FREE EMAIL NOTIFICATIONS
estate sales & auctions delivered to your inbox

THIS IS A COMPLETED SALE
View current listings by this company

Sawmill Equipment Liquidation & Rolling Stock - Dunnville, KY
Listing ID#: 615516

Sale Location
Dunnville, KY 42528

Sale Dates and TimesSALE IS COMPLETED
Thursday Aug 17, 2023 Completed

Sale Type
Live Auction

Company Information
Bright Star Realty and Auctions, INC Contact: Loren Beachy Email: beachyauctions@gmail.com Website: brightstarauctions.com EstateSale.com ID#: 11117 View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area! You may set up alerts by area (zip and radius), keywords, and by company. It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Bidder Terms and Conditions There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items. These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid. “Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION. “Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids. “Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected. “Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder. “Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms. “Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer. "Buyer" means the Winning Bidder with respect to each Lot of Personal Property. "Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. “Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation. “Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer. “High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot. “High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price. “High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot. "Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event. “Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer. “No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale. “Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions. “Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online. "Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered. “Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers. “Personal Property” means all tangible and moveable property, including fixtures, designated as Property. “Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer. “Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer). “Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction. “Property” means the Real Property and the Personal Property. “Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction. “Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction. “Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE. “Reserve Price” means the minimum price that Seller is willing to accept for specific Property. “Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer. “Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid. “Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller). "Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid. “Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration. Governing Law. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion. Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online: Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller. Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion. Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers. ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyers account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Terms and Conditions

Bidder Terms and Conditions

There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

“Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction.

“Absentee Bidder” means a person or entity that submits an Absentee Bid.

“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.

“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.

“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.

"Buyer" means the Winning Bidder with respect to each Lot of Personal Property.

"Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.

“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Personal Property” means all tangible and moveable property, including fixtures, designated as Property.

“Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium.

"Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.

“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
Governing Law.
1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
9. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
10. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
11. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
12. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.

1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.

Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers.
ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyers account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information.
Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.

No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.
Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Information
After establishing a prosperous presence in the industry, Tarter Wood has made the strategic decision to liquidate its sawmill operations, including the logistics division and a substantial inventory of high-quality rolling stock. This move will allow Tarter Wood to expand its globally renowned enterprise, Tarter Gate Company LLC, within the available space. The equipment selling at no reserve auction is exceptionally well-maintained, predominantly with one owner. Check it out! 00 Information Lot This is an absolute auction, meaning there are no minimums, no reserves, and no seller bidding. The highest bidder will be the new owner! Auction Agent: Eugene Hochstetler 574-242-1100 Seller Name: Tarter Wood Highlight Pieces: Peterbuilt truck fleet, 5 late model wheel loaders, D6 Cat dozer, Late model Corley resaw, Iseli filing equipment in mint condition, Precision chipper in close to new condition. 01 Preview Information Day before auction or by appointment. Call Eugene 574-242-1100 Location of auction: 11346 US 127 Dunnville, KY 42528 02 Loadout Information Bright Star will staff loadout for Friday, Monday-Thursday of the following week. 03 Payment Information 6% KY Sales Tax-Semi trailer exempt. Payment terms: 10% Onsite Buyers Premium, 13% Buyers Online Premium. Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. 04 CAT 972M Wheel Loader 1:50 Scale Replica- Die Cast Metal Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot. https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s 96 Heavy Equipment Key Set 36 Keys Shipping available for $20 97 Manual Sealless Steel Strapping Tool Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30 98 Chipper Knife Dresser Series I, electric drive 99 Jockey Grinder Model: 06H, Milwaukee drill powered 99A Cedar by Juniper Tallying System* 1 phone reader, 1 scanner, 5 controllers, includes chargers 100 Morbark 640 Debarker Purchased new in 2006 (1st of an entirety) SN: 1060, stationary head, 50 hp electric hydraulic pak, hydraulic drive feed rolls, motor on head sells separate, no support structure, cutout box 100A Lincoln Electric Motor (Part of an entirety) 125 hp, 1785 rpm, 405T frame, WYE Delta starter, cutout box 101 Morbark Log Trough (Part of an entirety)2006 Model: 25-in, SN: 1060, web chain 13", one end lift, legs to first beam, hydraulic drive, 25' long 102 Morbark Log Trough (Part of an entirety) 2006 Model: 30-out, SN: 1060, 11" ladderback chain, hydraulic drive, 2 way kickers, no support structure, 30' 103 Morbark Operators Cab (Part of an entirety) 4'6" x 5', AC unit, all control valves for debarker, electric control boxes, no support past legs, no catwalk or stairs 104 Morbark Paddle Conveyor (Part of an entirety) 36" pan x 35', 13" sides, hydraulic drive 105 Morbark Paddle Conveyor (Part of an entirety) 36" pan x 40' elevated, hydraulic drive 106 Support Structure with Stairs and Catwalk for Debarker (Part of an entirety) 6" x 10" tube top rail, 6"x6" tubing post, 4"x4" tubing post for cab, stairs with railing 107 Morbark Debarker Entirety of Lots 100-106 With 10% raise 108 Morbark 3 Strand Log Deck 2006 11' x 24', stop'n'load, Tulsa winch gear box with hydraulic motor, gears are showing some wear, support to first beam or posts, catwalk on side 108A Morbark Log Bunks 87" x 128", Log catching bunks 108B Tulsa Winch Gearbox with Hydraulic Motor In good condition 109 Corley 3 HB LP Carriage (1st of an entirety) Installed new in 2000, 110 V over air controls, cant kickers, pantograph arm with support post, no controls, 16' x 10' overall 109A Lewis Scanner Controls for Carriage (Part of an entirety) 20' scanner bar, includes mounting beam, all controls in cab related to Lewis controls 110 Corley 56" Circular Husk (Part of an entirety) 56" saw, 42" topsaw, 24" x 6' live off bear belt, 21" belt, saw wrench, no power 111 Lincoln Electric Motor (Part of an entirety) 200 hp, 1785 rpm, 445T frame, 600 amp, 480 V fuse box 112 Baldor Solid State Soft Start (Part of an entirety) 200 hp 113 Corley Operators Cab (Part of an entirety) 11' x 54", no controls 114 Hydraulic Pack for Carriage Controls Berendsen Fluid Power (Part of an entirety) 20 hp electric, 15 gallon per min., 1800 psi, 60 gallon tank, electric cut out spill tray 115 Carriage Track and Frame (Part of an entirety) 54 1/2' center to center x 55', end stops, no support structure 116 Tyrone Berry Shotgun Feed Carriage Drive (Part of an entirety) 100 hp electric, directional valves, hydraulic lines to cylinder, electric cutout, drive cylinder with 42' travel, control valve in cab 116A WYE Delta Starter and Cutout (Part of an entirety) 100 hp, cutout box, used on carriage feed 117 Corley Mill Entirety of Lots 109-116 With 10% raise 118 Corley Bar Type Log Turner 5' bar, hydraulic drive, control valve in cab 119 Electric Hydraulic Pack 50 hp motor, 34" x 23" x 25" tank, line to valve and turner 120 Corley 3 Strand Log Deck 11' x 48' includes 4' nose skids, 13'8" overall width with side rail, electric drive, hydraulic stop'n'load 121 Dayton Dust Blower 18" blower, 8" inlet, 4" outlet, 5 hp electric drive 122 Slab Dump Belt 42" x 15', 30" x 13' belt, electric drive, air cylinder raise 123 Corley Cant Catcher Installed new in 2019! 11' long x 9'6" wide, 42" stroke on pusher, air cylinder drive, no support structure 124 Live Roll Case 40" x 60', 2 separate drives, electric drive, 6 1/2' x 30" rolls, no support past legs, trip switch 125 3 Strand Pop-Up Transfer 9' x 8'6", electric drive 126 Baren Gang Edger 4 blades 18", laser blazer, laser lites, 2 movable blades, 2 tailing belts (1-16" x 30', 1-6" x 30'), 75 hp electric, no support structure, 6" x 48" capacity 126A Edger Blades 18", 3" arbor, freshly sharpened, 28 blades 126B Saw Blades (2) 20' with 1" arbor, (2) 18" with 1" arbor 128 Corley 6' Line Bar Resaw (1st of an entirety) Installed new in 2019!! SN: 16477, 13" x 6' wheels, hydraulic strain, date: 1/16/2018, 2018 CBM12, 36' x 10" bands, 3" bands included, no support structure 128A Nema Electric Motor (Part of an entirety) 200 hp, 1190 rpm, 449T frame 129 Operator Cab with Lewis Control Center (Part of an entirety) All controls for resaw, steps and platform, AC unit, leg supports to first beam 130 Corley Line bar Feed (Part of an entirety) SN: 16477, date: 1/16/2018, 2018 LB41, side press roll with hydraulic drive, hydraulic feed rolls 131 Corley Cant Infeed (Part of an entirety) Pickup and placement roll case, side transfer chains, cant stops, hydraulic drive, 14' x 5'4" overall, 9" x 24" rolls 132 Corley Outfeed Board Separator (Part of an entirety) 7' x 20' overall, 9" x 36" rolls, lifting end roll, two way chain sorter, board and cant splitter, hydraulic drive 133 Hydraulic Pack for Resaw (Part of an entirety) 15 hp electric, valve bank, hoses to resaw, oil cooler, 27' x 47" x 15" tank 134 4 Strand Transfer (Part of an entirety) 11' x 10'9", 4' tipple arms, end shaft is connected to next deck but can be removed, no support to ground 135 Corley 180° Transfer (Part of an entirety) 4 strand, DF3500 chain, legs to first cross beam, 10'6' wide, 38' wide overall, electric drive, includes steps 136 Corley 4 Strand Transfer with Cant Turner (Part of an entirety) 12' x 14', cant stops, cant turner, electric drive, legs to first beam 137 Operators Cab with Controls (Part of an entirety) 5'x5', AC unit, Lewis controls for runaround and cant turner, legs to first beam 137A Hydraulic Pack for Resaw Line (Part of an entirety) 40 hp electric with 2 pumps, 25 hp electric with 2 pumps, oil cooler, 53 1/2' x 47 1/2" x 24" tank, mounted on spill tray 138 Square D Motor Control Center (Part of an entirety) 600 V, 800 amp, 8 sections, all motor controls for resaw line 139 Resaw and Runaround Entirety of Lots 128-138 With 10% raise 140 Corley 4 Strand Transfer Deck 9'6" x 24', cant stop, electric drive, 4 arm cant pickup 141 Belt Conveyor 35" x 21', 25' pan, 10" side, no support structure, electric drive 142 4 Strand Transfer Deck 11' x 28' flat plus 14' on slant, no legs or support structure, 4' tipple arms, no lift cylinder 143 Belt Conveyor 32" x 28', 25" pan, 24" belt, 42' tipple arms with skate rolls, electric drive, legs to first beam 144 Belt Conveyor 35' x 28', 25" pan, 24" belt, electric drive 145 4 Strand Transfer 11' x 13', H78B rooftop chain, with cant stop, electric drive, 11'10" wide overall, steps on side, no legs past first I beam 146 4 Strand Transfer 9'6" x 13', H78B rooftop chain, with cant stop, electric drive, air controls, no legs past first I beam 147 6 Strand Elevated Transfer Deck 12' x 11'6", only 3 strands have chain, electric drive, support to ground 148 Corley Drop Saw Trimmer New in 2018, 22' wide, 20' capacity, 10" x 34" board positioner rolls with end stop, 10 hp electric on saws, 26" blades, 8 strand feed chain, no sprockets on one end, small motor starter box 148A Trimsaw Blades New in 2018, 26" with 1 3/8' arbor, 21 blades, freshly sharpened 149 Grading Deck and Length Sorting Deck New in 2018, 12'6" x 20' with spiral end evener rolls, 6 strand transfer chain, length sorting switches, electric drive 150 Froedge 3 Strand Transfer Deck New in 2018, 9'6" x 17', electric drive 151 Froedge 6 Strand Elevated Deck New in 2018, 10'6" x 10', electric drive 152 Froedge Unscrambler 6 Strand with bars New in 2018, 12' x 13' tall, 3 sections of bars, phot eye sensor 153 4 Strand Transfer Deck New in 2018, 10' x 7', no support past first I beam, electric drive 154 4 Strand Transfer Deck New in 2018, 9'6' x 24', electric drive, H78B rooftop chain, steel decking, no support past first I beam 155 4 Strand Transfer Deck New in 2018, 10' x 20', H78B rooftop chain, no sprockets on one end, attached to 154, no support past first I beam, electric drive 156 6 Strand Waterfall Unscrambler New in 2018, 16' x 8' x 68" tall, 3 sections of bars, electric drive, no support structure 157 5 Strand Elevated Transfer Deck 17' wide overall, 10' long strands, drop down deck from trim saw, no drive, no shaft or sprockets on top end 158 4 Strand Green Chain 10' x 80', steel decking, electric drive 159 Lumber Carts 60" x 42' x 32" posts, straight steel wheels, 5 carts 160 Lumber Carts 60" x 42' x 32" posts, straight steel wheels, 5 carts 161 Lumber Carts 60" x 42' x 32" posts, straight steel wheels, 6 carts 162 5 Lumber Carts 60" x 48" x 32" posts, straight steel wheels 163 5 Lumber Carts 60" x 48" x 32" posts, straight steel wheels 164 4 Lumber Carts 60" x 48" x 32" posts, straight steel wheels 165 3 Lumber Carts (2) 60" x 41 x 32" posts, (1) 60" x 48" x 32" posts, straight steel wheels 166 1 Lumber Cart 6' x 4' x 2' posts, heavy built 166A Lumber Rack 50" x 8' with board stop 167 Self Dumping Hopper 54' x 60" x 32' 168 Self Dumping Hopper 6' x 5' x 40" 169 9 Lumber Carts 60" x 42" x 32" posts, (1) 48" wide, straight steel wheels 170 3 Strand Transfer Deck 9'6" x 21'6", heavy duty deck, electric drive 171 Precision Chipper (1st of an entirety) Model: 58-15, SN: C-3379, 6 knives, pipe adapter 172 Neidec Electric Motor (Part of an entirety) Includes WYE Delta Starter, cutout box, 150 hp, 1790 rpm, 445T frame 173 Precision Shaker Screen (Part of an entirety) Size: 8 x 6, SN: S-1719, electric drive 174 Chip Cyclone with Pipe (Part of an entirety) 4' cyclone, pipe to chipper 175 Precision Chipper Entirety of Lots 171-174 With 10% raise 176 Concave Belt Conveyor 41' x 52', 30" belt, electric drive 177 Harvest Handler Elevator 12' x 16', 6" pan, 5" paddles, electric drive 178 Webster Vibrating Conveyor Model: FSH, size: 24-33, 38' with chipper chute, 24" pan, 10" sides 179 Webster Vibrating Conveyor Model: F5H, 90' long 24" pan, 10" sides, size 24-33, electric drive 179A Precision Vibrating Conveyor 28" x 55', 18" pan, 8" sides, 7.5 hp electric drive 179B Precision Vibrating Conveyor Model: 20FT, SN: V2354, 30" x 30', 18" pan, 8" sides, electric drive 180 Barn Sweep Conveyor 47" x 50', elevated, 18" paddles, electric drive 181 Precision Chipper Completely rebuilt, SN: C-2996, Size 58-15, no pulley, 6 knives with knife jig 182 2018 Iseli RZI Auto Leveler/Tensioner New in 2018!! Model RZI, SN: 844211, computerized auto leveler, wooden work platform, in good condition 183 Iseli BNP 100 Auto Band Sharpener NEW IN 2018!! SN: 844221, computerized auto sharpener, dust collector unit, in good condition 184 Armstrong Back Clamp and Stands Adjustable height, 4 stands one has feed cylinder 185 Armstrong Stretcher Roll (1st of an entirety) #4, SN :56SR-133, electric drive 186 Armstrong Welding Clamp (Part of an entirety) Model 62, #16 welding clamp 187 Armstrong Hammering Bench with Anvil (Part of an entirety) 4" x 4' x 12" anvil, floor rolls, tools on bench 188 Armstrong Hammer Bench and Roller Entirety of Lots 185-187 With 10% raise 188A Armstrong Anvil 12" x 48" x 4" 189 Precision Tub Grinder Model 6K-440, SN: PAG945, 6 knife 20" capacity, 2 new extra stones, sump defoamer, electric drive 190 Simonds Chipper Knives and Bench (18) 19 1/2' new knives, (6) 19 1/2" used knives, 24" x 48" workbench, shelf with parts 191 Jet Drill and Mill Machine Model: JMD-18, SN: 1805552, set up to dress guides, carbide cutter, vacuum dust collector, 192 M+J Guide Dressing Machine Sliding block holder, electric drive 193 Shelf with Guide Blocks 1 1/2' x 13" guide blocks, some new, contents of 2 shelves 194 Armstrong Swage and Shaper on Cart #6900 shaper, Hanchett #54/55 swage air powered, 24" x 48' cart, contents of cart, parts for swage, new grinding wheels 195 Steel Work Table on Casters 42' x 33', 1/2" steel top 196 Belt Sander and Vise on Cart 36" x 23' steel cart, 1" x 30" belt-5" disc sander, 5" vise 197 Simonds 56' Circle Saw Blade F style, new carbide teeth installed, good saw 198 Simonds 56' Circle Saw Blade F style, new carbide teeth installed, good saw 199 Simonds 56' Circle Saw Blade F style, new carbide teeth installed, good saw 200 Simonds 56' Circle Saw Blade F style, new carbide teeth installed, good saw 201 Simonds 56' Circle Saw Blade F style, new carbide teeth installed, good saw 202 Simonds 56' Circle Saw Blade F style, new carbide teeth installed, good saw 203 Simonds 56' Circle Saw Blade F style, new carbide teeth installed, good saw 204 42' Blade for Topsaw 42", P style, 2" arbor, new carbide teeth installed 205 Hanchett 408 L.H. Bandsaw Grinder SN: 75, wheel size 10 x 5/8 x 5/8, band holding stands, some tools, extra wheels 206 Armstrong Roller and Bench #2, SN: 13180, 6 1/2" x 36' x 1 3/4" anvil, tools, bottom rolls 207 Hanchett Air Swage Model: 54/55 208 Hanchett Grinder and Shelf with Parts Model: 06H grinder with Milwaukee drill, was rebuilt, new grinder wheel, 1 box of pipers carbide teeth, lots of Jockey grinder parts, 48" x 24' x 7' shelf, 6 box of lumber crayons 209 New Simonds Dominator Carbide Teeth BF 8/9 9/32, 5 box 100 per box, plus part box 210 Simonds Stand-All Sawbits BF 8/9 9/32, stand-all BT, 5 new boxes, 1 part, 1 box regular bits 211 Simonds Shanks F 8 ga. Regular 3rd, 3 new boxes, 1 box 2nd, several part boxes 212 Marking Paint 33 cans green, 8 cans orange 213 Circular Saw Stand Steel rack, 4 slots, saw working stand 214 Bolt Bin with Parts 34" x 48' x 12" deep, 2 tier bins, all controls 215 Air Nailers and Storage Cabinet 51' x 66" x 28" deep cabinet with 2 doors and shelves, Bostitch nailers, some staples, all parts in cabinet 216 Seat for Operators Cab On pedestal, new seat 217 Bio Lube #2 2 new barrels, lube for bandsaw 217A Pallet Jack 218 Sawmaster 32W Oil 1 part barrel, 1 empty barrel, 2 pumps 219 Poly Saw Guard 1 new part roll, lots of used 220 Misc. Lot Towel dispenser, air hose, water hose, sprayer, chair, porter cable vacuum, 22" portable fan, broom, shovel 221 Torch Set with Tanks Gauges and torches 222 1993 Atlas Copco Air Compressor Model: GA45, SN: HOLO21037, Screw type compressor, duct work to outside, cut out box, no air lines, 60 hp electric motor 223 Electric Motor for Compressor Fits lot 222, new motor 60 hp 224 Ingersoll Rand Air Compressor Model: SSR-EP50SE, SN: G1017U92291, 198CFM, 50 hp electric motor, no air lines 224A Vertical Air Tank 4' x 12', relief valve 224B Air Lines All air lines going to equipment not lotted with equipment, lots of 2 1/2' pipe 224C Support Structure under Corley Mill 3/8" x 6" x 8' I beams plus braces, catwalk behind mill, no electrical or air lines 224D Support Structure under Resaw and Runaround Support structure and catwalk around resaw and runaround, no electrical or air lines, no control valves 224E Support Structure under Decks and Catwalk No electrical or air lines as marked, structural steel and catwalk, stairs, from log deck to mill to deck going to trimsaw on front side of mill, catwalk beside trimsaw 224F Structural Steel From break down line to trimsaw as marked, no air lines or electrical 224G Electric Wires and Conduit in Building Electric wires from main to cutout box to equipment, includes conduit but no boxes as marked, does not include 110 V pertaining to building 225 Ingersoll Rand Air Dryer Pipe as marked 226 Ingersoll Rand Air Compressor Model: SSR-EP25SE, SN: KE3147U96109, 95CFM, 25 hp electric motor, working condition 227 Van-Air Air Dryer No air lines, Twin tank, electric controls 228 Select Sawmill Bandsaw (1st of an entirety) 4" x 36" wheels, 32" wide opening, 4 post head frame, hydraulic carriage drive, double cut mill, computerized control station, 20 hp electric hydraulic unit, 75 hp electric on saw, 229 2 Strand Log Deck with Stop'N'Load (Part of an entirety) Model: 4221D, SN: 28510500X115RS78, 6' x 13', 46" loading arms, hydraulic drive 230 3 Strand Transfer Deck (Part of an entirety) 8' x 12' plus 4' drop section, electric drive 231 Morgan Board Edger (Part of an entirety) 5" x 30" capacity, 26" x 44" infeed belt, 1 moving saw, 14' split saw blades, 26' x 44" outfeed belt, 30 hp electric motor, can be portable 232 Dust Conveyor (Part of an entirety) 11" x 14'6", 6" pan, 8' sides, electric drive 233 Dust Conveyor (Part of an entirety) 15" x 10', 9" pan, 7 1/2" paddles, 4" sides, chain type conveyor 233A Dust Conveyor 18" x 24', 11" pan, with slide pan, electric drive 234 Bandsaw Blades (Part of an entirety) 4" x 21' Double Cut bandsaw blades, 146 tooth, 11 pieces 235 3 Lumber Racks (Part of an entirety) 8' x 4', 36" tall, board stop, slab rack 4' x 4', metal stand 4' x 20" 236 Banding Tools and Hand Tools (Part of an entirety)Shovels, sledge hammer, axe, digging bar, banding tools, steel banding, dust rake, cant hook, bolt cutter 237 Delta 10" Power Miter Saw (Part of an entirety) 238 Porter Cable Air Compressor (Part of an entirety)150 max psi, 24 gallon tank 239 All Electrical to Mill (Part of an entirety) Cutout boxes, motor starters 240 Entirety of Lots 228-239 With 10% raise 241 JD Turbo Power Unit Model: 4045 TF275, SN: PE4045J004385, clutch, mount to be used on select bandsaw mill, in good condition 255A Wheel Loader Forks 8 x 48" forks, 62" wide overall, quick attach 242 Corley 10 Head Drop Trimmer* SN: DST-021, 9' x 24' overall, 7.5 hp electric motor on each head, 24" blades, air valves and cylinders. Contact Myron Nissley with any questions 574-536-2481 243 Cant Tipple with Frame* 16' long, 4' x 19' overall, air cylinder. Contact Myron Nissley with any questions 574-536-2481 256A Wheel Loader Forks 8 x 48" forks, 62" wide overall, quick attach 244 2013 Wood-Mizer LT-70 Portable Sawmill* VIN: 456D72419DNBB5906, meter reads, 10297 hours, does not have the trailer package, 30 hp electric motor-230/460 volt, 1 x 24" band wheels, includes 18 used 1 1/2" bands, 32" 8' landing table, Debarker attachment, log loading arm, has computerized setworks with joystick controls, includes trailer hitch but no axle. Good running machine. Contact Myron Nissley with any questions 574-536-2481 244A Yanmar Diesel Engine* Model: 3TNM74F-SAWM, SN: 006189, includes fuel tank, was used on Wood-Mizer EG200 edger. Contact Myron Nissley with any questions 574-536-2481 257A Wheel Loader Forks 6 x 52" forks, 62" wide overall, quick attach 245 Ingersoll-Rand T30 Air Compressor* Model: 234OL5, SN: 30T923383, 5 hp electric motor, 60 gallon vertical air tank 246 2-Strand Log Deck with Stop'n'Load* 80" x 22', 3' loading arms, hydraulic cylinders onloading arm, electric drive. Contact Myron Nissley with any questions 574-536-2481 258A Wheel Loader Forks 6 x 52" forks, 62" wide overall, quick attach 247 WMMA 2-Blade Edger* Shop # 66B21, 6 x 36" capacity, (2) 16" blades, 1 moveable, 30 hp electric motor, 42" x 92" dead roll table outfeed, 42 x 90" dead roll infeed. Contact Myron Nissley with any questions 574-536-2481 248 Belt Conveyor* No drive, 6 1/2" belt, 8" pan, 4 1/2" sides, 12" x 28' 259A Wheel Loader Forks Quick attach, used on Volvo L60F, 6 x 54" forks, 50" wide 249 Self Dumping Hopper* 56 x 80 x 52" deep 249A Self Dumping Hopper* 60 x 65 x 48" deep 260A Volvo Loader Forks SN: 26130003, Quick attach, 8 x 48" forks, 62' wide overall 249B Self Dumping Hopper* 60 x 65 x 48" deep 249C Self Dumping Hopper* 60 x 65 x 48" deep 250 Toyota Forklift* Model: 8FDU30, SN: 10689, 5670 lb capacity, 21027 hours, has side shift, enclosed cab with fan and heater, needs 1 new door, diesel powered, 6.5-10 tires on rear, 28x9-15 tires on front, solid tires, 6 x 60" forks, 3 stage mast-90" tall. Good, running machine. 252 Toyota Electric Tow Truck* Model: 7TB50-69209E, battery powered, includes charger, 24V 253 Toyota Electric Tow Truck* Model: 8TB50-36074, 710 lb. maximum couples weight, battery powered, 24 V, includes charger 254 Toyota Electric Tow Truck* SN: MVE00147504, model: 85P-13, 24 V battery, includes charger 255 2015 Cat 930M Wheel Loader SN: CAT0930MLKTG00541 Meter reads: 16,834 hours Engine: Cat C7.1 140kw (SN: D8T05363) Fuel type: Diesel ROPS: Enclosed 3rd Valve: No Center to center of pins: 25" Tire Size: 20.5R25 Attachments: 8 x 48" forks, 62" wide overall Heater: Yes A/C: Yes Quick Attach: Yes Features and Notes: Good running machine! Electronic display. 256 2015 Cat 930K Wheel Loader SN: CAT0930KHRHN03883 Meter reads: 19,857 hours Engine: Cat C7.1 Acert 152 hp Fuel type: Diesel ROPS: Fully enclosed 3rd Valve: No Center to center of pins: 25" Lift capacity: 28,948 lb. operating weight Tire Size: 20.5R25 Attachments: 8 x 48" forks, 62" wide overall Heater: Yes A/C: Yes Quick Attach: Yes Features and Notes: Good running machine! 257 2021 Volvo L60H Wheel Loader SN: VCEOL60HT0S622231 Meter reads: 3,096 hours Engine: Volvo D6J-131 hp (SN: 1246061) Fuel type: Diesel ROPS: Fully enclosed 3rd Valve: Yes Center to center of pins: 19" Tire Size: 20.5R25 Attachments: 6 x 52" forks, 62" wide overall Heater: Yes A/C: Yes Quick Attach: Yes Features and Notes: Great running machine! Backup camera, pilot joystick controls 258 2020 Volvo L60H Wheel Loader SN: VCEOL60HA0S622092 Meter reads: 2,692 hours Engine: Volvo D6J-131 hp (SN: 12394366) Fuel type: Diesel ROPS: Enclosed 3rd Valve: Yes Center to center of pins: 19" Tire Size: 20.5R25 Attachments: 6 x 52" forks, 62" wide overall Heater: Yes A/C: Yes Quick Attach: Yes Features and Notes: Good running machine! 268 Case 580 Super M Backhoe SN: JJG0284708, meter reads: 7,310 hours, 19.5-24 tires on rear, 13-16.5 tires on front, CNH 4 cylinder diesel engine rated at 95 hp, 30 x 82" front end bucket, 2' wide x 3' deep 5 tooth backhoe bucket. Good running machine. Photo available online 259 Volvo L60F Wheel Loader SN: VCE0L60FK00061851 Meter reads: 34,615 hours Engine: Volvo D6E-126 hp Fuel type: Diesel ROPS: Enclosed 3rd Valve: No Center to center of pins: 19" Tire Size: 20.5R25 Attachments: 6 x 54" forks, 50" wide overall Heater: Yes A/C: Yes Quick Attach: yes Features and Notes: Good running machine! Photo available online 260 Volvo L50B Wheel Loader SN: L50BP9839 Meter reads: 32,764 hours Engine: Volvo (SN: AB80644NT749463) rebuilt on 12/2014 Fuel type: Diesel ROPS: Enclosed 3rd Valve: No Center to center of pins: 17 1/2" Tire Size: 17.5 R25 Attachments: 8 x 48" forks, 62' wide overall Heater: Yes A/C: Yes Quick Attach: Yes Features and Notes: Runs and operates well 260A 1985 John Deere 544C Wheel Loader SN: DW544CD507622 Engine: 6 cylinder 414T, turbo charged Fuel type: Diesel ROPS: Yes, fully enclosed 3rd Valve: No 3rd valve Tire Size: 17.5-25 Attachments: 104" bucket, 4' x 6" x 2" forks (one fork is stationary) Heater: No A/C: No Quick Attach: No Features and Notes: fuel gauge is broken, machine occasionally spits radiator fluid out of over flow when decelerating from a high rpm. comes with extra 17.5-25 tire and rim, engine runs strong, operates the way it should. Contact Myron Nissley with any questions 574-536-2481. 261 Case W14C Wheel Loader SN: JAK0030258 Meter reads: 26,302 hours Engine: 5.9 Cummins Fuel type: Diesel ROPS: Enclosed 3rd Valve: No Center to center of pins: 25" Lift capacity: Unknown Tire Size: 17.5R25 Attachments: Pin through forks, 4 x 48" forks, 5' wide Heater: No A/C: No Quick Attach: No Features and Notes: Runs and operates as it should 264 1985 Case W11B Wheel Loader SN: JAK0017289 Meter reads: 1,438 hours Engine: Case Fuel type: Diesel ROPS: Enclosed, needs new door 3rd Valve: Yes Tire Size: 15-19.5 Attachments: 6 x 42" forks, 58" wide Heater: No A/C: No Quick Attach: Yes Features and Notes: Has master disconnect switch. Runs and operates as it should. 264A Case 455C Track Loader SN: GBE0004375, meter reads: 3,718 hours, 14' tracks, Case diesel engine, 5 x 40" forks, 52" wide overall, pin through style forks, open cab. Runs and operates well 264B Wheel Loader Bucket Used on Volvo L50B, quick attach, 3' x 88" 264C Wheel Loader Bucket* Quick attach, 102" wide x 54" deep x 6' high 264D Wheel Loader Bucket* Quick attach, 4' x 104" x 5' tall 264E Wheel Loader Bucket* Quick attach, 38" x 8' x 42" tall 264F Sawdust Bucket* Quick attach, 4' x 8' x 4' tall 264G Wheel Loader Forks* Quick attach, 5 x 50" forks, 50" wide 264H Jib Crane for Loader* Fork pockets, 14' long, 9 x 38" plate on end, has tie-back chains 264I Push Blade* Quick attach, 18" x 10' 264J Snow Blade* Quick attach, 10' wide 265 2014 Cat D6N XL Dozer SN: PER00487 Meter reads: 6,729 hours Engine: Cat C6.6 Acert (SN: C8N13757) Fuel type: Diesel HP: 175 hp Blade: 10'6" 6-way ROPS: Enclosed A/C: Yes Heater: Yes Features and Notes: 24" tracks, high track 266 2017 Case 850M WT Dozer SN: JJGN850MEGC103124 Meter reads: 5,493 hours Engine: Case 4.5L Fuel type: Diesel Blade: 112" 6-way ROPS: Enclosed A/C: Yes Heater: Yes Features and Notes: 20" tracks, tracks are in good condition, Allied H4A winch with 3/4" cable, 20201 lb operating weight, good running machine 267 2004 Volvo EC160BLC Excavator SN: EC160V10370 Meter reads: 11,645 hours Engine: Volvo D6D-EBE2-120HP (SN: 00915808) Fuel type: Diesel Bucket: 3' Geith tooth bucket Hydraulic thumb: Yes Heater: Yes A/C: Yes Features and Notes: 24" tracks, fully enclosed cab, starts right up and operates well. 267A Excavator Bucket* 64" wide, 42" deep, single blade, 19" center to center on pins 302 Great Dane Flatbed Trailer VIN: 1GRDM96204M702293, GVWR: 80000 lb., 295/75R22.5 tires, steel rims, 102" x 48'. Includes sliding straps, spare tire, and storage for cribbage blocks. Road ready 267B Quest Excavator Bucket* 2' wide x 40" deep, 5 teeth, 19" center to center of pins 270 2017 International LT625 6x4 Semi Truck VIN: 3HSDZAPR6JN401277 Meter reads: 747,719 miles Engine: Cummins X15-450 hp Transmission: Automatic GVWR: 53,200 lb Front axle rating: 13,200 lb Rear axle rating: 20,000 lb/axle Heat/AC:Yes Wet kit: No Features and Notes: 64" sleeper, 275/80R22.5 tires, aluminum brush guard. Great running truck. 271 2016 Peterbilt 589 Semi Truck VIN: 1XPBD49X7GD354118 Meter reads: 771,242 miles Engine: Cummins ISX15 450 hp Transmission: Automatic GVWR: 53,200 lb Front axle rating: 13,200 lb Rear axle rating: 20,000 lb/axle Heat/AC: Yes Wet kit: No Features and Notes: 275/80R22.5 tires, 64' sleeper, aluminum brush guard. Very nice, great running truck. 272 2016 Peterbilt 589 Semi Truck VIN: 1XPBD49X9GD354122 Meter reads: 724,126 miles Engine: Cummins X15-450 hp Transmission: Automatic GVWR: 53,200 lb Front axle rating: 13,200 lb. Rear axle rating: 20,000 lb/axle Heat/AC: Yes Wet kit: No Features and Notes: 275/80R22.5 tires, 64" sleeper, aluminum brush guard. Great running truck. 273 2016 Peterbilt 589 Semi Truck VIN: 1XPBD49X7GD354121 Meter reads: 766,490 miles Engine: Cummins X15-450 hp Transmission: Automatic GVWR: 53,200 lb Front axle rating: 13,200 lb. Rear axle rating: 20,000 lb/axle Heat/AC: Yes Wet kit: No Features and Notes: 275/80R22.5 tires, 64" sleeper, aluminum brush guard. Very nice running truck. 274 2016 Peterbilt 589 Semi Truck VIN: 1XPBD49XXGD354114 Meter reads: 603,640 miles Engine: Cummins X15-450 hp Transmission: Automatic GVWR: 53,200 lb Front axle rating: 13,200 lb. Rear axle rating: 20,000 lb/axle Heat/AC: Yes Wet kit: No Features and Notes: 275/80R22.5 tires, 64" sleeper, aluminum brush guard. Great running truck. 275 2016 Peterbilt 589 Semi Truck VIN: 1XPBD49X9GD354119 Meter reads: 672,886 miles Engine: Cummins X15-450 hp Transmission: Automatic GVWR: 53,200 lb Front axle rating: 13,200 lb Rear axle rating: 20,000 lb/axle Heat/AC: yes Wet kit: No Features and Notes: 275/80R22.5 tires, aluminum brush guard, 64" sleeper. Great running truck! 276 2016 Peterbilt 589 Semi Truck VIN: 1XPBD49X5GD354117 Meter reads: 935,443 miles Engine: Cummins X15 Transmission: Automatic GVWR: 53,200 lb Front axle rating: 13,200 lb. Rear axle rating: 20,000 lb/axle Heat/AC: Yes Wet kit: No Features and Notes: 275/80R22.5 tires, 64" sleeper, aluminum brush guard. Great running truck. 280 1995 International 9400 6x4 Semi Truck VIN: 2HSFHASRXSC022630 Meter reads: 917,895 miles Engine: Cat 3406 Transmission: Spicer 10 speed GVWR: 52,000 lb Front axle rating: 12,000 Rear axle rating: 20,000 Heat/AC: Yes Wet kit: No Features and Notes: 48" sleeper, 11R22.5 tires. Good running truck. Photo available online 281 1997 Ford Dump Truck VIN: 1FDZU90X1VVA12743 Meter reads: 89,883 miles Engine: Cat 3406 Transmission: 8 speed Eaton GVWR: 58,000 lb Front axle rating: 18,000 lb Rear axle rating: 20,000 lb Heat/AC: yes Wet kit: No Features and Notes: Tri-axle, 425/65R22.5 tires on front, 275/80R22.5 tires on rear. 8' x 18' x 5' deep bed. Good running truck. Photo available online 282 1999 International 5000 Dump Truck VIN: 1HTTGAHT4XJ002578 Meter reads: 484,280 miles Engine: Cummins MII Plus Transmission: 9 speed Eaton Heat/AC: Yes Wet kit: No Features and Notes: 425/65R22.5 tires on front, 2 axles, 11R22.5 on rear 2, tri-axle. 8' x 16' x 6' tall bed. Good running truck. Photo available online 283 1999 International 4700 4x2 Flatbed Truck* VIN: 1HTSCAAL7XH692903 Meter reads: 579,402 miles Engine: DT 466E Transmission: International 6 Plus Heat/AC: Yes Wet kit: No Features and Notes: 254" WB, 11R22.5 tires, 8' x 26'6" flatbed with 52" tall guard behind cab, toolboxes mounted under bed. Good, clean running truck. 284 1996 International 4700 4x2 Flatbed Truck* VIN: 1HTSCAAMXTH350932 Meter reads: 85,817 miles Engine: DT 466E Transmission: Eaton 6 speed GVWR: 25,500 lb. Front axle rating: 8,000 lb Rear axle rating: 17,500 lb Heat/AC: Yes Wet kit: No Features and Notes: 254" WB, 8' x 24'6" flatbed with 56" tall guard behind cab, 11R22.5 tires. Good, running truck 285 1978 Ford 9000 Semi Truck* VIN: U91PVCF4183 Meter reads: 580,411 miles Engine: Cummins TC-350 rated at 350 hp Transmission: Fuller Roadranger 10 speed GVWR: Approx. 45,000 lb Heat/AC: No Wet kit: No Features and Notes: 295/75R22.5 tires, needs new battery, other than that runs good. 286 2005 International 4300 SBA 4x2 Semi Truck VIN: 1HTMMAN55H126226 Meter reads: 387,962 miles Engine: DT 466 Transmission: 8 speed Eaton Fuller GVWR: 33,000 lb Front axle rating: 12,000 lb Rear axle rating: 21,000 lb Wet kit: No Features and Notes: 690" WB, 8' x 26'6" flatbed, boxes under bed, 295/75R22.5 rear tires, 275/80R22.5 front tires. Good, running truck. 287 2005 International 4400 6x4 Straight Truck VIN: 1HTMSAAR85J005059 Meter reads: 399,811 miles Engine: DT 466 Transmission: 10 speed Eaton Fuller GVWR: 52,350 lb Front axle rating: 12,350 lb Rear axle rating: 20,000 lb Heat/AC: Yes Wet kit: No Features and Notes: 256" WB, tandem axle, 8' x 28' flatbed, 11R22.5 tires, sliding straps, toobox under bed. Good, running truck. 288 1999 International 4900 Straight Truck* VIN: 1HTSDAAM5XH679816 Engine: DT466E Transmission: 6 speed Eaton Fuller Meter reads: 275,231 miles GVWR: 25,500 lbs. GAWR front: 8,000 lbs. GAWR rear: 17,500 lbs. Features and notes: Has heat/AC, 8' x 26' flatbed, non CDL, good running truck 292 2000 Sterling Log Truck VIN: 2F2XKWEBOYAF35650 Meter reads: not available Engine: Cat C-12 Transmission: 8 speed Roadranger Front axle rating: 18,000 lb Rear axle rating: 20,000 lb/axle GVWR: 58,000 lb Heat/AC: Yes Double frame: Yes Features and Notes: 11R22.5 tires on rear, 385/65R22.5 steer tires, 8' x 20' bed, 90" x 7' tall bunks. Good running truck. Photo available online 293 2003 International 5600i 6x4 Log Truck VIN: 1HTXHAPT83J081621 Meter reads: 482,080 miles Engine: Cummins X15-450 hp Transmission: 8 speed Eaton Log loader: None GVWR: Approx. 50,000 lb Heat/AC: Yes Full lock in rears: No Double frame: Yes Features and Notes: 11R22.5 tires, 8' x 17' bed, 7' x 6' tall bunks. Good running truck. Photo available online 294 1997 Ford LTL 9000 Log Truck VIN: 1FDZA90W6VVA28176 Meter reads: 962,444 miles Engine: Cat Transmission: 10 speed Eaton Log loader: None Suspension: Hendrickson Front axle rating: 14,060 lb Rear axle rating: 23,000 lb GVWR: 60,000 lb Heat/AC: Yes Full lock in rears: No Double frame: Yes Features and Notes: 8'4" x 19' bed, 92" wide x 70" tall bunks, 11R22.5 tires. Good running truck. Photo available online 295 1986 Ford LTL 9000 Log Truck VIN: 1FDYA92W6GVA31865 Meter reads: 591,865 miles Engine: Cummins NTC-350 Transmission: 8 speed Eaton Log loader: None Suspension: Hendrickson GVWR: 50,000 lb Heat/AC: No Full lock in rears: No Double frame: Yes Features and Notes: 11R22.5 tires, 8' x 20' log bed, 82" tall x 88" wide bunks. Runs good. Photo available online 296 2000 Sterling Log Truck VIN: 2FZXKWEB1YAF34085 Meter reads: 556,656 miles Engine: Cat C-12 Transmission: Roadranger 8 speed Log loader: None Suspension: Spring Leaf Front axle rating: 18,000 lb Rear axle rating: 20,000 lb/axle GVWR: 58,000 lb Full lock in rears: No Double frame: Yes Features and Notes: 80' x 20' log bed, 7' x 7' log bunks, 425/65R22.5 tires on front, 11R22.5 tires on rear. Starts and runs good. 297 1996 Ford L9000 Log Truck VIN: 1FDZU90T7TVA11476 Meter reads: 556,296 miles Engine: Cat 3306 Transmission: Eaton Fuller 8 speed Log loader: None Suspension: Leaf Spring Front axle rating: 16,000 lb Rear axle rating: 20,000/axle GVWR: 56,000 lb Heat/AC: No Full lock in rears: No Double frame: No Features and Notes: 11R22.5 tires on rear, 385/65R22.5 on front, 8' x 20' flatbed with log bunks, 89" wide x 82" tall bunks. Starts and runs strong! 298 1996 Ford L9000 Log Truck VIN: 1FDZY90X7TVA13798 Meter reads: 119,419 miles Engine: Cat 3406 350hp (SN: 8PN06836) Transmission: Eaton Fuller 8 speed Log loader: None Suspension: Leaf Spring Front axle rating: 18,000 lb. Rear axle rating: 20,000/axle GVWR: 58,000 lb Heat/AC: No Full lock in rears: No Triple frame: Yes Features and Notes: 8' x 19' log bed, 7' x 7' log bunks, has pintle hitch and trailer brakes for pup trailer, 385/65R22.5 tires on front, 11R22.5 tires on rear axles. Starts and runs good. 298A Log Bed for Truck* 98" x 17' long, bunks are 7' wide x 80" tall 299 1994 Ford L9000 Water Truck VIN: 1FDZU90L2RVA52767 Meter reads: 361,702 miles Engine: Cummins L10 280hp Transmission: 8 speed manual GVWR: 64,000 lb Front axle rating: 18,540 lb Rear axle rating: 46,000 lb Heat/AC: No Wet kit: No Features and Notes: 246" WB, air brakes, 64" x 12' tank, multi quip 3" trash pump powered by Honda GX240 motor, includes hoses, pump works well, 11R22.5 tires on rear, 385/65R22.5 steer tires, good running truck 299A 2007 Chevrolet C4500 Work Truck* VIN: 1GBE4C1257F403401, GVWR: 17500 lbs., meter reads: 386000 miles, 2WD, Duramax diesel, automatic transmission, single cab, has heat/AC, 8' x 12'6" flatbed with 2" hitch receiver, gooseneck hitch, (2) 20" x 6' aluminum toolboxes, spare tire, 225/70R19.5 tires, approx. 150000 miles on LB2 Duramax, approx. 20000 miles on new Jasper transmission, full service done within month of auction, new gooseneck plate and ball. Good running truck. Contact Myron Nissley with any questions 574-536-2481 300 2004 Great Dane Flatbed Trailer VIN: 1GRDM96284M702199, 8' x 48', 295/75R22.5 tires, includes sliding straps and box for cribbage blocks 301 2004 Great Dane Flatbed Trailer VIN: 1GRDM96264M702315, 8' x 48', 295/75R22.5 tires, sliding straps, cribbage block box 302 2001 Transcraft Flatbed Trailer* VIN: 1TTF4820X12007610, 8' x 48', 4' tall guard on front, includes all sliding straps, 285/75R24.5 tires, toolbox under deck 303 2005 Fontaine Flatbed Trailer with Log Bunks* 88" x 55" tall bunks, 6 bunks, includes sliding straps, spare tire, 295/75R22.5 tires, under deck box for cribbage blocks 303A 1998 Fruehauf Flatbed Trailer* VIN: 1JJF482F7WS487538, GVWR: 100000 lb, 101" x 48', 295/75R22.5 tires, includes sliding straps, toolboxes under deck 303B 2004 Great Dane Flatbed Trailer* VIN: 1GRDM96264M702282, GVWR: approx. 80000 lb, 101" x 48', 295/75R22.5 tires, includes all sliding straps, spare tire, box for cribbage blocks under deck 303C 2004 Great Dane Flatbed Trailer* VIN: 1GRDM96204M702293, GVWR: approx. 80000 lb, 101" x 48', 295/75R22.5 tires, includes sliding straps, spare tire, storage box for cribbage blocks under deck 303D 2000 Fontaine Step-Deck Trailer* VIN: 13N24830XY5994335, 100" X 10' upper deck, 22" drop, 38' main deck, 48' long overall, GVWR: approx 80000 lb., 255/70R22.5 tires, includes sliding straps, box for cribbage blocks under deck 303E 2004 Great Dane Flatbed Trailer* VIN: 1GRDM96205M701064, GVWR: 71000 lb, 101" x 48', 295/75R22.5 tires, includes sliding straps and storage for cribbage blocks under deck 303F 1992 Oshkosh Flatbed Trailer* VIN: 4MLP24828NB615001, GVWR: 80000 lb., 101" x 48', 295/75R22.5 tires, includes sliding straps, spare tires, storage for cribbage blocks under deck 303G 2006 Fontaine Drop-Deck Trailer* VIN: 13N25330863538309, 101" X 10' top deck, 43' main deck, 53' long overall, 255/70R22.5 tires, sliding straps, toolbox and cribbage block storage under deck 303H 2009 Fontaine Drop-Deck Trailer* VIN: 13N24820391549994, 101" X 48', 10' top deck, 38' main deck, 48' overall, GVWR: 69278 lbs., 255/70R22.5 tires 304 1987 Fontaine Lo-Boy Trailer* SN: 9916, 9'7" x 23'6" main deck, 30" x 9' ramps, 35' long overall, 245/70R17.5 tires 305 2005 Peerless Open Top Chip Trailer VIN: 1PLE045275PK54209, 45' long, 11R22.5 tires, 92" inside width, 98" inside height 306 2006 Peerless Open Top Chip Trailer VIN: 1PLE045215PG54871, 45' long, GVWR: 65,000 lb., 275/80R22.5 tires, 92" inside width, 98" inside height, has a spare tire 307 2012 Peerless Open Top Chip Trailer VIN: 1PLEO4525CPF57427, 45' long, GVWR: 65,000 lb., 295/75R22.5 tires, 92" inside width, 98" inside height, has spare tire 308 2005 Peerless Open Top Chip Trailer VIN: 1PLE045225PE54467, 45' long, 275/80R22.5 tires, 92" inside width, 98" inside height, GVWR: 65,000 lb., has spare tire 309 2009 Peerless Open Top Chip VIN: 1PLEO45239PF56284, 45' long, GVWR: 65,000 lb, 11R22.5 tires, 92" inside width, 98" inside height, has spare tire 310 2005 Peerless Open Top Chip Trailer VIN: 1PLE045255PK54208, 45' long, GVWR: 65,000 lb., 275/80R22.5 tires, 90" inside width, 98" inside height, has spare tire 311 2012 Peerless Open Top Chip Trailer VIN: 1PLEO4523CPF57426, 45' long, GVWR: 65,000 lb., 275/80R22.5 tires, 92" inside width, 98" inside height, has spare tire 312 1990 Fruehauf Van Trailer* VIN: 1H5V05320LM044569, GVWR: 68000 lb., 53' long, 295/75R22.5 tires, 99" inside width, 110" inside height 313 2005 Peerless Open Top Chip Trailer* VIN: 1PLE045245PE54468, GVWR: 65000 lb., 45' long, 275/80R22.5 tires, 91" inside width, 98" inside height 314 1997 Trailmobile Van Trailer* VIN: 1PTOIJAH7V6003294, GVWR: 65000 lb., 53' long, 11R22.5 tires, 99" inside width, 110" inside height 315 1997 Trailmobile Van Trailer* VIN: 1PTOIJAH7V6003330, GVWR: 65000 lb., 53' long, 295/75R22.5 tires, 99" inside width, 110" inside height 316 1974 Fruehauf Van Trailer* VIN: CHS193313, 48' long, 295/75R22.5 tires 317 1969 Fruehauf Van Trailer* VIN: MAK202601, 40' long, 11R22.5 tires, 92" inside width, 98" inside height, includes tires and rims in trailer 318 1998 Great Dane Van Trailer* VIN: 1GRAA0621WB181008, GVWR: 65000 lb., 53' long, 295/75R22.5 tires, 99" inside width, 108" inside height, includes all contents, tires, engine parts, hoses, filters, trailer and truck parts, etc. 318A 1988 Fruehauf Van Trailer* VIN: 1H2V05320JE003976, GVWR: 68000 lb., 53' long, 295/75R22.5 tires, 100" inside width, 109" inside height 319 2000 Hyundai Van Trailer* VIN: 3H3V532C4YT092019, GVWR: 65000 lb, 53' long, has spare tire, 295/75R22.5 tires, 99" inside width, 110" inside height 319A 2000 Hyundai Van Trailer* VIN: 3H3V532C6YT091003, GVWR: 65000 lb., 53' long, 275/80R22.5 tires, 99" inside width, 110" inside height 319B 1984 Fruehauf Van Open Top Trailer* VIN: FD9205, GVWR: 67200 lb., 40' long, 295/75R22.5 tires, 96" inside width, 7' inside height, includes all pallets in trailer, some good-some broken, includes spare tire 320 Log "Pup" Trailer 25' long, 90" wide x 60" tall bunks, pintle hitch, air brakes, 255/70R22.5 tires. Photo available online 321 Log "Pup" Trailer 93" x 60" tall bunks, 25' long, 102" x 54" dovetail, pintle hitch wit air brakes, 255/70R22.5 tires. Photo available online 322 1988 Trailmobile Log Trailer* VIN: 1PTF71TJ2J9002832, GVWR: 65000 lb. GAWR: 20000 lb., 6 bunk, 40' long, includes all straps, 275/80R22.5 tires, bunks are 91" x 5' tall 329 2017 Chevrolet Silverado 1500 Pickup Truck* VIN: 1GCVKPEC7HZ129842, GVWR: 7200 lb, 4WD, 269558 miles, Bluetooth radio, electronic display, double cab, 7' bed, automatic transmission, 5.3L Vortec engine. Good, running truck. 330 2000 Chevy K2500 Service Truck VIN: 1GBGK24R6YR221496 Meter reads: 191,404 miles Engine: 5.3L Vortec gas engine Transmission: Automatic Features and Notes: 80" x 8' service bed with fluids, hand tools, fittings, parts, welding rods, overhead rack, cutting torch with tanks and leads. Miller Bobcat 225T 8000 Watt generator/welder, 6 1/2" bench vise. Runs and starts good. 331 2005 Chevrolet Silverado Pickup Truck VIN #: 1GCHK24U15E344291 Mileage: 252,370 miles Body Type: Single cab Drive Line: 4WD Engine Type: 6.0L Vortec engine Fuel Type: Gasoline Transmission: Automatic Features and Notes: Long bed, runs and drives good. Includes stainless tool box. Does not include transfer fuel tank in pictures. 332 2007 GMC Sierra 1500* VIN: 1GTEC14CX7Z562162, GVWR: 6400 lb., meter reads: 177303 miles, 2WD, single cab, short bed, 4.8L Vortec engine, auto transmission, AC/Heat works great, includes toolbox. Good running pickup 333 2006 Chevy Silverado 2500 HD* VIN: 1GCHK24U66E108270, GVWR: 9200 lb., meter reads: 246417 miles, 6.0L Vortec engine, 4WD, auto transmission, single cab, includes tool box. Does not include fuel tank in pictures. Good running truck, AC works great! 334 2010 Chevrolet Silverado 1500 Pickup Truck* VIN: 1GCSKPE3XAZ178154, GVWR: 7000 lb, meter reads: 305,097 miles, 4WD, auto transmission, 5.3L Vortec engine, extended cab, 7' bed, 2" hitch recievers front and back. Good, running pickup 338 2009 Toyota Tacoma* VIN: 5TENX22N89Z639570, GVWR: 4650 lb., meter reads: 273299 miles, single cab, short bed, 2WD, auto transmission, 2.7L 4 cylinder engine. Good running pickup 340 Cosmo Flail Mower* Model: FL 145, SN: 18048079, made in 2018, 60" wide, pto and 3 point hitch 341 Shaktiman Roto-Tiller* Model: UM72, SN: AGBI101113039, made in 2018, 6' wide, pto hookup 342 Shaktiman Roto-Tiller* Model: UM72, SN: AGBI101113038, made in 2018, 5' wide, pto hookup 343 Frontier Hay Mower* SN tag missing, pto hookup and 3 point hitch, hydraulic cylinder for control, 8'6" cutting head width 344 Ideal Pull Behind Post Pounder* Kohler 14 hp gas motor, hydraulic controls and cylinders, ST225/75R15 tires, pin through hitch, has rack for holding posts, good condition 345 Ideal Post Pounder Attachment* Standard skid steer quick attach and hydraulic controls, 10 x 21 x 12" hydraulic tank. In good condition 346 Ideal Post Pounder Attachment* Standard skid steer quick attach and hydraulic controls, 10 x 21 x 12" hydraulic tank. In good condition 347 90" Snow Pushing Box Blade* Standard skid steer quick attach, made with 1/4" steel 348 90" Snow Pushing Box Blade* Standard skid steer quick attach, made with 1/4" steel 350 Electric Motors (4) 25-30 hp, 286T frame, 1470-1780 rpm 351 Howard Electrical Transformer 120/240 V, 240/480 V 352 Electric Motors (1) 75 hp, 1780 rpm, 365T frame, 230/460V, (1) 20 hp, 256T frame, 3510 rpm at 230/460 V 353 Electric Motors 8 total, 1-20 hp, bearings included 354 Electric Motors (1) 25 hp, 1180 rpm, 324T frame, (1) 7.5 hp, 213T frame, 1760 rpm, 460 V 355 Electric Motors 9 total, 1.5-5 hp 356 Electric Motor 40 hp, 324T frame, 230/460V 357 Electric Motors 7 total, (2) 5 hp 184T frame, (5) no tags-approx. 5 hp 417 Shop Press Self contained hydraulic unit, assorted blocking 358 Electric Motors (2) 25 hp, 284T frame, 460 V 359 New Electric Motor 5 hp, 182/4T frame, 1730 rpm, 230 V 360 Square D 3 PH Transformer 75 KVA 361 Lincoln Electric Motor 150 hp, 444T frame, 460 V, 1780 rpm 362 Lincoln Electric Motor 100 hp, 1780 rpm, 460 V, 405T frame 363 Pallet of Motor Frames 364 Electric Motors (1) no tag-approx. 30 hp, (1) 1 hp, 143TC frame, 1725 rpm, 460 V 365 Electric Motors (1) 60 hp, 1780 rpm, 460 V, 364T frame, (1) 30 hp, 1760 rpm, 286T frame, 460 V 366 Electric Motors (1) 50 hp, 1780 rpm, 326T frame, (1) 30 hp, 1760 rpm, 285T frame, (1) 40 hp, 460 V, 1780 rpm, 324T frame 367 Electric Motors and Gearboxes (1) 3 hp with gearbox, (1) 5 hp with 6:1 gearbox, (1) 5 hp, 1740 rpm, RX184T frame 368 Electrical Parts 3 crates of switches and breakers 369 Banding Cart Partial roll of 3/4" steel banding on cart, includes 3/4 box of clips and full roll of 3/4" banding 370 Pallet of Pulleys, Sprockets and Bushings 371 pallet of Electric Motors and Gearboxes 1-5 hp, 4 motors 434 Flat Conveyor Belt 3/8' x 30' length unknown 372 Pallet of Gearboxes 373 Pallet of Air Parts Air hoses, fittings, filters, compressor parts 374 Pallet of Paint Materials Spray paint, paint cans, rollers, tray 375 Pallet of Misc. Parts Conduit fittings, cylinders, hydraulic pump, oil pump, electrical components 376 Pallet of Hydraulics Pumps, hoses, fittings, valves 377 Banding Tools 3 crimpers, 2 strapping tools 378 Pallet of Electricals Lights, pedal controls, wiring, breakers, fuses, switches 379 Pallet of Assorted Bearings 379A Husk Wrenches 1 wrench, 2 tooth setters, 1 crowbar 380 10 Cubic Yard Wheelbarrow 381 Wheelbarrow 30 x 36' x 2 wheeled 382 Pallet of Husqvarna Chainsaw Parts Oil pump, router table 383 Pallet of Misc. Parts Motor and gearbox mounting plates, 7.5 hp motor, rollers 384 Crate of Belts Lots of new belts, for misc. equipment in sawmill 385 Pallet of Belts Lots of new belts, for misc. equipment in sawmill 386 Trash Pump 3" Yamaha pump powered by 300 cc Yamaha motor, includes hose and fittings, small 110 V sump pump 387 Pallet of Castors 2 rolls of H78 chain, wheels, 2 hydraulic pumps 388 3 Chip-Chute Adapters Fit precision chipper 389 Electric Motor 150 hp, 460 V, 1780 rpm, 445T frame 390 Electric Motor 50 hp, 230/460 V, 1780 rpm, 326T frame 391 Electric Motor No tag on motor, estimate 50-100 hp 392 Pallet of Ladder Back Chain 12" chain and rollers for log trough 393 Head for Morbark Debarker Main cutting head, includes covers 394 3 Drum Debarker Heads For Morbark debarker, all 16 x 20" 395 New Conveyor Belt Cleated, 30" wide, length unknown 396 New Conveyor Belt Cleated, 36' wide, length unknown 397 Conveyor Belts (1) 48", (1) 36" cleated, lengths unknown 398 Conveyor Belts 4-29" widths, lengths unknown 399 Conveyor Belts (4) 30" wide, (1) 28" wide, lengths unknown, like new condition 400 Conveyor Belts (1) 60", (1) 30", (1) 16" cleated, lengths unknown 401 Hand Tools 2 Shovels, 2 brooms, scraper, cant hook 402 Hand Tools 2 Shovels, 2 brooms, scraper, cant hook 403 Hand Tools 2 Shovels, 2 brooms, scraper, cant hook 404 Hand Tools Shovels, brooms, cant hook, 6' step, 300 lb. capacity ladder 404A Bucksaw Rack 5' x 10', good condition 404B 3/4" steel Banding 12 full rolls of new banding 404C Stacking Rack 16 x 60 x 54" tall 405 Wheelbarrow Single wheel 406 Wheelbarrow 2 wheeled 407 Barn Sweep Paddles and Chain 18" paddles 408 Poly Deck Strips and Metal Bracing (8) 32" long braces, 1/2-3/4" thick poly 409 Rack with Angle Iron 410 Rack with Flat Steel 411 Rack with Scrap Shafts 30 x 30 x 42" rack 412 Crate of Roller Chain 413 Pallet of H78B Chain 414 Pallet of Chain 15 rolls of H78, 2 rolls of regular chain 414A Fuel Tank on Stand 38' x 5' long, on stand bolted to skid, 43 x 68 x 70" tall overall 414B JET Metal-Cutting Bandsaw* 110 plug-in, on castors 414C Lemas Metal Bender* Model: LH-3RS, SN: 329025, made in 2007, capacity 75 x 75 x 9.0, electric drive, portable control stand, electric box, hydraulic cylinder 414D Portacool Fan* 110 Plug in, water hookups, has water pump, 40 x 75 x 85" tall, 48" fan, 2 speed 414E Horn Bend Pro G2 Horizontal Tube Bender* Bends up to 3" pipe, includes operator's manual, (2) 480 V electrical boxes, computerized control panel, 40 hp electric motor with hydraulic pumps, valve station and cooling unit, 7' x 22' overall, buyer will need to arrange loadout by appointment. Good, working machine just no longer in use. 415 Pallet of Paddle Chain 34" wooden paddles 416 Pallet of Chain Roller chain, H78B, chain with pegs 418A 5 HP Hydraulic Pack* 32 x 16 x 16" tank, cooling unit, valves, electric box 418B Rousselle 6F Press* SN: 16960, Tonnage 60, 3 stroke, 12 1/2" shut height, 75-150 strokes/min electric drive, 460V cutout box 418C Steel Break* Electric drive, 6' wide 418D Willis-Bergo Radial Arm Drill Press* 4 prong plug in, 30 x 78 x 80" tall, 6 speed, good condition 419 New Shaft Stock (1) 2 1/8" x 10', (1) 1 15/16" x 4', (1) 2 15/16' x 12', 2 short pieces 420 Barrel Dolly Motor Oil 15 gallon Morlina oil SD220, Barrel dolly 421 Tivar, Sawhorses, and Steel Wear Plate (1) 1/2" x 4' x 8', (1) 1/2" x 3' x 8', (1) 3/4" x 32" x 8', (1) 3/4" x 7" x 8', 13' steel wear plate, 4' sawhorses 422 Cant Hook and Air Hose 3 air hoses, 48" cant hook 423 Brooms, Shovels, and Scraper 5 brooms, 9 shovels, 1 scraper 424 Louisville Step Ladder Fiberglass 8' ladder 425 Shop Hoist 1/2 Ton SM-01, 110 V 426 Rack wit Shaft Stock Several pieces, 1 15/16" x 12', assorted shaft pieces 427 Board Stops For deck on resaw runaround 428 Parts Lot New seat for cab, V belts, 1/2" air hose 429 Steel Crate with Parts 7" flat 3 piece length unknown, gearbox, air cylinder, bolts 430 Wire Create with Parts Flat belt, assorted parts 431 Shell Hydraulic Oil S2MX46, 1 new barrel, 2 barrels with pumps-feel full, spill box 432 New Barrels (1) barrel Shell Rotella TI SAE 10W motor oil, (1) barrel Shell Tellus S2 MX 46 hydraulic oil, (1) barrel Anchor seal 2 summer formula 433 Wire Create V belts, 40' x 40" crate, 1/2" x 52" x 35" 435 Barrel Lift Slips on forks 436 Cabinet with Parts 6' x 72' x 26", assorted new sprockets 437 Extension Cord 4 wire cord with plugs 438 Guard Fence 70" high, 2-54" section with door, (1) 10', (1) 54' 439 Hoist A-Frame 116' inside, adjustable height 7' to 11' 440 Cox Reels, Air Hose Reel, and Cord Reel Retracting reel, includes hose, extension cord on reel 441 Barrel Hydraulic Oil with Pump Spill tray, hand pump, full barrel, shell S2MX32 442 Floor Stand Fan 18" electric drive 443 Storage Box 48' x 24' x 24', steel box, all contents 444 Corley Parts for Carriage and Husk Dogs for carriage, bearings for carriage, cant kicker cylinders, computer control board, saw guides, Joystick handle, air valves 445 Corley Resaw Parts New shaft and bearings for top wheel, air cylinders, air valves, new cylinder and control valve for line bar feed, hydraulic motors, assorted filters and parts 446 Edger Parts Log Turner Cylinder Sliding bearings for edger, new shaft for edger, cylinders for bar turner, encoders, saw guide blocks 447 Morbark Debarker Parts Hydraulic cylinders, motors, valves, relief valves, filters, drum spikes, lots of new parts 448 Slab Dump Parts (2) air cylinder, 8" bore 12" stroke, new 3/8" x 30" belt for slab dump, seal kit, (1) 24" belt no lacing 449 Precision Chipper Parts (3) new bearings, new knife holders, counter knives, knife clamps, anvils, paddles, bolts, swivel rod ends, anvil plate, probably enough parts to redo 3 chippers 450 Flexco Belt Lacing Tool and Parts Toolbox with tools and parts, lots of lacing supplies 451 Electric Motors and Gearbox 2 motors special order for edger, browning 1.5 p with gearbox, Nema 5 hp motor 543 Hydraulic Pumps and Gearbox New Quantis gearbox used on resaw, new Vickers pump for debarker, Vickers pump PUB45A RSF 10 CAII-387539, tension bars 544 Laser Lights, Volvo Parts, and Tempasonic Rod 4 new Laser Blazer lights, 2 used lights, Volvo pins, light, door latches, 1 new Tempasonic rod 545 Heaters, Lamps, Chipper Blade Grinder 9 electric heaters, heat lamps, DeWalt chipper blade grinder with discs 546 Hose Supplies and Hand Tools DeWalt saws, 1/2" Milwaukee impact, assorted hoses 547 Webster Vibrating Conveyor Drive and Parts New drive for Webster conveyor, bushings for Precision conveyor, 30" planer knives, new bearing Dodge FC-S2-215RE 2 15/16' 567 Miller Welder Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads 548 Cylinders and Parts New air cylinder for cant pusher 6" bore 40" stroke, cylinder for carriage 568 Miller Welder Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads 549 Schneider Starter and Parts Schneider soft start used on Corley resaw, wiring for resaw, Toggle switches,, grease guns, panel for Trimmer control, air foot valve 550 Hubs and Sprockets Bearings Lots of new Sprockets, Timken bearings 570 Miller Welder Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads 594 Loader Tires Michelin, XHA2, 3 new tires, 20.5/R25 tires, 1 used may need patched 551 Split Sprockets and Hubs Lots of new hubs and sprockets 571 Miller Welder Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads 552 Tsubaki Roller Chain and End Evener Web Parts (2) 100D Tsubaki chain (extra hard), steel web for end evener, plus sprockets, Morbark debarker shield 553 Domestic Brisk II AC Unit New rooftop air conditioner unit, 3 7/16" x 38" debarker shaft 573 Miller Welder Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads 554 Morbark Debarker Head and Cart Debarker head 32" shaft, 48" x 24" cart on wheels, fall restraint harness 555 Shop Cart on Wheels 40" x 18", all contents 556 Parker Carriage Drive Pump Connector bushing, fan pulley 557 Parker Hydraulic Motor Carriage Drive New motor for carriage drive, LB 31878 558 Oil and Air Filters Assorted filters on skid 559 Roller Chain Lots of new roller chain, assorted sizes 560 Tire Changer Cordless Grease Guns Lots of hand tools, DeWalt grease gun, Milwaukee grease gun, portable air over hydraulic tire changer 561 Buck Saw 6', extra blade and chains 562 2 Mandrel Shaft 2 15/16" x 11' with 8" collar, same on Corley mill, 2 7/16" x 11' with 8" collar, new shafts 562A Information Lot The following welders were taken out of production at Tarter Gate and were functioning properly when removed from production. 563 Miller Welder Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads 564 Miller Welder Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads 565 Miller Welder Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads 566 Miller Welder Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads 569 Miller Welder Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads 572 Miller Welder Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads 574 Miller Welder Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads 575 Miller Welder Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads 576 Miller Welder Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads 577 Miller Welder Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads 578 Miller Welder Model: CP-302, SN: MC280244V, 5 pieces, 300 amp output, 3 ph electric, no wire feed unit 579 Miller Welder Model: CP-302, SN: MC280244V, 5 pieces, 300 amp output, 3 ph electric, no wire feed unit 580 Miller Welder Model: CP-302, SN: MC280244V, 2 pieces, 300 amp output, 3 ph electric, no wire feed unit 581 Miller Wire Feed Units 60 series, (1) 75 series, most units tested ok 582 Tweco Mig Welding Gun 2 Welding guns, torch hose, shield 583 Miller Welder Model: CP-302, 300 amp output, 3 ph electric, 60 series wire feeder, 588-70 series, 590-70 series 584 Miller Welder Model: CP-302, 300 amp output, 3 ph electric, 60 series wire feeder, 588-70 series, 590-70 series 585 Miller Welder Model: CP-302, 300 amp output, 3 ph electric, 60 series wire feeder, 588-70 series, 590-70 series 586 Miller Welder Model: CP-302, 300 amp output, 3 ph electric, 60 series wire feeder, 588-70 series, 590-70 series 587 Miller Welder Model: CP-302, 300 amp output, 3 ph electric, 60 series wire feeder, 588-70 series, 590-70 series 588 Miller Welder Model: CP-302, 300 amp output, 3 ph electric, 60 series wire feeder, 588-70 series, 590-70 series 589 Miller Welder Model: CP-302, 300 amp output, 3 ph electric, 60 series wire feeder, 588-70 series, 590-70 series 590 Miller Welder Model: CP-302, 300 amp output, 3 ph electric, 60 series wire feeder, 588-70 series, 590-70 series 591 5 Miller Welder Model: CP-302, 300 amp output, 3 ph electric, no welding leads, no feed unit 592 Miller Welder Model: CP-302, 300 amp output, 3 ph electric, no welding leads, no wire feed unit 592A Miller Welder* Model: CP-302, no SN tag, 4 prong plug, 592B Miller Welder* Model: CP-302, SN: LC456392, Miller 60 series, wire feeder, 4 prong plug 592C Miller Welder* Model: CP-302, SN: LG280145C, 200/230/460V, 4 prong plug 592D Miller Welder* Model: CP-302, SN tag is missing, 200/230/460V, 4 prong plug, Miller 70 series 24 V wire feeder 592E Miller Welder* Model: CP-302, SN: KK303259, 200/230/460V, 4 prong plug, Miller 70 series 24 V wire feeder 592F Miller Welder* Model: CP-302, SN: LB089213, 200/230/460 V, 4 prong plug, Miller 70 series 24 V wire feeder 592G Miller Welder* Model: CP-302, SN: ME130125V, 200/230/460V, 4 prong plug, Miller S60 24V constant wire feeder 592H Miller Welder* Model: CP-302, SN: LF430122C, 200/230/460V, 4 prong plug 592I Miller Welder* Model: CP-302, SN: ME130417V, 200/230/460V, 4 prong plug 592J Pallet of Brand New Gates Hydraulic Hoses* 1/2" hoses with fittings 592K Steel Pins* (160) 1 1/4 x 5", (111) 1 1/4" x 7" 592L Bolts and Fittings* (1,000) 1/4" hydraulic fittings for skid steer attachments, (200) 1 1/4" x 9 1/2" bolts with 1 7/8" head 593 Pallet of New Attachment Parts* Spindles, nuts, and studs for skid steer attachments 593A Pallet of New Hydraulic Cylinders* (Approx. 60) 24", for skid steer attachments, 593B Pallet of New Attachment Parts* Spindles and nuts for skid steer attachments 593C New Hydraulic Valve Stations* 15 pieces 593D New Hydraulic Cylinders* (70) 24", for skid steer attachments 593E Plate Steel* (420) 3/8" x 12" x 12" 593F Plate Steel* (168) 3/8 x 12 x 12" 593G Plate Steel* (280) 12 1/2 x 49"-14 gauge 593H Plate Steel* (140) 12 1/2 x 49"-14 gauge 593I Plate Steel* (267) 12 1/2 x 49"-14 gauge 593J Plate Steel* (Approx. 140) 12 1/2 x 49" - 14 gauge 593K Plate Steel* (Approx. 250) 12 1/2 x 49"-14 gauge 593L Plate Steel* (Approx. 400) 12 1/2" x 49"-14 gauge 593M Plate Steel* (300) 12 1/2 x 49"-14 gauge 593N Plate Steel* (400) 12 1/2 x 49"-14 gauge 593O Plate Steel* (400) 12 1/2 x 49"-14 gauge 593P Plate Steel* (400) 12 1/2 x 49"-14 gauge 595 Wire Crate with Belts Lots of new v-belts, assorted sizes, 48' x 48" x 30" crate 596 Ingersoll Rand Air Compressor Model: SSR-EPE50, 208 CFM, 50 hp electric, hours unknown, was running when taken out of service 597 Ingersoll Rand Air Compressor Model: SSR-EP15U, 55 CFM, 15 hp electric motor, was running when removed from service 598 Amerex Fire Extinguisher Portable unit with pintle hitch. Last tested 6/21 598A Pallet of Misc.* (1) 5 hp motor, (1) 1/2 hp motor, gearbox, chain, motor stand, pipe clamp 599 ZEKS-Therm Air Dryer Model: 400 H SBA 400 600 Steel Flat Stock 1/2" x 4' x 8', one corner cut out 601 Steel Flat Stock 1/4" x 4' x 8', 1 full sheet, 1 part piece 602 Stake Pointer 2 heads, 5 hp electric 603 Air Tank Vertical tank, 3' x 7' 604 New Loader Forks 6" x 44", round hole mount loader forks, 2" hole 604A Vibrating Conveyor* 18" pan, 9" flared sides, 2 sections, includes chipper infeed section, 31" x 33'6" total, no drive 604B 2 Yard Self Dumping Hopper* Has fork pockets, 5500 lb. capacity 604C Cantilever Rack* In 2 pieces, 68" x 12'8" tall 604D Cantilever Rack* In 2 pieces, 68" x 12'8" tall 604E Loader Forks* 6 x 48" forks, 20" slot spacing 604F Jib Crane Attachment* 10' long, 5 1/2" fork pockets-19" apart 604G Lumber Carts* (1) 44 x 74", (1) 29 x 74" 604H Fuel Tank for Truck* 2' x 5' 604I Rack with C-Channel Steel* 26 x 30" rack, 3" wide, 54"-9' long, 1/8" thick 604J Pallet of Misc. Steel* 604K 2 Barrels of Tire Chains* For 11R22.5 tires 604L Pallet of Tire Chains* For 11R22.5 tires 604M Fuel Transfer Tank with Pump* 28 x 48 x 16", GPI 15 psi, 12V pump, 60 gallon capacity 604N Transfer Tank and Toolbox* 32 x 50 x 20" tall, 74 gallon capactiy, 12V 15 gpm pump, 16 x 48 x 9" deep toolbox section 604O Lumber Cart* 40 x 60 x 42" tall 604P Tube Steel* 4 x 7 x 128" 604Q Tube Steel* 4" x 4" x 15'10" 605 4 Strand Log Deck 11' x 18', 12'1" overall width, electric drive 606 Material Rack* Has fork pockets, 55" x 78" x 8' tall 607 Material Rack* 28" x 8' x 50" tall 608 Lumber Cart* 44 x 60" 609 Hydraulic Press* 13 x 34 x 16" tank, electric drive 610 25 HP Hydraulic Pack* 25 x 37 x 18" tank, electric box 611 Catwalk Steps* New condition. 36 x 70 x 80" tall 612 Material Rack* Has fork pockets, 64 x 72 x 90" tall 613 Overhead Hoist Frame* 5' x 10'4" x 8' tall 614 Log Deck Strands* 6 strands total, 8' long, fits up to 3 3/4" wide chain 615 Forks* 5 x 48" forks, 16" slot spacing 616 Forks* 5 x 52" forks, 16" slot spacing 617 Material Rack* 44 x 52 x 38" tall 618 Steel Table* 55 x 60 x 38" tall 619 Hydraulic Pack* Electric motor, hp unknown, 25 x 42 x 25" tank 619A Twin City Fan and Blower Unit* SN: 0015029411, size: 402, type: AFPL, 15 hp electric motor, 2 3/16" shaft, 55 x 55" frame, 5" x 100" pipe 620 Froedge Roll Case* Model: 40315, made in 2000, electric drive, 6 1/2 x 36" rolls, 18" spacing, 4' x 13' overall 621 Froedge 4 Strand Transfer Deck* H78B turtletop chain, hydraulic drive, 5' x 15'6", side rolls 622 3 Strand Transfer Deck* 9' x 14', no drive, H78 chain 623 Chipper Chute and Pipe* Steel 12" elbow chipper chute, 20" x 17'6" steel pipe section 624 4 Strand Transfer Deck* No chain or drive, 9'6" x 11'6", disassmebled, fits 3 1/2" chain 625 Hydraulic Press* Hydraulic cylinder, 12" x 12' x 3' tall up to 2 1/2" pipe 626 Pipe Bender* 3' x 24' frame, up to 1 3/4" pipe, (2) bending heads with hydraulic cylinders and valves, electric control box 627 Diesel Fuel Tank and Spill Containment Box* 4' x 11' tank with electric pump, 5' x 12'6" box 628 Rubber Floor Mats* 4' x 6' x 3/4" thick, 7 pieces 628A HS 1/4 Ton Overhead Hoist* Does not include a chain hoist, 11' long cross beam, 13' tall post (in 2 pieces) 628B Incline Belt Conveyor* No motor, has 480V cord, 56" belt, 6' x 12' x 112" tall, mounted on castors, has steel welded across top to make height capacity 1 1/2" 628C Steel Tube* 20" x 17' long, 22 x 29" cover on 1 end 628D Cantilever Rack* (2) 68" x 10' tall 628E Steel I-Beam* 6" x 18" x 50' long, has 9" wide C-channel on 1 side 628F Ventilation Pipe* Approx. 100' of 36" pipe, 2 elbows, 2 adapters, 1 vent, will include all flanges. 629 Material Rack* Has fork pockets, 4 x 10 x 4' tall 630 Material Rack* Has fork pockets, 7' x 8' x 52" tall 631 Pallet Racking* (18) 16' long "L" brackets, includes all supports and crossbraces 632 Jib Crane* 5" fork pockets-30" apart, 3' x up to 10' wide 633 Jib Crane* 5" fork pockets-30" apart, 3' x up to 10' wide 634 Material Cart* 2 tier, 6' x 6' x 52" tall 635 Material Cart* 2 tier, 6' x 6' x 52" tall 636 Material Cart* 2 tier, 6' x 6' x 52" tall 637 Material Cart* 2 tier, 6' x 6' x 52" tall 638 Steel Table* 45 x 60 x 28" tall 639 Loader Forks* 6 x 42" forks, 3' tall 640 Steel Shelf* 3' x 12' x 68" tall 641 Material Cart* 2 tier, 6' x 6' x 52" tall 642 Material Cart* 7' x 8' x 80" tall 643 Steel Landing Table* 100" x 122" x 18" tall 644 Steel Landing Table* 100" x 122" x 18" tall 645 Steel Rack and Blow Pipe* 4' x 6' rack, steel pipe, (1) 12" x 6' pipe, (1) 12" x 16' pipe 646 Skate Rolls* 54" x 10' x 18" tall, 2 1/2" x 50" rolls, 3" spacing 647 Skate Rolls* 54" x 10' x 18" tall, 2 1/2" x 50" rolls, 3" spacing 648 Skate Rolls* 54" x 10' x 18" tall, 2 1/2" x 50" rolls, 3" spacing 649 Rack with Angle Iron* 44 x 44" rack, 2 1/2-3" angle iron, 6" table steel 650 Steel Storage Bins* (4) 44 x 54 x 38" deep 651 Steel Storage Bins* (4) 44 x 54 x 38" deep 652 Steel Storage Bins* (4) 44 x 54 x 38" deep 653 Steel Storage Bins* (4) 44 x 54 x 38" deep 654 Steel Storage Bins* (4) 44 x 54 x 38" deep 655 Steel Storage Bins* (4) 44 x 54 x 38" deep 656 Steel Storage Bins* (4) 44 x 54 x 38" deep 657 Steel Storage Bins* (6) 44 x 54 x 38" deep 658 Steel Storage Bins* (4) 44 x 54 x 38" deep

Listing Information

After establishing a prosperous presence in the industry, Tarter Wood has made the strategic decision to liquidate its sawmill operations, including the logistics division and a substantial inventory of high-quality rolling stock. This move will allow Tarter Wood to expand its globally renowned enterprise, Tarter Gate Company LLC, within the available space. The equipment selling at no reserve auction is exceptionally well-maintained, predominantly with one owner. Check it out!

Information Lot
This is an absolute auction, meaning there are no minimums, no reserves, and no seller bidding. The highest bidder will be the new owner!
Auction Agent: Eugene Hochstetler 574-242-1100
Seller Name: Tarter Wood
Highlight Pieces: Peterbuilt truck fleet, 5 late model wheel loaders, D6 Cat dozer, Late model Corley resaw, Iseli filing equipment in mint condition, Precision chipper in close to new condition.

Preview Information
Day before auction or by appointment. Call Eugene 574-242-1100
Location of auction: 11346 US 127 Dunnville, KY 42528

Loadout Information
Bright Star will staff loadout for Friday, Monday-Thursday of the following week.

Payment Information
6% KY Sales Tax-Semi trailer exempt. Payment terms: 10% Onsite Buyers Premium, 13% Buyers Online Premium. Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction.

CAT 972M Wheel Loader 1:50 Scale Replica- Die Cast Metal
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s

Heavy Equipment Key Set 36 Keys
Shipping available for $20

Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

Chipper Knife Dresser
Series I, electric drive

Jockey Grinder
Model: 06H, Milwaukee drill powered

99A

Cedar by Juniper Tallying System*
1 phone reader, 1 scanner, 5 controllers, includes chargers

100

Morbark 640 Debarker
Purchased new in 2006 (1st of an entirety) SN: 1060, stationary head, 50 hp electric hydraulic pak, hydraulic drive feed rolls, motor on head sells separate, no support structure, cutout box

100A

Lincoln Electric Motor
(Part of an entirety) 125 hp, 1785 rpm, 405T frame, WYE Delta starter, cutout box

101

Morbark Log Trough
(Part of an entirety)2006 Model: 25-in, SN: 1060, web chain 13", one end lift, legs to first beam, hydraulic drive, 25' long

102

Morbark Log Trough
(Part of an entirety) 2006 Model: 30-out, SN: 1060, 11" ladderback chain, hydraulic drive, 2 way kickers, no support structure, 30'

103

Morbark Operators Cab
(Part of an entirety) 4'6" x 5', AC unit, all control valves for debarker, electric control boxes, no support past legs, no catwalk or stairs

104

Morbark Paddle Conveyor
(Part of an entirety) 36" pan x 35', 13" sides, hydraulic drive

105

Morbark Paddle Conveyor
(Part of an entirety) 36" pan x 40' elevated, hydraulic drive

106

Support Structure with Stairs and Catwalk for Debarker
(Part of an entirety) 6" x 10" tube top rail, 6"x6" tubing post, 4"x4" tubing post for cab, stairs with railing

107

Morbark Debarker Entirety of Lots 100-106
With 10% raise

108

Morbark 3 Strand Log Deck
2006 11' x 24', stop'n'load, Tulsa winch gear box with hydraulic motor, gears are showing some wear, support to first beam or posts, catwalk on side

108A

Morbark Log Bunks
87" x 128", Log catching bunks

108B

Tulsa Winch Gearbox with Hydraulic Motor
In good condition

109

Corley 3 HB LP Carriage
(1st of an entirety) Installed new in 2000, 110 V over air controls, cant kickers, pantograph arm with support post, no controls, 16' x 10' overall

109A

Lewis Scanner Controls for Carriage
(Part of an entirety) 20' scanner bar, includes mounting beam, all controls in cab related to Lewis controls

110

Corley 56" Circular Husk
(Part of an entirety) 56" saw, 42" topsaw, 24" x 6' live off bear belt, 21" belt, saw wrench, no power

111

Lincoln Electric Motor
(Part of an entirety) 200 hp, 1785 rpm, 445T frame, 600 amp, 480 V fuse box

112

Baldor Solid State Soft Start
(Part of an entirety) 200 hp

113

Corley Operators Cab
(Part of an entirety) 11' x 54", no controls

114

Hydraulic Pack for Carriage Controls Berendsen Fluid Power
(Part of an entirety) 20 hp electric, 15 gallon per min., 1800 psi, 60 gallon tank, electric cut out spill tray

115

Carriage Track and Frame
(Part of an entirety) 54 1/2' center to center x 55', end stops, no support structure

116

Tyrone Berry Shotgun Feed Carriage Drive
(Part of an entirety) 100 hp electric, directional valves, hydraulic lines to cylinder, electric cutout, drive cylinder with 42' travel, control valve in cab

116A

WYE Delta Starter and Cutout
(Part of an entirety) 100 hp, cutout box, used on carriage feed

117

Corley Mill Entirety of Lots 109-116
With 10% raise

118

Corley Bar Type Log Turner
5' bar, hydraulic drive, control valve in cab

119

Electric Hydraulic Pack
50 hp motor, 34" x 23" x 25" tank, line to valve and turner

120

Corley 3 Strand Log Deck
11' x 48' includes 4' nose skids, 13'8" overall width with side rail, electric drive, hydraulic stop'n'load

121

Dayton Dust Blower
18" blower, 8" inlet, 4" outlet, 5 hp electric drive

122

Slab Dump Belt
42" x 15', 30" x 13' belt, electric drive, air cylinder raise

123

Corley Cant Catcher
Installed new in 2019! 11' long x 9'6" wide, 42" stroke on pusher, air cylinder drive, no support structure

124

Live Roll Case
40" x 60', 2 separate drives, electric drive, 6 1/2' x 30" rolls, no support past legs, trip switch

125

3 Strand Pop-Up Transfer
9' x 8'6", electric drive

126

Baren Gang Edger
4 blades 18", laser blazer, laser lites, 2 movable blades, 2 tailing belts (1-16" x 30', 1-6" x 30'), 75 hp electric, no support structure, 6" x 48" capacity

126A

Edger Blades
18", 3" arbor, freshly sharpened, 28 blades

126B

Saw Blades
(2) 20' with 1" arbor, (2) 18" with 1" arbor

128

Corley 6' Line Bar Resaw
(1st of an entirety) Installed new in 2019!! SN: 16477, 13" x 6' wheels, hydraulic strain, date: 1/16/2018, 2018 CBM12, 36' x 10" bands, 3" bands included, no support structure

128A

Nema Electric Motor
(Part of an entirety) 200 hp, 1190 rpm, 449T frame

129

Operator Cab with Lewis Control Center
(Part of an entirety) All controls for resaw, steps and platform, AC unit, leg supports to first beam

130

Corley Line bar Feed
(Part of an entirety) SN: 16477, date: 1/16/2018, 2018 LB41, side press roll with hydraulic drive, hydraulic feed rolls

131

Corley Cant Infeed
(Part of an entirety) Pickup and placement roll case, side transfer chains, cant stops, hydraulic drive, 14' x 5'4" overall, 9" x 24" rolls

132

Corley Outfeed Board Separator
(Part of an entirety) 7' x 20' overall, 9" x 36" rolls, lifting end roll, two way chain sorter, board and cant splitter, hydraulic drive

133

Hydraulic Pack for Resaw
(Part of an entirety) 15 hp electric, valve bank, hoses to resaw, oil cooler, 27' x 47" x 15" tank

134

4 Strand Transfer
(Part of an entirety) 11' x 10'9", 4' tipple arms, end shaft is connected to next deck but can be removed, no support to ground

135

Corley 180° Transfer
(Part of an entirety) 4 strand, DF3500 chain, legs to first cross beam, 10'6' wide, 38' wide overall, electric drive, includes steps

136

Corley 4 Strand Transfer with Cant Turner
(Part of an entirety) 12' x 14', cant stops, cant turner, electric drive, legs to first beam

137

Operators Cab with Controls
(Part of an entirety) 5'x5', AC unit, Lewis controls for runaround and cant turner, legs to first beam

137A

Hydraulic Pack for Resaw Line
(Part of an entirety) 40 hp electric with 2 pumps, 25 hp electric with 2 pumps, oil cooler, 53 1/2' x 47 1/2" x 24" tank, mounted on spill tray

138

Square D Motor Control Center
(Part of an entirety) 600 V, 800 amp, 8 sections, all motor controls for resaw line

139

Resaw and Runaround Entirety of Lots 128-138
With 10% raise

140

Corley 4 Strand Transfer Deck
9'6" x 24', cant stop, electric drive, 4 arm cant pickup

141

Belt Conveyor
35" x 21', 25' pan, 10" side, no support structure, electric drive

142

4 Strand Transfer Deck
11' x 28' flat plus 14' on slant, no legs or support structure, 4' tipple arms, no lift cylinder

143

Belt Conveyor
32" x 28', 25" pan, 24" belt, 42' tipple arms with skate rolls, electric drive, legs to first beam

144

Belt Conveyor
35' x 28', 25" pan, 24" belt, electric drive

145

4 Strand Transfer
11' x 13', H78B rooftop chain, with cant stop, electric drive, 11'10" wide overall, steps on side, no legs past first I beam

146

4 Strand Transfer
9'6" x 13', H78B rooftop chain, with cant stop, electric drive, air controls, no legs past first I beam

147

6 Strand Elevated Transfer Deck
12' x 11'6", only 3 strands have chain, electric drive, support to ground

148

Corley Drop Saw Trimmer
New in 2018, 22' wide, 20' capacity, 10" x 34" board positioner rolls with end stop, 10 hp electric on saws, 26" blades, 8 strand feed chain, no sprockets on one end, small motor starter box

148A

Trimsaw Blades
New in 2018, 26" with 1 3/8' arbor, 21 blades, freshly sharpened

149

Grading Deck and Length Sorting Deck
New in 2018, 12'6" x 20' with spiral end evener rolls, 6 strand transfer chain, length sorting switches, electric drive

150

Froedge 3 Strand Transfer Deck
New in 2018, 9'6" x 17', electric drive

151

Froedge 6 Strand Elevated Deck
New in 2018, 10'6" x 10', electric drive

152

Froedge Unscrambler 6 Strand with bars
New in 2018, 12' x 13' tall, 3 sections of bars, phot eye sensor

153

4 Strand Transfer Deck
New in 2018, 10' x 7', no support past first I beam, electric drive

154

4 Strand Transfer Deck
New in 2018, 9'6' x 24', electric drive, H78B rooftop chain, steel decking, no support past first I beam

155

4 Strand Transfer Deck
New in 2018, 10' x 20', H78B rooftop chain, no sprockets on one end, attached to 154, no support past first I beam, electric drive

156

6 Strand Waterfall Unscrambler
New in 2018, 16' x 8' x 68" tall, 3 sections of bars, electric drive, no support structure

157

5 Strand Elevated Transfer Deck
17' wide overall, 10' long strands, drop down deck from trim saw, no drive, no shaft or sprockets on top end

158

4 Strand Green Chain
10' x 80', steel decking, electric drive

159

Lumber Carts
60" x 42' x 32" posts, straight steel wheels, 5 carts

160

Lumber Carts
60" x 42' x 32" posts, straight steel wheels, 5 carts

161

Lumber Carts
60" x 42' x 32" posts, straight steel wheels, 6 carts

162

5 Lumber Carts
60" x 48" x 32" posts, straight steel wheels

163

5 Lumber Carts
60" x 48" x 32" posts, straight steel wheels

164

4 Lumber Carts
60" x 48" x 32" posts, straight steel wheels

165

3 Lumber Carts
(2) 60" x 41 x 32" posts, (1) 60" x 48" x 32" posts, straight steel wheels

166

1 Lumber Cart
6' x 4' x 2' posts, heavy built

166A

Lumber Rack
50" x 8' with board stop

167

Self Dumping Hopper
54' x 60" x 32'

168

Self Dumping Hopper
6' x 5' x 40"

169

9 Lumber Carts
60" x 42" x 32" posts, (1) 48" wide, straight steel wheels

170

3 Strand Transfer Deck
9'6" x 21'6", heavy duty deck, electric drive

171

Precision Chipper
(1st of an entirety) Model: 58-15, SN: C-3379, 6 knives, pipe adapter

172

Neidec Electric Motor
(Part of an entirety) Includes WYE Delta Starter, cutout box, 150 hp, 1790 rpm, 445T frame

173

Precision Shaker Screen
(Part of an entirety) Size: 8 x 6, SN: S-1719, electric drive

174

Chip Cyclone with Pipe
(Part of an entirety) 4' cyclone, pipe to chipper

175

Precision Chipper Entirety of Lots 171-174
With 10% raise

176

Concave Belt Conveyor
41' x 52', 30" belt, electric drive

177

Harvest Handler Elevator
12' x 16', 6" pan, 5" paddles, electric drive

178

Webster Vibrating Conveyor
Model: FSH, size: 24-33, 38' with chipper chute, 24" pan, 10" sides

179

Webster Vibrating Conveyor
Model: F5H, 90' long 24" pan, 10" sides, size 24-33, electric drive

179A

Precision Vibrating Conveyor
28" x 55', 18" pan, 8" sides, 7.5 hp electric drive

179B

Precision Vibrating Conveyor
Model: 20FT, SN: V2354, 30" x 30', 18" pan, 8" sides, electric drive

180

Barn Sweep Conveyor
47" x 50', elevated, 18" paddles, electric drive

181

Precision Chipper
Completely rebuilt, SN: C-2996, Size 58-15, no pulley, 6 knives with knife jig

182

2018 Iseli RZI Auto Leveler/Tensioner
New in 2018!! Model RZI, SN: 844211, computerized auto leveler, wooden work platform, in good condition

183

Iseli BNP 100 Auto Band Sharpener
NEW IN 2018!! SN: 844221, computerized auto sharpener, dust collector unit, in good condition

184

Armstrong Back Clamp and Stands
Adjustable height, 4 stands one has feed cylinder

185

Armstrong Stretcher Roll
(1st of an entirety) #4, SN :56SR-133, electric drive

186

Armstrong Welding Clamp
(Part of an entirety) Model 62, #16 welding clamp

187

Armstrong Hammering Bench with Anvil
(Part of an entirety) 4" x 4' x 12" anvil, floor rolls, tools on bench

188

Armstrong Hammer Bench and Roller Entirety of Lots 185-187
With 10% raise

188A

Armstrong Anvil
12" x 48" x 4"

189

Precision Tub Grinder
Model 6K-440, SN: PAG945, 6 knife 20" capacity, 2 new extra stones, sump defoamer, electric drive

190

Simonds Chipper Knives and Bench
(18) 19 1/2' new knives, (6) 19 1/2" used knives, 24" x 48" workbench, shelf with parts

191

Jet Drill and Mill Machine
Model: JMD-18, SN: 1805552, set up to dress guides, carbide cutter, vacuum dust collector,

192

M+J Guide Dressing Machine
Sliding block holder, electric drive

193

Shelf with Guide Blocks
1 1/2' x 13" guide blocks, some new, contents of 2 shelves

194

Armstrong Swage and Shaper on Cart
#6900 shaper, Hanchett #54/55 swage air powered, 24" x 48' cart, contents of cart, parts for swage, new grinding wheels

195

Steel Work Table on Casters
42' x 33', 1/2" steel top

196

Belt Sander and Vise on Cart
36" x 23' steel cart, 1" x 30" belt-5" disc sander, 5" vise

197

Simonds 56' Circle Saw Blade
F style, new carbide teeth installed, good saw

198

Simonds 56' Circle Saw Blade
F style, new carbide teeth installed, good saw

199

Simonds 56' Circle Saw Blade
F style, new carbide teeth installed, good saw

200

Simonds 56' Circle Saw Blade
F style, new carbide teeth installed, good saw

201

Simonds 56' Circle Saw Blade
F style, new carbide teeth installed, good saw

202

Simonds 56' Circle Saw Blade
F style, new carbide teeth installed, good saw

203

Simonds 56' Circle Saw Blade
F style, new carbide teeth installed, good saw

204

42' Blade for Topsaw
42", P style, 2" arbor, new carbide teeth installed

205

Hanchett 408 L.H. Bandsaw Grinder
SN: 75, wheel size 10 x 5/8 x 5/8, band holding stands, some tools, extra wheels

206

Armstrong Roller and Bench
#2, SN: 13180, 6 1/2" x 36' x 1 3/4" anvil, tools, bottom rolls

207

Hanchett Air Swage
Model: 54/55

208

Hanchett Grinder and Shelf with Parts
Model: 06H grinder with Milwaukee drill, was rebuilt, new grinder wheel, 1 box of pipers carbide teeth, lots of Jockey grinder parts, 48" x 24' x 7' shelf, 6 box of lumber crayons

209

New Simonds Dominator Carbide Teeth
BF 8/9 9/32, 5 box 100 per box, plus part box

210

Simonds Stand-All Sawbits
BF 8/9 9/32, stand-all BT, 5 new boxes, 1 part, 1 box regular bits

211

Simonds Shanks
F 8 ga. Regular 3rd, 3 new boxes, 1 box 2nd, several part boxes

212

Marking Paint
33 cans green, 8 cans orange

213

Circular Saw Stand
Steel rack, 4 slots, saw working stand

214

Bolt Bin with Parts
34" x 48' x 12" deep, 2 tier bins, all controls

215

Air Nailers and Storage Cabinet
51' x 66" x 28" deep cabinet with 2 doors and shelves, Bostitch nailers, some staples, all parts in cabinet

216

Seat for Operators Cab
On pedestal, new seat

217

Bio Lube #2
2 new barrels, lube for bandsaw

217A

Pallet Jack

218

Sawmaster 32W Oil
1 part barrel, 1 empty barrel, 2 pumps

219

Poly Saw Guard
1 new part roll, lots of used

220

Misc. Lot
Towel dispenser, air hose, water hose, sprayer, chair, porter cable vacuum, 22" portable fan, broom, shovel

221

Torch Set with Tanks
Gauges and torches

222

1993 Atlas Copco Air Compressor
Model: GA45, SN: HOLO21037, Screw type compressor, duct work to outside, cut out box, no air lines, 60 hp electric motor

223

Electric Motor for Compressor
Fits lot 222, new motor 60 hp

224

Ingersoll Rand Air Compressor
Model: SSR-EP50SE, SN: G1017U92291, 198CFM, 50 hp electric motor, no air lines

224A

Vertical Air Tank
4' x 12', relief valve

224B

Air Lines
All air lines going to equipment not lotted with equipment, lots of 2 1/2' pipe

224C

Support Structure under Corley Mill
3/8" x 6" x 8' I beams plus braces, catwalk behind mill, no electrical or air lines

224D

Support Structure under Resaw and Runaround
Support structure and catwalk around resaw and runaround, no electrical or air lines, no control valves

224E

Support Structure under Decks and Catwalk
No electrical or air lines as marked, structural steel and catwalk, stairs, from log deck to mill to deck going to trimsaw on front side of mill, catwalk beside trimsaw

224F

Structural Steel
From break down line to trimsaw as marked, no air lines or electrical

224G

Electric Wires and Conduit in Building
Electric wires from main to cutout box to equipment, includes conduit but no boxes as marked, does not include 110 V pertaining to building

225

Ingersoll Rand Air Dryer
Pipe as marked

226

Ingersoll Rand Air Compressor
Model: SSR-EP25SE, SN: KE3147U96109, 95CFM, 25 hp electric motor, working condition

227

Van-Air Air Dryer
No air lines, Twin tank, electric controls

228

Select Sawmill Bandsaw
(1st of an entirety) 4" x 36" wheels, 32" wide opening, 4 post head frame, hydraulic carriage drive, double cut mill, computerized control station, 20 hp electric hydraulic unit, 75 hp electric on saw,

229

2 Strand Log Deck with Stop'N'Load
(Part of an entirety) Model: 4221D, SN: 28510500X115RS78, 6' x 13', 46" loading arms, hydraulic drive

230

3 Strand Transfer Deck
(Part of an entirety) 8' x 12' plus 4' drop section, electric drive

231

Morgan Board Edger
(Part of an entirety) 5" x 30" capacity, 26" x 44" infeed belt, 1 moving saw, 14' split saw blades, 26' x 44" outfeed belt, 30 hp electric motor, can be portable

232

Dust Conveyor
(Part of an entirety) 11" x 14'6", 6" pan, 8' sides, electric drive

233

Dust Conveyor
(Part of an entirety) 15" x 10', 9" pan, 7 1/2" paddles, 4" sides, chain type conveyor

233A

Dust Conveyor
18" x 24', 11" pan, with slide pan, electric drive

234

Bandsaw Blades
(Part of an entirety) 4" x 21' Double Cut bandsaw blades, 146 tooth, 11 pieces

235

3 Lumber Racks
(Part of an entirety) 8' x 4', 36" tall, board stop, slab rack 4' x 4', metal stand 4' x 20"

236

Banding Tools and Hand Tools
(Part of an entirety)Shovels, sledge hammer, axe, digging bar, banding tools, steel banding, dust rake, cant hook, bolt cutter

237

Delta 10" Power Miter Saw
(Part of an entirety)

238

Porter Cable Air Compressor
(Part of an entirety)150 max psi, 24 gallon tank

239

All Electrical to Mill
(Part of an entirety) Cutout boxes, motor starters

240

Entirety of Lots 228-239
With 10% raise

241

JD Turbo Power Unit
Model: 4045 TF275, SN: PE4045J004385, clutch, mount to be used on select bandsaw mill, in good condition

255A

Wheel Loader Forks
8 x 48" forks, 62" wide overall, quick attach

242

Corley 10 Head Drop Trimmer*
SN: DST-021, 9' x 24' overall, 7.5 hp electric motor on each head, 24" blades, air valves and cylinders. Contact Myron Nissley with any questions 574-536-2481

243

Cant Tipple with Frame*
16' long, 4' x 19' overall, air cylinder. Contact Myron Nissley with any questions 574-536-2481

256A

Wheel Loader Forks
8 x 48" forks, 62" wide overall, quick attach

244

2013 Wood-Mizer LT-70 Portable Sawmill*
VIN: 456D72419DNBB5906, meter reads, 10297 hours, does not have the trailer package, 30 hp electric motor-230/460 volt, 1 x 24" band wheels, includes 18 used 1 1/2" bands, 32" 8' landing table, Debarker attachment, log loading arm, has computerized setworks with joystick controls, includes trailer hitch but no axle. Good running machine. Contact Myron Nissley with any questions 574-536-2481

244A

Yanmar Diesel Engine*
Model: 3TNM74F-SAWM, SN: 006189, includes fuel tank, was used on Wood-Mizer EG200 edger. Contact Myron Nissley with any questions 574-536-2481

257A

Wheel Loader Forks
6 x 52" forks, 62" wide overall, quick attach

245

Ingersoll-Rand T30 Air Compressor*
Model: 234OL5, SN: 30T923383, 5 hp electric motor, 60 gallon vertical air tank

246

2-Strand Log Deck with Stop'n'Load*
80" x 22', 3' loading arms, hydraulic cylinders onloading arm, electric drive. Contact Myron Nissley with any questions 574-536-2481

258A

Wheel Loader Forks
6 x 52" forks, 62" wide overall, quick attach

247

WMMA 2-Blade Edger*
Shop # 66B21, 6 x 36" capacity, (2) 16" blades, 1 moveable, 30 hp electric motor, 42" x 92" dead roll table outfeed, 42 x 90" dead roll infeed. Contact Myron Nissley with any questions 574-536-2481

248

Belt Conveyor*
No drive, 6 1/2" belt, 8" pan, 4 1/2" sides, 12" x 28'

259A

Wheel Loader Forks
Quick attach, used on Volvo L60F, 6 x 54" forks, 50" wide

249

Self Dumping Hopper*
56 x 80 x 52" deep

249A

Self Dumping Hopper*
60 x 65 x 48" deep

260A

Volvo Loader Forks
SN: 26130003, Quick attach, 8 x 48" forks, 62' wide overall

249B

Self Dumping Hopper*
60 x 65 x 48" deep

249C

Self Dumping Hopper*
60 x 65 x 48" deep

250

Toyota Forklift*
Model: 8FDU30, SN: 10689, 5670 lb capacity, 21027 hours, has side shift, enclosed cab with fan and heater, needs 1 new door, diesel powered, 6.5-10 tires on rear, 28x9-15 tires on front, solid tires, 6 x 60" forks, 3 stage mast-90" tall. Good, running machine.

252

Toyota Electric Tow Truck*
Model: 7TB50-69209E, battery powered, includes charger, 24V

253

Toyota Electric Tow Truck*
Model: 8TB50-36074, 710 lb. maximum couples weight, battery powered, 24 V, includes charger

254

Toyota Electric Tow Truck*
SN: MVE00147504, model: 85P-13, 24 V battery, includes charger

255

2015 Cat 930M Wheel Loader
SN: CAT0930MLKTG00541
Meter reads: 16,834 hours
Engine: Cat C7.1 140kw (SN: D8T05363)
Fuel type: Diesel
ROPS: Enclosed
3rd Valve: No
Center to center of pins: 25"
Tire Size: 20.5R25
Attachments: 8 x 48" forks, 62" wide overall
Heater: Yes
A/C: Yes
Quick Attach: Yes

Features and Notes: Good running machine! Electronic display.

256

2015 Cat 930K Wheel Loader
SN: CAT0930KHRHN03883
Meter reads: 19,857 hours
Engine: Cat C7.1 Acert 152 hp
Fuel type: Diesel
ROPS: Fully enclosed
3rd Valve: No
Center to center of pins: 25"
Lift capacity: 28,948 lb. operating weight
Tire Size: 20.5R25
Attachments: 8 x 48" forks, 62" wide overall
Heater: Yes
A/C: Yes
Quick Attach: Yes

Features and Notes: Good running machine!

257

2021 Volvo L60H Wheel Loader
SN: VCEOL60HT0S622231
Meter reads: 3,096 hours
Engine: Volvo D6J-131 hp (SN: 1246061)
Fuel type: Diesel
ROPS: Fully enclosed
3rd Valve: Yes
Center to center of pins: 19"
Tire Size: 20.5R25
Attachments: 6 x 52" forks, 62" wide overall
Heater: Yes
A/C: Yes
Quick Attach: Yes

Features and Notes: Great running machine! Backup camera, pilot joystick controls

258

2020 Volvo L60H Wheel Loader
SN: VCEOL60HA0S622092
Meter reads: 2,692 hours
Engine: Volvo D6J-131 hp (SN: 12394366)
Fuel type: Diesel
ROPS: Enclosed
3rd Valve: Yes
Center to center of pins: 19"
Tire Size: 20.5R25
Attachments: 6 x 52" forks, 62" wide overall
Heater: Yes
A/C: Yes
Quick Attach: Yes

Features and Notes: Good running machine!

268

Case 580 Super M Backhoe
SN: JJG0284708, meter reads: 7,310 hours, 19.5-24 tires on rear, 13-16.5 tires on front, CNH 4 cylinder diesel engine rated at 95 hp, 30 x 82" front end bucket, 2' wide x 3' deep 5 tooth backhoe bucket. Good running machine. Photo available online

259

Volvo L60F Wheel Loader
SN: VCE0L60FK00061851
Meter reads: 34,615 hours
Engine: Volvo D6E-126 hp
Fuel type: Diesel
ROPS: Enclosed
3rd Valve: No
Center to center of pins: 19"
Tire Size: 20.5R25
Attachments: 6 x 54" forks, 50" wide overall
Heater: Yes
A/C: Yes
Quick Attach: yes

Features and Notes: Good running machine! Photo available online

260

Volvo L50B Wheel Loader
SN: L50BP9839
Meter reads: 32,764 hours
Engine: Volvo (SN: AB80644NT749463) rebuilt on 12/2014
Fuel type: Diesel
ROPS: Enclosed
3rd Valve: No
Center to center of pins: 17 1/2"
Tire Size: 17.5 R25
Attachments: 8 x 48" forks, 62' wide overall
Heater: Yes
A/C: Yes
Quick Attach: Yes

Features and Notes: Runs and operates well

260A

1985 John Deere 544C Wheel Loader
SN: DW544CD507622
Engine: 6 cylinder 414T, turbo charged
Fuel type: Diesel
ROPS: Yes, fully enclosed
3rd Valve: No 3rd valve
Tire Size: 17.5-25
Attachments: 104" bucket, 4' x 6" x 2" forks (one fork is stationary)
Heater: No
A/C: No
Quick Attach: No

Features and Notes: fuel gauge is broken, machine occasionally spits radiator fluid out of over flow when decelerating from a high rpm. comes with extra 17.5-25 tire and rim, engine runs strong, operates the way it should. Contact Myron Nissley with any questions 574-536-2481.

261

Case W14C Wheel Loader
SN: JAK0030258
Meter reads: 26,302 hours
Engine: 5.9 Cummins
Fuel type: Diesel
ROPS: Enclosed
3rd Valve: No
Center to center of pins: 25"
Lift capacity: Unknown
Tire Size: 17.5R25
Attachments: Pin through forks, 4 x 48" forks, 5' wide
Heater: No
A/C: No
Quick Attach: No

Features and Notes: Runs and operates as it should

264

1985 Case W11B Wheel Loader
SN: JAK0017289
Meter reads: 1,438 hours
Engine: Case
Fuel type: Diesel
ROPS: Enclosed, needs new door
3rd Valve: Yes
Tire Size: 15-19.5
Attachments: 6 x 42" forks, 58" wide
Heater: No
A/C: No
Quick Attach: Yes

Features and Notes: Has master disconnect switch. Runs and operates as it should.

264A

Case 455C Track Loader
SN: GBE0004375, meter reads: 3,718 hours, 14' tracks, Case diesel engine, 5 x 40" forks, 52" wide overall, pin through style forks, open cab. Runs and operates well

264B

Wheel Loader Bucket
Used on Volvo L50B, quick attach, 3' x 88"

264C

Wheel Loader Bucket*
Quick attach, 102" wide x 54" deep x 6' high

264D

Wheel Loader Bucket*
Quick attach, 4' x 104" x 5' tall

264E

Wheel Loader Bucket*
Quick attach, 38" x 8' x 42" tall

264F

Sawdust Bucket*
Quick attach, 4' x 8' x 4' tall

264G

Wheel Loader Forks*
Quick attach, 5 x 50" forks, 50" wide

264H

Jib Crane for Loader*
Fork pockets, 14' long, 9 x 38" plate on end, has tie-back chains

264I

Push Blade*
Quick attach, 18" x 10'

264J

Snow Blade*
Quick attach, 10' wide

265

2014 Cat D6N XL Dozer
SN: PER00487
Meter reads: 6,729 hours
Engine: Cat C6.6 Acert (SN: C8N13757)
Fuel type: Diesel
HP: 175 hp
Blade: 10'6" 6-way
ROPS: Enclosed
A/C: Yes
Heater: Yes

Features and Notes: 24" tracks, high track

266

2017 Case 850M WT Dozer
SN: JJGN850MEGC103124
Meter reads: 5,493 hours
Engine: Case 4.5L
Fuel type: Diesel
Blade: 112" 6-way
ROPS: Enclosed
A/C: Yes
Heater: Yes

Features and Notes: 20" tracks, tracks are in good condition, Allied H4A winch with 3/4" cable, 20201 lb operating weight, good running machine

267

2004 Volvo EC160BLC Excavator
SN: EC160V10370
Meter reads: 11,645 hours
Engine: Volvo D6D-EBE2-120HP (SN: 00915808)
Fuel type: Diesel
Bucket: 3' Geith tooth bucket
Hydraulic thumb: Yes
Heater: Yes
A/C: Yes

Features and Notes: 24" tracks, fully enclosed cab, starts right up and operates well.

267A

Excavator Bucket*
64" wide, 42" deep, single blade, 19" center to center on pins

302

Great Dane Flatbed Trailer
VIN: 1GRDM96204M702293, GVWR: 80000 lb., 295/75R22.5 tires, steel rims, 102" x 48'. Includes sliding straps, spare tire, and storage for cribbage blocks. Road ready

267B

Quest Excavator Bucket*
2' wide x 40" deep, 5 teeth, 19" center to center of pins

270

2017 International LT625 6x4 Semi Truck
VIN: 3HSDZAPR6JN401277
Meter reads: 747,719 miles
Engine: Cummins X15-450 hp
Transmission: Automatic
GVWR: 53,200 lb
Front axle rating: 13,200 lb
Rear axle rating: 20,000 lb/axle
Heat/AC:Yes
Wet kit: No

Features and Notes: 64" sleeper, 275/80R22.5 tires, aluminum brush guard. Great running truck.

271

2016 Peterbilt 589 Semi Truck
VIN: 1XPBD49X7GD354118
Meter reads: 771,242 miles
Engine: Cummins ISX15 450 hp
Transmission: Automatic
GVWR: 53,200 lb
Front axle rating: 13,200 lb
Rear axle rating: 20,000 lb/axle
Heat/AC: Yes
Wet kit: No

Features and Notes: 275/80R22.5 tires, 64' sleeper, aluminum brush guard. Very nice, great running truck.

272

2016 Peterbilt 589 Semi Truck
VIN: 1XPBD49X9GD354122
Meter reads: 724,126 miles
Engine: Cummins X15-450 hp
Transmission: Automatic
GVWR: 53,200 lb
Front axle rating: 13,200 lb.
Rear axle rating: 20,000 lb/axle
Heat/AC: Yes
Wet kit: No

Features and Notes: 275/80R22.5 tires, 64" sleeper, aluminum brush guard. Great running truck.

273

2016 Peterbilt 589 Semi Truck
VIN: 1XPBD49X7GD354121
Meter reads: 766,490 miles
Engine: Cummins X15-450 hp
Transmission: Automatic
GVWR: 53,200 lb
Front axle rating: 13,200 lb.
Rear axle rating: 20,000 lb/axle
Heat/AC: Yes
Wet kit: No

Features and Notes: 275/80R22.5 tires, 64" sleeper, aluminum brush guard. Very nice running truck.

274

2016 Peterbilt 589 Semi Truck
VIN: 1XPBD49XXGD354114
Meter reads: 603,640 miles
Engine: Cummins X15-450 hp
Transmission: Automatic
GVWR: 53,200 lb
Front axle rating: 13,200 lb.
Rear axle rating: 20,000 lb/axle
Heat/AC: Yes
Wet kit: No

Features and Notes: 275/80R22.5 tires, 64" sleeper, aluminum brush guard. Great running truck.

275

2016 Peterbilt 589 Semi Truck
VIN: 1XPBD49X9GD354119
Meter reads: 672,886 miles
Engine: Cummins X15-450 hp
Transmission: Automatic
GVWR: 53,200 lb
Front axle rating: 13,200 lb
Rear axle rating: 20,000 lb/axle
Heat/AC: yes
Wet kit: No

Features and Notes: 275/80R22.5 tires, aluminum brush guard, 64" sleeper. Great running truck!

276

2016 Peterbilt 589 Semi Truck
VIN: 1XPBD49X5GD354117
Meter reads: 935,443 miles
Engine: Cummins X15
Transmission: Automatic
GVWR: 53,200 lb
Front axle rating: 13,200 lb.
Rear axle rating: 20,000 lb/axle
Heat/AC: Yes
Wet kit: No

Features and Notes: 275/80R22.5 tires, 64" sleeper, aluminum brush guard. Great running truck.

280

1995 International 9400 6x4 Semi Truck
VIN: 2HSFHASRXSC022630
Meter reads: 917,895 miles
Engine: Cat 3406
Transmission: Spicer 10 speed
GVWR: 52,000 lb
Front axle rating: 12,000
Rear axle rating: 20,000
Heat/AC: Yes
Wet kit: No

Features and Notes: 48" sleeper, 11R22.5 tires. Good running truck. Photo available online

281

1997 Ford Dump Truck
VIN: 1FDZU90X1VVA12743
Meter reads: 89,883 miles
Engine: Cat 3406
Transmission: 8 speed Eaton
GVWR: 58,000 lb
Front axle rating: 18,000 lb
Rear axle rating: 20,000 lb
Heat/AC: yes
Wet kit: No

Features and Notes: Tri-axle, 425/65R22.5 tires on front, 275/80R22.5 tires on rear. 8' x 18' x 5' deep bed. Good running truck. Photo available online

282

1999 International 5000 Dump Truck
VIN: 1HTTGAHT4XJ002578
Meter reads: 484,280 miles
Engine: Cummins MII Plus
Transmission: 9 speed Eaton
Heat/AC: Yes
Wet kit: No

Features and Notes: 425/65R22.5 tires on front, 2 axles, 11R22.5 on rear 2, tri-axle. 8' x 16' x 6' tall bed. Good running truck. Photo available online

283

1999 International 4700 4x2 Flatbed Truck*
VIN: 1HTSCAAL7XH692903
Meter reads: 579,402 miles
Engine: DT 466E
Transmission: International 6 Plus
Heat/AC: Yes
Wet kit: No

Features and Notes: 254" WB, 11R22.5 tires, 8' x 26'6" flatbed with 52" tall guard behind cab, toolboxes mounted under bed. Good, clean running truck.

284

1996 International 4700 4x2 Flatbed Truck*
VIN: 1HTSCAAMXTH350932
Meter reads: 85,817 miles
Engine: DT 466E
Transmission: Eaton 6 speed
GVWR: 25,500 lb.
Front axle rating: 8,000 lb
Rear axle rating: 17,500 lb
Heat/AC: Yes
Wet kit: No

Features and Notes: 254" WB, 8' x 24'6" flatbed with 56" tall guard behind cab, 11R22.5 tires. Good, running truck

285

1978 Ford 9000 Semi Truck*
VIN: U91PVCF4183
Meter reads: 580,411 miles
Engine: Cummins TC-350 rated at 350 hp
Transmission: Fuller Roadranger 10 speed
GVWR: Approx. 45,000 lb
Heat/AC: No
Wet kit: No

Features and Notes: 295/75R22.5 tires, needs new battery, other than that runs good.

286

2005 International 4300 SBA 4x2 Semi Truck
VIN: 1HTMMAN55H126226
Meter reads: 387,962 miles
Engine: DT 466
Transmission: 8 speed Eaton Fuller
GVWR: 33,000 lb
Front axle rating: 12,000 lb
Rear axle rating: 21,000 lb
Wet kit: No

Features and Notes: 690" WB, 8' x 26'6" flatbed, boxes under bed, 295/75R22.5 rear tires, 275/80R22.5 front tires. Good, running truck.

287

2005 International 4400 6x4 Straight Truck
VIN: 1HTMSAAR85J005059
Meter reads: 399,811 miles
Engine: DT 466
Transmission: 10 speed Eaton Fuller
GVWR: 52,350 lb
Front axle rating: 12,350 lb
Rear axle rating: 20,000 lb
Heat/AC: Yes
Wet kit: No

Features and Notes: 256" WB, tandem axle, 8' x 28' flatbed, 11R22.5 tires, sliding straps, toobox under bed. Good, running truck.

288

1999 International 4900 Straight Truck*
VIN: 1HTSDAAM5XH679816
Engine: DT466E
Transmission: 6 speed Eaton Fuller
Meter reads: 275,231 miles
GVWR: 25,500 lbs.
GAWR front: 8,000 lbs.
GAWR rear: 17,500 lbs.

Features and notes: Has heat/AC, 8' x 26' flatbed, non CDL, good running truck

292

2000 Sterling Log Truck
VIN: 2F2XKWEBOYAF35650
Meter reads: not available
Engine: Cat C-12
Transmission: 8 speed Roadranger
Front axle rating: 18,000 lb
Rear axle rating: 20,000 lb/axle
GVWR: 58,000 lb
Heat/AC: Yes
Double frame: Yes

Features and Notes: 11R22.5 tires on rear, 385/65R22.5 steer tires, 8' x 20' bed, 90" x 7' tall bunks. Good running truck. Photo available online

293

2003 International 5600i 6x4 Log Truck
VIN: 1HTXHAPT83J081621
Meter reads: 482,080 miles
Engine: Cummins X15-450 hp
Transmission: 8 speed Eaton
Log loader: None
GVWR: Approx. 50,000 lb
Heat/AC: Yes
Full lock in rears: No
Double frame: Yes

Features and Notes: 11R22.5 tires, 8' x 17' bed, 7' x 6' tall bunks. Good running truck. Photo available online

294

1997 Ford LTL 9000 Log Truck
VIN: 1FDZA90W6VVA28176
Meter reads: 962,444 miles
Engine: Cat
Transmission: 10 speed Eaton
Log loader: None
Suspension: Hendrickson
Front axle rating: 14,060 lb
Rear axle rating: 23,000 lb
GVWR: 60,000 lb
Heat/AC: Yes
Full lock in rears: No
Double frame: Yes

Features and Notes: 8'4" x 19' bed, 92" wide x 70" tall bunks, 11R22.5 tires. Good running truck. Photo available online

295

1986 Ford LTL 9000 Log Truck
VIN: 1FDYA92W6GVA31865
Meter reads: 591,865 miles
Engine: Cummins NTC-350
Transmission: 8 speed Eaton
Log loader: None
Suspension: Hendrickson
GVWR: 50,000 lb
Heat/AC: No
Full lock in rears: No
Double frame: Yes

Features and Notes: 11R22.5 tires, 8' x 20' log bed, 82" tall x 88" wide bunks. Runs good. Photo available online

296

2000 Sterling Log Truck
VIN: 2FZXKWEB1YAF34085
Meter reads: 556,656 miles
Engine: Cat C-12
Transmission: Roadranger 8 speed
Log loader: None
Suspension: Spring Leaf
Front axle rating: 18,000 lb
Rear axle rating: 20,000 lb/axle
GVWR: 58,000 lb
Full lock in rears: No
Double frame: Yes

Features and Notes: 80' x 20' log bed, 7' x 7' log bunks, 425/65R22.5 tires on front, 11R22.5 tires on rear. Starts and runs good.

297

1996 Ford L9000 Log Truck
VIN: 1FDZU90T7TVA11476
Meter reads: 556,296 miles
Engine: Cat 3306
Transmission: Eaton Fuller 8 speed
Log loader: None
Suspension: Leaf Spring
Front axle rating: 16,000 lb
Rear axle rating: 20,000/axle
GVWR: 56,000 lb
Heat/AC: No
Full lock in rears: No
Double frame: No

Features and Notes: 11R22.5 tires on rear, 385/65R22.5 on front, 8' x 20' flatbed with log bunks, 89" wide x 82" tall bunks. Starts and runs strong!

298

1996 Ford L9000 Log Truck
VIN: 1FDZY90X7TVA13798
Meter reads: 119,419 miles
Engine: Cat 3406 350hp (SN: 8PN06836)
Transmission: Eaton Fuller 8 speed
Log loader: None
Suspension: Leaf Spring
Front axle rating: 18,000 lb.
Rear axle rating: 20,000/axle
GVWR: 58,000 lb
Heat/AC: No
Full lock in rears: No
Triple frame: Yes

Features and Notes: 8' x 19' log bed, 7' x 7' log bunks, has pintle hitch and trailer brakes for pup trailer, 385/65R22.5 tires on front, 11R22.5 tires on rear axles. Starts and runs good.

298A

Log Bed for Truck*
98" x 17' long, bunks are 7' wide x 80" tall

299

1994 Ford L9000 Water Truck
VIN: 1FDZU90L2RVA52767
Meter reads: 361,702 miles
Engine: Cummins L10 280hp
Transmission: 8 speed manual
GVWR: 64,000 lb
Front axle rating: 18,540 lb
Rear axle rating: 46,000 lb
Heat/AC: No
Wet kit: No

Features and Notes: 246" WB, air brakes, 64" x 12' tank, multi quip 3" trash pump powered by Honda GX240 motor, includes hoses, pump works well, 11R22.5 tires on rear, 385/65R22.5 steer tires, good running truck

299A

2007 Chevrolet C4500 Work Truck*
VIN: 1GBE4C1257F403401, GVWR: 17500 lbs., meter reads: 386000 miles, 2WD, Duramax diesel, automatic transmission, single cab, has heat/AC, 8' x 12'6" flatbed with 2" hitch receiver, gooseneck hitch, (2) 20" x 6' aluminum toolboxes, spare tire, 225/70R19.5 tires, approx. 150000 miles on LB2 Duramax, approx. 20000 miles on new Jasper transmission, full service done within month of auction, new gooseneck plate and ball. Good running truck. Contact Myron Nissley with any questions 574-536-2481

300

2004 Great Dane Flatbed Trailer
VIN: 1GRDM96284M702199, 8' x 48', 295/75R22.5 tires, includes sliding straps and box for cribbage blocks

301

2004 Great Dane Flatbed Trailer
VIN: 1GRDM96264M702315, 8' x 48', 295/75R22.5 tires, sliding straps, cribbage block box

302

2001 Transcraft Flatbed Trailer*
VIN: 1TTF4820X12007610, 8' x 48', 4' tall guard on front, includes all sliding straps, 285/75R24.5 tires, toolbox under deck

303

2005 Fontaine Flatbed Trailer with Log Bunks*
88" x 55" tall bunks, 6 bunks, includes sliding straps, spare tire, 295/75R22.5 tires, under deck box for cribbage blocks

303A

1998 Fruehauf Flatbed Trailer*
VIN: 1JJF482F7WS487538, GVWR: 100000 lb, 101" x 48', 295/75R22.5 tires, includes sliding straps, toolboxes under deck

303B

2004 Great Dane Flatbed Trailer*
VIN: 1GRDM96264M702282, GVWR: approx. 80000 lb, 101" x 48', 295/75R22.5 tires, includes all sliding straps, spare tire, box for cribbage blocks under deck

303C

2004 Great Dane Flatbed Trailer*
VIN: 1GRDM96204M702293, GVWR: approx. 80000 lb, 101" x 48', 295/75R22.5 tires, includes sliding straps, spare tire, storage box for cribbage blocks under deck

303D

2000 Fontaine Step-Deck Trailer*
VIN: 13N24830XY5994335, 100" X 10' upper deck, 22" drop, 38' main deck, 48' long overall, GVWR: approx 80000 lb., 255/70R22.5 tires, includes sliding straps, box for cribbage blocks under deck

303E

2004 Great Dane Flatbed Trailer*
VIN: 1GRDM96205M701064, GVWR: 71000 lb, 101" x 48', 295/75R22.5 tires, includes sliding straps and storage for cribbage blocks under deck

303F

1992 Oshkosh Flatbed Trailer*
VIN: 4MLP24828NB615001, GVWR: 80000 lb., 101" x 48', 295/75R22.5 tires, includes sliding straps, spare tires, storage for cribbage blocks under deck

303G

2006 Fontaine Drop-Deck Trailer*
VIN: 13N25330863538309, 101" X 10' top deck, 43' main deck, 53' long overall, 255/70R22.5 tires, sliding straps, toolbox and cribbage block storage under deck

303H

2009 Fontaine Drop-Deck Trailer*
VIN: 13N24820391549994, 101" X 48', 10' top deck, 38' main deck, 48' overall, GVWR: 69278 lbs., 255/70R22.5 tires

304

1987 Fontaine Lo-Boy Trailer*
SN: 9916, 9'7" x 23'6" main deck, 30" x 9' ramps, 35' long overall, 245/70R17.5 tires

305

2005 Peerless Open Top Chip Trailer
VIN: 1PLE045275PK54209, 45' long, 11R22.5 tires, 92" inside width, 98" inside height

306

2006 Peerless Open Top Chip Trailer
VIN: 1PLE045215PG54871, 45' long, GVWR: 65,000 lb., 275/80R22.5 tires, 92" inside width, 98" inside height, has a spare tire

307

2012 Peerless Open Top Chip Trailer
VIN: 1PLEO4525CPF57427, 45' long, GVWR: 65,000 lb., 295/75R22.5 tires, 92" inside width, 98" inside height, has spare tire

308

2005 Peerless Open Top Chip Trailer
VIN: 1PLE045225PE54467, 45' long, 275/80R22.5 tires, 92" inside width, 98" inside height, GVWR: 65,000 lb., has spare tire

309

2009 Peerless Open Top Chip
VIN: 1PLEO45239PF56284, 45' long, GVWR: 65,000 lb, 11R22.5 tires, 92" inside width, 98" inside height, has spare tire

310

2005 Peerless Open Top Chip Trailer
VIN: 1PLE045255PK54208, 45' long, GVWR: 65,000 lb., 275/80R22.5 tires, 90" inside width, 98" inside height, has spare tire

311

2012 Peerless Open Top Chip Trailer
VIN: 1PLEO4523CPF57426, 45' long, GVWR: 65,000 lb., 275/80R22.5 tires, 92" inside width, 98" inside height, has spare tire

312

1990 Fruehauf Van Trailer*
VIN: 1H5V05320LM044569, GVWR: 68000 lb., 53' long, 295/75R22.5 tires, 99" inside width, 110" inside height

313

2005 Peerless Open Top Chip Trailer*
VIN: 1PLE045245PE54468, GVWR: 65000 lb., 45' long, 275/80R22.5 tires, 91" inside width, 98" inside height

314

1997 Trailmobile Van Trailer*
VIN: 1PTOIJAH7V6003294, GVWR: 65000 lb., 53' long, 11R22.5 tires, 99" inside width, 110" inside height

315

1997 Trailmobile Van Trailer*
VIN: 1PTOIJAH7V6003330, GVWR: 65000 lb., 53' long, 295/75R22.5 tires, 99" inside width, 110" inside height

316

1974 Fruehauf Van Trailer*
VIN: CHS193313, 48' long, 295/75R22.5 tires

317

1969 Fruehauf Van Trailer*
VIN: MAK202601, 40' long, 11R22.5 tires, 92" inside width, 98" inside height, includes tires and rims in trailer

318

1998 Great Dane Van Trailer*
VIN: 1GRAA0621WB181008, GVWR: 65000 lb., 53' long, 295/75R22.5 tires, 99" inside width, 108" inside height, includes all contents, tires, engine parts, hoses, filters, trailer and truck parts, etc.

318A

1988 Fruehauf Van Trailer*
VIN: 1H2V05320JE003976, GVWR: 68000 lb., 53' long, 295/75R22.5 tires, 100" inside width, 109" inside height

319

2000 Hyundai Van Trailer*
VIN: 3H3V532C4YT092019, GVWR: 65000 lb, 53' long, has spare tire, 295/75R22.5 tires, 99" inside width, 110" inside height

319A

2000 Hyundai Van Trailer*
VIN: 3H3V532C6YT091003, GVWR: 65000 lb., 53' long, 275/80R22.5 tires, 99" inside width, 110" inside height

319B

1984 Fruehauf Van Open Top Trailer*
VIN: FD9205, GVWR: 67200 lb., 40' long, 295/75R22.5 tires, 96" inside width, 7' inside height, includes all pallets in trailer, some good-some broken, includes spare tire

320

Log "Pup" Trailer
25' long, 90" wide x 60" tall bunks, pintle hitch, air brakes, 255/70R22.5 tires. Photo available online

321

Log "Pup" Trailer
93" x 60" tall bunks, 25' long, 102" x 54" dovetail, pintle hitch wit air brakes, 255/70R22.5 tires. Photo available online

322

1988 Trailmobile Log Trailer*
VIN: 1PTF71TJ2J9002832, GVWR: 65000 lb. GAWR: 20000 lb., 6 bunk, 40' long, includes all straps, 275/80R22.5 tires, bunks are 91" x 5' tall

329

2017 Chevrolet Silverado 1500 Pickup Truck*
VIN: 1GCVKPEC7HZ129842, GVWR: 7200 lb, 4WD, 269558 miles, Bluetooth radio, electronic display, double cab, 7' bed, automatic transmission, 5.3L Vortec engine. Good, running truck.

330

2000 Chevy K2500 Service Truck
VIN: 1GBGK24R6YR221496
Meter reads: 191,404 miles
Engine: 5.3L Vortec gas engine
Transmission: Automatic

Features and Notes: 80" x 8' service bed with fluids, hand tools, fittings, parts, welding rods, overhead rack, cutting torch with tanks and leads. Miller Bobcat 225T 8000 Watt generator/welder, 6 1/2" bench vise. Runs and starts good.

331

2005 Chevrolet Silverado Pickup Truck
VIN #: 1GCHK24U15E344291
Mileage: 252,370 miles
Body Type: Single cab
Drive Line: 4WD
Engine Type: 6.0L Vortec engine
Fuel Type: Gasoline
Transmission: Automatic

Features and Notes: Long bed, runs and drives good. Includes stainless tool box. Does not include transfer fuel tank in pictures.

332

2007 GMC Sierra 1500*
VIN: 1GTEC14CX7Z562162, GVWR: 6400 lb., meter reads: 177303 miles, 2WD, single cab, short bed, 4.8L Vortec engine, auto transmission, AC/Heat works great, includes toolbox. Good running pickup

333

2006 Chevy Silverado 2500 HD*
VIN: 1GCHK24U66E108270, GVWR: 9200 lb., meter reads: 246417 miles, 6.0L Vortec engine, 4WD, auto transmission, single cab, includes tool box. Does not include fuel tank in pictures. Good running truck, AC works great!

334

2010 Chevrolet Silverado 1500 Pickup Truck*
VIN: 1GCSKPE3XAZ178154, GVWR: 7000 lb, meter reads: 305,097 miles, 4WD, auto transmission, 5.3L Vortec engine, extended cab, 7' bed, 2" hitch recievers front and back. Good, running pickup

338

2009 Toyota Tacoma*
VIN: 5TENX22N89Z639570, GVWR: 4650 lb., meter reads: 273299 miles, single cab, short bed, 2WD, auto transmission, 2.7L 4 cylinder engine. Good running pickup

340

Cosmo Flail Mower*
Model: FL 145, SN: 18048079, made in 2018, 60" wide, pto and 3 point hitch

341

Shaktiman Roto-Tiller*
Model: UM72, SN: AGBI101113039, made in 2018, 6' wide, pto hookup

342

Shaktiman Roto-Tiller*
Model: UM72, SN: AGBI101113038, made in 2018, 5' wide, pto hookup

343

Frontier Hay Mower*
SN tag missing, pto hookup and 3 point hitch, hydraulic cylinder for control, 8'6" cutting head width

344

Ideal Pull Behind Post Pounder*
Kohler 14 hp gas motor, hydraulic controls and cylinders, ST225/75R15 tires, pin through hitch, has rack for holding posts, good condition

345

Ideal Post Pounder Attachment*
Standard skid steer quick attach and hydraulic controls, 10 x 21 x 12" hydraulic tank. In good condition

346

Ideal Post Pounder Attachment*
Standard skid steer quick attach and hydraulic controls, 10 x 21 x 12" hydraulic tank. In good condition

347

90" Snow Pushing Box Blade*
Standard skid steer quick attach, made with 1/4" steel

348

90" Snow Pushing Box Blade*
Standard skid steer quick attach, made with 1/4" steel

350

Electric Motors
(4) 25-30 hp, 286T frame, 1470-1780 rpm

351

Howard Electrical Transformer
120/240 V, 240/480 V

352

Electric Motors
(1) 75 hp, 1780 rpm, 365T frame, 230/460V, (1) 20 hp, 256T frame, 3510 rpm at 230/460 V

353

Electric Motors
8 total, 1-20 hp, bearings included

354

Electric Motors
(1) 25 hp, 1180 rpm, 324T frame, (1) 7.5 hp, 213T frame, 1760 rpm, 460 V

355

Electric Motors
9 total, 1.5-5 hp

356

Electric Motor
40 hp, 324T frame, 230/460V

357

Electric Motors
7 total, (2) 5 hp 184T frame, (5) no tags-approx. 5 hp

417

Shop Press
Self contained hydraulic unit, assorted blocking

358

Electric Motors
(2) 25 hp, 284T frame, 460 V

359

New Electric Motor
5 hp, 182/4T frame, 1730 rpm, 230 V

360

Square D 3 PH Transformer
75 KVA

361

Lincoln Electric Motor
150 hp, 444T frame, 460 V, 1780 rpm

362

Lincoln Electric Motor
100 hp, 1780 rpm, 460 V, 405T frame

363

Pallet of Motor Frames

364

Electric Motors
(1) no tag-approx. 30 hp, (1) 1 hp, 143TC frame, 1725 rpm, 460 V

365

Electric Motors
(1) 60 hp, 1780 rpm, 460 V, 364T frame, (1) 30 hp, 1760 rpm, 286T frame, 460 V

366

Electric Motors
(1) 50 hp, 1780 rpm, 326T frame, (1) 30 hp, 1760 rpm, 285T frame, (1) 40 hp, 460 V, 1780 rpm, 324T frame

367

Electric Motors and Gearboxes
(1) 3 hp with gearbox, (1) 5 hp with 6:1 gearbox, (1) 5 hp, 1740 rpm, RX184T frame

368

Electrical Parts
3 crates of switches and breakers

369

Banding Cart
Partial roll of 3/4" steel banding on cart, includes 3/4 box of clips and full roll of 3/4" banding

370

Pallet of Pulleys, Sprockets and Bushings

371

pallet of Electric Motors and Gearboxes
1-5 hp, 4 motors

434

Flat Conveyor Belt
3/8' x 30' length unknown

372

Pallet of Gearboxes

373

Pallet of Air Parts
Air hoses, fittings, filters, compressor parts

374

Pallet of Paint Materials
Spray paint, paint cans, rollers, tray

375

Pallet of Misc. Parts
Conduit fittings, cylinders, hydraulic pump, oil pump, electrical components

376

Pallet of Hydraulics
Pumps, hoses, fittings, valves

377

Banding Tools
3 crimpers, 2 strapping tools

378

Pallet of Electricals
Lights, pedal controls, wiring, breakers, fuses, switches

379

Pallet of Assorted Bearings

379A

Husk Wrenches
1 wrench, 2 tooth setters, 1 crowbar

380

10 Cubic Yard Wheelbarrow

381

Wheelbarrow
30 x 36' x 2 wheeled

382

Pallet of Husqvarna Chainsaw Parts
Oil pump, router table

383

Pallet of Misc. Parts
Motor and gearbox mounting plates, 7.5 hp motor, rollers

384

Crate of Belts
Lots of new belts, for misc. equipment in sawmill

385

Pallet of Belts
Lots of new belts, for misc. equipment in sawmill

386

Trash Pump
3" Yamaha pump powered by 300 cc Yamaha motor, includes hose and fittings, small 110 V sump pump

387

Pallet of Castors
2 rolls of H78 chain, wheels, 2 hydraulic pumps

388

3 Chip-Chute Adapters
Fit precision chipper

389

Electric Motor
150 hp, 460 V, 1780 rpm, 445T frame

390

Electric Motor
50 hp, 230/460 V, 1780 rpm, 326T frame

391

Electric Motor
No tag on motor, estimate 50-100 hp

392

Pallet of Ladder Back Chain
12" chain and rollers for log trough

393

Head for Morbark Debarker
Main cutting head, includes covers

394

3 Drum Debarker Heads
For Morbark debarker, all 16 x 20"

395

New Conveyor Belt
Cleated, 30" wide, length unknown

396

New Conveyor Belt
Cleated, 36' wide, length unknown

397

Conveyor Belts
(1) 48", (1) 36" cleated, lengths unknown

398

Conveyor Belts
4-29" widths, lengths unknown

399

Conveyor Belts
(4) 30" wide, (1) 28" wide, lengths unknown, like new condition

400

Conveyor Belts
(1) 60", (1) 30", (1) 16" cleated, lengths unknown

401

Hand Tools
2 Shovels, 2 brooms, scraper, cant hook

402

Hand Tools
2 Shovels, 2 brooms, scraper, cant hook

403

Hand Tools
2 Shovels, 2 brooms, scraper, cant hook

404

Hand Tools
Shovels, brooms, cant hook, 6' step, 300 lb. capacity ladder

404A

Bucksaw Rack
5' x 10', good condition

404B

3/4" steel Banding
12 full rolls of new banding

404C

Stacking Rack
16 x 60 x 54" tall

405

Wheelbarrow
Single wheel

406

Wheelbarrow
2 wheeled

407

Barn Sweep Paddles and Chain
18" paddles

408

Poly Deck Strips and Metal Bracing
(8) 32" long braces, 1/2-3/4" thick poly

409

Rack with Angle Iron

410

Rack with Flat Steel

411

Rack with Scrap Shafts
30 x 30 x 42" rack

412

Crate of Roller Chain

413

Pallet of H78B Chain

414

Pallet of Chain
15 rolls of H78, 2 rolls of regular chain

414A

Fuel Tank on Stand
38' x 5' long, on stand bolted to skid, 43 x 68 x 70" tall overall

414B

JET Metal-Cutting Bandsaw*
110 plug-in, on castors

414C

Lemas Metal Bender*
Model: LH-3RS, SN: 329025, made in 2007, capacity 75 x 75 x 9.0, electric drive, portable control stand, electric box, hydraulic cylinder

414D

Portacool Fan*
110 Plug in, water hookups, has water pump, 40 x 75 x 85" tall, 48" fan, 2 speed

414E

Horn Bend Pro G2 Horizontal Tube Bender*
Bends up to 3" pipe, includes operator's manual, (2) 480 V electrical boxes, computerized control panel, 40 hp electric motor with hydraulic pumps, valve station and cooling unit, 7' x 22' overall, buyer will need to arrange loadout by appointment. Good, working machine just no longer in use.

415

Pallet of Paddle Chain
34" wooden paddles

416

Pallet of Chain
Roller chain, H78B, chain with pegs

418A

5 HP Hydraulic Pack*
32 x 16 x 16" tank, cooling unit, valves, electric box

418B

Rousselle 6F Press*
SN: 16960, Tonnage 60, 3 stroke, 12 1/2" shut height, 75-150 strokes/min electric drive, 460V cutout box

418C

Steel Break*
Electric drive, 6' wide

418D

Willis-Bergo Radial Arm Drill Press*
4 prong plug in, 30 x 78 x 80" tall, 6 speed, good condition

419

New Shaft Stock
(1) 2 1/8" x 10', (1) 1 15/16" x 4', (1) 2 15/16' x 12', 2 short pieces

420

Barrel Dolly Motor Oil
15 gallon Morlina oil SD220, Barrel dolly

421

Tivar, Sawhorses, and Steel Wear Plate
(1) 1/2" x 4' x 8', (1) 1/2" x 3' x 8', (1) 3/4" x 32" x 8', (1) 3/4" x 7" x 8', 13' steel wear plate, 4' sawhorses

422

Cant Hook and Air Hose
3 air hoses, 48" cant hook

423

Brooms, Shovels, and Scraper
5 brooms, 9 shovels, 1 scraper

424

Louisville Step Ladder
Fiberglass 8' ladder

425

Shop Hoist 1/2 Ton
SM-01, 110 V

426

Rack wit Shaft Stock
Several pieces, 1 15/16" x 12', assorted shaft pieces

427

Board Stops
For deck on resaw runaround

428

Parts Lot
New seat for cab, V belts, 1/2" air hose

429

Steel Crate with Parts
7" flat 3 piece length unknown, gearbox, air cylinder, bolts

430

Wire Create with Parts
Flat belt, assorted parts

431

Shell Hydraulic Oil
S2MX46, 1 new barrel, 2 barrels with pumps-feel full, spill box

432

New Barrels
(1) barrel Shell Rotella TI SAE 10W motor oil, (1) barrel Shell Tellus S2 MX 46 hydraulic oil, (1) barrel Anchor seal 2 summer formula

433

Wire Create
V belts, 40' x 40" crate, 1/2" x 52" x 35"

435

Barrel Lift
Slips on forks

436

Cabinet with Parts
6' x 72' x 26", assorted new sprockets

437

Extension Cord
4 wire cord with plugs

438

Guard Fence
70" high, 2-54" section with door, (1) 10', (1) 54'

439

Hoist A-Frame
116' inside, adjustable height 7' to 11'

440

Cox Reels, Air Hose Reel, and Cord Reel
Retracting reel, includes hose, extension cord on reel

441

Barrel Hydraulic Oil with Pump
Spill tray, hand pump, full barrel, shell S2MX32

442

Floor Stand Fan
18" electric drive

443

Storage Box
48' x 24' x 24', steel box, all contents

444

Corley Parts for Carriage and Husk
Dogs for carriage, bearings for carriage, cant kicker cylinders, computer control board, saw guides, Joystick handle, air valves

445

Corley Resaw Parts
New shaft and bearings for top wheel, air cylinders, air valves, new cylinder and control valve for line bar feed, hydraulic motors, assorted filters and parts

446

Edger Parts Log Turner Cylinder
Sliding bearings for edger, new shaft for edger, cylinders for bar turner, encoders, saw guide blocks

447

Morbark Debarker Parts
Hydraulic cylinders, motors, valves, relief valves, filters, drum spikes, lots of new parts

448

Slab Dump Parts
(2) air cylinder, 8" bore 12" stroke, new 3/8" x 30" belt for slab dump, seal kit, (1) 24" belt no lacing

449

Precision Chipper Parts
(3) new bearings, new knife holders, counter knives, knife clamps, anvils, paddles, bolts, swivel rod ends, anvil plate, probably enough parts to redo 3 chippers

450

Flexco Belt Lacing Tool and Parts
Toolbox with tools and parts, lots of lacing supplies

451

Electric Motors and Gearbox
2 motors special order for edger, browning 1.5 p with gearbox, Nema 5 hp motor

543

Hydraulic Pumps and Gearbox
New Quantis gearbox used on resaw, new Vickers pump for debarker, Vickers pump PUB45A RSF 10 CAII-387539, tension bars

544

Laser Lights, Volvo Parts, and Tempasonic Rod
4 new Laser Blazer lights, 2 used lights, Volvo pins, light, door latches, 1 new Tempasonic rod

545

Heaters, Lamps, Chipper Blade Grinder
9 electric heaters, heat lamps, DeWalt chipper blade grinder with discs

546

Hose Supplies and Hand Tools
DeWalt saws, 1/2" Milwaukee impact, assorted hoses

547

Webster Vibrating Conveyor Drive and Parts
New drive for Webster conveyor, bushings for Precision conveyor, 30" planer knives, new bearing Dodge FC-S2-215RE 2 15/16'

567

Miller Welder
Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads

548

Cylinders and Parts
New air cylinder for cant pusher 6" bore 40" stroke, cylinder for carriage

568

Miller Welder
Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads

549

Schneider Starter and Parts
Schneider soft start used on Corley resaw, wiring for resaw, Toggle switches,, grease guns, panel for Trimmer control, air foot valve

550

Hubs and Sprockets Bearings
Lots of new Sprockets, Timken bearings

570

Miller Welder
Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads

594

Loader Tires
Michelin, XHA2, 3 new tires, 20.5/R25 tires, 1 used may need patched

551

Split Sprockets and Hubs
Lots of new hubs and sprockets

571

Miller Welder
Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads

552

Tsubaki Roller Chain and End Evener Web Parts
(2) 100D Tsubaki chain (extra hard), steel web for end evener, plus sprockets, Morbark debarker shield

553

Domestic Brisk II AC Unit
New rooftop air conditioner unit, 3 7/16" x 38" debarker shaft

573

Miller Welder
Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads

554

Morbark Debarker Head and Cart
Debarker head 32" shaft, 48" x 24" cart on wheels, fall restraint harness

555

Shop Cart on Wheels
40" x 18", all contents

556

Parker Carriage Drive Pump
Connector bushing, fan pulley

557

Parker Hydraulic Motor Carriage Drive
New motor for carriage drive, LB 31878

558

Oil and Air Filters
Assorted filters on skid

559

Roller Chain
Lots of new roller chain, assorted sizes

560

Tire Changer Cordless Grease Guns
Lots of hand tools, DeWalt grease gun, Milwaukee grease gun, portable air over hydraulic tire changer

561

Buck Saw
6', extra blade and chains

562

2 Mandrel Shaft
2 15/16" x 11' with 8" collar, same on Corley mill, 2 7/16" x 11' with 8" collar, new shafts

562A

Information Lot
The following welders were taken out of production at Tarter Gate and were functioning properly when removed from production.

563

Miller Welder
Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads

564

Miller Welder
Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads

565

Miller Welder
Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads

566

Miller Welder
Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads

569

Miller Welder
Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads

572

Miller Welder
Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads

574

Miller Welder
Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads

575

Miller Welder
Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads

576

Miller Welder
Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads

577

Miller Welder
Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads

578

Miller Welder
Model: CP-302, SN: MC280244V, 5 pieces, 300 amp output, 3 ph electric, no wire feed unit

579

Miller Welder
Model: CP-302, SN: MC280244V, 5 pieces, 300 amp output, 3 ph electric, no wire feed unit

580

Miller Welder
Model: CP-302, SN: MC280244V, 2 pieces, 300 amp output, 3 ph electric, no wire feed unit

581

Miller Wire Feed Units
60 series, (1) 75 series, most units tested ok

582

Tweco Mig Welding Gun
2 Welding guns, torch hose, shield

583

Miller Welder
Model: CP-302, 300 amp output, 3 ph electric, 60 series wire feeder, 588-70 series, 590-70 series

584

Miller Welder
Model: CP-302, 300 amp output, 3 ph electric, 60 series wire feeder, 588-70 series, 590-70 series

585

Miller Welder
Model: CP-302, 300 amp output, 3 ph electric, 60 series wire feeder, 588-70 series, 590-70 series

586

Miller Welder
Model: CP-302, 300 amp output, 3 ph electric, 60 series wire feeder, 588-70 series, 590-70 series

587

Miller Welder
Model: CP-302, 300 amp output, 3 ph electric, 60 series wire feeder, 588-70 series, 590-70 series

588

Miller Welder
Model: CP-302, 300 amp output, 3 ph electric, 60 series wire feeder, 588-70 series, 590-70 series

589

Miller Welder
Model: CP-302, 300 amp output, 3 ph electric, 60 series wire feeder, 588-70 series, 590-70 series

590

Miller Welder
Model: CP-302, 300 amp output, 3 ph electric, 60 series wire feeder, 588-70 series, 590-70 series

591

5 Miller Welder
Model: CP-302, 300 amp output, 3 ph electric, no welding leads, no feed unit

592

Miller Welder
Model: CP-302, 300 amp output, 3 ph electric, no welding leads, no wire feed unit

592A

Miller Welder*
Model: CP-302, no SN tag, 4 prong plug,

592B

Miller Welder*
Model: CP-302, SN: LC456392, Miller 60 series, wire feeder, 4 prong plug

592C

Miller Welder*
Model: CP-302, SN: LG280145C, 200/230/460V, 4 prong plug

592D

Miller Welder*
Model: CP-302, SN tag is missing, 200/230/460V, 4 prong plug, Miller 70 series 24 V wire feeder

592E

Miller Welder*
Model: CP-302, SN: KK303259, 200/230/460V, 4 prong plug, Miller 70 series 24 V wire feeder

592F

Miller Welder*
Model: CP-302, SN: LB089213, 200/230/460 V, 4 prong plug, Miller 70 series 24 V wire feeder

592G

Miller Welder*
Model: CP-302, SN: ME130125V, 200/230/460V, 4 prong plug, Miller S60 24V constant wire feeder

592H

Miller Welder*
Model: CP-302, SN: LF430122C, 200/230/460V, 4 prong plug

592I

Miller Welder*
Model: CP-302, SN: ME130417V, 200/230/460V, 4 prong plug

592J

Pallet of Brand New Gates Hydraulic Hoses*
1/2" hoses with fittings

592K

Steel Pins*
(160) 1 1/4 x 5", (111) 1 1/4" x 7"

592L

Bolts and Fittings*
(1,000) 1/4" hydraulic fittings for skid steer attachments, (200) 1 1/4" x 9 1/2" bolts with 1 7/8" head

593

Pallet of New Attachment Parts*
Spindles, nuts, and studs for skid steer attachments

593A

Pallet of New Hydraulic Cylinders*
(Approx. 60) 24", for skid steer attachments,

593B

Pallet of New Attachment Parts*
Spindles and nuts for skid steer attachments

593C

New Hydraulic Valve Stations*
15 pieces

593D

New Hydraulic Cylinders*
(70) 24", for skid steer attachments

593E

Plate Steel*
(420) 3/8" x 12" x 12"

593F

Plate Steel*
(168) 3/8 x 12 x 12"

593G

Plate Steel*
(280) 12 1/2 x 49"-14 gauge

593H

Plate Steel*
(140) 12 1/2 x 49"-14 gauge

593I

Plate Steel*
(267) 12 1/2 x 49"-14 gauge

593J

Plate Steel*
(Approx. 140) 12 1/2 x 49" - 14 gauge

593K

Plate Steel*
(Approx. 250) 12 1/2 x 49"-14 gauge

593L

Plate Steel*
(Approx. 400) 12 1/2" x 49"-14 gauge

593M

Plate Steel*
(300) 12 1/2 x 49"-14 gauge

593N

Plate Steel*
(400) 12 1/2 x 49"-14 gauge

593O

Plate Steel*
(400) 12 1/2 x 49"-14 gauge

593P

Plate Steel*
(400) 12 1/2 x 49"-14 gauge

595

Wire Crate with Belts
Lots of new v-belts, assorted sizes, 48' x 48" x 30" crate

596

Ingersoll Rand Air Compressor
Model: SSR-EPE50, 208 CFM, 50 hp electric, hours unknown, was running when taken out of service

597

Ingersoll Rand Air Compressor
Model: SSR-EP15U, 55 CFM, 15 hp electric motor, was running when removed from service

598

Amerex Fire Extinguisher
Portable unit with pintle hitch. Last tested 6/21

598A

Pallet of Misc.*
(1) 5 hp motor, (1) 1/2 hp motor, gearbox, chain, motor stand, pipe clamp

599

ZEKS-Therm Air Dryer
Model: 400 H SBA 400

600

Steel Flat Stock
1/2" x 4' x 8', one corner cut out

601

Steel Flat Stock
1/4" x 4' x 8', 1 full sheet, 1 part piece

602

Stake Pointer
2 heads, 5 hp electric

603

Air Tank
Vertical tank, 3' x 7'

604

New Loader Forks
6" x 44", round hole mount loader forks, 2" hole

604A

Vibrating Conveyor*
18" pan, 9" flared sides, 2 sections, includes chipper infeed section, 31" x 33'6" total, no drive

604B

2 Yard Self Dumping Hopper*
Has fork pockets, 5500 lb. capacity

604C

Cantilever Rack*
In 2 pieces, 68" x 12'8" tall

604D

Cantilever Rack*
In 2 pieces, 68" x 12'8" tall

604E

Loader Forks*
6 x 48" forks, 20" slot spacing

604F

Jib Crane Attachment*
10' long, 5 1/2" fork pockets-19" apart

604G

Lumber Carts*
(1) 44 x 74", (1) 29 x 74"

604H

Fuel Tank for Truck*
2' x 5'

604I

Rack with C-Channel Steel*
26 x 30" rack, 3" wide, 54"-9' long, 1/8" thick

604J

Pallet of Misc. Steel*

604K

2 Barrels of Tire Chains*
For 11R22.5 tires

604L

Pallet of Tire Chains*
For 11R22.5 tires

604M

Fuel Transfer Tank with Pump*
28 x 48 x 16", GPI 15 psi, 12V pump, 60 gallon capacity

604N

Transfer Tank and Toolbox*
32 x 50 x 20" tall, 74 gallon capactiy, 12V 15 gpm pump, 16 x 48 x 9" deep toolbox section

604O

Lumber Cart*
40 x 60 x 42" tall

604P

Tube Steel*
4 x 7 x 128"

604Q

Tube Steel*
4" x 4" x 15'10"

605

4 Strand Log Deck
11' x 18', 12'1" overall width, electric drive

606

Material Rack*
Has fork pockets, 55" x 78" x 8' tall

607

Material Rack*
28" x 8' x 50" tall

608

Lumber Cart*
44 x 60"

609

Hydraulic Press*
13 x 34 x 16" tank, electric drive

610

25 HP Hydraulic Pack*
25 x 37 x 18" tank, electric box

611

Catwalk Steps*
New condition. 36 x 70 x 80" tall

612

Material Rack*
Has fork pockets, 64 x 72 x 90" tall

613

Overhead Hoist Frame*
5' x 10'4" x 8' tall

614

Log Deck Strands*
6 strands total, 8' long, fits up to 3 3/4" wide chain

615

Forks*
5 x 48" forks, 16" slot spacing

616

Forks*
5 x 52" forks, 16" slot spacing

617

Material Rack*
44 x 52 x 38" tall

618

Steel Table*
55 x 60 x 38" tall

619

Hydraulic Pack*
Electric motor, hp unknown, 25 x 42 x 25" tank

619A

Twin City Fan and Blower Unit*
SN: 0015029411, size: 402, type: AFPL, 15 hp electric motor, 2 3/16" shaft, 55 x 55" frame, 5" x 100" pipe

620

Froedge Roll Case*
Model: 40315, made in 2000, electric drive, 6 1/2 x 36" rolls, 18" spacing, 4' x 13' overall

621

Froedge 4 Strand Transfer Deck*
H78B turtletop chain, hydraulic drive, 5' x 15'6", side rolls

622

3 Strand Transfer Deck*
9' x 14', no drive, H78 chain

623

Chipper Chute and Pipe*
Steel 12" elbow chipper chute, 20" x 17'6" steel pipe section

624

4 Strand Transfer Deck*
No chain or drive, 9'6" x 11'6", disassmebled, fits 3 1/2" chain

625

Hydraulic Press*
Hydraulic cylinder, 12" x 12' x 3' tall up to 2 1/2" pipe

626

Pipe Bender*
3' x 24' frame, up to 1 3/4" pipe, (2) bending heads with hydraulic cylinders and valves, electric control box

627

Diesel Fuel Tank and Spill Containment Box*
4' x 11' tank with electric pump, 5' x 12'6" box

628

Rubber Floor Mats*
4' x 6' x 3/4" thick, 7 pieces

628A

HS 1/4 Ton Overhead Hoist*
Does not include a chain hoist, 11' long cross beam, 13' tall post (in 2 pieces)

628B

Incline Belt Conveyor*
No motor, has 480V cord, 56" belt, 6' x 12' x 112" tall, mounted on castors, has steel welded across top to make height capacity 1 1/2"

628C

Steel Tube*
20" x 17' long, 22 x 29" cover on 1 end

628D

Cantilever Rack*
(2) 68" x 10' tall

628E

Steel I-Beam*
6" x 18" x 50' long, has 9" wide C-channel on 1 side

628F

Ventilation Pipe*
Approx. 100' of 36" pipe, 2 elbows, 2 adapters, 1 vent, will include all flanges.

629

Material Rack*
Has fork pockets, 4 x 10 x 4' tall

630

Material Rack*
Has fork pockets, 7' x 8' x 52" tall

631

Pallet Racking*
(18) 16' long "L" brackets, includes all supports and crossbraces

632

Jib Crane*
5" fork pockets-30" apart, 3' x up to 10' wide

633

Jib Crane*
5" fork pockets-30" apart, 3' x up to 10' wide

634

Material Cart*
2 tier, 6' x 6' x 52" tall

635

Material Cart*
2 tier, 6' x 6' x 52" tall

636

Material Cart*
2 tier, 6' x 6' x 52" tall

637

Material Cart*
2 tier, 6' x 6' x 52" tall

638

Steel Table*
45 x 60 x 28" tall

639

Loader Forks*
6 x 42" forks, 3' tall

640

Steel Shelf*
3' x 12' x 68" tall

641

Material Cart*
2 tier, 6' x 6' x 52" tall

642

Material Cart*
7' x 8' x 80" tall

643

Steel Landing Table*
100" x 122" x 18" tall

644

Steel Landing Table*
100" x 122" x 18" tall

645

Steel Rack and Blow Pipe*
4' x 6' rack, steel pipe, (1) 12" x 6' pipe, (1) 12" x 16' pipe

646

Skate Rolls*
54" x 10' x 18" tall, 2 1/2" x 50" rolls, 3" spacing

647

Skate Rolls*
54" x 10' x 18" tall, 2 1/2" x 50" rolls, 3" spacing

648

Skate Rolls*
54" x 10' x 18" tall, 2 1/2" x 50" rolls, 3" spacing

649

Rack with Angle Iron*
44 x 44" rack, 2 1/2-3" angle iron, 6" table steel

650

Steel Storage Bins*
(4) 44 x 54 x 38" deep

651

Steel Storage Bins*
(4) 44 x 54 x 38" deep

652

Steel Storage Bins*
(4) 44 x 54 x 38" deep

653

Steel Storage Bins*
(4) 44 x 54 x 38" deep

654

Steel Storage Bins*
(4) 44 x 54 x 38" deep

655

Steel Storage Bins*
(4) 44 x 54 x 38" deep

656

Steel Storage Bins*
(4) 44 x 54 x 38" deep

657

Steel Storage Bins*
(6) 44 x 54 x 38" deep

658

Steel Storage Bins*
(4) 44 x 54 x 38" deep

Photo Gallery

Share This Listing

Other Sales by
This Company

Oct 1
Middlebury, IN

Sawmill Equipment Liquidation & Rolling Stock - Dunnville, KY

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone:

11346 US 127
Dunnville, KY 42528

Thursday Aug 17, 2023 Completed

Bidder Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

“Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction.
“Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected.
“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.
“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.
“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account.
“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.
“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.
“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot.
“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot.
"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.
“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.
“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.
“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.
“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.
"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.
“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.
“Personal Property” means all tangible and moveable property, including fixtures, designated as Property.
“Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer.
“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).
“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.
“Property” means the Real Property and the Personal Property.
“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium.
"Registered Bidder" means a person or entity that has registered to bid at the Auction.
“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.
“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.
“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.
“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.
“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller).
"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.
“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
Governing Law.
1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
9. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
10. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
11. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
12. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.

1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.

Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers.
ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyers account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information.
Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.

No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.
Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Details
After establishing a prosperous presence in the industry, Tarter Wood has made the strategic decision to liquidate its sawmill operations, including the logistics division and a substantial inventory of high-quality rolling stock. This move will allow Tarter Wood to expand its globally renowned enterprise, Tarter Gate Company LLC, within the available space. The equipment selling at no reserve auction is exceptionally well-maintained, predominantly with one owner. Check it out! 00 Information Lot This is an absolute auction, meaning there are no minimums, no reserves, and no seller bidding. The highest bidder will be the new owner! Auction Agent: Eugene Hochstetler 574-242-1100 Seller Name: Tarter Wood Highlight Pieces: Peterbuilt truck fleet, 5 late model wheel loaders, D6 Cat dozer, Late model Corley resaw, Iseli filing equipment in mint condition, Precision chipper in close to new condition. 01 Preview Information Day before auction or by appointment. Call Eugene 574-242-1100 Location of auction: 11346 US 127 Dunnville, KY 42528 02 Loadout Information Bright Star will staff loadout for Friday, Monday-Thursday of the following week. 03 Payment Information 6% KY Sales Tax-Semi trailer exempt. Payment terms: 10% Onsite Buyers Premium, 13% Buyers Online Premium. Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. 04 CAT 972M Wheel Loader 1:50 Scale Replica- Die Cast Metal Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot. https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s 96 Heavy Equipment Key Set 36 Keys Shipping available for $20 97 Manual Sealless Steel Strapping Tool Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30 98 Chipper Knife Dresser Series I, electric drive 99 Jockey Grinder Model: 06H, Milwaukee drill powered 99A Cedar by Juniper Tallying System* 1 phone reader, 1 scanner, 5 controllers, includes chargers 100 Morbark 640 Debarker Purchased new in 2006 (1st of an entirety) SN: 1060, stationary head, 50 hp electric hydraulic pak, hydraulic drive feed rolls, motor on head sells separate, no support structure, cutout box 100A Lincoln Electric Motor (Part of an entirety) 125 hp, 1785 rpm, 405T frame, WYE Delta starter, cutout box 101 Morbark Log Trough (Part of an entirety)2006 Model: 25-in, SN: 1060, web chain 13", one end lift, legs to first beam, hydraulic drive, 25' long 102 Morbark Log Trough (Part of an entirety) 2006 Model: 30-out, SN: 1060, 11" ladderback chain, hydraulic drive, 2 way kickers, no support structure, 30' 103 Morbark Operators Cab (Part of an entirety) 4'6" x 5', AC unit, all control valves for debarker, electric control boxes, no support past legs, no catwalk or stairs 104 Morbark Paddle Conveyor (Part of an entirety) 36" pan x 35', 13" sides, hydraulic drive 105 Morbark Paddle Conveyor (Part of an entirety) 36" pan x 40' elevated, hydraulic drive 106 Support Structure with Stairs and Catwalk for Debarker (Part of an entirety) 6" x 10" tube top rail, 6"x6" tubing post, 4"x4" tubing post for cab, stairs with railing 107 Morbark Debarker Entirety of Lots 100-106 With 10% raise 108 Morbark 3 Strand Log Deck 2006 11' x 24', stop'n'load, Tulsa winch gear box with hydraulic motor, gears are showing some wear, support to first beam or posts, catwalk on side 108A Morbark Log Bunks 87" x 128", Log catching bunks 108B Tulsa Winch Gearbox with Hydraulic Motor In good condition 109 Corley 3 HB LP Carriage (1st of an entirety) Installed new in 2000, 110 V over air controls, cant kickers, pantograph arm with support post, no controls, 16' x 10' overall 109A Lewis Scanner Controls for Carriage (Part of an entirety) 20' scanner bar, includes mounting beam, all controls in cab related to Lewis controls 110 Corley 56" Circular Husk (Part of an entirety) 56" saw, 42" topsaw, 24" x 6' live off bear belt, 21" belt, saw wrench, no power 111 Lincoln Electric Motor (Part of an entirety) 200 hp, 1785 rpm, 445T frame, 600 amp, 480 V fuse box 112 Baldor Solid State Soft Start (Part of an entirety) 200 hp 113 Corley Operators Cab (Part of an entirety) 11' x 54", no controls 114 Hydraulic Pack for Carriage Controls Berendsen Fluid Power (Part of an entirety) 20 hp electric, 15 gallon per min., 1800 psi, 60 gallon tank, electric cut out spill tray 115 Carriage Track and Frame (Part of an entirety) 54 1/2' center to center x 55', end stops, no support structure 116 Tyrone Berry Shotgun Feed Carriage Drive (Part of an entirety) 100 hp electric, directional valves, hydraulic lines to cylinder, electric cutout, drive cylinder with 42' travel, control valve in cab 116A WYE Delta Starter and Cutout (Part of an entirety) 100 hp, cutout box, used on carriage feed 117 Corley Mill Entirety of Lots 109-116 With 10% raise 118 Corley Bar Type Log Turner 5' bar, hydraulic drive, control valve in cab 119 Electric Hydraulic Pack 50 hp motor, 34" x 23" x 25" tank, line to valve and turner 120 Corley 3 Strand Log Deck 11' x 48' includes 4' nose skids, 13'8" overall width with side rail, electric drive, hydraulic stop'n'load 121 Dayton Dust Blower 18" blower, 8" inlet, 4" outlet, 5 hp electric drive 122 Slab Dump Belt 42" x 15', 30" x 13' belt, electric drive, air cylinder raise 123 Corley Cant Catcher Installed new in 2019! 11' long x 9'6" wide, 42" stroke on pusher, air cylinder drive, no support structure 124 Live Roll Case 40" x 60', 2 separate drives, electric drive, 6 1/2' x 30" rolls, no support past legs, trip switch 125 3 Strand Pop-Up Transfer 9' x 8'6", electric drive 126 Baren Gang Edger 4 blades 18", laser blazer, laser lites, 2 movable blades, 2 tailing belts (1-16" x 30', 1-6" x 30'), 75 hp electric, no support structure, 6" x 48" capacity 126A Edger Blades 18", 3" arbor, freshly sharpened, 28 blades 126B Saw Blades (2) 20' with 1" arbor, (2) 18" with 1" arbor 128 Corley 6' Line Bar Resaw (1st of an entirety) Installed new in 2019!! SN: 16477, 13" x 6' wheels, hydraulic strain, date: 1/16/2018, 2018 CBM12, 36' x 10" bands, 3" bands included, no support structure 128A Nema Electric Motor (Part of an entirety) 200 hp, 1190 rpm, 449T frame 129 Operator Cab with Lewis Control Center (Part of an entirety) All controls for resaw, steps and platform, AC unit, leg supports to first beam 130 Corley Line bar Feed (Part of an entirety) SN: 16477, date: 1/16/2018, 2018 LB41, side press roll with hydraulic drive, hydraulic feed rolls 131 Corley Cant Infeed (Part of an entirety) Pickup and placement roll case, side transfer chains, cant stops, hydraulic drive, 14' x 5'4" overall, 9" x 24" rolls 132 Corley Outfeed Board Separator (Part of an entirety) 7' x 20' overall, 9" x 36" rolls, lifting end roll, two way chain sorter, board and cant splitter, hydraulic drive 133 Hydraulic Pack for Resaw (Part of an entirety) 15 hp electric, valve bank, hoses to resaw, oil cooler, 27' x 47" x 15" tank 134 4 Strand Transfer (Part of an entirety) 11' x 10'9", 4' tipple arms, end shaft is connected to next deck but can be removed, no support to ground 135 Corley 180° Transfer (Part of an entirety) 4 strand, DF3500 chain, legs to first cross beam, 10'6' wide, 38' wide overall, electric drive, includes steps 136 Corley 4 Strand Transfer with Cant Turner (Part of an entirety) 12' x 14', cant stops, cant turner, electric drive, legs to first beam 137 Operators Cab with Controls (Part of an entirety) 5'x5', AC unit, Lewis controls for runaround and cant turner, legs to first beam 137A Hydraulic Pack for Resaw Line (Part of an entirety) 40 hp electric with 2 pumps, 25 hp electric with 2 pumps, oil cooler, 53 1/2' x 47 1/2" x 24" tank, mounted on spill tray 138 Square D Motor Control Center (Part of an entirety) 600 V, 800 amp, 8 sections, all motor controls for resaw line 139 Resaw and Runaround Entirety of Lots 128-138 With 10% raise 140 Corley 4 Strand Transfer Deck 9'6" x 24', cant stop, electric drive, 4 arm cant pickup 141 Belt Conveyor 35" x 21', 25' pan, 10" side, no support structure, electric drive 142 4 Strand Transfer Deck 11' x 28' flat plus 14' on slant, no legs or support structure, 4' tipple arms, no lift cylinder 143 Belt Conveyor 32" x 28', 25" pan, 24" belt, 42' tipple arms with skate rolls, electric drive, legs to first beam 144 Belt Conveyor 35' x 28', 25" pan, 24" belt, electric drive 145 4 Strand Transfer 11' x 13', H78B rooftop chain, with cant stop, electric drive, 11'10" wide overall, steps on side, no legs past first I beam 146 4 Strand Transfer 9'6" x 13', H78B rooftop chain, with cant stop, electric drive, air controls, no legs past first I beam 147 6 Strand Elevated Transfer Deck 12' x 11'6", only 3 strands have chain, electric drive, support to ground 148 Corley Drop Saw Trimmer New in 2018, 22' wide, 20' capacity, 10" x 34" board positioner rolls with end stop, 10 hp electric on saws, 26" blades, 8 strand feed chain, no sprockets on one end, small motor starter box 148A Trimsaw Blades New in 2018, 26" with 1 3/8' arbor, 21 blades, freshly sharpened 149 Grading Deck and Length Sorting Deck New in 2018, 12'6" x 20' with spiral end evener rolls, 6 strand transfer chain, length sorting switches, electric drive 150 Froedge 3 Strand Transfer Deck New in 2018, 9'6" x 17', electric drive 151 Froedge 6 Strand Elevated Deck New in 2018, 10'6" x 10', electric drive 152 Froedge Unscrambler 6 Strand with bars New in 2018, 12' x 13' tall, 3 sections of bars, phot eye sensor 153 4 Strand Transfer Deck New in 2018, 10' x 7', no support past first I beam, electric drive 154 4 Strand Transfer Deck New in 2018, 9'6' x 24', electric drive, H78B rooftop chain, steel decking, no support past first I beam 155 4 Strand Transfer Deck New in 2018, 10' x 20', H78B rooftop chain, no sprockets on one end, attached to 154, no support past first I beam, electric drive 156 6 Strand Waterfall Unscrambler New in 2018, 16' x 8' x 68" tall, 3 sections of bars, electric drive, no support structure 157 5 Strand Elevated Transfer Deck 17' wide overall, 10' long strands, drop down deck from trim saw, no drive, no shaft or sprockets on top end 158 4 Strand Green Chain 10' x 80', steel decking, electric drive 159 Lumber Carts 60" x 42' x 32" posts, straight steel wheels, 5 carts 160 Lumber Carts 60" x 42' x 32" posts, straight steel wheels, 5 carts 161 Lumber Carts 60" x 42' x 32" posts, straight steel wheels, 6 carts 162 5 Lumber Carts 60" x 48" x 32" posts, straight steel wheels 163 5 Lumber Carts 60" x 48" x 32" posts, straight steel wheels 164 4 Lumber Carts 60" x 48" x 32" posts, straight steel wheels 165 3 Lumber Carts (2) 60" x 41 x 32" posts, (1) 60" x 48" x 32" posts, straight steel wheels 166 1 Lumber Cart 6' x 4' x 2' posts, heavy built 166A Lumber Rack 50" x 8' with board stop 167 Self Dumping Hopper 54' x 60" x 32' 168 Self Dumping Hopper 6' x 5' x 40" 169 9 Lumber Carts 60" x 42" x 32" posts, (1) 48" wide, straight steel wheels 170 3 Strand Transfer Deck 9'6" x 21'6", heavy duty deck, electric drive 171 Precision Chipper (1st of an entirety) Model: 58-15, SN: C-3379, 6 knives, pipe adapter 172 Neidec Electric Motor (Part of an entirety) Includes WYE Delta Starter, cutout box, 150 hp, 1790 rpm, 445T frame 173 Precision Shaker Screen (Part of an entirety) Size: 8 x 6, SN: S-1719, electric drive 174 Chip Cyclone with Pipe (Part of an entirety) 4' cyclone, pipe to chipper 175 Precision Chipper Entirety of Lots 171-174 With 10% raise 176 Concave Belt Conveyor 41' x 52', 30" belt, electric drive 177 Harvest Handler Elevator 12' x 16', 6" pan, 5" paddles, electric drive 178 Webster Vibrating Conveyor Model: FSH, size: 24-33, 38' with chipper chute, 24" pan, 10" sides 179 Webster Vibrating Conveyor Model: F5H, 90' long 24" pan, 10" sides, size 24-33, electric drive 179A Precision Vibrating Conveyor 28" x 55', 18" pan, 8" sides, 7.5 hp electric drive 179B Precision Vibrating Conveyor Model: 20FT, SN: V2354, 30" x 30', 18" pan, 8" sides, electric drive 180 Barn Sweep Conveyor 47" x 50', elevated, 18" paddles, electric drive 181 Precision Chipper Completely rebuilt, SN: C-2996, Size 58-15, no pulley, 6 knives with knife jig 182 2018 Iseli RZI Auto Leveler/Tensioner New in 2018!! Model RZI, SN: 844211, computerized auto leveler, wooden work platform, in good condition 183 Iseli BNP 100 Auto Band Sharpener NEW IN 2018!! SN: 844221, computerized auto sharpener, dust collector unit, in good condition 184 Armstrong Back Clamp and Stands Adjustable height, 4 stands one has feed cylinder 185 Armstrong Stretcher Roll (1st of an entirety) #4, SN :56SR-133, electric drive 186 Armstrong Welding Clamp (Part of an entirety) Model 62, #16 welding clamp 187 Armstrong Hammering Bench with Anvil (Part of an entirety) 4" x 4' x 12" anvil, floor rolls, tools on bench 188 Armstrong Hammer Bench and Roller Entirety of Lots 185-187 With 10% raise 188A Armstrong Anvil 12" x 48" x 4" 189 Precision Tub Grinder Model 6K-440, SN: PAG945, 6 knife 20" capacity, 2 new extra stones, sump defoamer, electric drive 190 Simonds Chipper Knives and Bench (18) 19 1/2' new knives, (6) 19 1/2" used knives, 24" x 48" workbench, shelf with parts 191 Jet Drill and Mill Machine Model: JMD-18, SN: 1805552, set up to dress guides, carbide cutter, vacuum dust collector, 192 M+J Guide Dressing Machine Sliding block holder, electric drive 193 Shelf with Guide Blocks 1 1/2' x 13" guide blocks, some new, contents of 2 shelves 194 Armstrong Swage and Shaper on Cart #6900 shaper, Hanchett #54/55 swage air powered, 24" x 48' cart, contents of cart, parts for swage, new grinding wheels 195 Steel Work Table on Casters 42' x 33', 1/2" steel top 196 Belt Sander and Vise on Cart 36" x 23' steel cart, 1" x 30" belt-5" disc sander, 5" vise 197 Simonds 56' Circle Saw Blade F style, new carbide teeth installed, good saw 198 Simonds 56' Circle Saw Blade F style, new carbide teeth installed, good saw 199 Simonds 56' Circle Saw Blade F style, new carbide teeth installed, good saw 200 Simonds 56' Circle Saw Blade F style, new carbide teeth installed, good saw 201 Simonds 56' Circle Saw Blade F style, new carbide teeth installed, good saw 202 Simonds 56' Circle Saw Blade F style, new carbide teeth installed, good saw 203 Simonds 56' Circle Saw Blade F style, new carbide teeth installed, good saw 204 42' Blade for Topsaw 42", P style, 2" arbor, new carbide teeth installed 205 Hanchett 408 L.H. Bandsaw Grinder SN: 75, wheel size 10 x 5/8 x 5/8, band holding stands, some tools, extra wheels 206 Armstrong Roller and Bench #2, SN: 13180, 6 1/2" x 36' x 1 3/4" anvil, tools, bottom rolls 207 Hanchett Air Swage Model: 54/55 208 Hanchett Grinder and Shelf with Parts Model: 06H grinder with Milwaukee drill, was rebuilt, new grinder wheel, 1 box of pipers carbide teeth, lots of Jockey grinder parts, 48" x 24' x 7' shelf, 6 box of lumber crayons 209 New Simonds Dominator Carbide Teeth BF 8/9 9/32, 5 box 100 per box, plus part box 210 Simonds Stand-All Sawbits BF 8/9 9/32, stand-all BT, 5 new boxes, 1 part, 1 box regular bits 211 Simonds Shanks F 8 ga. Regular 3rd, 3 new boxes, 1 box 2nd, several part boxes 212 Marking Paint 33 cans green, 8 cans orange 213 Circular Saw Stand Steel rack, 4 slots, saw working stand 214 Bolt Bin with Parts 34" x 48' x 12" deep, 2 tier bins, all controls 215 Air Nailers and Storage Cabinet 51' x 66" x 28" deep cabinet with 2 doors and shelves, Bostitch nailers, some staples, all parts in cabinet 216 Seat for Operators Cab On pedestal, new seat 217 Bio Lube #2 2 new barrels, lube for bandsaw 217A Pallet Jack 218 Sawmaster 32W Oil 1 part barrel, 1 empty barrel, 2 pumps 219 Poly Saw Guard 1 new part roll, lots of used 220 Misc. Lot Towel dispenser, air hose, water hose, sprayer, chair, porter cable vacuum, 22" portable fan, broom, shovel 221 Torch Set with Tanks Gauges and torches 222 1993 Atlas Copco Air Compressor Model: GA45, SN: HOLO21037, Screw type compressor, duct work to outside, cut out box, no air lines, 60 hp electric motor 223 Electric Motor for Compressor Fits lot 222, new motor 60 hp 224 Ingersoll Rand Air Compressor Model: SSR-EP50SE, SN: G1017U92291, 198CFM, 50 hp electric motor, no air lines 224A Vertical Air Tank 4' x 12', relief valve 224B Air Lines All air lines going to equipment not lotted with equipment, lots of 2 1/2' pipe 224C Support Structure under Corley Mill 3/8" x 6" x 8' I beams plus braces, catwalk behind mill, no electrical or air lines 224D Support Structure under Resaw and Runaround Support structure and catwalk around resaw and runaround, no electrical or air lines, no control valves 224E Support Structure under Decks and Catwalk No electrical or air lines as marked, structural steel and catwalk, stairs, from log deck to mill to deck going to trimsaw on front side of mill, catwalk beside trimsaw 224F Structural Steel From break down line to trimsaw as marked, no air lines or electrical 224G Electric Wires and Conduit in Building Electric wires from main to cutout box to equipment, includes conduit but no boxes as marked, does not include 110 V pertaining to building 225 Ingersoll Rand Air Dryer Pipe as marked 226 Ingersoll Rand Air Compressor Model: SSR-EP25SE, SN: KE3147U96109, 95CFM, 25 hp electric motor, working condition 227 Van-Air Air Dryer No air lines, Twin tank, electric controls 228 Select Sawmill Bandsaw (1st of an entirety) 4" x 36" wheels, 32" wide opening, 4 post head frame, hydraulic carriage drive, double cut mill, computerized control station, 20 hp electric hydraulic unit, 75 hp electric on saw, 229 2 Strand Log Deck with Stop'N'Load (Part of an entirety) Model: 4221D, SN: 28510500X115RS78, 6' x 13', 46" loading arms, hydraulic drive 230 3 Strand Transfer Deck (Part of an entirety) 8' x 12' plus 4' drop section, electric drive 231 Morgan Board Edger (Part of an entirety) 5" x 30" capacity, 26" x 44" infeed belt, 1 moving saw, 14' split saw blades, 26' x 44" outfeed belt, 30 hp electric motor, can be portable 232 Dust Conveyor (Part of an entirety) 11" x 14'6", 6" pan, 8' sides, electric drive 233 Dust Conveyor (Part of an entirety) 15" x 10', 9" pan, 7 1/2" paddles, 4" sides, chain type conveyor 233A Dust Conveyor 18" x 24', 11" pan, with slide pan, electric drive 234 Bandsaw Blades (Part of an entirety) 4" x 21' Double Cut bandsaw blades, 146 tooth, 11 pieces 235 3 Lumber Racks (Part of an entirety) 8' x 4', 36" tall, board stop, slab rack 4' x 4', metal stand 4' x 20" 236 Banding Tools and Hand Tools (Part of an entirety)Shovels, sledge hammer, axe, digging bar, banding tools, steel banding, dust rake, cant hook, bolt cutter 237 Delta 10" Power Miter Saw (Part of an entirety) 238 Porter Cable Air Compressor (Part of an entirety)150 max psi, 24 gallon tank 239 All Electrical to Mill (Part of an entirety) Cutout boxes, motor starters 240 Entirety of Lots 228-239 With 10% raise 241 JD Turbo Power Unit Model: 4045 TF275, SN: PE4045J004385, clutch, mount to be used on select bandsaw mill, in good condition 255A Wheel Loader Forks 8 x 48" forks, 62" wide overall, quick attach 242 Corley 10 Head Drop Trimmer* SN: DST-021, 9' x 24' overall, 7.5 hp electric motor on each head, 24" blades, air valves and cylinders. Contact Myron Nissley with any questions 574-536-2481 243 Cant Tipple with Frame* 16' long, 4' x 19' overall, air cylinder. Contact Myron Nissley with any questions 574-536-2481 256A Wheel Loader Forks 8 x 48" forks, 62" wide overall, quick attach 244 2013 Wood-Mizer LT-70 Portable Sawmill* VIN: 456D72419DNBB5906, meter reads, 10297 hours, does not have the trailer package, 30 hp electric motor-230/460 volt, 1 x 24" band wheels, includes 18 used 1 1/2" bands, 32" 8' landing table, Debarker attachment, log loading arm, has computerized setworks with joystick controls, includes trailer hitch but no axle. Good running machine. Contact Myron Nissley with any questions 574-536-2481 244A Yanmar Diesel Engine* Model: 3TNM74F-SAWM, SN: 006189, includes fuel tank, was used on Wood-Mizer EG200 edger. Contact Myron Nissley with any questions 574-536-2481 257A Wheel Loader Forks 6 x 52" forks, 62" wide overall, quick attach 245 Ingersoll-Rand T30 Air Compressor* Model: 234OL5, SN: 30T923383, 5 hp electric motor, 60 gallon vertical air tank 246 2-Strand Log Deck with Stop'n'Load* 80" x 22', 3' loading arms, hydraulic cylinders onloading arm, electric drive. Contact Myron Nissley with any questions 574-536-2481 258A Wheel Loader Forks 6 x 52" forks, 62" wide overall, quick attach 247 WMMA 2-Blade Edger* Shop # 66B21, 6 x 36" capacity, (2) 16" blades, 1 moveable, 30 hp electric motor, 42" x 92" dead roll table outfeed, 42 x 90" dead roll infeed. Contact Myron Nissley with any questions 574-536-2481 248 Belt Conveyor* No drive, 6 1/2" belt, 8" pan, 4 1/2" sides, 12" x 28' 259A Wheel Loader Forks Quick attach, used on Volvo L60F, 6 x 54" forks, 50" wide 249 Self Dumping Hopper* 56 x 80 x 52" deep 249A Self Dumping Hopper* 60 x 65 x 48" deep 260A Volvo Loader Forks SN: 26130003, Quick attach, 8 x 48" forks, 62' wide overall 249B Self Dumping Hopper* 60 x 65 x 48" deep 249C Self Dumping Hopper* 60 x 65 x 48" deep 250 Toyota Forklift* Model: 8FDU30, SN: 10689, 5670 lb capacity, 21027 hours, has side shift, enclosed cab with fan and heater, needs 1 new door, diesel powered, 6.5-10 tires on rear, 28x9-15 tires on front, solid tires, 6 x 60" forks, 3 stage mast-90" tall. Good, running machine. 252 Toyota Electric Tow Truck* Model: 7TB50-69209E, battery powered, includes charger, 24V 253 Toyota Electric Tow Truck* Model: 8TB50-36074, 710 lb. maximum couples weight, battery powered, 24 V, includes charger 254 Toyota Electric Tow Truck* SN: MVE00147504, model: 85P-13, 24 V battery, includes charger 255 2015 Cat 930M Wheel Loader SN: CAT0930MLKTG00541 Meter reads: 16,834 hours Engine: Cat C7.1 140kw (SN: D8T05363) Fuel type: Diesel ROPS: Enclosed 3rd Valve: No Center to center of pins: 25" Tire Size: 20.5R25 Attachments: 8 x 48" forks, 62" wide overall Heater: Yes A/C: Yes Quick Attach: Yes Features and Notes: Good running machine! Electronic display. 256 2015 Cat 930K Wheel Loader SN: CAT0930KHRHN03883 Meter reads: 19,857 hours Engine: Cat C7.1 Acert 152 hp Fuel type: Diesel ROPS: Fully enclosed 3rd Valve: No Center to center of pins: 25" Lift capacity: 28,948 lb. operating weight Tire Size: 20.5R25 Attachments: 8 x 48" forks, 62" wide overall Heater: Yes A/C: Yes Quick Attach: Yes Features and Notes: Good running machine! 257 2021 Volvo L60H Wheel Loader SN: VCEOL60HT0S622231 Meter reads: 3,096 hours Engine: Volvo D6J-131 hp (SN: 1246061) Fuel type: Diesel ROPS: Fully enclosed 3rd Valve: Yes Center to center of pins: 19" Tire Size: 20.5R25 Attachments: 6 x 52" forks, 62" wide overall Heater: Yes A/C: Yes Quick Attach: Yes Features and Notes: Great running machine! Backup camera, pilot joystick controls 258 2020 Volvo L60H Wheel Loader SN: VCEOL60HA0S622092 Meter reads: 2,692 hours Engine: Volvo D6J-131 hp (SN: 12394366) Fuel type: Diesel ROPS: Enclosed 3rd Valve: Yes Center to center of pins: 19" Tire Size: 20.5R25 Attachments: 6 x 52" forks, 62" wide overall Heater: Yes A/C: Yes Quick Attach: Yes Features and Notes: Good running machine! 268 Case 580 Super M Backhoe SN: JJG0284708, meter reads: 7,310 hours, 19.5-24 tires on rear, 13-16.5 tires on front, CNH 4 cylinder diesel engine rated at 95 hp, 30 x 82" front end bucket, 2' wide x 3' deep 5 tooth backhoe bucket. Good running machine. Photo available online 259 Volvo L60F Wheel Loader SN: VCE0L60FK00061851 Meter reads: 34,615 hours Engine: Volvo D6E-126 hp Fuel type: Diesel ROPS: Enclosed 3rd Valve: No Center to center of pins: 19" Tire Size: 20.5R25 Attachments: 6 x 54" forks, 50" wide overall Heater: Yes A/C: Yes Quick Attach: yes Features and Notes: Good running machine! Photo available online 260 Volvo L50B Wheel Loader SN: L50BP9839 Meter reads: 32,764 hours Engine: Volvo (SN: AB80644NT749463) rebuilt on 12/2014 Fuel type: Diesel ROPS: Enclosed 3rd Valve: No Center to center of pins: 17 1/2" Tire Size: 17.5 R25 Attachments: 8 x 48" forks, 62' wide overall Heater: Yes A/C: Yes Quick Attach: Yes Features and Notes: Runs and operates well 260A 1985 John Deere 544C Wheel Loader SN: DW544CD507622 Engine: 6 cylinder 414T, turbo charged Fuel type: Diesel ROPS: Yes, fully enclosed 3rd Valve: No 3rd valve Tire Size: 17.5-25 Attachments: 104" bucket, 4' x 6" x 2" forks (one fork is stationary) Heater: No A/C: No Quick Attach: No Features and Notes: fuel gauge is broken, machine occasionally spits radiator fluid out of over flow when decelerating from a high rpm. comes with extra 17.5-25 tire and rim, engine runs strong, operates the way it should. Contact Myron Nissley with any questions 574-536-2481. 261 Case W14C Wheel Loader SN: JAK0030258 Meter reads: 26,302 hours Engine: 5.9 Cummins Fuel type: Diesel ROPS: Enclosed 3rd Valve: No Center to center of pins: 25" Lift capacity: Unknown Tire Size: 17.5R25 Attachments: Pin through forks, 4 x 48" forks, 5' wide Heater: No A/C: No Quick Attach: No Features and Notes: Runs and operates as it should 264 1985 Case W11B Wheel Loader SN: JAK0017289 Meter reads: 1,438 hours Engine: Case Fuel type: Diesel ROPS: Enclosed, needs new door 3rd Valve: Yes Tire Size: 15-19.5 Attachments: 6 x 42" forks, 58" wide Heater: No A/C: No Quick Attach: Yes Features and Notes: Has master disconnect switch. Runs and operates as it should. 264A Case 455C Track Loader SN: GBE0004375, meter reads: 3,718 hours, 14' tracks, Case diesel engine, 5 x 40" forks, 52" wide overall, pin through style forks, open cab. Runs and operates well 264B Wheel Loader Bucket Used on Volvo L50B, quick attach, 3' x 88" 264C Wheel Loader Bucket* Quick attach, 102" wide x 54" deep x 6' high 264D Wheel Loader Bucket* Quick attach, 4' x 104" x 5' tall 264E Wheel Loader Bucket* Quick attach, 38" x 8' x 42" tall 264F Sawdust Bucket* Quick attach, 4' x 8' x 4' tall 264G Wheel Loader Forks* Quick attach, 5 x 50" forks, 50" wide 264H Jib Crane for Loader* Fork pockets, 14' long, 9 x 38" plate on end, has tie-back chains 264I Push Blade* Quick attach, 18" x 10' 264J Snow Blade* Quick attach, 10' wide 265 2014 Cat D6N XL Dozer SN: PER00487 Meter reads: 6,729 hours Engine: Cat C6.6 Acert (SN: C8N13757) Fuel type: Diesel HP: 175 hp Blade: 10'6" 6-way ROPS: Enclosed A/C: Yes Heater: Yes Features and Notes: 24" tracks, high track 266 2017 Case 850M WT Dozer SN: JJGN850MEGC103124 Meter reads: 5,493 hours Engine: Case 4.5L Fuel type: Diesel Blade: 112" 6-way ROPS: Enclosed A/C: Yes Heater: Yes Features and Notes: 20" tracks, tracks are in good condition, Allied H4A winch with 3/4" cable, 20201 lb operating weight, good running machine 267 2004 Volvo EC160BLC Excavator SN: EC160V10370 Meter reads: 11,645 hours Engine: Volvo D6D-EBE2-120HP (SN: 00915808) Fuel type: Diesel Bucket: 3' Geith tooth bucket Hydraulic thumb: Yes Heater: Yes A/C: Yes Features and Notes: 24" tracks, fully enclosed cab, starts right up and operates well. 267A Excavator Bucket* 64" wide, 42" deep, single blade, 19" center to center on pins 302 Great Dane Flatbed Trailer VIN: 1GRDM96204M702293, GVWR: 80000 lb., 295/75R22.5 tires, steel rims, 102" x 48'. Includes sliding straps, spare tire, and storage for cribbage blocks. Road ready 267B Quest Excavator Bucket* 2' wide x 40" deep, 5 teeth, 19" center to center of pins 270 2017 International LT625 6x4 Semi Truck VIN: 3HSDZAPR6JN401277 Meter reads: 747,719 miles Engine: Cummins X15-450 hp Transmission: Automatic GVWR: 53,200 lb Front axle rating: 13,200 lb Rear axle rating: 20,000 lb/axle Heat/AC:Yes Wet kit: No Features and Notes: 64" sleeper, 275/80R22.5 tires, aluminum brush guard. Great running truck. 271 2016 Peterbilt 589 Semi Truck VIN: 1XPBD49X7GD354118 Meter reads: 771,242 miles Engine: Cummins ISX15 450 hp Transmission: Automatic GVWR: 53,200 lb Front axle rating: 13,200 lb Rear axle rating: 20,000 lb/axle Heat/AC: Yes Wet kit: No Features and Notes: 275/80R22.5 tires, 64' sleeper, aluminum brush guard. Very nice, great running truck. 272 2016 Peterbilt 589 Semi Truck VIN: 1XPBD49X9GD354122 Meter reads: 724,126 miles Engine: Cummins X15-450 hp Transmission: Automatic GVWR: 53,200 lb Front axle rating: 13,200 lb. Rear axle rating: 20,000 lb/axle Heat/AC: Yes Wet kit: No Features and Notes: 275/80R22.5 tires, 64" sleeper, aluminum brush guard. Great running truck. 273 2016 Peterbilt 589 Semi Truck VIN: 1XPBD49X7GD354121 Meter reads: 766,490 miles Engine: Cummins X15-450 hp Transmission: Automatic GVWR: 53,200 lb Front axle rating: 13,200 lb. Rear axle rating: 20,000 lb/axle Heat/AC: Yes Wet kit: No Features and Notes: 275/80R22.5 tires, 64" sleeper, aluminum brush guard. Very nice running truck. 274 2016 Peterbilt 589 Semi Truck VIN: 1XPBD49XXGD354114 Meter reads: 603,640 miles Engine: Cummins X15-450 hp Transmission: Automatic GVWR: 53,200 lb Front axle rating: 13,200 lb. Rear axle rating: 20,000 lb/axle Heat/AC: Yes Wet kit: No Features and Notes: 275/80R22.5 tires, 64" sleeper, aluminum brush guard. Great running truck. 275 2016 Peterbilt 589 Semi Truck VIN: 1XPBD49X9GD354119 Meter reads: 672,886 miles Engine: Cummins X15-450 hp Transmission: Automatic GVWR: 53,200 lb Front axle rating: 13,200 lb Rear axle rating: 20,000 lb/axle Heat/AC: yes Wet kit: No Features and Notes: 275/80R22.5 tires, aluminum brush guard, 64" sleeper. Great running truck! 276 2016 Peterbilt 589 Semi Truck VIN: 1XPBD49X5GD354117 Meter reads: 935,443 miles Engine: Cummins X15 Transmission: Automatic GVWR: 53,200 lb Front axle rating: 13,200 lb. Rear axle rating: 20,000 lb/axle Heat/AC: Yes Wet kit: No Features and Notes: 275/80R22.5 tires, 64" sleeper, aluminum brush guard. Great running truck. 280 1995 International 9400 6x4 Semi Truck VIN: 2HSFHASRXSC022630 Meter reads: 917,895 miles Engine: Cat 3406 Transmission: Spicer 10 speed GVWR: 52,000 lb Front axle rating: 12,000 Rear axle rating: 20,000 Heat/AC: Yes Wet kit: No Features and Notes: 48" sleeper, 11R22.5 tires. Good running truck. Photo available online 281 1997 Ford Dump Truck VIN: 1FDZU90X1VVA12743 Meter reads: 89,883 miles Engine: Cat 3406 Transmission: 8 speed Eaton GVWR: 58,000 lb Front axle rating: 18,000 lb Rear axle rating: 20,000 lb Heat/AC: yes Wet kit: No Features and Notes: Tri-axle, 425/65R22.5 tires on front, 275/80R22.5 tires on rear. 8' x 18' x 5' deep bed. Good running truck. Photo available online 282 1999 International 5000 Dump Truck VIN: 1HTTGAHT4XJ002578 Meter reads: 484,280 miles Engine: Cummins MII Plus Transmission: 9 speed Eaton Heat/AC: Yes Wet kit: No Features and Notes: 425/65R22.5 tires on front, 2 axles, 11R22.5 on rear 2, tri-axle. 8' x 16' x 6' tall bed. Good running truck. Photo available online 283 1999 International 4700 4x2 Flatbed Truck* VIN: 1HTSCAAL7XH692903 Meter reads: 579,402 miles Engine: DT 466E Transmission: International 6 Plus Heat/AC: Yes Wet kit: No Features and Notes: 254" WB, 11R22.5 tires, 8' x 26'6" flatbed with 52" tall guard behind cab, toolboxes mounted under bed. Good, clean running truck. 284 1996 International 4700 4x2 Flatbed Truck* VIN: 1HTSCAAMXTH350932 Meter reads: 85,817 miles Engine: DT 466E Transmission: Eaton 6 speed GVWR: 25,500 lb. Front axle rating: 8,000 lb Rear axle rating: 17,500 lb Heat/AC: Yes Wet kit: No Features and Notes: 254" WB, 8' x 24'6" flatbed with 56" tall guard behind cab, 11R22.5 tires. Good, running truck 285 1978 Ford 9000 Semi Truck* VIN: U91PVCF4183 Meter reads: 580,411 miles Engine: Cummins TC-350 rated at 350 hp Transmission: Fuller Roadranger 10 speed GVWR: Approx. 45,000 lb Heat/AC: No Wet kit: No Features and Notes: 295/75R22.5 tires, needs new battery, other than that runs good. 286 2005 International 4300 SBA 4x2 Semi Truck VIN: 1HTMMAN55H126226 Meter reads: 387,962 miles Engine: DT 466 Transmission: 8 speed Eaton Fuller GVWR: 33,000 lb Front axle rating: 12,000 lb Rear axle rating: 21,000 lb Wet kit: No Features and Notes: 690" WB, 8' x 26'6" flatbed, boxes under bed, 295/75R22.5 rear tires, 275/80R22.5 front tires. Good, running truck. 287 2005 International 4400 6x4 Straight Truck VIN: 1HTMSAAR85J005059 Meter reads: 399,811 miles Engine: DT 466 Transmission: 10 speed Eaton Fuller GVWR: 52,350 lb Front axle rating: 12,350 lb Rear axle rating: 20,000 lb Heat/AC: Yes Wet kit: No Features and Notes: 256" WB, tandem axle, 8' x 28' flatbed, 11R22.5 tires, sliding straps, toobox under bed. Good, running truck. 288 1999 International 4900 Straight Truck* VIN: 1HTSDAAM5XH679816 Engine: DT466E Transmission: 6 speed Eaton Fuller Meter reads: 275,231 miles GVWR: 25,500 lbs. GAWR front: 8,000 lbs. GAWR rear: 17,500 lbs. Features and notes: Has heat/AC, 8' x 26' flatbed, non CDL, good running truck 292 2000 Sterling Log Truck VIN: 2F2XKWEBOYAF35650 Meter reads: not available Engine: Cat C-12 Transmission: 8 speed Roadranger Front axle rating: 18,000 lb Rear axle rating: 20,000 lb/axle GVWR: 58,000 lb Heat/AC: Yes Double frame: Yes Features and Notes: 11R22.5 tires on rear, 385/65R22.5 steer tires, 8' x 20' bed, 90" x 7' tall bunks. Good running truck. Photo available online 293 2003 International 5600i 6x4 Log Truck VIN: 1HTXHAPT83J081621 Meter reads: 482,080 miles Engine: Cummins X15-450 hp Transmission: 8 speed Eaton Log loader: None GVWR: Approx. 50,000 lb Heat/AC: Yes Full lock in rears: No Double frame: Yes Features and Notes: 11R22.5 tires, 8' x 17' bed, 7' x 6' tall bunks. Good running truck. Photo available online 294 1997 Ford LTL 9000 Log Truck VIN: 1FDZA90W6VVA28176 Meter reads: 962,444 miles Engine: Cat Transmission: 10 speed Eaton Log loader: None Suspension: Hendrickson Front axle rating: 14,060 lb Rear axle rating: 23,000 lb GVWR: 60,000 lb Heat/AC: Yes Full lock in rears: No Double frame: Yes Features and Notes: 8'4" x 19' bed, 92" wide x 70" tall bunks, 11R22.5 tires. Good running truck. Photo available online 295 1986 Ford LTL 9000 Log Truck VIN: 1FDYA92W6GVA31865 Meter reads: 591,865 miles Engine: Cummins NTC-350 Transmission: 8 speed Eaton Log loader: None Suspension: Hendrickson GVWR: 50,000 lb Heat/AC: No Full lock in rears: No Double frame: Yes Features and Notes: 11R22.5 tires, 8' x 20' log bed, 82" tall x 88" wide bunks. Runs good. Photo available online 296 2000 Sterling Log Truck VIN: 2FZXKWEB1YAF34085 Meter reads: 556,656 miles Engine: Cat C-12 Transmission: Roadranger 8 speed Log loader: None Suspension: Spring Leaf Front axle rating: 18,000 lb Rear axle rating: 20,000 lb/axle GVWR: 58,000 lb Full lock in rears: No Double frame: Yes Features and Notes: 80' x 20' log bed, 7' x 7' log bunks, 425/65R22.5 tires on front, 11R22.5 tires on rear. Starts and runs good. 297 1996 Ford L9000 Log Truck VIN: 1FDZU90T7TVA11476 Meter reads: 556,296 miles Engine: Cat 3306 Transmission: Eaton Fuller 8 speed Log loader: None Suspension: Leaf Spring Front axle rating: 16,000 lb Rear axle rating: 20,000/axle GVWR: 56,000 lb Heat/AC: No Full lock in rears: No Double frame: No Features and Notes: 11R22.5 tires on rear, 385/65R22.5 on front, 8' x 20' flatbed with log bunks, 89" wide x 82" tall bunks. Starts and runs strong! 298 1996 Ford L9000 Log Truck VIN: 1FDZY90X7TVA13798 Meter reads: 119,419 miles Engine: Cat 3406 350hp (SN: 8PN06836) Transmission: Eaton Fuller 8 speed Log loader: None Suspension: Leaf Spring Front axle rating: 18,000 lb. Rear axle rating: 20,000/axle GVWR: 58,000 lb Heat/AC: No Full lock in rears: No Triple frame: Yes Features and Notes: 8' x 19' log bed, 7' x 7' log bunks, has pintle hitch and trailer brakes for pup trailer, 385/65R22.5 tires on front, 11R22.5 tires on rear axles. Starts and runs good. 298A Log Bed for Truck* 98" x 17' long, bunks are 7' wide x 80" tall 299 1994 Ford L9000 Water Truck VIN: 1FDZU90L2RVA52767 Meter reads: 361,702 miles Engine: Cummins L10 280hp Transmission: 8 speed manual GVWR: 64,000 lb Front axle rating: 18,540 lb Rear axle rating: 46,000 lb Heat/AC: No Wet kit: No Features and Notes: 246" WB, air brakes, 64" x 12' tank, multi quip 3" trash pump powered by Honda GX240 motor, includes hoses, pump works well, 11R22.5 tires on rear, 385/65R22.5 steer tires, good running truck 299A 2007 Chevrolet C4500 Work Truck* VIN: 1GBE4C1257F403401, GVWR: 17500 lbs., meter reads: 386000 miles, 2WD, Duramax diesel, automatic transmission, single cab, has heat/AC, 8' x 12'6" flatbed with 2" hitch receiver, gooseneck hitch, (2) 20" x 6' aluminum toolboxes, spare tire, 225/70R19.5 tires, approx. 150000 miles on LB2 Duramax, approx. 20000 miles on new Jasper transmission, full service done within month of auction, new gooseneck plate and ball. Good running truck. Contact Myron Nissley with any questions 574-536-2481 300 2004 Great Dane Flatbed Trailer VIN: 1GRDM96284M702199, 8' x 48', 295/75R22.5 tires, includes sliding straps and box for cribbage blocks 301 2004 Great Dane Flatbed Trailer VIN: 1GRDM96264M702315, 8' x 48', 295/75R22.5 tires, sliding straps, cribbage block box 302 2001 Transcraft Flatbed Trailer* VIN: 1TTF4820X12007610, 8' x 48', 4' tall guard on front, includes all sliding straps, 285/75R24.5 tires, toolbox under deck 303 2005 Fontaine Flatbed Trailer with Log Bunks* 88" x 55" tall bunks, 6 bunks, includes sliding straps, spare tire, 295/75R22.5 tires, under deck box for cribbage blocks 303A 1998 Fruehauf Flatbed Trailer* VIN: 1JJF482F7WS487538, GVWR: 100000 lb, 101" x 48', 295/75R22.5 tires, includes sliding straps, toolboxes under deck 303B 2004 Great Dane Flatbed Trailer* VIN: 1GRDM96264M702282, GVWR: approx. 80000 lb, 101" x 48', 295/75R22.5 tires, includes all sliding straps, spare tire, box for cribbage blocks under deck 303C 2004 Great Dane Flatbed Trailer* VIN: 1GRDM96204M702293, GVWR: approx. 80000 lb, 101" x 48', 295/75R22.5 tires, includes sliding straps, spare tire, storage box for cribbage blocks under deck 303D 2000 Fontaine Step-Deck Trailer* VIN: 13N24830XY5994335, 100" X 10' upper deck, 22" drop, 38' main deck, 48' long overall, GVWR: approx 80000 lb., 255/70R22.5 tires, includes sliding straps, box for cribbage blocks under deck 303E 2004 Great Dane Flatbed Trailer* VIN: 1GRDM96205M701064, GVWR: 71000 lb, 101" x 48', 295/75R22.5 tires, includes sliding straps and storage for cribbage blocks under deck 303F 1992 Oshkosh Flatbed Trailer* VIN: 4MLP24828NB615001, GVWR: 80000 lb., 101" x 48', 295/75R22.5 tires, includes sliding straps, spare tires, storage for cribbage blocks under deck 303G 2006 Fontaine Drop-Deck Trailer* VIN: 13N25330863538309, 101" X 10' top deck, 43' main deck, 53' long overall, 255/70R22.5 tires, sliding straps, toolbox and cribbage block storage under deck 303H 2009 Fontaine Drop-Deck Trailer* VIN: 13N24820391549994, 101" X 48', 10' top deck, 38' main deck, 48' overall, GVWR: 69278 lbs., 255/70R22.5 tires 304 1987 Fontaine Lo-Boy Trailer* SN: 9916, 9'7" x 23'6" main deck, 30" x 9' ramps, 35' long overall, 245/70R17.5 tires 305 2005 Peerless Open Top Chip Trailer VIN: 1PLE045275PK54209, 45' long, 11R22.5 tires, 92" inside width, 98" inside height 306 2006 Peerless Open Top Chip Trailer VIN: 1PLE045215PG54871, 45' long, GVWR: 65,000 lb., 275/80R22.5 tires, 92" inside width, 98" inside height, has a spare tire 307 2012 Peerless Open Top Chip Trailer VIN: 1PLEO4525CPF57427, 45' long, GVWR: 65,000 lb., 295/75R22.5 tires, 92" inside width, 98" inside height, has spare tire 308 2005 Peerless Open Top Chip Trailer VIN: 1PLE045225PE54467, 45' long, 275/80R22.5 tires, 92" inside width, 98" inside height, GVWR: 65,000 lb., has spare tire 309 2009 Peerless Open Top Chip VIN: 1PLEO45239PF56284, 45' long, GVWR: 65,000 lb, 11R22.5 tires, 92" inside width, 98" inside height, has spare tire 310 2005 Peerless Open Top Chip Trailer VIN: 1PLE045255PK54208, 45' long, GVWR: 65,000 lb., 275/80R22.5 tires, 90" inside width, 98" inside height, has spare tire 311 2012 Peerless Open Top Chip Trailer VIN: 1PLEO4523CPF57426, 45' long, GVWR: 65,000 lb., 275/80R22.5 tires, 92" inside width, 98" inside height, has spare tire 312 1990 Fruehauf Van Trailer* VIN: 1H5V05320LM044569, GVWR: 68000 lb., 53' long, 295/75R22.5 tires, 99" inside width, 110" inside height 313 2005 Peerless Open Top Chip Trailer* VIN: 1PLE045245PE54468, GVWR: 65000 lb., 45' long, 275/80R22.5 tires, 91" inside width, 98" inside height 314 1997 Trailmobile Van Trailer* VIN: 1PTOIJAH7V6003294, GVWR: 65000 lb., 53' long, 11R22.5 tires, 99" inside width, 110" inside height 315 1997 Trailmobile Van Trailer* VIN: 1PTOIJAH7V6003330, GVWR: 65000 lb., 53' long, 295/75R22.5 tires, 99" inside width, 110" inside height 316 1974 Fruehauf Van Trailer* VIN: CHS193313, 48' long, 295/75R22.5 tires 317 1969 Fruehauf Van Trailer* VIN: MAK202601, 40' long, 11R22.5 tires, 92" inside width, 98" inside height, includes tires and rims in trailer 318 1998 Great Dane Van Trailer* VIN: 1GRAA0621WB181008, GVWR: 65000 lb., 53' long, 295/75R22.5 tires, 99" inside width, 108" inside height, includes all contents, tires, engine parts, hoses, filters, trailer and truck parts, etc. 318A 1988 Fruehauf Van Trailer* VIN: 1H2V05320JE003976, GVWR: 68000 lb., 53' long, 295/75R22.5 tires, 100" inside width, 109" inside height 319 2000 Hyundai Van Trailer* VIN: 3H3V532C4YT092019, GVWR: 65000 lb, 53' long, has spare tire, 295/75R22.5 tires, 99" inside width, 110" inside height 319A 2000 Hyundai Van Trailer* VIN: 3H3V532C6YT091003, GVWR: 65000 lb., 53' long, 275/80R22.5 tires, 99" inside width, 110" inside height 319B 1984 Fruehauf Van Open Top Trailer* VIN: FD9205, GVWR: 67200 lb., 40' long, 295/75R22.5 tires, 96" inside width, 7' inside height, includes all pallets in trailer, some good-some broken, includes spare tire 320 Log "Pup" Trailer 25' long, 90" wide x 60" tall bunks, pintle hitch, air brakes, 255/70R22.5 tires. Photo available online 321 Log "Pup" Trailer 93" x 60" tall bunks, 25' long, 102" x 54" dovetail, pintle hitch wit air brakes, 255/70R22.5 tires. Photo available online 322 1988 Trailmobile Log Trailer* VIN: 1PTF71TJ2J9002832, GVWR: 65000 lb. GAWR: 20000 lb., 6 bunk, 40' long, includes all straps, 275/80R22.5 tires, bunks are 91" x 5' tall 329 2017 Chevrolet Silverado 1500 Pickup Truck* VIN: 1GCVKPEC7HZ129842, GVWR: 7200 lb, 4WD, 269558 miles, Bluetooth radio, electronic display, double cab, 7' bed, automatic transmission, 5.3L Vortec engine. Good, running truck. 330 2000 Chevy K2500 Service Truck VIN: 1GBGK24R6YR221496 Meter reads: 191,404 miles Engine: 5.3L Vortec gas engine Transmission: Automatic Features and Notes: 80" x 8' service bed with fluids, hand tools, fittings, parts, welding rods, overhead rack, cutting torch with tanks and leads. Miller Bobcat 225T 8000 Watt generator/welder, 6 1/2" bench vise. Runs and starts good. 331 2005 Chevrolet Silverado Pickup Truck VIN #: 1GCHK24U15E344291 Mileage: 252,370 miles Body Type: Single cab Drive Line: 4WD Engine Type: 6.0L Vortec engine Fuel Type: Gasoline Transmission: Automatic Features and Notes: Long bed, runs and drives good. Includes stainless tool box. Does not include transfer fuel tank in pictures. 332 2007 GMC Sierra 1500* VIN: 1GTEC14CX7Z562162, GVWR: 6400 lb., meter reads: 177303 miles, 2WD, single cab, short bed, 4.8L Vortec engine, auto transmission, AC/Heat works great, includes toolbox. Good running pickup 333 2006 Chevy Silverado 2500 HD* VIN: 1GCHK24U66E108270, GVWR: 9200 lb., meter reads: 246417 miles, 6.0L Vortec engine, 4WD, auto transmission, single cab, includes tool box. Does not include fuel tank in pictures. Good running truck, AC works great! 334 2010 Chevrolet Silverado 1500 Pickup Truck* VIN: 1GCSKPE3XAZ178154, GVWR: 7000 lb, meter reads: 305,097 miles, 4WD, auto transmission, 5.3L Vortec engine, extended cab, 7' bed, 2" hitch recievers front and back. Good, running pickup 338 2009 Toyota Tacoma* VIN: 5TENX22N89Z639570, GVWR: 4650 lb., meter reads: 273299 miles, single cab, short bed, 2WD, auto transmission, 2.7L 4 cylinder engine. Good running pickup 340 Cosmo Flail Mower* Model: FL 145, SN: 18048079, made in 2018, 60" wide, pto and 3 point hitch 341 Shaktiman Roto-Tiller* Model: UM72, SN: AGBI101113039, made in 2018, 6' wide, pto hookup 342 Shaktiman Roto-Tiller* Model: UM72, SN: AGBI101113038, made in 2018, 5' wide, pto hookup 343 Frontier Hay Mower* SN tag missing, pto hookup and 3 point hitch, hydraulic cylinder for control, 8'6" cutting head width 344 Ideal Pull Behind Post Pounder* Kohler 14 hp gas motor, hydraulic controls and cylinders, ST225/75R15 tires, pin through hitch, has rack for holding posts, good condition 345 Ideal Post Pounder Attachment* Standard skid steer quick attach and hydraulic controls, 10 x 21 x 12" hydraulic tank. In good condition 346 Ideal Post Pounder Attachment* Standard skid steer quick attach and hydraulic controls, 10 x 21 x 12" hydraulic tank. In good condition 347 90" Snow Pushing Box Blade* Standard skid steer quick attach, made with 1/4" steel 348 90" Snow Pushing Box Blade* Standard skid steer quick attach, made with 1/4" steel 350 Electric Motors (4) 25-30 hp, 286T frame, 1470-1780 rpm 351 Howard Electrical Transformer 120/240 V, 240/480 V 352 Electric Motors (1) 75 hp, 1780 rpm, 365T frame, 230/460V, (1) 20 hp, 256T frame, 3510 rpm at 230/460 V 353 Electric Motors 8 total, 1-20 hp, bearings included 354 Electric Motors (1) 25 hp, 1180 rpm, 324T frame, (1) 7.5 hp, 213T frame, 1760 rpm, 460 V 355 Electric Motors 9 total, 1.5-5 hp 356 Electric Motor 40 hp, 324T frame, 230/460V 357 Electric Motors 7 total, (2) 5 hp 184T frame, (5) no tags-approx. 5 hp 417 Shop Press Self contained hydraulic unit, assorted blocking 358 Electric Motors (2) 25 hp, 284T frame, 460 V 359 New Electric Motor 5 hp, 182/4T frame, 1730 rpm, 230 V 360 Square D 3 PH Transformer 75 KVA 361 Lincoln Electric Motor 150 hp, 444T frame, 460 V, 1780 rpm 362 Lincoln Electric Motor 100 hp, 1780 rpm, 460 V, 405T frame 363 Pallet of Motor Frames 364 Electric Motors (1) no tag-approx. 30 hp, (1) 1 hp, 143TC frame, 1725 rpm, 460 V 365 Electric Motors (1) 60 hp, 1780 rpm, 460 V, 364T frame, (1) 30 hp, 1760 rpm, 286T frame, 460 V 366 Electric Motors (1) 50 hp, 1780 rpm, 326T frame, (1) 30 hp, 1760 rpm, 285T frame, (1) 40 hp, 460 V, 1780 rpm, 324T frame 367 Electric Motors and Gearboxes (1) 3 hp with gearbox, (1) 5 hp with 6:1 gearbox, (1) 5 hp, 1740 rpm, RX184T frame 368 Electrical Parts 3 crates of switches and breakers 369 Banding Cart Partial roll of 3/4" steel banding on cart, includes 3/4 box of clips and full roll of 3/4" banding 370 Pallet of Pulleys, Sprockets and Bushings 371 pallet of Electric Motors and Gearboxes 1-5 hp, 4 motors 434 Flat Conveyor Belt 3/8' x 30' length unknown 372 Pallet of Gearboxes 373 Pallet of Air Parts Air hoses, fittings, filters, compressor parts 374 Pallet of Paint Materials Spray paint, paint cans, rollers, tray 375 Pallet of Misc. Parts Conduit fittings, cylinders, hydraulic pump, oil pump, electrical components 376 Pallet of Hydraulics Pumps, hoses, fittings, valves 377 Banding Tools 3 crimpers, 2 strapping tools 378 Pallet of Electricals Lights, pedal controls, wiring, breakers, fuses, switches 379 Pallet of Assorted Bearings 379A Husk Wrenches 1 wrench, 2 tooth setters, 1 crowbar 380 10 Cubic Yard Wheelbarrow 381 Wheelbarrow 30 x 36' x 2 wheeled 382 Pallet of Husqvarna Chainsaw Parts Oil pump, router table 383 Pallet of Misc. Parts Motor and gearbox mounting plates, 7.5 hp motor, rollers 384 Crate of Belts Lots of new belts, for misc. equipment in sawmill 385 Pallet of Belts Lots of new belts, for misc. equipment in sawmill 386 Trash Pump 3" Yamaha pump powered by 300 cc Yamaha motor, includes hose and fittings, small 110 V sump pump 387 Pallet of Castors 2 rolls of H78 chain, wheels, 2 hydraulic pumps 388 3 Chip-Chute Adapters Fit precision chipper 389 Electric Motor 150 hp, 460 V, 1780 rpm, 445T frame 390 Electric Motor 50 hp, 230/460 V, 1780 rpm, 326T frame 391 Electric Motor No tag on motor, estimate 50-100 hp 392 Pallet of Ladder Back Chain 12" chain and rollers for log trough 393 Head for Morbark Debarker Main cutting head, includes covers 394 3 Drum Debarker Heads For Morbark debarker, all 16 x 20" 395 New Conveyor Belt Cleated, 30" wide, length unknown 396 New Conveyor Belt Cleated, 36' wide, length unknown 397 Conveyor Belts (1) 48", (1) 36" cleated, lengths unknown 398 Conveyor Belts 4-29" widths, lengths unknown 399 Conveyor Belts (4) 30" wide, (1) 28" wide, lengths unknown, like new condition 400 Conveyor Belts (1) 60", (1) 30", (1) 16" cleated, lengths unknown 401 Hand Tools 2 Shovels, 2 brooms, scraper, cant hook 402 Hand Tools 2 Shovels, 2 brooms, scraper, cant hook 403 Hand Tools 2 Shovels, 2 brooms, scraper, cant hook 404 Hand Tools Shovels, brooms, cant hook, 6' step, 300 lb. capacity ladder 404A Bucksaw Rack 5' x 10', good condition 404B 3/4" steel Banding 12 full rolls of new banding 404C Stacking Rack 16 x 60 x 54" tall 405 Wheelbarrow Single wheel 406 Wheelbarrow 2 wheeled 407 Barn Sweep Paddles and Chain 18" paddles 408 Poly Deck Strips and Metal Bracing (8) 32" long braces, 1/2-3/4" thick poly 409 Rack with Angle Iron 410 Rack with Flat Steel 411 Rack with Scrap Shafts 30 x 30 x 42" rack 412 Crate of Roller Chain 413 Pallet of H78B Chain 414 Pallet of Chain 15 rolls of H78, 2 rolls of regular chain 414A Fuel Tank on Stand 38' x 5' long, on stand bolted to skid, 43 x 68 x 70" tall overall 414B JET Metal-Cutting Bandsaw* 110 plug-in, on castors 414C Lemas Metal Bender* Model: LH-3RS, SN: 329025, made in 2007, capacity 75 x 75 x 9.0, electric drive, portable control stand, electric box, hydraulic cylinder 414D Portacool Fan* 110 Plug in, water hookups, has water pump, 40 x 75 x 85" tall, 48" fan, 2 speed 414E Horn Bend Pro G2 Horizontal Tube Bender* Bends up to 3" pipe, includes operator's manual, (2) 480 V electrical boxes, computerized control panel, 40 hp electric motor with hydraulic pumps, valve station and cooling unit, 7' x 22' overall, buyer will need to arrange loadout by appointment. Good, working machine just no longer in use. 415 Pallet of Paddle Chain 34" wooden paddles 416 Pallet of Chain Roller chain, H78B, chain with pegs 418A 5 HP Hydraulic Pack* 32 x 16 x 16" tank, cooling unit, valves, electric box 418B Rousselle 6F Press* SN: 16960, Tonnage 60, 3 stroke, 12 1/2" shut height, 75-150 strokes/min electric drive, 460V cutout box 418C Steel Break* Electric drive, 6' wide 418D Willis-Bergo Radial Arm Drill Press* 4 prong plug in, 30 x 78 x 80" tall, 6 speed, good condition 419 New Shaft Stock (1) 2 1/8" x 10', (1) 1 15/16" x 4', (1) 2 15/16' x 12', 2 short pieces 420 Barrel Dolly Motor Oil 15 gallon Morlina oil SD220, Barrel dolly 421 Tivar, Sawhorses, and Steel Wear Plate (1) 1/2" x 4' x 8', (1) 1/2" x 3' x 8', (1) 3/4" x 32" x 8', (1) 3/4" x 7" x 8', 13' steel wear plate, 4' sawhorses 422 Cant Hook and Air Hose 3 air hoses, 48" cant hook 423 Brooms, Shovels, and Scraper 5 brooms, 9 shovels, 1 scraper 424 Louisville Step Ladder Fiberglass 8' ladder 425 Shop Hoist 1/2 Ton SM-01, 110 V 426 Rack wit Shaft Stock Several pieces, 1 15/16" x 12', assorted shaft pieces 427 Board Stops For deck on resaw runaround 428 Parts Lot New seat for cab, V belts, 1/2" air hose 429 Steel Crate with Parts 7" flat 3 piece length unknown, gearbox, air cylinder, bolts 430 Wire Create with Parts Flat belt, assorted parts 431 Shell Hydraulic Oil S2MX46, 1 new barrel, 2 barrels with pumps-feel full, spill box 432 New Barrels (1) barrel Shell Rotella TI SAE 10W motor oil, (1) barrel Shell Tellus S2 MX 46 hydraulic oil, (1) barrel Anchor seal 2 summer formula 433 Wire Create V belts, 40' x 40" crate, 1/2" x 52" x 35" 435 Barrel Lift Slips on forks 436 Cabinet with Parts 6' x 72' x 26", assorted new sprockets 437 Extension Cord 4 wire cord with plugs 438 Guard Fence 70" high, 2-54" section with door, (1) 10', (1) 54' 439 Hoist A-Frame 116' inside, adjustable height 7' to 11' 440 Cox Reels, Air Hose Reel, and Cord Reel Retracting reel, includes hose, extension cord on reel 441 Barrel Hydraulic Oil with Pump Spill tray, hand pump, full barrel, shell S2MX32 442 Floor Stand Fan 18" electric drive 443 Storage Box 48' x 24' x 24', steel box, all contents 444 Corley Parts for Carriage and Husk Dogs for carriage, bearings for carriage, cant kicker cylinders, computer control board, saw guides, Joystick handle, air valves 445 Corley Resaw Parts New shaft and bearings for top wheel, air cylinders, air valves, new cylinder and control valve for line bar feed, hydraulic motors, assorted filters and parts 446 Edger Parts Log Turner Cylinder Sliding bearings for edger, new shaft for edger, cylinders for bar turner, encoders, saw guide blocks 447 Morbark Debarker Parts Hydraulic cylinders, motors, valves, relief valves, filters, drum spikes, lots of new parts 448 Slab Dump Parts (2) air cylinder, 8" bore 12" stroke, new 3/8" x 30" belt for slab dump, seal kit, (1) 24" belt no lacing 449 Precision Chipper Parts (3) new bearings, new knife holders, counter knives, knife clamps, anvils, paddles, bolts, swivel rod ends, anvil plate, probably enough parts to redo 3 chippers 450 Flexco Belt Lacing Tool and Parts Toolbox with tools and parts, lots of lacing supplies 451 Electric Motors and Gearbox 2 motors special order for edger, browning 1.5 p with gearbox, Nema 5 hp motor 543 Hydraulic Pumps and Gearbox New Quantis gearbox used on resaw, new Vickers pump for debarker, Vickers pump PUB45A RSF 10 CAII-387539, tension bars 544 Laser Lights, Volvo Parts, and Tempasonic Rod 4 new Laser Blazer lights, 2 used lights, Volvo pins, light, door latches, 1 new Tempasonic rod 545 Heaters, Lamps, Chipper Blade Grinder 9 electric heaters, heat lamps, DeWalt chipper blade grinder with discs 546 Hose Supplies and Hand Tools DeWalt saws, 1/2" Milwaukee impact, assorted hoses 547 Webster Vibrating Conveyor Drive and Parts New drive for Webster conveyor, bushings for Precision conveyor, 30" planer knives, new bearing Dodge FC-S2-215RE 2 15/16' 567 Miller Welder Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads 548 Cylinders and Parts New air cylinder for cant pusher 6" bore 40" stroke, cylinder for carriage 568 Miller Welder Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads 549 Schneider Starter and Parts Schneider soft start used on Corley resaw, wiring for resaw, Toggle switches,, grease guns, panel for Trimmer control, air foot valve 550 Hubs and Sprockets Bearings Lots of new Sprockets, Timken bearings 570 Miller Welder Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads 594 Loader Tires Michelin, XHA2, 3 new tires, 20.5/R25 tires, 1 used may need patched 551 Split Sprockets and Hubs Lots of new hubs and sprockets 571 Miller Welder Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads 552 Tsubaki Roller Chain and End Evener Web Parts (2) 100D Tsubaki chain (extra hard), steel web for end evener, plus sprockets, Morbark debarker shield 553 Domestic Brisk II AC Unit New rooftop air conditioner unit, 3 7/16" x 38" debarker shaft 573 Miller Welder Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads 554 Morbark Debarker Head and Cart Debarker head 32" shaft, 48" x 24" cart on wheels, fall restraint harness 555 Shop Cart on Wheels 40" x 18", all contents 556 Parker Carriage Drive Pump Connector bushing, fan pulley 557 Parker Hydraulic Motor Carriage Drive New motor for carriage drive, LB 31878 558 Oil and Air Filters Assorted filters on skid 559 Roller Chain Lots of new roller chain, assorted sizes 560 Tire Changer Cordless Grease Guns Lots of hand tools, DeWalt grease gun, Milwaukee grease gun, portable air over hydraulic tire changer 561 Buck Saw 6', extra blade and chains 562 2 Mandrel Shaft 2 15/16" x 11' with 8" collar, same on Corley mill, 2 7/16" x 11' with 8" collar, new shafts 562A Information Lot The following welders were taken out of production at Tarter Gate and were functioning properly when removed from production. 563 Miller Welder Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads 564 Miller Welder Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads 565 Miller Welder Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads 566 Miller Welder Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads 569 Miller Welder Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads 572 Miller Welder Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads 574 Miller Welder Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads 575 Miller Welder Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads 576 Miller Welder Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads 577 Miller Welder Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads 578 Miller Welder Model: CP-302, SN: MC280244V, 5 pieces, 300 amp output, 3 ph electric, no wire feed unit 579 Miller Welder Model: CP-302, SN: MC280244V, 5 pieces, 300 amp output, 3 ph electric, no wire feed unit 580 Miller Welder Model: CP-302, SN: MC280244V, 2 pieces, 300 amp output, 3 ph electric, no wire feed unit 581 Miller Wire Feed Units 60 series, (1) 75 series, most units tested ok 582 Tweco Mig Welding Gun 2 Welding guns, torch hose, shield 583 Miller Welder Model: CP-302, 300 amp output, 3 ph electric, 60 series wire feeder, 588-70 series, 590-70 series 584 Miller Welder Model: CP-302, 300 amp output, 3 ph electric, 60 series wire feeder, 588-70 series, 590-70 series 585 Miller Welder Model: CP-302, 300 amp output, 3 ph electric, 60 series wire feeder, 588-70 series, 590-70 series 586 Miller Welder Model: CP-302, 300 amp output, 3 ph electric, 60 series wire feeder, 588-70 series, 590-70 series 587 Miller Welder Model: CP-302, 300 amp output, 3 ph electric, 60 series wire feeder, 588-70 series, 590-70 series 588 Miller Welder Model: CP-302, 300 amp output, 3 ph electric, 60 series wire feeder, 588-70 series, 590-70 series 589 Miller Welder Model: CP-302, 300 amp output, 3 ph electric, 60 series wire feeder, 588-70 series, 590-70 series 590 Miller Welder Model: CP-302, 300 amp output, 3 ph electric, 60 series wire feeder, 588-70 series, 590-70 series 591 5 Miller Welder Model: CP-302, 300 amp output, 3 ph electric, no welding leads, no feed unit 592 Miller Welder Model: CP-302, 300 amp output, 3 ph electric, no welding leads, no wire feed unit 592A Miller Welder* Model: CP-302, no SN tag, 4 prong plug, 592B Miller Welder* Model: CP-302, SN: LC456392, Miller 60 series, wire feeder, 4 prong plug 592C Miller Welder* Model: CP-302, SN: LG280145C, 200/230/460V, 4 prong plug 592D Miller Welder* Model: CP-302, SN tag is missing, 200/230/460V, 4 prong plug, Miller 70 series 24 V wire feeder 592E Miller Welder* Model: CP-302, SN: KK303259, 200/230/460V, 4 prong plug, Miller 70 series 24 V wire feeder 592F Miller Welder* Model: CP-302, SN: LB089213, 200/230/460 V, 4 prong plug, Miller 70 series 24 V wire feeder 592G Miller Welder* Model: CP-302, SN: ME130125V, 200/230/460V, 4 prong plug, Miller S60 24V constant wire feeder 592H Miller Welder* Model: CP-302, SN: LF430122C, 200/230/460V, 4 prong plug 592I Miller Welder* Model: CP-302, SN: ME130417V, 200/230/460V, 4 prong plug 592J Pallet of Brand New Gates Hydraulic Hoses* 1/2" hoses with fittings 592K Steel Pins* (160) 1 1/4 x 5", (111) 1 1/4" x 7" 592L Bolts and Fittings* (1,000) 1/4" hydraulic fittings for skid steer attachments, (200) 1 1/4" x 9 1/2" bolts with 1 7/8" head 593 Pallet of New Attachment Parts* Spindles, nuts, and studs for skid steer attachments 593A Pallet of New Hydraulic Cylinders* (Approx. 60) 24", for skid steer attachments, 593B Pallet of New Attachment Parts* Spindles and nuts for skid steer attachments 593C New Hydraulic Valve Stations* 15 pieces 593D New Hydraulic Cylinders* (70) 24", for skid steer attachments 593E Plate Steel* (420) 3/8" x 12" x 12" 593F Plate Steel* (168) 3/8 x 12 x 12" 593G Plate Steel* (280) 12 1/2 x 49"-14 gauge 593H Plate Steel* (140) 12 1/2 x 49"-14 gauge 593I Plate Steel* (267) 12 1/2 x 49"-14 gauge 593J Plate Steel* (Approx. 140) 12 1/2 x 49" - 14 gauge 593K Plate Steel* (Approx. 250) 12 1/2 x 49"-14 gauge 593L Plate Steel* (Approx. 400) 12 1/2" x 49"-14 gauge 593M Plate Steel* (300) 12 1/2 x 49"-14 gauge 593N Plate Steel* (400) 12 1/2 x 49"-14 gauge 593O Plate Steel* (400) 12 1/2 x 49"-14 gauge 593P Plate Steel* (400) 12 1/2 x 49"-14 gauge 595 Wire Crate with Belts Lots of new v-belts, assorted sizes, 48' x 48" x 30" crate 596 Ingersoll Rand Air Compressor Model: SSR-EPE50, 208 CFM, 50 hp electric, hours unknown, was running when taken out of service 597 Ingersoll Rand Air Compressor Model: SSR-EP15U, 55 CFM, 15 hp electric motor, was running when removed from service 598 Amerex Fire Extinguisher Portable unit with pintle hitch. Last tested 6/21 598A Pallet of Misc.* (1) 5 hp motor, (1) 1/2 hp motor, gearbox, chain, motor stand, pipe clamp 599 ZEKS-Therm Air Dryer Model: 400 H SBA 400 600 Steel Flat Stock 1/2" x 4' x 8', one corner cut out 601 Steel Flat Stock 1/4" x 4' x 8', 1 full sheet, 1 part piece 602 Stake Pointer 2 heads, 5 hp electric 603 Air Tank Vertical tank, 3' x 7' 604 New Loader Forks 6" x 44", round hole mount loader forks, 2" hole 604A Vibrating Conveyor* 18" pan, 9" flared sides, 2 sections, includes chipper infeed section, 31" x 33'6" total, no drive 604B 2 Yard Self Dumping Hopper* Has fork pockets, 5500 lb. capacity 604C Cantilever Rack* In 2 pieces, 68" x 12'8" tall 604D Cantilever Rack* In 2 pieces, 68" x 12'8" tall 604E Loader Forks* 6 x 48" forks, 20" slot spacing 604F Jib Crane Attachment* 10' long, 5 1/2" fork pockets-19" apart 604G Lumber Carts* (1) 44 x 74", (1) 29 x 74" 604H Fuel Tank for Truck* 2' x 5' 604I Rack with C-Channel Steel* 26 x 30" rack, 3" wide, 54"-9' long, 1/8" thick 604J Pallet of Misc. Steel* 604K 2 Barrels of Tire Chains* For 11R22.5 tires 604L Pallet of Tire Chains* For 11R22.5 tires 604M Fuel Transfer Tank with Pump* 28 x 48 x 16", GPI 15 psi, 12V pump, 60 gallon capacity 604N Transfer Tank and Toolbox* 32 x 50 x 20" tall, 74 gallon capactiy, 12V 15 gpm pump, 16 x 48 x 9" deep toolbox section 604O Lumber Cart* 40 x 60 x 42" tall 604P Tube Steel* 4 x 7 x 128" 604Q Tube Steel* 4" x 4" x 15'10" 605 4 Strand Log Deck 11' x 18', 12'1" overall width, electric drive 606 Material Rack* Has fork pockets, 55" x 78" x 8' tall 607 Material Rack* 28" x 8' x 50" tall 608 Lumber Cart* 44 x 60" 609 Hydraulic Press* 13 x 34 x 16" tank, electric drive 610 25 HP Hydraulic Pack* 25 x 37 x 18" tank, electric box 611 Catwalk Steps* New condition. 36 x 70 x 80" tall 612 Material Rack* Has fork pockets, 64 x 72 x 90" tall 613 Overhead Hoist Frame* 5' x 10'4" x 8' tall 614 Log Deck Strands* 6 strands total, 8' long, fits up to 3 3/4" wide chain 615 Forks* 5 x 48" forks, 16" slot spacing 616 Forks* 5 x 52" forks, 16" slot spacing 617 Material Rack* 44 x 52 x 38" tall 618 Steel Table* 55 x 60 x 38" tall 619 Hydraulic Pack* Electric motor, hp unknown, 25 x 42 x 25" tank 619A Twin City Fan and Blower Unit* SN: 0015029411, size: 402, type: AFPL, 15 hp electric motor, 2 3/16" shaft, 55 x 55" frame, 5" x 100" pipe 620 Froedge Roll Case* Model: 40315, made in 2000, electric drive, 6 1/2 x 36" rolls, 18" spacing, 4' x 13' overall 621 Froedge 4 Strand Transfer Deck* H78B turtletop chain, hydraulic drive, 5' x 15'6", side rolls 622 3 Strand Transfer Deck* 9' x 14', no drive, H78 chain 623 Chipper Chute and Pipe* Steel 12" elbow chipper chute, 20" x 17'6" steel pipe section 624 4 Strand Transfer Deck* No chain or drive, 9'6" x 11'6", disassmebled, fits 3 1/2" chain 625 Hydraulic Press* Hydraulic cylinder, 12" x 12' x 3' tall up to 2 1/2" pipe 626 Pipe Bender* 3' x 24' frame, up to 1 3/4" pipe, (2) bending heads with hydraulic cylinders and valves, electric control box 627 Diesel Fuel Tank and Spill Containment Box* 4' x 11' tank with electric pump, 5' x 12'6" box 628 Rubber Floor Mats* 4' x 6' x 3/4" thick, 7 pieces 628A HS 1/4 Ton Overhead Hoist* Does not include a chain hoist, 11' long cross beam, 13' tall post (in 2 pieces) 628B Incline Belt Conveyor* No motor, has 480V cord, 56" belt, 6' x 12' x 112" tall, mounted on castors, has steel welded across top to make height capacity 1 1/2" 628C Steel Tube* 20" x 17' long, 22 x 29" cover on 1 end 628D Cantilever Rack* (2) 68" x 10' tall 628E Steel I-Beam* 6" x 18" x 50' long, has 9" wide C-channel on 1 side 628F Ventilation Pipe* Approx. 100' of 36" pipe, 2 elbows, 2 adapters, 1 vent, will include all flanges. 629 Material Rack* Has fork pockets, 4 x 10 x 4' tall 630 Material Rack* Has fork pockets, 7' x 8' x 52" tall 631 Pallet Racking* (18) 16' long "L" brackets, includes all supports and crossbraces 632 Jib Crane* 5" fork pockets-30" apart, 3' x up to 10' wide 633 Jib Crane* 5" fork pockets-30" apart, 3' x up to 10' wide 634 Material Cart* 2 tier, 6' x 6' x 52" tall 635 Material Cart* 2 tier, 6' x 6' x 52" tall 636 Material Cart* 2 tier, 6' x 6' x 52" tall 637 Material Cart* 2 tier, 6' x 6' x 52" tall 638 Steel Table* 45 x 60 x 28" tall 639 Loader Forks* 6 x 42" forks, 3' tall 640 Steel Shelf* 3' x 12' x 68" tall 641 Material Cart* 2 tier, 6' x 6' x 52" tall 642 Material Cart* 7' x 8' x 80" tall 643 Steel Landing Table* 100" x 122" x 18" tall 644 Steel Landing Table* 100" x 122" x 18" tall 645 Steel Rack and Blow Pipe* 4' x 6' rack, steel pipe, (1) 12" x 6' pipe, (1) 12" x 16' pipe 646 Skate Rolls* 54" x 10' x 18" tall, 2 1/2" x 50" rolls, 3" spacing 647 Skate Rolls* 54" x 10' x 18" tall, 2 1/2" x 50" rolls, 3" spacing 648 Skate Rolls* 54" x 10' x 18" tall, 2 1/2" x 50" rolls, 3" spacing 649 Rack with Angle Iron* 44 x 44" rack, 2 1/2-3" angle iron, 6" table steel 650 Steel Storage Bins* (4) 44 x 54 x 38" deep 651 Steel Storage Bins* (4) 44 x 54 x 38" deep 652 Steel Storage Bins* (4) 44 x 54 x 38" deep 653 Steel Storage Bins* (4) 44 x 54 x 38" deep 654 Steel Storage Bins* (4) 44 x 54 x 38" deep 655 Steel Storage Bins* (4) 44 x 54 x 38" deep 656 Steel Storage Bins* (4) 44 x 54 x 38" deep 657 Steel Storage Bins* (6) 44 x 54 x 38" deep 658 Steel Storage Bins* (4) 44 x 54 x 38" deep

Close X

Gallery Images Loading, Please Wait...

Close X

Save this sale to your Saved Sales list!

Your Saved Sales list is an easy way to return to sale listings which are of interest to you.

Login

Username:

Password:

Sign Up

FREE EMAIL NOTIFICATIONS
estate sale listings delivered to your inbox

Close X

Sign Up

FREE EMAIL NOTIFICATIONS
estate sale listings delivered to your inbox

Login

Username:

Password:

Close X

Return

Sawmill Equipment Liquidation & Rolling Stock - Dunnville, KY

Live Auction

View Gallery (575)

Sale Date(s)

Thursday Aug 17, 2023 Completed

Sale Location

Dunnville, KY 42528

View Map

Company

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

Listing Terms and Conditions

Bidder Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

“Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction.
“Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected.
“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.
“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.
“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account.
“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.
“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.
“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot.
“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot.
"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.
“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.
“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.
“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.
“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.
"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.
“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.
“Personal Property” means all tangible and moveable property, including fixtures, designated as Property.
“Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer.
“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).
“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.
“Property” means the Real Property and the Personal Property.
“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium.
"Registered Bidder" means a person or entity that has registered to bid at the Auction.
“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.
“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.
“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.
“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.
“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller).
"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.
“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
Governing Law.
1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
9. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
10. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
11. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
12. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.

1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.

Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers.
ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyers account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information.
Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.

No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.
Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Preview Information
Day before auction or by appointment. Call Eugene 574-242-1100
Location of auction: 11346 US 127 Dunnville, KY 42528

Loadout Information
Bright Star will staff loadout for Friday, Monday-Thursday of the following week.

Heavy Equipment Key Set 36 Keys
Shipping available for $20

Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

Chipper Knife Dresser
Series I, electric drive

Jockey Grinder
Model: 06H, Milwaukee drill powered

99A

Cedar by Juniper Tallying System*
1 phone reader, 1 scanner, 5 controllers, includes chargers

100

100A

Lincoln Electric Motor
(Part of an entirety) 125 hp, 1785 rpm, 405T frame, WYE Delta starter, cutout box

101

Morbark Log Trough
(Part of an entirety)2006 Model: 25-in, SN: 1060, web chain 13", one end lift, legs to first beam, hydraulic drive, 25' long

102

Morbark Log Trough
(Part of an entirety) 2006 Model: 30-out, SN: 1060, 11" ladderback chain, hydraulic drive, 2 way kickers, no support structure, 30'

103

Morbark Operators Cab
(Part of an entirety) 4'6" x 5', AC unit, all control valves for debarker, electric control boxes, no support past legs, no catwalk or stairs

104

Morbark Paddle Conveyor
(Part of an entirety) 36" pan x 35', 13" sides, hydraulic drive

105

Morbark Paddle Conveyor
(Part of an entirety) 36" pan x 40' elevated, hydraulic drive

106

Support Structure with Stairs and Catwalk for Debarker
(Part of an entirety) 6" x 10" tube top rail, 6"x6" tubing post, 4"x4" tubing post for cab, stairs with railing

107

Morbark Debarker Entirety of Lots 100-106
With 10% raise

108

Morbark 3 Strand Log Deck
2006 11' x 24', stop'n'load, Tulsa winch gear box with hydraulic motor, gears are showing some wear, support to first beam or posts, catwalk on side

108A

Morbark Log Bunks
87" x 128", Log catching bunks

108B

Tulsa Winch Gearbox with Hydraulic Motor
In good condition

109

Corley 3 HB LP Carriage
(1st of an entirety) Installed new in 2000, 110 V over air controls, cant kickers, pantograph arm with support post, no controls, 16' x 10' overall

109A

Lewis Scanner Controls for Carriage
(Part of an entirety) 20' scanner bar, includes mounting beam, all controls in cab related to Lewis controls

110

Corley 56" Circular Husk
(Part of an entirety) 56" saw, 42" topsaw, 24" x 6' live off bear belt, 21" belt, saw wrench, no power

111

Lincoln Electric Motor
(Part of an entirety) 200 hp, 1785 rpm, 445T frame, 600 amp, 480 V fuse box

112

Baldor Solid State Soft Start
(Part of an entirety) 200 hp

113

Corley Operators Cab
(Part of an entirety) 11' x 54", no controls

114

Hydraulic Pack for Carriage Controls Berendsen Fluid Power
(Part of an entirety) 20 hp electric, 15 gallon per min., 1800 psi, 60 gallon tank, electric cut out spill tray

115

Carriage Track and Frame
(Part of an entirety) 54 1/2' center to center x 55', end stops, no support structure

116

116A

WYE Delta Starter and Cutout
(Part of an entirety) 100 hp, cutout box, used on carriage feed

117

Corley Mill Entirety of Lots 109-116
With 10% raise

118

Corley Bar Type Log Turner
5' bar, hydraulic drive, control valve in cab

119

Electric Hydraulic Pack
50 hp motor, 34" x 23" x 25" tank, line to valve and turner

120

Corley 3 Strand Log Deck
11' x 48' includes 4' nose skids, 13'8" overall width with side rail, electric drive, hydraulic stop'n'load

121

Dayton Dust Blower
18" blower, 8" inlet, 4" outlet, 5 hp electric drive

122

Slab Dump Belt
42" x 15', 30" x 13' belt, electric drive, air cylinder raise

123

Corley Cant Catcher
Installed new in 2019! 11' long x 9'6" wide, 42" stroke on pusher, air cylinder drive, no support structure

124

Live Roll Case
40" x 60', 2 separate drives, electric drive, 6 1/2' x 30" rolls, no support past legs, trip switch

125

3 Strand Pop-Up Transfer
9' x 8'6", electric drive

126

Baren Gang Edger
4 blades 18", laser blazer, laser lites, 2 movable blades, 2 tailing belts (1-16" x 30', 1-6" x 30'), 75 hp electric, no support structure, 6" x 48" capacity

126A

Edger Blades
18", 3" arbor, freshly sharpened, 28 blades

126B

Saw Blades
(2) 20' with 1" arbor, (2) 18" with 1" arbor

128

128A

Nema Electric Motor
(Part of an entirety) 200 hp, 1190 rpm, 449T frame

129

Operator Cab with Lewis Control Center
(Part of an entirety) All controls for resaw, steps and platform, AC unit, leg supports to first beam

130

Corley Line bar Feed
(Part of an entirety) SN: 16477, date: 1/16/2018, 2018 LB41, side press roll with hydraulic drive, hydraulic feed rolls

131

Corley Cant Infeed
(Part of an entirety) Pickup and placement roll case, side transfer chains, cant stops, hydraulic drive, 14' x 5'4" overall, 9" x 24" rolls

132

Corley Outfeed Board Separator
(Part of an entirety) 7' x 20' overall, 9" x 36" rolls, lifting end roll, two way chain sorter, board and cant splitter, hydraulic drive

133

Hydraulic Pack for Resaw
(Part of an entirety) 15 hp electric, valve bank, hoses to resaw, oil cooler, 27' x 47" x 15" tank

134

4 Strand Transfer
(Part of an entirety) 11' x 10'9", 4' tipple arms, end shaft is connected to next deck but can be removed, no support to ground

135

Corley 180° Transfer
(Part of an entirety) 4 strand, DF3500 chain, legs to first cross beam, 10'6' wide, 38' wide overall, electric drive, includes steps

136

Corley 4 Strand Transfer with Cant Turner
(Part of an entirety) 12' x 14', cant stops, cant turner, electric drive, legs to first beam

137

Operators Cab with Controls
(Part of an entirety) 5'x5', AC unit, Lewis controls for runaround and cant turner, legs to first beam

137A

Hydraulic Pack for Resaw Line
(Part of an entirety) 40 hp electric with 2 pumps, 25 hp electric with 2 pumps, oil cooler, 53 1/2' x 47 1/2" x 24" tank, mounted on spill tray

138

Square D Motor Control Center
(Part of an entirety) 600 V, 800 amp, 8 sections, all motor controls for resaw line

139

Resaw and Runaround Entirety of Lots 128-138
With 10% raise

140

Corley 4 Strand Transfer Deck
9'6" x 24', cant stop, electric drive, 4 arm cant pickup

141

Belt Conveyor
35" x 21', 25' pan, 10" side, no support structure, electric drive

142

4 Strand Transfer Deck
11' x 28' flat plus 14' on slant, no legs or support structure, 4' tipple arms, no lift cylinder

143

Belt Conveyor
32" x 28', 25" pan, 24" belt, 42' tipple arms with skate rolls, electric drive, legs to first beam

144

Belt Conveyor
35' x 28', 25" pan, 24" belt, electric drive

145

4 Strand Transfer
11' x 13', H78B rooftop chain, with cant stop, electric drive, 11'10" wide overall, steps on side, no legs past first I beam

146

4 Strand Transfer
9'6" x 13', H78B rooftop chain, with cant stop, electric drive, air controls, no legs past first I beam

147

6 Strand Elevated Transfer Deck
12' x 11'6", only 3 strands have chain, electric drive, support to ground

148

148A

Trimsaw Blades
New in 2018, 26" with 1 3/8' arbor, 21 blades, freshly sharpened

149

Grading Deck and Length Sorting Deck
New in 2018, 12'6" x 20' with spiral end evener rolls, 6 strand transfer chain, length sorting switches, electric drive

150

Froedge 3 Strand Transfer Deck
New in 2018, 9'6" x 17', electric drive

151

Froedge 6 Strand Elevated Deck
New in 2018, 10'6" x 10', electric drive

152

Froedge Unscrambler 6 Strand with bars
New in 2018, 12' x 13' tall, 3 sections of bars, phot eye sensor

153

4 Strand Transfer Deck
New in 2018, 10' x 7', no support past first I beam, electric drive

154

4 Strand Transfer Deck
New in 2018, 9'6' x 24', electric drive, H78B rooftop chain, steel decking, no support past first I beam

155

4 Strand Transfer Deck
New in 2018, 10' x 20', H78B rooftop chain, no sprockets on one end, attached to 154, no support past first I beam, electric drive

156

6 Strand Waterfall Unscrambler
New in 2018, 16' x 8' x 68" tall, 3 sections of bars, electric drive, no support structure

157

5 Strand Elevated Transfer Deck
17' wide overall, 10' long strands, drop down deck from trim saw, no drive, no shaft or sprockets on top end

158

4 Strand Green Chain
10' x 80', steel decking, electric drive

159

Lumber Carts
60" x 42' x 32" posts, straight steel wheels, 5 carts

160

Lumber Carts
60" x 42' x 32" posts, straight steel wheels, 5 carts

161

Lumber Carts
60" x 42' x 32" posts, straight steel wheels, 6 carts

162

5 Lumber Carts
60" x 48" x 32" posts, straight steel wheels

163

5 Lumber Carts
60" x 48" x 32" posts, straight steel wheels

164

4 Lumber Carts
60" x 48" x 32" posts, straight steel wheels

165

3 Lumber Carts
(2) 60" x 41 x 32" posts, (1) 60" x 48" x 32" posts, straight steel wheels

166

1 Lumber Cart
6' x 4' x 2' posts, heavy built

166A

Lumber Rack
50" x 8' with board stop

167

Self Dumping Hopper
54' x 60" x 32'

168

Self Dumping Hopper
6' x 5' x 40"

169

9 Lumber Carts
60" x 42" x 32" posts, (1) 48" wide, straight steel wheels

170

3 Strand Transfer Deck
9'6" x 21'6", heavy duty deck, electric drive

171

Precision Chipper
(1st of an entirety) Model: 58-15, SN: C-3379, 6 knives, pipe adapter

172

Neidec Electric Motor
(Part of an entirety) Includes WYE Delta Starter, cutout box, 150 hp, 1790 rpm, 445T frame

173

Precision Shaker Screen
(Part of an entirety) Size: 8 x 6, SN: S-1719, electric drive

174

Chip Cyclone with Pipe
(Part of an entirety) 4' cyclone, pipe to chipper

175

Precision Chipper Entirety of Lots 171-174
With 10% raise

176

Concave Belt Conveyor
41' x 52', 30" belt, electric drive

177

Harvest Handler Elevator
12' x 16', 6" pan, 5" paddles, electric drive

178

Webster Vibrating Conveyor
Model: FSH, size: 24-33, 38' with chipper chute, 24" pan, 10" sides

179

Webster Vibrating Conveyor
Model: F5H, 90' long 24" pan, 10" sides, size 24-33, electric drive

179A

Precision Vibrating Conveyor
28" x 55', 18" pan, 8" sides, 7.5 hp electric drive

179B

Precision Vibrating Conveyor
Model: 20FT, SN: V2354, 30" x 30', 18" pan, 8" sides, electric drive

180

Barn Sweep Conveyor
47" x 50', elevated, 18" paddles, electric drive

181

Precision Chipper
Completely rebuilt, SN: C-2996, Size 58-15, no pulley, 6 knives with knife jig

182

2018 Iseli RZI Auto Leveler/Tensioner
New in 2018!! Model RZI, SN: 844211, computerized auto leveler, wooden work platform, in good condition

183

Iseli BNP 100 Auto Band Sharpener
NEW IN 2018!! SN: 844221, computerized auto sharpener, dust collector unit, in good condition

184

Armstrong Back Clamp and Stands
Adjustable height, 4 stands one has feed cylinder

185

Armstrong Stretcher Roll
(1st of an entirety) #4, SN :56SR-133, electric drive

186

Armstrong Welding Clamp
(Part of an entirety) Model 62, #16 welding clamp

187

Armstrong Hammering Bench with Anvil
(Part of an entirety) 4" x 4' x 12" anvil, floor rolls, tools on bench

188

Armstrong Hammer Bench and Roller Entirety of Lots 185-187
With 10% raise

188A

Armstrong Anvil
12" x 48" x 4"

189

Precision Tub Grinder
Model 6K-440, SN: PAG945, 6 knife 20" capacity, 2 new extra stones, sump defoamer, electric drive

190

Simonds Chipper Knives and Bench
(18) 19 1/2' new knives, (6) 19 1/2" used knives, 24" x 48" workbench, shelf with parts

191

Jet Drill and Mill Machine
Model: JMD-18, SN: 1805552, set up to dress guides, carbide cutter, vacuum dust collector,

192

M+J Guide Dressing Machine
Sliding block holder, electric drive

193

Shelf with Guide Blocks
1 1/2' x 13" guide blocks, some new, contents of 2 shelves

194

Armstrong Swage and Shaper on Cart
#6900 shaper, Hanchett #54/55 swage air powered, 24" x 48' cart, contents of cart, parts for swage, new grinding wheels

195

Steel Work Table on Casters
42' x 33', 1/2" steel top

196

Belt Sander and Vise on Cart
36" x 23' steel cart, 1" x 30" belt-5" disc sander, 5" vise

197

Simonds 56' Circle Saw Blade
F style, new carbide teeth installed, good saw

198

Simonds 56' Circle Saw Blade
F style, new carbide teeth installed, good saw

199

Simonds 56' Circle Saw Blade
F style, new carbide teeth installed, good saw

200

Simonds 56' Circle Saw Blade
F style, new carbide teeth installed, good saw

201

Simonds 56' Circle Saw Blade
F style, new carbide teeth installed, good saw

202

Simonds 56' Circle Saw Blade
F style, new carbide teeth installed, good saw

203

Simonds 56' Circle Saw Blade
F style, new carbide teeth installed, good saw

204

42' Blade for Topsaw
42", P style, 2" arbor, new carbide teeth installed

205

Hanchett 408 L.H. Bandsaw Grinder
SN: 75, wheel size 10 x 5/8 x 5/8, band holding stands, some tools, extra wheels

206

Armstrong Roller and Bench
#2, SN: 13180, 6 1/2" x 36' x 1 3/4" anvil, tools, bottom rolls

207

Hanchett Air Swage
Model: 54/55

208

209

New Simonds Dominator Carbide Teeth
BF 8/9 9/32, 5 box 100 per box, plus part box

210

Simonds Stand-All Sawbits
BF 8/9 9/32, stand-all BT, 5 new boxes, 1 part, 1 box regular bits

211

Simonds Shanks
F 8 ga. Regular 3rd, 3 new boxes, 1 box 2nd, several part boxes

212

Marking Paint
33 cans green, 8 cans orange

213

Circular Saw Stand
Steel rack, 4 slots, saw working stand

214

Bolt Bin with Parts
34" x 48' x 12" deep, 2 tier bins, all controls

215

Air Nailers and Storage Cabinet
51' x 66" x 28" deep cabinet with 2 doors and shelves, Bostitch nailers, some staples, all parts in cabinet

216

Seat for Operators Cab
On pedestal, new seat

217

Bio Lube #2
2 new barrels, lube for bandsaw

217A

Pallet Jack

218

Sawmaster 32W Oil
1 part barrel, 1 empty barrel, 2 pumps

219

Poly Saw Guard
1 new part roll, lots of used

220

Misc. Lot
Towel dispenser, air hose, water hose, sprayer, chair, porter cable vacuum, 22" portable fan, broom, shovel

221

Torch Set with Tanks
Gauges and torches

222

1993 Atlas Copco Air Compressor
Model: GA45, SN: HOLO21037, Screw type compressor, duct work to outside, cut out box, no air lines, 60 hp electric motor

223

Electric Motor for Compressor
Fits lot 222, new motor 60 hp

224

Ingersoll Rand Air Compressor
Model: SSR-EP50SE, SN: G1017U92291, 198CFM, 50 hp electric motor, no air lines

224A

Vertical Air Tank
4' x 12', relief valve

224B

Air Lines
All air lines going to equipment not lotted with equipment, lots of 2 1/2' pipe

224C

Support Structure under Corley Mill
3/8" x 6" x 8' I beams plus braces, catwalk behind mill, no electrical or air lines

224D

Support Structure under Resaw and Runaround
Support structure and catwalk around resaw and runaround, no electrical or air lines, no control valves

224E

224F

Structural Steel
From break down line to trimsaw as marked, no air lines or electrical

224G

Electric Wires and Conduit in Building
Electric wires from main to cutout box to equipment, includes conduit but no boxes as marked, does not include 110 V pertaining to building

225

Ingersoll Rand Air Dryer
Pipe as marked

226

Ingersoll Rand Air Compressor
Model: SSR-EP25SE, SN: KE3147U96109, 95CFM, 25 hp electric motor, working condition

227

Van-Air Air Dryer
No air lines, Twin tank, electric controls

228

229

2 Strand Log Deck with Stop'N'Load
(Part of an entirety) Model: 4221D, SN: 28510500X115RS78, 6' x 13', 46" loading arms, hydraulic drive

230

3 Strand Transfer Deck
(Part of an entirety) 8' x 12' plus 4' drop section, electric drive

231

Morgan Board Edger
(Part of an entirety) 5" x 30" capacity, 26" x 44" infeed belt, 1 moving saw, 14' split saw blades, 26' x 44" outfeed belt, 30 hp electric motor, can be portable

232

Dust Conveyor
(Part of an entirety) 11" x 14'6", 6" pan, 8' sides, electric drive

233

Dust Conveyor
(Part of an entirety) 15" x 10', 9" pan, 7 1/2" paddles, 4" sides, chain type conveyor

233A

Dust Conveyor
18" x 24', 11" pan, with slide pan, electric drive

234

Bandsaw Blades
(Part of an entirety) 4" x 21' Double Cut bandsaw blades, 146 tooth, 11 pieces

235

3 Lumber Racks
(Part of an entirety) 8' x 4', 36" tall, board stop, slab rack 4' x 4', metal stand 4' x 20"

236

Banding Tools and Hand Tools
(Part of an entirety)Shovels, sledge hammer, axe, digging bar, banding tools, steel banding, dust rake, cant hook, bolt cutter

237

Delta 10" Power Miter Saw
(Part of an entirety)

238

Porter Cable Air Compressor
(Part of an entirety)150 max psi, 24 gallon tank

239

All Electrical to Mill
(Part of an entirety) Cutout boxes, motor starters

240

Entirety of Lots 228-239
With 10% raise

241

JD Turbo Power Unit
Model: 4045 TF275, SN: PE4045J004385, clutch, mount to be used on select bandsaw mill, in good condition

255A

Wheel Loader Forks
8 x 48" forks, 62" wide overall, quick attach

242

Corley 10 Head Drop Trimmer*
SN: DST-021, 9' x 24' overall, 7.5 hp electric motor on each head, 24" blades, air valves and cylinders. Contact Myron Nissley with any questions 574-536-2481

243

Cant Tipple with Frame*
16' long, 4' x 19' overall, air cylinder. Contact Myron Nissley with any questions 574-536-2481

256A

Wheel Loader Forks
8 x 48" forks, 62" wide overall, quick attach

244

244A

Yanmar Diesel Engine*
Model: 3TNM74F-SAWM, SN: 006189, includes fuel tank, was used on Wood-Mizer EG200 edger. Contact Myron Nissley with any questions 574-536-2481

257A

Wheel Loader Forks
6 x 52" forks, 62" wide overall, quick attach

245

Ingersoll-Rand T30 Air Compressor*
Model: 234OL5, SN: 30T923383, 5 hp electric motor, 60 gallon vertical air tank

246

2-Strand Log Deck with Stop'n'Load*
80" x 22', 3' loading arms, hydraulic cylinders onloading arm, electric drive. Contact Myron Nissley with any questions 574-536-2481

258A

Wheel Loader Forks
6 x 52" forks, 62" wide overall, quick attach

247

248

Belt Conveyor*
No drive, 6 1/2" belt, 8" pan, 4 1/2" sides, 12" x 28'

259A

Wheel Loader Forks
Quick attach, used on Volvo L60F, 6 x 54" forks, 50" wide

249

Self Dumping Hopper*
56 x 80 x 52" deep

249A

Self Dumping Hopper*
60 x 65 x 48" deep

260A

Volvo Loader Forks
SN: 26130003, Quick attach, 8 x 48" forks, 62' wide overall

249B

Self Dumping Hopper*
60 x 65 x 48" deep

249C

Self Dumping Hopper*
60 x 65 x 48" deep

250

252

Toyota Electric Tow Truck*
Model: 7TB50-69209E, battery powered, includes charger, 24V

253

Toyota Electric Tow Truck*
Model: 8TB50-36074, 710 lb. maximum couples weight, battery powered, 24 V, includes charger

254

Toyota Electric Tow Truck*
SN: MVE00147504, model: 85P-13, 24 V battery, includes charger

255

256

257

258

268

259

260

260A

261

264

264A

Case 455C Track Loader
SN: GBE0004375, meter reads: 3,718 hours, 14' tracks, Case diesel engine, 5 x 40" forks, 52" wide overall, pin through style forks, open cab. Runs and operates well

264B

Wheel Loader Bucket
Used on Volvo L50B, quick attach, 3' x 88"

264C

Wheel Loader Bucket*
Quick attach, 102" wide x 54" deep x 6' high

264D

Wheel Loader Bucket*
Quick attach, 4' x 104" x 5' tall

264E

Wheel Loader Bucket*
Quick attach, 38" x 8' x 42" tall

264F

Sawdust Bucket*
Quick attach, 4' x 8' x 4' tall

264G

Wheel Loader Forks*
Quick attach, 5 x 50" forks, 50" wide

264H

Jib Crane for Loader*
Fork pockets, 14' long, 9 x 38" plate on end, has tie-back chains

264I

Push Blade*
Quick attach, 18" x 10'

264J

Snow Blade*
Quick attach, 10' wide

265

266

267

267A

Excavator Bucket*
64" wide, 42" deep, single blade, 19" center to center on pins

302

Great Dane Flatbed Trailer
VIN: 1GRDM96204M702293, GVWR: 80000 lb., 295/75R22.5 tires, steel rims, 102" x 48'. Includes sliding straps, spare tire, and storage for cribbage blocks. Road ready

267B

Quest Excavator Bucket*
2' wide x 40" deep, 5 teeth, 19" center to center of pins

270

271

272

273

274

275

276

280

281

282

283

284

285

286

287

288

292

293

294

295

296

297

298

298A

Log Bed for Truck*
98" x 17' long, bunks are 7' wide x 80" tall

299

299A

300

2004 Great Dane Flatbed Trailer
VIN: 1GRDM96284M702199, 8' x 48', 295/75R22.5 tires, includes sliding straps and box for cribbage blocks

301

2004 Great Dane Flatbed Trailer
VIN: 1GRDM96264M702315, 8' x 48', 295/75R22.5 tires, sliding straps, cribbage block box

302

2001 Transcraft Flatbed Trailer*
VIN: 1TTF4820X12007610, 8' x 48', 4' tall guard on front, includes all sliding straps, 285/75R24.5 tires, toolbox under deck

303

2005 Fontaine Flatbed Trailer with Log Bunks*
88" x 55" tall bunks, 6 bunks, includes sliding straps, spare tire, 295/75R22.5 tires, under deck box for cribbage blocks

303A

1998 Fruehauf Flatbed Trailer*
VIN: 1JJF482F7WS487538, GVWR: 100000 lb, 101" x 48', 295/75R22.5 tires, includes sliding straps, toolboxes under deck

303B

2004 Great Dane Flatbed Trailer*
VIN: 1GRDM96264M702282, GVWR: approx. 80000 lb, 101" x 48', 295/75R22.5 tires, includes all sliding straps, spare tire, box for cribbage blocks under deck

303C

2004 Great Dane Flatbed Trailer*
VIN: 1GRDM96204M702293, GVWR: approx. 80000 lb, 101" x 48', 295/75R22.5 tires, includes sliding straps, spare tire, storage box for cribbage blocks under deck

303D

303E

2004 Great Dane Flatbed Trailer*
VIN: 1GRDM96205M701064, GVWR: 71000 lb, 101" x 48', 295/75R22.5 tires, includes sliding straps and storage for cribbage blocks under deck

303F

1992 Oshkosh Flatbed Trailer*
VIN: 4MLP24828NB615001, GVWR: 80000 lb., 101" x 48', 295/75R22.5 tires, includes sliding straps, spare tires, storage for cribbage blocks under deck

303G

2006 Fontaine Drop-Deck Trailer*
VIN: 13N25330863538309, 101" X 10' top deck, 43' main deck, 53' long overall, 255/70R22.5 tires, sliding straps, toolbox and cribbage block storage under deck

303H

2009 Fontaine Drop-Deck Trailer*
VIN: 13N24820391549994, 101" X 48', 10' top deck, 38' main deck, 48' overall, GVWR: 69278 lbs., 255/70R22.5 tires

304

1987 Fontaine Lo-Boy Trailer*
SN: 9916, 9'7" x 23'6" main deck, 30" x 9' ramps, 35' long overall, 245/70R17.5 tires

305

2005 Peerless Open Top Chip Trailer
VIN: 1PLE045275PK54209, 45' long, 11R22.5 tires, 92" inside width, 98" inside height

306

2006 Peerless Open Top Chip Trailer
VIN: 1PLE045215PG54871, 45' long, GVWR: 65,000 lb., 275/80R22.5 tires, 92" inside width, 98" inside height, has a spare tire

307

2012 Peerless Open Top Chip Trailer
VIN: 1PLEO4525CPF57427, 45' long, GVWR: 65,000 lb., 295/75R22.5 tires, 92" inside width, 98" inside height, has spare tire

308

2005 Peerless Open Top Chip Trailer
VIN: 1PLE045225PE54467, 45' long, 275/80R22.5 tires, 92" inside width, 98" inside height, GVWR: 65,000 lb., has spare tire

309

2009 Peerless Open Top Chip
VIN: 1PLEO45239PF56284, 45' long, GVWR: 65,000 lb, 11R22.5 tires, 92" inside width, 98" inside height, has spare tire

310

2005 Peerless Open Top Chip Trailer
VIN: 1PLE045255PK54208, 45' long, GVWR: 65,000 lb., 275/80R22.5 tires, 90" inside width, 98" inside height, has spare tire

311

2012 Peerless Open Top Chip Trailer
VIN: 1PLEO4523CPF57426, 45' long, GVWR: 65,000 lb., 275/80R22.5 tires, 92" inside width, 98" inside height, has spare tire

312

1990 Fruehauf Van Trailer*
VIN: 1H5V05320LM044569, GVWR: 68000 lb., 53' long, 295/75R22.5 tires, 99" inside width, 110" inside height

313

2005 Peerless Open Top Chip Trailer*
VIN: 1PLE045245PE54468, GVWR: 65000 lb., 45' long, 275/80R22.5 tires, 91" inside width, 98" inside height

314

1997 Trailmobile Van Trailer*
VIN: 1PTOIJAH7V6003294, GVWR: 65000 lb., 53' long, 11R22.5 tires, 99" inside width, 110" inside height

315

1997 Trailmobile Van Trailer*
VIN: 1PTOIJAH7V6003330, GVWR: 65000 lb., 53' long, 295/75R22.5 tires, 99" inside width, 110" inside height

316

1974 Fruehauf Van Trailer*
VIN: CHS193313, 48' long, 295/75R22.5 tires

317

1969 Fruehauf Van Trailer*
VIN: MAK202601, 40' long, 11R22.5 tires, 92" inside width, 98" inside height, includes tires and rims in trailer

318

318A

1988 Fruehauf Van Trailer*
VIN: 1H2V05320JE003976, GVWR: 68000 lb., 53' long, 295/75R22.5 tires, 100" inside width, 109" inside height

319

2000 Hyundai Van Trailer*
VIN: 3H3V532C4YT092019, GVWR: 65000 lb, 53' long, has spare tire, 295/75R22.5 tires, 99" inside width, 110" inside height

319A

2000 Hyundai Van Trailer*
VIN: 3H3V532C6YT091003, GVWR: 65000 lb., 53' long, 275/80R22.5 tires, 99" inside width, 110" inside height

319B

320

Log "Pup" Trailer
25' long, 90" wide x 60" tall bunks, pintle hitch, air brakes, 255/70R22.5 tires. Photo available online

321

Log "Pup" Trailer
93" x 60" tall bunks, 25' long, 102" x 54" dovetail, pintle hitch wit air brakes, 255/70R22.5 tires. Photo available online

322

1988 Trailmobile Log Trailer*
VIN: 1PTF71TJ2J9002832, GVWR: 65000 lb. GAWR: 20000 lb., 6 bunk, 40' long, includes all straps, 275/80R22.5 tires, bunks are 91" x 5' tall

329

330

331

332

333

334

338

2009 Toyota Tacoma*
VIN: 5TENX22N89Z639570, GVWR: 4650 lb., meter reads: 273299 miles, single cab, short bed, 2WD, auto transmission, 2.7L 4 cylinder engine. Good running pickup

340

Cosmo Flail Mower*
Model: FL 145, SN: 18048079, made in 2018, 60" wide, pto and 3 point hitch

341

Shaktiman Roto-Tiller*
Model: UM72, SN: AGBI101113039, made in 2018, 6' wide, pto hookup

342

Shaktiman Roto-Tiller*
Model: UM72, SN: AGBI101113038, made in 2018, 5' wide, pto hookup

343

Frontier Hay Mower*
SN tag missing, pto hookup and 3 point hitch, hydraulic cylinder for control, 8'6" cutting head width

344

Ideal Pull Behind Post Pounder*
Kohler 14 hp gas motor, hydraulic controls and cylinders, ST225/75R15 tires, pin through hitch, has rack for holding posts, good condition

345

Ideal Post Pounder Attachment*
Standard skid steer quick attach and hydraulic controls, 10 x 21 x 12" hydraulic tank. In good condition

346

Ideal Post Pounder Attachment*
Standard skid steer quick attach and hydraulic controls, 10 x 21 x 12" hydraulic tank. In good condition

347

90" Snow Pushing Box Blade*
Standard skid steer quick attach, made with 1/4" steel

348

90" Snow Pushing Box Blade*
Standard skid steer quick attach, made with 1/4" steel

350

Electric Motors
(4) 25-30 hp, 286T frame, 1470-1780 rpm

351

Howard Electrical Transformer
120/240 V, 240/480 V

352

Electric Motors
(1) 75 hp, 1780 rpm, 365T frame, 230/460V, (1) 20 hp, 256T frame, 3510 rpm at 230/460 V

353

Electric Motors
8 total, 1-20 hp, bearings included

354

Electric Motors
(1) 25 hp, 1180 rpm, 324T frame, (1) 7.5 hp, 213T frame, 1760 rpm, 460 V

355

Electric Motors
9 total, 1.5-5 hp

356

Electric Motor
40 hp, 324T frame, 230/460V

357

Electric Motors
7 total, (2) 5 hp 184T frame, (5) no tags-approx. 5 hp

417

Shop Press
Self contained hydraulic unit, assorted blocking

358

Electric Motors
(2) 25 hp, 284T frame, 460 V

359

New Electric Motor
5 hp, 182/4T frame, 1730 rpm, 230 V

360

Square D 3 PH Transformer
75 KVA

361

Lincoln Electric Motor
150 hp, 444T frame, 460 V, 1780 rpm

362

Lincoln Electric Motor
100 hp, 1780 rpm, 460 V, 405T frame

363

Pallet of Motor Frames

364

Electric Motors
(1) no tag-approx. 30 hp, (1) 1 hp, 143TC frame, 1725 rpm, 460 V

365

Electric Motors
(1) 60 hp, 1780 rpm, 460 V, 364T frame, (1) 30 hp, 1760 rpm, 286T frame, 460 V

366

Electric Motors
(1) 50 hp, 1780 rpm, 326T frame, (1) 30 hp, 1760 rpm, 285T frame, (1) 40 hp, 460 V, 1780 rpm, 324T frame

367

Electric Motors and Gearboxes
(1) 3 hp with gearbox, (1) 5 hp with 6:1 gearbox, (1) 5 hp, 1740 rpm, RX184T frame

368

Electrical Parts
3 crates of switches and breakers

369

Banding Cart
Partial roll of 3/4" steel banding on cart, includes 3/4 box of clips and full roll of 3/4" banding

370

Pallet of Pulleys, Sprockets and Bushings

371

pallet of Electric Motors and Gearboxes
1-5 hp, 4 motors

434

Flat Conveyor Belt
3/8' x 30' length unknown

372

Pallet of Gearboxes

373

Pallet of Air Parts
Air hoses, fittings, filters, compressor parts

374

Pallet of Paint Materials
Spray paint, paint cans, rollers, tray

375

Pallet of Misc. Parts
Conduit fittings, cylinders, hydraulic pump, oil pump, electrical components

376

Pallet of Hydraulics
Pumps, hoses, fittings, valves

377

Banding Tools
3 crimpers, 2 strapping tools

378

Pallet of Electricals
Lights, pedal controls, wiring, breakers, fuses, switches

379

Pallet of Assorted Bearings

379A

Husk Wrenches
1 wrench, 2 tooth setters, 1 crowbar

380

10 Cubic Yard Wheelbarrow

381

Wheelbarrow
30 x 36' x 2 wheeled

382

Pallet of Husqvarna Chainsaw Parts
Oil pump, router table

383

Pallet of Misc. Parts
Motor and gearbox mounting plates, 7.5 hp motor, rollers

384

Crate of Belts
Lots of new belts, for misc. equipment in sawmill

385

Pallet of Belts
Lots of new belts, for misc. equipment in sawmill

386

Trash Pump
3" Yamaha pump powered by 300 cc Yamaha motor, includes hose and fittings, small 110 V sump pump

387

Pallet of Castors
2 rolls of H78 chain, wheels, 2 hydraulic pumps

388

3 Chip-Chute Adapters
Fit precision chipper

389

Electric Motor
150 hp, 460 V, 1780 rpm, 445T frame

390

Electric Motor
50 hp, 230/460 V, 1780 rpm, 326T frame

391

Electric Motor
No tag on motor, estimate 50-100 hp

392

Pallet of Ladder Back Chain
12" chain and rollers for log trough

393

Head for Morbark Debarker
Main cutting head, includes covers

394

3 Drum Debarker Heads
For Morbark debarker, all 16 x 20"

395

New Conveyor Belt
Cleated, 30" wide, length unknown

396

New Conveyor Belt
Cleated, 36' wide, length unknown

397

Conveyor Belts
(1) 48", (1) 36" cleated, lengths unknown

398

Conveyor Belts
4-29" widths, lengths unknown

399

Conveyor Belts
(4) 30" wide, (1) 28" wide, lengths unknown, like new condition

400

Conveyor Belts
(1) 60", (1) 30", (1) 16" cleated, lengths unknown

401

Hand Tools
2 Shovels, 2 brooms, scraper, cant hook

402

Hand Tools
2 Shovels, 2 brooms, scraper, cant hook

403

Hand Tools
2 Shovels, 2 brooms, scraper, cant hook

404

Hand Tools
Shovels, brooms, cant hook, 6' step, 300 lb. capacity ladder

404A

Bucksaw Rack
5' x 10', good condition

404B

3/4" steel Banding
12 full rolls of new banding

404C

Stacking Rack
16 x 60 x 54" tall

405

Wheelbarrow
Single wheel

406

Wheelbarrow
2 wheeled

407

Barn Sweep Paddles and Chain
18" paddles

408

Poly Deck Strips and Metal Bracing
(8) 32" long braces, 1/2-3/4" thick poly

409

Rack with Angle Iron

410

Rack with Flat Steel

411

Rack with Scrap Shafts
30 x 30 x 42" rack

412

Crate of Roller Chain

413

Pallet of H78B Chain

414

Pallet of Chain
15 rolls of H78, 2 rolls of regular chain

414A

Fuel Tank on Stand
38' x 5' long, on stand bolted to skid, 43 x 68 x 70" tall overall

414B

JET Metal-Cutting Bandsaw*
110 plug-in, on castors

414C

Lemas Metal Bender*
Model: LH-3RS, SN: 329025, made in 2007, capacity 75 x 75 x 9.0, electric drive, portable control stand, electric box, hydraulic cylinder

414D

Portacool Fan*
110 Plug in, water hookups, has water pump, 40 x 75 x 85" tall, 48" fan, 2 speed

414E

415

Pallet of Paddle Chain
34" wooden paddles

416

Pallet of Chain
Roller chain, H78B, chain with pegs

418A

5 HP Hydraulic Pack*
32 x 16 x 16" tank, cooling unit, valves, electric box

418B

Rousselle 6F Press*
SN: 16960, Tonnage 60, 3 stroke, 12 1/2" shut height, 75-150 strokes/min electric drive, 460V cutout box

418C

Steel Break*
Electric drive, 6' wide

418D

Willis-Bergo Radial Arm Drill Press*
4 prong plug in, 30 x 78 x 80" tall, 6 speed, good condition

419

New Shaft Stock
(1) 2 1/8" x 10', (1) 1 15/16" x 4', (1) 2 15/16' x 12', 2 short pieces

420

Barrel Dolly Motor Oil
15 gallon Morlina oil SD220, Barrel dolly

421

Tivar, Sawhorses, and Steel Wear Plate
(1) 1/2" x 4' x 8', (1) 1/2" x 3' x 8', (1) 3/4" x 32" x 8', (1) 3/4" x 7" x 8', 13' steel wear plate, 4' sawhorses

422

Cant Hook and Air Hose
3 air hoses, 48" cant hook

423

Brooms, Shovels, and Scraper
5 brooms, 9 shovels, 1 scraper

424

Louisville Step Ladder
Fiberglass 8' ladder

425

Shop Hoist 1/2 Ton
SM-01, 110 V

426

Rack wit Shaft Stock
Several pieces, 1 15/16" x 12', assorted shaft pieces

427

Board Stops
For deck on resaw runaround

428

Parts Lot
New seat for cab, V belts, 1/2" air hose

429

Steel Crate with Parts
7" flat 3 piece length unknown, gearbox, air cylinder, bolts

430

Wire Create with Parts
Flat belt, assorted parts

431

Shell Hydraulic Oil
S2MX46, 1 new barrel, 2 barrels with pumps-feel full, spill box

432

New Barrels
(1) barrel Shell Rotella TI SAE 10W motor oil, (1) barrel Shell Tellus S2 MX 46 hydraulic oil, (1) barrel Anchor seal 2 summer formula

433

Wire Create
V belts, 40' x 40" crate, 1/2" x 52" x 35"

435

Barrel Lift
Slips on forks

436

Cabinet with Parts
6' x 72' x 26", assorted new sprockets

437

Extension Cord
4 wire cord with plugs

438

Guard Fence
70" high, 2-54" section with door, (1) 10', (1) 54'

439

Hoist A-Frame
116' inside, adjustable height 7' to 11'

440

Cox Reels, Air Hose Reel, and Cord Reel
Retracting reel, includes hose, extension cord on reel

441

Barrel Hydraulic Oil with Pump
Spill tray, hand pump, full barrel, shell S2MX32

442

Floor Stand Fan
18" electric drive

443

Storage Box
48' x 24' x 24', steel box, all contents

444

Corley Parts for Carriage and Husk
Dogs for carriage, bearings for carriage, cant kicker cylinders, computer control board, saw guides, Joystick handle, air valves

445

Corley Resaw Parts
New shaft and bearings for top wheel, air cylinders, air valves, new cylinder and control valve for line bar feed, hydraulic motors, assorted filters and parts

446

Edger Parts Log Turner Cylinder
Sliding bearings for edger, new shaft for edger, cylinders for bar turner, encoders, saw guide blocks

447

Morbark Debarker Parts
Hydraulic cylinders, motors, valves, relief valves, filters, drum spikes, lots of new parts

448

Slab Dump Parts
(2) air cylinder, 8" bore 12" stroke, new 3/8" x 30" belt for slab dump, seal kit, (1) 24" belt no lacing

449

Precision Chipper Parts
(3) new bearings, new knife holders, counter knives, knife clamps, anvils, paddles, bolts, swivel rod ends, anvil plate, probably enough parts to redo 3 chippers

450

Flexco Belt Lacing Tool and Parts
Toolbox with tools and parts, lots of lacing supplies

451

Electric Motors and Gearbox
2 motors special order for edger, browning 1.5 p with gearbox, Nema 5 hp motor

543

Hydraulic Pumps and Gearbox
New Quantis gearbox used on resaw, new Vickers pump for debarker, Vickers pump PUB45A RSF 10 CAII-387539, tension bars

544

Laser Lights, Volvo Parts, and Tempasonic Rod
4 new Laser Blazer lights, 2 used lights, Volvo pins, light, door latches, 1 new Tempasonic rod

545

Heaters, Lamps, Chipper Blade Grinder
9 electric heaters, heat lamps, DeWalt chipper blade grinder with discs

546

Hose Supplies and Hand Tools
DeWalt saws, 1/2" Milwaukee impact, assorted hoses

547

Webster Vibrating Conveyor Drive and Parts
New drive for Webster conveyor, bushings for Precision conveyor, 30" planer knives, new bearing Dodge FC-S2-215RE 2 15/16'

567

Miller Welder
Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads

548

Cylinders and Parts
New air cylinder for cant pusher 6" bore 40" stroke, cylinder for carriage

568

Miller Welder
Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads

549

Schneider Starter and Parts
Schneider soft start used on Corley resaw, wiring for resaw, Toggle switches,, grease guns, panel for Trimmer control, air foot valve

550

Hubs and Sprockets Bearings
Lots of new Sprockets, Timken bearings

570

Miller Welder
Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads

594

Loader Tires
Michelin, XHA2, 3 new tires, 20.5/R25 tires, 1 used may need patched

551

Split Sprockets and Hubs
Lots of new hubs and sprockets

571

Miller Welder
Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads

552

Tsubaki Roller Chain and End Evener Web Parts
(2) 100D Tsubaki chain (extra hard), steel web for end evener, plus sprockets, Morbark debarker shield

553

Domestic Brisk II AC Unit
New rooftop air conditioner unit, 3 7/16" x 38" debarker shaft

573

Miller Welder
Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads

554

Morbark Debarker Head and Cart
Debarker head 32" shaft, 48" x 24" cart on wheels, fall restraint harness

555

Shop Cart on Wheels
40" x 18", all contents

556

Parker Carriage Drive Pump
Connector bushing, fan pulley

557

Parker Hydraulic Motor Carriage Drive
New motor for carriage drive, LB 31878

558

Oil and Air Filters
Assorted filters on skid

559

Roller Chain
Lots of new roller chain, assorted sizes

560

Tire Changer Cordless Grease Guns
Lots of hand tools, DeWalt grease gun, Milwaukee grease gun, portable air over hydraulic tire changer

561

Buck Saw
6', extra blade and chains

562

2 Mandrel Shaft
2 15/16" x 11' with 8" collar, same on Corley mill, 2 7/16" x 11' with 8" collar, new shafts

562A

Information Lot
The following welders were taken out of production at Tarter Gate and were functioning properly when removed from production.

563

Miller Welder
Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads

564

Miller Welder
Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads

565

Miller Welder
Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads

566

Miller Welder
Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads

569

Miller Welder
Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads

572

Miller Welder
Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads

574

Miller Welder
Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads

575

Miller Welder
Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads

576

Miller Welder
Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads

577

Miller Welder
Model: CP-302, SN: MC280244V, 300 amp output, 3 ph electric, wire feed unit 70 series, no welding leads

578

Miller Welder
Model: CP-302, SN: MC280244V, 5 pieces, 300 amp output, 3 ph electric, no wire feed unit

579

Miller Welder
Model: CP-302, SN: MC280244V, 5 pieces, 300 amp output, 3 ph electric, no wire feed unit

580

Miller Welder
Model: CP-302, SN: MC280244V, 2 pieces, 300 amp output, 3 ph electric, no wire feed unit

581

Miller Wire Feed Units
60 series, (1) 75 series, most units tested ok

582

Tweco Mig Welding Gun
2 Welding guns, torch hose, shield

583

Miller Welder
Model: CP-302, 300 amp output, 3 ph electric, 60 series wire feeder, 588-70 series, 590-70 series

584

Miller Welder
Model: CP-302, 300 amp output, 3 ph electric, 60 series wire feeder, 588-70 series, 590-70 series

585

Miller Welder
Model: CP-302, 300 amp output, 3 ph electric, 60 series wire feeder, 588-70 series, 590-70 series

586

Miller Welder
Model: CP-302, 300 amp output, 3 ph electric, 60 series wire feeder, 588-70 series, 590-70 series

587

Miller Welder
Model: CP-302, 300 amp output, 3 ph electric, 60 series wire feeder, 588-70 series, 590-70 series

588

Miller Welder
Model: CP-302, 300 amp output, 3 ph electric, 60 series wire feeder, 588-70 series, 590-70 series

589

Miller Welder
Model: CP-302, 300 amp output, 3 ph electric, 60 series wire feeder, 588-70 series, 590-70 series

590

Miller Welder
Model: CP-302, 300 amp output, 3 ph electric, 60 series wire feeder, 588-70 series, 590-70 series

591

5 Miller Welder
Model: CP-302, 300 amp output, 3 ph electric, no welding leads, no feed unit

592

Miller Welder
Model: CP-302, 300 amp output, 3 ph electric, no welding leads, no wire feed unit

592A

Miller Welder*
Model: CP-302, no SN tag, 4 prong plug,

592B

Miller Welder*
Model: CP-302, SN: LC456392, Miller 60 series, wire feeder, 4 prong plug

592C

Miller Welder*
Model: CP-302, SN: LG280145C, 200/230/460V, 4 prong plug

592D

Miller Welder*
Model: CP-302, SN tag is missing, 200/230/460V, 4 prong plug, Miller 70 series 24 V wire feeder

592E

Miller Welder*
Model: CP-302, SN: KK303259, 200/230/460V, 4 prong plug, Miller 70 series 24 V wire feeder

592F

Miller Welder*
Model: CP-302, SN: LB089213, 200/230/460 V, 4 prong plug, Miller 70 series 24 V wire feeder

592G

Miller Welder*
Model: CP-302, SN: ME130125V, 200/230/460V, 4 prong plug, Miller S60 24V constant wire feeder

592H

Miller Welder*
Model: CP-302, SN: LF430122C, 200/230/460V, 4 prong plug

592I

Miller Welder*
Model: CP-302, SN: ME130417V, 200/230/460V, 4 prong plug

592J

Pallet of Brand New Gates Hydraulic Hoses*
1/2" hoses with fittings

592K

Steel Pins*
(160) 1 1/4 x 5", (111) 1 1/4" x 7"

592L

Bolts and Fittings*
(1,000) 1/4" hydraulic fittings for skid steer attachments, (200) 1 1/4" x 9 1/2" bolts with 1 7/8" head

593

Pallet of New Attachment Parts*
Spindles, nuts, and studs for skid steer attachments

593A

Pallet of New Hydraulic Cylinders*
(Approx. 60) 24", for skid steer attachments,

593B

Pallet of New Attachment Parts*
Spindles and nuts for skid steer attachments

593C

New Hydraulic Valve Stations*
15 pieces

593D

New Hydraulic Cylinders*
(70) 24", for skid steer attachments

593E

Plate Steel*
(420) 3/8" x 12" x 12"

593F

Plate Steel*
(168) 3/8 x 12 x 12"

593G

Plate Steel*
(280) 12 1/2 x 49"-14 gauge

593H

Plate Steel*
(140) 12 1/2 x 49"-14 gauge

593I

Plate Steel*
(267) 12 1/2 x 49"-14 gauge

593J

Plate Steel*
(Approx. 140) 12 1/2 x 49" - 14 gauge

593K

Plate Steel*
(Approx. 250) 12 1/2 x 49"-14 gauge

593L

Plate Steel*
(Approx. 400) 12 1/2" x 49"-14 gauge

593M

Plate Steel*
(300) 12 1/2 x 49"-14 gauge

593N

Plate Steel*
(400) 12 1/2 x 49"-14 gauge

593O

Plate Steel*
(400) 12 1/2 x 49"-14 gauge

593P

Plate Steel*
(400) 12 1/2 x 49"-14 gauge

595

Wire Crate with Belts
Lots of new v-belts, assorted sizes, 48' x 48" x 30" crate

596

Ingersoll Rand Air Compressor
Model: SSR-EPE50, 208 CFM, 50 hp electric, hours unknown, was running when taken out of service

597

Ingersoll Rand Air Compressor
Model: SSR-EP15U, 55 CFM, 15 hp electric motor, was running when removed from service

598

Amerex Fire Extinguisher
Portable unit with pintle hitch. Last tested 6/21

598A

Pallet of Misc.*
(1) 5 hp motor, (1) 1/2 hp motor, gearbox, chain, motor stand, pipe clamp

599

ZEKS-Therm Air Dryer
Model: 400 H SBA 400

600

Steel Flat Stock
1/2" x 4' x 8', one corner cut out

601

Steel Flat Stock
1/4" x 4' x 8', 1 full sheet, 1 part piece

602

Stake Pointer
2 heads, 5 hp electric

603

Air Tank
Vertical tank, 3' x 7'

604

New Loader Forks
6" x 44", round hole mount loader forks, 2" hole

604A

Vibrating Conveyor*
18" pan, 9" flared sides, 2 sections, includes chipper infeed section, 31" x 33'6" total, no drive

604B

2 Yard Self Dumping Hopper*
Has fork pockets, 5500 lb. capacity

604C

Cantilever Rack*
In 2 pieces, 68" x 12'8" tall

604D

Cantilever Rack*
In 2 pieces, 68" x 12'8" tall

604E

Loader Forks*
6 x 48" forks, 20" slot spacing

604F

Jib Crane Attachment*
10' long, 5 1/2" fork pockets-19" apart

604G

Lumber Carts*
(1) 44 x 74", (1) 29 x 74"

604H

Fuel Tank for Truck*
2' x 5'

604I

Rack with C-Channel Steel*
26 x 30" rack, 3" wide, 54"-9' long, 1/8" thick

604J

Pallet of Misc. Steel*

604K

2 Barrels of Tire Chains*
For 11R22.5 tires

604L

Pallet of Tire Chains*
For 11R22.5 tires

604M

Fuel Transfer Tank with Pump*
28 x 48 x 16", GPI 15 psi, 12V pump, 60 gallon capacity

604N

Transfer Tank and Toolbox*
32 x 50 x 20" tall, 74 gallon capactiy, 12V 15 gpm pump, 16 x 48 x 9" deep toolbox section

604O

Lumber Cart*
40 x 60 x 42" tall

604P

Tube Steel*
4 x 7 x 128"

604Q

Tube Steel*
4" x 4" x 15'10"

605

4 Strand Log Deck
11' x 18', 12'1" overall width, electric drive

606

Material Rack*
Has fork pockets, 55" x 78" x 8' tall

607

Material Rack*
28" x 8' x 50" tall

608

Lumber Cart*
44 x 60"

609

Hydraulic Press*
13 x 34 x 16" tank, electric drive

610

25 HP Hydraulic Pack*
25 x 37 x 18" tank, electric box

611

Catwalk Steps*
New condition. 36 x 70 x 80" tall

612

Material Rack*
Has fork pockets, 64 x 72 x 90" tall

613

Overhead Hoist Frame*
5' x 10'4" x 8' tall

614

Log Deck Strands*
6 strands total, 8' long, fits up to 3 3/4" wide chain

615

Forks*
5 x 48" forks, 16" slot spacing

616

Forks*
5 x 52" forks, 16" slot spacing

617

Material Rack*
44 x 52 x 38" tall

618

Steel Table*
55 x 60 x 38" tall

619

Hydraulic Pack*
Electric motor, hp unknown, 25 x 42 x 25" tank

619A

Twin City Fan and Blower Unit*
SN: 0015029411, size: 402, type: AFPL, 15 hp electric motor, 2 3/16" shaft, 55 x 55" frame, 5" x 100" pipe

620

Froedge Roll Case*
Model: 40315, made in 2000, electric drive, 6 1/2 x 36" rolls, 18" spacing, 4' x 13' overall

621

Froedge 4 Strand Transfer Deck*
H78B turtletop chain, hydraulic drive, 5' x 15'6", side rolls

622

3 Strand Transfer Deck*
9' x 14', no drive, H78 chain

623

Chipper Chute and Pipe*
Steel 12" elbow chipper chute, 20" x 17'6" steel pipe section

624

4 Strand Transfer Deck*
No chain or drive, 9'6" x 11'6", disassmebled, fits 3 1/2" chain

625

Hydraulic Press*
Hydraulic cylinder, 12" x 12' x 3' tall up to 2 1/2" pipe

626

Pipe Bender*
3' x 24' frame, up to 1 3/4" pipe, (2) bending heads with hydraulic cylinders and valves, electric control box

627

Diesel Fuel Tank and Spill Containment Box*
4' x 11' tank with electric pump, 5' x 12'6" box

628

Rubber Floor Mats*
4' x 6' x 3/4" thick, 7 pieces

628A

HS 1/4 Ton Overhead Hoist*
Does not include a chain hoist, 11' long cross beam, 13' tall post (in 2 pieces)

628B

Incline Belt Conveyor*
No motor, has 480V cord, 56" belt, 6' x 12' x 112" tall, mounted on castors, has steel welded across top to make height capacity 1 1/2"

628C

Steel Tube*
20" x 17' long, 22 x 29" cover on 1 end

628D

Cantilever Rack*
(2) 68" x 10' tall

628E

Steel I-Beam*
6" x 18" x 50' long, has 9" wide C-channel on 1 side

628F

Ventilation Pipe*
Approx. 100' of 36" pipe, 2 elbows, 2 adapters, 1 vent, will include all flanges.

629

Material Rack*
Has fork pockets, 4 x 10 x 4' tall

630

Material Rack*
Has fork pockets, 7' x 8' x 52" tall

631

Pallet Racking*
(18) 16' long "L" brackets, includes all supports and crossbraces

632

Jib Crane*
5" fork pockets-30" apart, 3' x up to 10' wide

633

Jib Crane*
5" fork pockets-30" apart, 3' x up to 10' wide

634

Material Cart*
2 tier, 6' x 6' x 52" tall

635

Material Cart*
2 tier, 6' x 6' x 52" tall

636

Material Cart*
2 tier, 6' x 6' x 52" tall

637

Material Cart*
2 tier, 6' x 6' x 52" tall

638

Steel Table*
45 x 60 x 28" tall

639

Loader Forks*
6 x 42" forks, 3' tall

640

Steel Shelf*
3' x 12' x 68" tall

641

Material Cart*
2 tier, 6' x 6' x 52" tall

642

Material Cart*
7' x 8' x 80" tall

643

Steel Landing Table*
100" x 122" x 18" tall

644

Steel Landing Table*
100" x 122" x 18" tall

645

Steel Rack and Blow Pipe*
4' x 6' rack, steel pipe, (1) 12" x 6' pipe, (1) 12" x 16' pipe

646

Skate Rolls*
54" x 10' x 18" tall, 2 1/2" x 50" rolls, 3" spacing

647

Skate Rolls*
54" x 10' x 18" tall, 2 1/2" x 50" rolls, 3" spacing

648

Skate Rolls*
54" x 10' x 18" tall, 2 1/2" x 50" rolls, 3" spacing

649

Rack with Angle Iron*
44 x 44" rack, 2 1/2-3" angle iron, 6" table steel

650

Steel Storage Bins*
(4) 44 x 54 x 38" deep

651

Steel Storage Bins*
(4) 44 x 54 x 38" deep

652

Steel Storage Bins*
(4) 44 x 54 x 38" deep

653

Steel Storage Bins*
(4) 44 x 54 x 38" deep

654

Steel Storage Bins*
(4) 44 x 54 x 38" deep

655

Steel Storage Bins*
(4) 44 x 54 x 38" deep

656

Steel Storage Bins*
(4) 44 x 54 x 38" deep

657

Steel Storage Bins*
(6) 44 x 54 x 38" deep

658

Steel Storage Bins*
(4) 44 x 54 x 38" deep

Sawmill Equipment Liquidation & Rolling Stock - Dunnville, KYListing ID#: 615516

Free Email Notifications

Share This Listing

Other Sales byThis Company

Sponsored Links

Sawmill Equipment Liquidation & Rolling Stock - Dunnville, KY

Login

Sign Up

Sign Up

Login

Sawmill Equipment Liquidation & Rolling Stock - Dunnville, KY
Listing ID#: 615516

Other Sales by
This Company