TERMS & CONDITIONS
BY PLACING A BID, BIDDER CERTIFIES THAT THEY HAVE READ AND WILL ABIDE BY ALL TERMS AND CONDITIONS AS STATED BELOW. IT IS THE BUYER'S RESPONSIBILITY TO UNDERSTAND ALL THE TERMS AND CONDITIONS PRIOR TO BIDDING.

All items are sold "AS IS, WHERE IS" with no warranty or guarantees, expressed or implied, by the seller or Hallberg Auction. Bidders accept all auction items/property "WITH ALL FAULTS", whether or not immediately apparent. It is strongly recommended that bidders thoroughly inspect items before placing a bid. Items are described as accurately as possible, but do not represent any guarantee by the seller or Hallberg Auction. By placing a bid, bidder signifies that they have inspected the item to their satisfaction.
By placing a bid, the bidder is entering into a contractual agreement to purchase the item(s) from the seller. Failure to follow through with payment and pickup of items could result in legal collection proceedings.

Pictures and Item Descriptions
Multiple photos will be included in item descriptions whenever possible; however, photos may or may not fully represent the item. Lighting, surroundings and other factors can affect the perception of an item in a photo; therefore, all bidders are responsible for their own personal inspection of the item(s) before placing a bid. Photos and descriptions are to be used as a guideline only.

Odometer, Mileage & Hour Meter readings are assumed to be correct. These assumptions do not constitute a guarantee. It is up to the bidder to validate the accuracy of the reading during the inspection process. Hallberg Auction is not liable for any inaccuracies pertaining to odometer, mileage and hour meter readings.

Auction Software
Hallberg Auction will not be held liable for any software or software malfunction discrepancies.

Invoicing
An invoice and payment instructions will be sent to each buyers registered email at the close of the auction. Please read email message completely for payment instructions. Please contact us at (800) 373-2255 if you do not receive an invoice from us within 24 hours of auction close.

Payment
Successful bidders must contact Hallberg Auction within 24 hours after receiving their invoice to confirm their method of payment.

Payment must be received within 7 days after the conclusion of the auction.

If payment is not received or payment arrangements made within 7 days after the conclusion of the auction, the buyer will lose all right, title and interest to the item(s), including any and all moneys.

Auction items will not be released for pickup until payment is made in full. Failure to comply with these terms will prohibit bidder from participating in future live or on-line auctions conducted by Hallberg Auction.

Item Pickup
Removal and/or transportation of item(s) won on auction shall be at the expense, liability and risk of the buyer. Any Items not removed within 3 weeks of the conclusion of the auction, unless arrangements have been made and agreed upon by seller, will be considered abandoned and the purchaser will lose all right, title and interest to the property, including any and all moneys from the buyer.

Returned Check Fees
A fee of $35.00 will be assessed on returned checks and may result in the bidder being denied access to future auctions. Be sure you are capable of paying immediately after the conclusion of the auction and realize your bids are not conditional upon financing.

Payment Procedures
Payments will be made to Hallberg Auction.
Forms of payment: Company/Personal Check, Cash, or Credit Card (with a 4% convenience fee for use of a credit card).
All Checks are to be made payable to Hallberg Auction
Mail checks to:
2409 Hwy 9
Buffalo Center, IA 50424

*Please include your bidder number in the memo line

If paying by credit card, please call our office at 800-373-2255 with your credit card information.
We accept Master Card, Visa, American Express and Discover.
There is a 4% convenience fee per transaction for all credit card purchases.

Titles
Titles will be sent via standard mail within ten days after payment has been received, unless otherwise specified in the description of the item, and will be mailed to the address provided by bidder upon registration.

Reserve Bidding
Items on auction may have an undisclosed reserve. Sellers, Hallberg Auction, or other agent of seller may bid on items up to reserve amount in order to aid in the sale of the item.
*By placing a bid, bidder signifies that they have inspected items to their satisfaction.
*Hallberg Auction reserves the right to remove any property prior to close of the auction.
*Hallberg Auction reserves the right to reject any bid at our discretion.
*Bidders who register at any of our auctions will be included in our mailing lists to receive print or digital communication regarding upcoming auctions. Your information will not be sold to third parties and you may opt out of receiving notices at any time.
Item Descriptions are for Identification purposes; they constitute no warranties expressed or implied. You are encouraged to make your own in-person inspection of all property before bidding.

Two Day Sapp Machinery Auction 2409 Highway 9, Buffalo Center, Iowa Thursday July 20th at 9:00 a.m. Live auction with online simulcast bidding To consign call Hallberg Auction 800-373-2255 Tractors, Skid-loaders, Backhoe, Forklift, Attachments: John Deere 4650 (MFWD, PS, Duals, Front Weights), John Deere 4240 (3100 Actual Hours, QR, WL 42 Loader, Nicest Around), John Deere 4630 (7064 hours, 42: Rubber, Powershift, Front Weights, LED Light, Nice), John Deere 2510 (Gas, Syncro, Rollbar, Fenders, Dual Valves, Front Weights, Super Nice!), John Deere 620 (Good Rubber, Good Runner), John Deere 420 (Restored, New Rubber, Three Point, Front Weight), John Deere 80 (Restored, Diesel Pony Start, New Rubber), John Deere 70 Wheatland (Diesel, Restored, New Rubber), John Deere 60 (High Seat, Restored, New Rubber), John Deere 60 Wheatland (Low Seat, Restored, New Rubber), John Deere 50 (Restored, Wide Front, Fenders, New Rubber), John Deere G (Runs), John Deere B (Styled, Good Rubber, Runs), International 656 (Gas, Nice Original Tractor with Rebuilt Motor), Farmall 560 (Gas, Fenders), Farmall Super C with Woods 306L Belly Mower (Like New Rear Rubber), Farmall C with Belly Mower (Good Rubber), '48 Farmall Super A (Very Nice, Parade Ready), '55 Farmall Cub Lowboy (Restored), Farmall F30 (Been Sitting), Allis Chalmers WC (Been Sitting), Mc Cormick Deering 1020 (Restored, New Rubber), Case 311 (Good Rubber, Eagle Hitch, Engine Noise), New Holland NH2C24D (4×4, 3500 hours), Ford 2N, Bobcat 610 (Nice, Gas), Oliver 70, Lahman Skid-loader (855 hours, Gas), Case 580C Backhoe (Diesel, Extendahoe), Kalmar P60B Forklift (Needs Valve Body), Schweiss Snowblower (8'), Rock Bucket, Grapple Buckets, Extensions, Long Three Point Backhoe Attachments, more Tillage, Planting, and Spraying Equipment: John Deere 2810 Plow (5 Bottom), John Deere 2800 On Land Plow (6 bottom), Case IH 9 Bottom Plow (On Land), IH 735 Plow (6 bottom), IH 720 Plow (5 bottom, Auto Reset), IH 710 Plow (5 Bottom), IH 710 Plow (4 Bottom), IH Little Wonder Plow, New Holland ST770 Disk Ripper (5 Shank), DMI 527 B Disk Ripper (5 Shank), Tebben Ripper (9 Shank, Tebben Tongue), Landoll 1600 Mounted Ripper (7 Shanks), DMI Mounted Chisel Plow (15 Shank), Bush Hog Mounted Chisel Plow, Melroe 561 Chisel Plow, IH 60 Chisel Plow (11 Shank), Bush Hog Chisel Plow (11 Shank), DMI Pull Type Chisel Plow (13 Shank), John Deere 1600 Chisel Plow (14 Shank), Brinkley Disk Chisel, IH 46 Tandem Disk, John Deere 210 Disk (Very Nice), John Deere RW Disk, John Deere 230 Disk, IH 45 Field Cultivator, Wilrich 3400 Field Cultivator (Five Section Drag, White 5100 Planter (12 row), John Deere 7300 Planter (12 row), John Deere/Van Brunt Drill (10' Double Disk Openers), Case IH 1820 Cultivator (12 row), IH 153 Cultivator (4 Row, Wide), IH 133 Cultivator (12 row), Nine Section Drag, Fast 7420 Sprayer (80' Booms), Nitzche Three Wheel Sprayer, Century Three Point Sprayer, Poly Tank on Bradford Gear, 3200 Gallon Poly Tank, Stainless Tank on Gear, Anhydrous Tanks on Gears, more.. Livestock, Hay, and Forage Harvesting Equipment: Knight 8149 Slinger, New Idea 326 Manure Spreader, Artsway 450 Grinder/Mixer, Schuler HF255 Feedwagon, Stronghold Cattle Chute, New Cattle Bunks, '16 New Holland 316 Discbine (Very Nice), New Holland 114 Haybine, IH 200 Sickle Mower, New Holland 55 Hay Rake, Three Point 10 Wheel V Rake, Sitrex Three Point Wheel Rakes, New Holland BR7090 Round Baler (Net Wrap), New Holland 660 Round Baler, New Holland 270 Square Baler, New Holland 271 Baler, Ford 530 Square Baler, IH 46 Balers, New Hayrack Tops, Hay Racks on Gears, John Deere 5460 (3451 Hours, Local Retirement), John Deere Three Row Head (30"), John Deere Hay Head, Roto Press Silage Bagger (10'), Two H&S HD7+7 Silage Wagons (20', Tandem Gears), Two Farmhand Silage Wagons (Westendorf Gears), Silage Dump Wagon, Artsway 240 B Stalk Chopper (8 row), SunMaster Brush Cutter, John Deere 16A Chopper, John Deere 506 Brush Cutter, Long Two Row Stalk Chopper, Combine and Heads: '00 John Deere 9650 STS Combine (3308/2241 Hours, Duals, Nice), '99 John Deere 893 Corn Head, '07 John Deere 630F Bean Platform, Two John Deere 925 Platforms, John Deere 443 Corn Head, John Deere Oat Pickup Head, more.. Wagons and Grain Handling: Parker 2600, Parker 2500, Three Parker Gravity Boxes (JD 1075 Gears),Parker Wagon on HS 412 Gear, Four Parker 4000 Wagons, Two Parker Wagons with Seed Augers, Several More Parker Wagons, Killbros 350 Center Dump, Killbros Wagon on HS 412 Gear, J&M Gravity Wagon, Dakon 250 Gravity Wagon, Jet Co Barge Box, Flare Box Wagon (JD Gear), Parker 500 Grain Cart, Weigh Wagon, Wheatlnad 13×93 Auger (Swing Hopper), Feterl 10×60 (Swing Hopper), Westfield 8×56, Westfield 10×51, Hutchinson 8×42, Hutchinson Truck Auger, More.. Large Trucks, Trailers, Pickups, Other: '85 Chevrolet C70 (Feed Body), '77 Ford F350 Flatbed, '76 Chevrolet C65 Flatbed, '76 Chevrolet C65 (Reiter Grain Box), '76 GMC C70 (Reiter Grain Box), '75 GMC 6000 (Omaha Standard Box), '04 Wilson Grain Trailer (New Electric Tarp, New Brakes), '01 Jet Grain Trailer (42'), '95 Corn King Grain Trailer (42', Tarp), '11 H&H Flatbed (16' Tandem, Ramp Gate), '76 Semi Flatbed Set Up with Sprayer Tanks, Dressen Cushion Tilt Trailer (21'), Single Axle Hydraulic Dump Trailer,16' Stock Trailer (Bumper Hitch), Several Head Trailers, Triple Axle Gooseneck Trailer, '65 Travel Trailer Camper, Spool Trailer, '99 Chevrolet 2500 with Curtis Snow Plow (4×4, 179,692 miles), '99 Ford F250 (222,000 miles, Diesel, 4×4),'91 GMC 2500 (Diesel, 4×4), '72 Chevrolet C20 (4×4, Rebuilt 350), '16 Polaris RZR 1000 (5280 miles, Nice), Cat 3306 Motor, New 8×12 Shed, Two New Storage Containers (20'), Head Trailers, more. Loader available and drop-offs accepted Monday-Saturday 9:00-5:00, through July 14th. www.hallbergauction.com Tractor Drive-Thru Celebrating Dave Winter's 80th Birthday. Tuesday July 18th from 11:00 a.m.-2:00 p.m. Drive your old tractor or car in and help us celebrate Dave! We will be serving a light lunch and ice cream!