22, a 24 V wire feed on cart See pictures

77
Miller 140 auto set 120 V wire welder volts 18 A
90 cycle duty 20% maximum OCV 28 amperage range 30�140 On cart has lines Owners manual included See pictures


79
Hypertherm plasma torch Max 100 plasma ark
cutting system MI � 69 has owners manual





84
Tool lot, including files level right angle, cut
off wheel caulking, gun regulator, see pictures








92
Still working rods to be used to pull steel
through or use to release fifth wheel see pictures

93
Large steel table for welding and metalworks
contents of table not included On site crane available to assist in loading


95
Bench grinder with cut off wheel metal buffer
bolted to the floor. Please bring tools to remove from floor. See pictures

96
Bench grinder with two grinding wheels Bolted
to floor please bring tools to remove from floor

97
Jet drill press Model number, JDP � 17MF Bol to
the floor, please bring tools to remove See pictures



100
Massive chain for crane use Schedule appointment
for pick up will be used to move heavy equipment around on facility with overhead crane pick up after may 9th

101
Chain for overhead crane please schedule
appointment for pick up chain will be used on site to move heavy equipment pick up after may 9th





106
Contents of wall shelf and metal storage box on
stand Includes everything on two shelves wall time clock see pictures



109
Two commercial electric 16 inch LED industrial
high lights 3000 lm daylight bright see pictures

110
Small table with miscellaneous tools, clamp
bench, grinder, tools, seat, picture

111
Still work table includes blades, cut off wheels
and grinder jack anchor, miscellaneous items. See pictures.





116
Red Bull racing hood Chain welded in S shape
along with stainless steel countertop pieces





















Gallery Images Loading, Please Wait...
  • Home
  • Advertise Your Estate Sale for $39
  • Hire an Estate Sale Company
  • Add Your Estate Sale Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
FRAZIER WELDING & STEEL CO.
 Online Only Auction
Sale Date(s)
Bidding Starts: Monday Apr 15
Bidding Ends: Monday May 6
Sale Location

Knoxville, TN 37917
Company
Powell Auction & Realty, LLC

Contact: Kenny Phillips
Phone: 865-938-3403
Website: www.powellauction.com

Listing Terms and Conditions
### IF YOU FAIL TO READ THE TERMS OF THE SALE YOUR STILL RESPONSIBLE TO THE FOLLOWING TERMS### Everything will be sold As-Is Where-Is; without guarantee or warranty expressed or implied. Items become the sole responsibility of purchaser. All sales are final! BIDDER CONTRACT: In order to bid at this auction you must meet registration requirements. By registering and obtaining a bidders number you are demonstrating that you fully understand, accept and agree to all conditions and terms set forth for this auction, whether in writing or implied verbally. BUYER RESPONSIBILITY: From the moment auctioneer deems items sold, it becomes the sole responsibility of buyer. Reasonable care will be made by auction company to safeguard purchases, but in the event of theft, vandalism, accidental, or purposeful damage, negligence and/or and Act of God, Buyer agrees to hold auction company harmless. WARRANTY: All information contained herein is true and correct to the best of auction company's knowledge, but it is in no way guaranteed as to the accuracy of description made. Every items sold 'as is where is' without warranty as to usefulness or merchantability. Bidder/Buyer has opportunity during inspection days prior to auction to inspect or have inspected by third party all items contained in this auction. POWELL AUCTION & REALTY LLC. and its Employees act merely as agents for sellers. All auctions are with reserve unless specifically stated otherwise. Reserves, if any, ARE NOT disclosed unless advertised as 'ABSOLUTE.' Auctioneers at their discretion may place a reserve bid on behalf of the seller. All final bids are subject to the seller's confirmation. Only the top bidder will be contacted as to the status of his/her bid. While the information we provide on item(s) is deemed correct, no warranties are expressed or implied as to any items being sold and you agree to purchase and accept the item in an as-is condition. Information on items is obtained by us from the sellers and you hereby agree to hold harmless POWELL AUCTION, LLC and their Employees for any errors or omissions regarding the item(s) being sold. This information includes but is not limited to year, model, machine or engine hours, physical condition, options, features and other data pertinent to the value of the item. ALL ITEMS ARE SOLD AS-IS WHERE-IS unless specific factory or seller issued warranties are listed in the item description. You acknowledge that you have the right and responsibility to inspect the item(s) personally, or to have a third party representative inspect the item(s) for you. That by bidding on an item you have agreed to accept that item in its present condition at its present location and with the description provided whether accurate or not. Timed Online only Auction Close. Timed online auctions will begin to close on the date and time listed. Lots will remain open until no bids have been placed within the last 2 minutes. Timed online auctions normally close at a rate of one lot per minute. POWELL AUCTION,LLC reserves the right to close multiple lots per minute at their discretion. Upon your accepted bid of an item, that item shall immediately become your responsibility and be at your risk (whether you have paid for that item or not). You agree that POWELL AUCTION,LLC . its employees, and their sellers are not responsible for lost, stolen or damaged items and will not reimburse or discount items for any type of loss. Buyers are responsible for any costs incurred to prepare their item(s) for transport and/or shipping. This includes but is not necessarily limited to the cost of any rigging, disassembly, special loading requirements, transport, packaging, insurance and all other costs related to physical transfer of their item(s). You agree to remit payment and remove from the auction property any purchases within the stated time for the auction being conducted. You further understand and agree that failure to remove items in the stated time for the auction will subject you to moving and storage fees unless arrangements have been made with the seller. When using our online auction services you are making firm commitments to purchase said item(s) and are entering into a legal and binding contract. Bids may not be cancelled or retracted for any reason. Non paying bidders or fraudulent bidding will subject you to legal recourse and possible criminal charges including any fraud and/or interstate commerce violations. You also acknowledge that the Internet may be an unreliable and error prone network. POWELL AUCTION,LLC will not guarantee that bids placed online will always be transmitted to or received by the auctioneer in a timely fashion. You agree to hold POWELL AUCTION,LLC and their employees harmless for any interruptions in online bidding. Further, the auctioneer has the sole discretion to accept or refuse any bid. POWELL AUCTION,LLC retain the right, at our sole discretion, to add, delete or change some or all of our online services and the terms and conditions governing their online auctions at any time without notice. ABANDONMENT POLICY POWELL AUCTION, LLC provides this Abandonment Policy to inform you of our policies and procedures regarding any purchased item(s)/property that has not been removed by a buyer in a timely manner. Upon winning the bid for an item(s), after paying for item(s) purchased, a buyer is obligated to remove the item(s) from the auction site within a timely manner. POWELL AUCTION,LLC may deem a buyer's failure to claim and remove equipment within 10 days following the close of an auction as evidence of buyer's intention to abandon the property. In these instances, POWELL AUCTION,LLC may take action that is adverse to buyer's interest in the property, including, but not limited to steps to dispose of the property. Disposition of property may include a variety of approaches based upon the buyer's purchase price of the property as follows: 1) For those items with a final selling price of $5,000 or less, POWELL AUCTION,LLC will determine the appropriate disposition approach which may include: a. Removing and disposing as the company sees fit. b. Allowing seller to retain or scrap. c. Sell the item(s), whereby POWELL AUCTON,LLC will remit the sales proceeds to POWELL AUCTION,LLC , for selling and advertising expenses, storage costs, plus administrative fee. 2) For those items with a final selling price of greater than $5,000, POWELL AUCTION,LLC may remove the item from the selling location and resolve as follows: a. POWELL AUCTION,LLC may charge the buyer's storage fees of $25 per day, with the total amount not to exceed $1,500. b. Sell the item(s), whereby POWELL AUCTION,LLC will remit the sales proceeds to POWELL AUCTION, for selling and advertising expenses, storage costs, administrative fee. All information contained in descriptions in catalog and Internet are made with auction company's knowledge and information, but are not guaranteed. Bidder/Buyer assumes all responsibility to determine the correct information, including but not limited to kind, age, year, model condition, make, serial number, etc. No sale shall be invalidated by inaccuracies, defects, damaged goods, or incorrect descriptions. When purchasing EQUIPMENT, it is highly recommended that you have a inspected any and all moving parts, nuts, bolts, oil, gas, ect. Powell Auction nor its staff have inspected equipment prior to the auction. All items are sold as is, where is. �Failure to preview items to be sold does not constitute grounds for refunds. The bidder agrees under no circumstances to stop payment on checks or credit cards. BY SIGNING INTO THIS AUCTION YOU AGREE TO ALL TERMS & CONDITIONS OF THIS AUCTION.
Auction ends May 6th 2024 pick up may 8th and 9th 9am to 4pm both days This auction was a family ran fab and metal shop started back in the 1960's. you will find: tools welding equipment plasma torches welding rods and wire also large items like: presses form roller drill press stop break and so much more. 15% IF PAY BY CASH OR APPROVED CHECK ON MONDAY, APRIL 29 FROM 9AM - 2PM EDT. NO SHIPPING, LOCAL PICKUP ONLY!!! BE SURE AND BRING HELP TO LOAD YOUR ITEMS ON PICKUP DAY. WE WILL HAVE A FORK LIFT ON SITE TO ASSIST WITH LOADING. BUYER WILL BE RESPONSIBLE FOR SECURING YOUR LOAD BEFORE LEAVING. SOME MACHINERY WILL NEED TO BE DISCONNECTED FROM THE POWER, BUYER WILL BE RESPONSIBLE FOR DOING THIS AND ENSUREING THE WIRES ARE CAPPED AFTER REMOVAL. ALL SALES ARE FINAL.

1
PLEASE READ INPORTANT INFO!!
Some items are bolted to floor or wall. Please bring your own tolls. things like socket sets (MM or SAE) cordless grinder and or sawzall Staff will not have tools to remove. Forklift and over crane can be used (by employees only) to load some items L...

2
TERMS OF THE AUCTION: 18% BUYERS PREMIUM -
15% IF PAY BY CASH OR APPROVED CHECK ON Tuesday may 7th FROM 9AM - 2PM EDT. NO SHIPPING, LOCAL PICKUP ONLY!!! BE SURE AND BRING HELP TO LOAD YOUR ITEMS ON PICKUP DAY. WE WILL HAVE A FORK LIFT ON SITE TO ASSIST WITH LOADING. BUYER WILL BE RESPONSIBLE...

3
Dates
Auction ends May 6th 2024 pick up May 8th and 9th from 9am to 4pm both days please bring loading help trailers for the large items we will set a appointment to have flat bed pick up. please contact office to set up appt. Preview will be Monday may 6...

5

5

6

7

8

9
Miller Syncrowave 350 Constant current AC/DC arc
welding power source has ground line distilled water tank. See pictures.

10
Contents of metal rack includes cut off wheels
wire flare, tool, metal brushes, foot pedal, etc. see pictures

11
Full room lot includes welding, hose galvanized,
pipe, fittings, extension, cords, nuts, bolts, vintage pulleys salt, blades, buffing, wheels see pictures

12
Regulators foot pedal
Contents of shelf

13

14
Rolling cart made from steal
items on cart not included

15
Welding rods, spools of wire feed weld
see pictures many sizes and thickness of rods and wire.

16

17

18
Drive onto car hoist unknown weight capacity
buyer must disassemble on pick up day

19
Miller welder model SR 300 serial number 25364 V
230/460 A 58/29 no leads with unit

20

21

22
Large scrap metal lot round tubing angle, iron
diamond plate, sheet metal, miscellaneous, aluminum, and steel pieces

23

24
Miscellaneous sheet metal lot on cart cart is
available in lot if Buyer wants it

25

26
Multiple size of welding rods inside of chemo
storage container storage container comes with a lot

27

28

29
And crank sheet metal rolling form on Stan bolted
to ground please bring tools to remove

30

31

32

33

34
Lot full of ground stick feed welders wire feed
welder see pictures Just the lines only

35
Table with contents 1 gallon pressure sprayer
angle, iron wheelbarrow, or dolly wheels table included

36

37

38
Shelf lot includes time clock breakers,
submersible pump, miscellaneous parts two working welders see pictures

39
Linde VI-400 Cv/dc power supply Output
210/450 60 HZ 3 pH 56/28 AMps

40
Metal lathe Carol, Jamison machine tool company,
Ohio Speed 14 RPM up to 510 RPM Has case with extra parts see pictures

41

42

43
Round tubing to believe to be chrome Molly or
molly tubing also aluminum and steel pipe wall rack stays with building see pictures

44
Large lot square tubing, round tubing, stainless,
see notch, angle, iron, and round Buyer can take the rack. It all sits on see pictures.

45

46

47

48
Chain winch, unknown, weight attached to trolley,
trolley and rail. Do not come with lot. See pictures.

49
Diamond plate toolbox Buyer must bring bolt cutter
to remove from beam on wheels multiple compartments all lockable with padlock no padlock included. See pictures.

50
Web sheet metal roller electric powered A must
see Buyer must schedule appointment for pick up On site crane must be used. See pictures.

51
12 post rolling system for sheet metal unknown
maker Buyer, may need to schedule appointment for pick up Over head crane can be used.

52
HTC sheer model U3 7�10 serial number
U12761043 Capacity three eight mid steel 500 N/FT rake Hydraulic powered Buyer, my schedule appointment for pick up On site crane will be used to load

53
Thick and thin sheet metal with rack please
schedule appointment for pick up. On site crane must be used.

53

53
Air hose real
Bolted to wall, please bring tools

53

54
HTC hydraulic brake press 220 V/ 460v 55/27.5
amp Hydraulic motor power 50/25 amp Appointment needs to be scheduled for pick up. The on-site crane will be available to lift.

55
Steel miter saw with rolling tables bolted to the
floor please bring tools to remove from floor and schedule appointment for the on-site crane to load

55

55

56
Buffalo dip press has owners manual Model number
F � 4788 � B has dies inside case next to unit please schedule appointment for the on-site crane to help load

57
Pilgrim drill press model SIT � 200 serial number
78443 Please schedule appointment for on-site crane to assist in loading. See pictures.

58

59

60
Large industrial fan hardwired in buyer must
remove wiring we used the fan works very well.

61
Large table vice bolted to table Buyer must
removed from table. Please bring tools. See pictures.

62

63

64
Hydraulic press includes foot pedals in
Accessories bolted to floor. Please bring tools to remove on site crane available to help lift.

65

66
Miller CP � 250TS welder Constant potential DC
arc welding, power source Serial number 01686E0377

67
KYSR BSTEAL CUTTING BAND SAW
As to steel rollers bolted to the floor that belong to the band, Shaw hardwired and Buyer must remove power Has blade with it On site crane available to lift for loading may need to be cut free from floor. looks like its bolted to the floor

68
Gas tank cart with settling hoses and extension
cord attached along with wire feed welding handle see pictures

69

70

71

72

73

74
Rolling diamond plate, storage or toolbox
lockable see pictures includes bug zapper

75
Vanguard gas heater. Vintage ceramic heater runs
off of natural gas. See pictures.

76
Miller CP � 300 DC Emperor 500 Volts 32 Duty
cycle 100% Max OCV 44 NEMA class one On cart with lines and Miller 22, a 24 V wire feed on cart See pictures

77
Miller 140 auto set 120 V wire welder volts 18 A
90 cycle duty 20% maximum OCV 28 amperage range 30�140 On cart has lines Owners manual included See pictures

78

79
Hypertherm plasma torch Max 100 plasma ark
cutting system MI � 69 has owners manual

80

81

82

83

84
Tool lot, including files level right angle, cut
off wheel caulking, gun regulator, see pictures

85

86

87

88

89

90

91

92
Still working rods to be used to pull steel
through or use to release fifth wheel see pictures

93
Large steel table for welding and metalworks
contents of table not included On site crane available to assist in loading

94

95
Bench grinder with cut off wheel metal buffer
bolted to the floor. Please bring tools to remove from floor. See pictures

96
Bench grinder with two grinding wheels Bolted
to floor please bring tools to remove from floor

97
Jet drill press Model number, JDP � 17MF Bol to
the floor, please bring tools to remove See pictures

98

99

100
Massive chain for crane use Schedule appointment
for pick up will be used to move heavy equipment around on facility with overhead crane pick up after may 9th

101
Chain for overhead crane please schedule
appointment for pick up chain will be used on site to move heavy equipment pick up after may 9th

102

103

104

105

106
Contents of wall shelf and metal storage box on
stand Includes everything on two shelves wall time clock see pictures

107

108

109
Two commercial electric 16 inch LED industrial
high lights 3000 lm daylight bright see pictures

110
Small table with miscellaneous tools, clamp
bench, grinder, tools, seat, picture

111
Still work table includes blades, cut off wheels
and grinder jack anchor, miscellaneous items. See pictures.

112

113

114

115

116
Red Bull racing hood Chain welded in S shape
along with stainless steel countertop pieces

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135