HVAC Testing, Adjusting and Balancing Equipment Auction
Listing ID#: 544043

Sale Location

Hillsborough, NJ 08844
Sale Dates and TimesSALE IS COMPLETED
Bidding Starts: Monday Nov 7
Bidding Ends: Thursday Nov 10
Sale Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
AuctionAdvisors

Phone: 973-753-1313
Email: sberlin@auctionadvisors.com
Website: www.auctionadvisors.com

EstateSale.com ID#: 11498
View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Auction Terms & Conditions of Bidder Participation

Thank you for your interest in this Online Auction.

These are the Terms and Conditions on which all property is offered for sale, subject to amendments and modifications announced by Auction Advisors ("Auctioneer") at the time of the auction and posted on the website.

By bidding in this auction, prospective bidders agree to be bound by and comply with the following Terms & Conditions and acknowledge and agree that they are being allowed to participate at this auction in reliance on such agreement.

1. REGISTRATION. Bidders must be registered with: www.auctionadvisors.hibid.com and approved for bidding by Auctioneer. By registering you represent and warrant that any and all Buyer information is correct. Auctioneer reserves the right to deny any registered bidder at any time at its sole discretion without notification.

2. INSPECTIONS: Bidders may by appointment only inspect the offering on November 9th. Bidders may schedule a private in-person or virtual inspection by contacting Joe at jcamilleri@auctionadvisors.com or text/call 908 329-7877.

3. AS-IS WHERE-IS SALE. ALL SALES ARE FINAL, ON AN "AS IS WHERE IS", "IN PLACE" "WITH ALL FAULTS" BASIS WITH NO CONDITIONS OR WARRANTIES WHETHER EXPRESSED, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING WITHOUT LIMITATION, WARRANTIES OR CONDITIONS AS TO TITLE, DESCRIPTION, FITNESS FOR PURPOSE, QUANTITY, QUALITY, MERCHANTABILITY, STATE, CONDITION, LOCATION OR OTHERWISE. NO SALE SHALL BE INVALIDATED AND THE AUCTIONEER SHALL HAVE NO LIABILITY FOR A MISDESCRIPTION OF ANY ARTICLE OR LOT WHETHER CONTAINED IN A CATALOGUE, ADVERTISEMENT, ORAL ANNOUNCEMENT OR OTHERWISE.

4. DESCRIPTIONS. THE AUCTION CATALOGUE IS MERELY A GUIDE. DESCRIPTIONS HAVE BEEN PREPARED IN GOOD FAITH FOR GUIDE PURPOSES ONLY AND SHALL NOT BE RELIED UPON BY THE PURCHASER FOR ACCURACY, GENUINENESS, AUTHENTICITY OR COMPLETENESS. PLEASE INSPECT ALL ITEMS BEFORE BIDDING. PURCHASERS SHALL BE DEEMED TO HAVE RELIED ENTIRELY UPON THEIR OWN INSPECTIONS AND INVESTIGATIONS. IN ADDITION, AUCTIONEER RESERVES THE RIGHT TO ADD, ALTER, OR REMOVE ANY ITEM(S) TO OR FROM THE AUCTION AT ANY TIME.

6. PAYMENT IN FULL. Invoices for payment of full amount owed will be issued promptly after the auction. All invoiced amounts must be paid in full immediately but in no event later than the second business day after the auction. TIME IS OF-THE -ESSENCE with respect to such date. NOTHING SHALL BE REMOVED FROM THE PREMISES UNLESS AND UNTIL A BIDDER HAS PAID ALL OF ITS INVOICES IN FULL. BUYERS ARE ENCOURAGED TO PAY INVOICES ONLINE PRIOR TO PICK UP.

7. FORM OF PAYMENT. No personal or business checks will be accepted unless pre-approved by Auctioneer. Only cash, cashier's checks, wire transfer, pre-approved business checks and credit cards (up to $3000 - see fee info below) will be accepted.

8. CREDIT CARD FEE. Payments by way of Credit Card will ONLY be accepted for purchases and deposits which do not exceed $3000, subject to Auctioneer's discretion. An administration fee of 4% shall apply to credit card purchases.

9. REMOVAL TIMES TO BE SET BY AUCTIONEER. Removal shall take place by appointment only Friday, November 11th, Saturday, November 12th and Monday, November 14th. Times are 10AM to 4PM. Buyers will be able to book an appointment through a link on your invoice. Buyers requiring shipping see "Shipping & Handling" below.

10. REMOVAL MUST BE DONE IN A COMMERCIALLY REASONABLE MANNER. Successful bidders and/or their agents may be required to sign a Waiver & Release prior to any removal which must be done in a commercially reasonable fashion.

11. REMOVAL AT BIDDERS COST AND EXPENSE. All items must be removed by the successful bidder at their own cost and expense. After the time frame set forth on the Auctioneer schedule of move-out dates, the Auctioneer will no longer be responsible. Please be forewarned that in the case of a default, the auction company reserves the right to resell any and all unclaimed items and the defaulting bidder will not only forfeit his deposit but bear the responsibility of any shortfall in case of resale, and also all costs and expenses associated with the default as well as all auctioneer's fees and commissions. Buyers may either pick up their items at the designated auction site personally or can arrange for a third-party logistics firm to manage the removal process for them. If someone other than the registered buyer at the sale is designated to pick up those purchased assets, the buyer must contract with an independent logistics firm or other representative who will dismantle, crate, pack, load and/or ship your purchased items; coordinate the removal of those purchased items to meet the time deadlines indicated of this auction and authorize the auction company to release items to a third-party contractor for shipping, crating or packing purposes.

12. SHIPPING. Please note, in the event Buyers requests : Auctioneer will pack, ship, store, crate or rig items, the Auctioneer will charge an out-of-pocket shipping costs involved in packing and sending any merchandise, together with a small handling fee. Arrangements can be made by contacting Joe at: jcamilleri@auctionadvisors.com or text/call 908 329-7877.

13. ALL BIDS ARE FINAL. All sales shall be concluded as indicated by the Auctioneer and no Purchaser may thereafter revoke their bid. Title to the lots purchased shall not pass until payment in full of the purchase price is received.

14. BUYER'S PREMIUM. A seventeen percent (17%) buyer's premium is in effect for all successful bidders at this auction.

15. AUCTIONEER FINAL ARBITER. The Auctioneer is the final judge in case of a dispute. The final posting on auction day made by the auctioneer will take precedence over any previously printed materials. Auctioneer has the right at its sole and absolute discretion (should Auctioneer so choose to exercise it) to reject any and all bids Auctioneer deems unreasonable, entertain a bulk bid, a mini bulk bid or any package of lots. Further, Auctioneer may at its sole discretion set and/or alter bidding increments at any time.

16. BIDDER PARTICIPATION AT DISCRETION OF AUCTIONEER. All bidders must be at least 21 years of age. The auctioneer reserves the right to deny admission to the auction to any person the auctioneer deems to be abusive, disorderly, intoxicated or non-compliant with the terms and conditions for the auction, or a potential threat to be such or any individual who the Auctioneer, at its sole discretion, deems to be potentially disruptive to the auction or who the Auctioneer believes, at its discretion, cannot reasonably be relied upon to comply with these Terms & Conditions. The auctioneer also reserves the right to deny registration to any online bidder who does not qualify to bid.
Listing Information
Liquidation Auction of HVAC Testing, Adjusting & Balancing Company (NEBB & TABB Certified). Full range of Tools/Equipment in excellent condition - many still calibrated. Includes brands such as GE, ShortRidge, Alnor, Monarch, Fluke, Cooper, HOBO, Sheave, Ashcroft, Condor, ProVision, Shimpo, and more. TAB-specific devices and equipment: HyrdoData Multimeters,AirData Multimeters,UltraSonic Flow Meters, Crystals (#30, #113, #402, #408),Anemometers, Strobes,Logging Devices, Temperature Meter, AmpClamp, "I" Flex Cables, Laser Alignment System, Temperature Humidity Meter, Ventilation Meter, Tachometer, Mounting/Racking, 0-400 PSIG Pressure Gauges (still within calibration dates), Hood Bases, Hood Skirts, Plumbing Fittings, Safety Gear and more. Other tools and technology being sold: IN FOCUS Digital Smart Board, OCE Plotwave 340 Large Format Printer, Rock & Roll Carts, DeWalt Job Chest, DeWalt Cordless Drill/Driver/Saw, Milwaukee Power Tools and a Milwaukee Force Logic Press Ring Kit.

1
Sheaves, Pipe Taps, Micrometer Calipers, More
2 - Straight Tap Wrench 1/4" - 3/4" 2 - Belt Tension Checkers 1 - Starrett Micrometer Calipers 12 - Sheaves Various Sizes (see photos) 3 - Sheave Guides Set of Pipe Taps 2 Crates of Belts (Assorted Sizes) 3 - Wheel Pullers Assorted tools for Sheave ...

2
Duct Collars, Flex Hose, Leakage Testing, Gaskets
AD with Flange, most with Rubber Self Adhesive Gasket. Sizes range from 6" x 6" to 18" x 18". Varying quantities of each kind.

3
McGill 5" Calibrated Orifice Tubes
One is "like new" condition One is "very used" condition


5
ShortRidge Hood Skirts
1-20" x 67" 1-12" x 60" 1-24" x 48" 1-28" x 50" 1-12" x 48" 1-21" x 46.5" 1-28" x 28"

6
ShortRidge Hood Skirts
1-12" x 60" 2-24" x 48" 1-28" x 50" 1-12" x 48" 1-22.25" x 46.5" 1-28" x 28"


8
Hood Base with 24"x24" Skirt
Hood Base with 24" x 24" Skirt, Frames for other skirts, (2) handles.

9
Hood Base with 24"x24" Skirt
Hood Base with 24" x 24" Skirt, Frames for other skirts, (2) handles and 14" x 14" Frame and Skirt

10
Hood Base with 24" x 24" Skirt
Hood Base with 24" x 24" Skirt, Frames for other skirts, (1) handle.

10
Hood Base with 24"x24" & 14"x14" Skirt
1-Shortridge Hood Base in Carrying Case 1-24"x24" Hood Skirt 1-14"x14" Hood Skirt

11
ADM 860 cases with accessories only
1-ADM 860 Case with (3) Temp Probe Extensions, Meter Strap, Static Pressure Probe and some Hoses 1-ADM 860 Case Empty DOES NOT INCLUDE AMD860

12
Alnor APM150 & Hood Base 24" x 24" Skirt
Comes with two additional skirts and case

13
ShortRidge HDM 250 With Accessories
HDM 250/W05039 With Hoses, Assortment of Fittings, Charger and dP Slide Rules for Valves (Manuf.)

13
ShortRidge HDM 250 With Accessories
1- HDM 250/W17121 With Hoses, Assortment of Fittings, Charger and dP Slide Rules for Valves (Manuf.)

14
HOBO system logging devices
5-Radiation Shields 30-MX1101 Indoor Temperature & Humidity Data Loggers 2-MX2301 Outdoor Temperature & Humidity Data Loggers 2-Smart Flex Analog Modules 1-H22 Logger with Power Supply 2-Ashcroft 0-200 PSI Pressure Sensors for Hydronic Systems

14
Fluke 87, Fluke I-Flex Current Clamps and Fluke 31
1-Fluke 87/51601034 Multimeter in Case 2-Fluke "I" Flex 2500 Current Clamp 1-Fluke 31 Amp Clamp

15
Fluke 52II, Thermocouples and Dial Thermometers
1-Fluke 52II/96200091 Temperature Meter - Calibration valid until 10/6/22 2-Fluke 80K-Type Thermocouples - Calibration valid until 10/6/22 2-Taylor Dial Thermometer 0-220OF 1-Taylor Dial Thermometer -40-160OF 1-Universal Dial Thermometer -40-160OF ...

15
Field Kit with Anemometer, Strobe, ADM860 & more
1-Alnor Rotating Vane Anemometer S/N: TTI 136 1-Monarch Nova Strobe DB Plus S/N: 2431438 1-Plastic Container of Pneumatic Fittings (1/4" , 1/8") and Shortridge Battery Charger 1-Plastic Container of Electrical Wires for Fluke Meters and a Monarch Str...

15
Field Kit with Anemometer, Strode, ADM880c & more
1-Alnor Rotating Vane Anemometer S/N: TTI 129 1-Monarch Nova Strobe DBX S/N: 2578535 1-Shortridge ADM880C S/N: M05267 with Battery Charger 1-Velgrid 1-18" Air Foil 1-18" Pitot Tube 1-Plastic Container of Plugs

16
Alnor AP6000 w/ probes, Cooper SRH77A, Shimpo
1-Alnor AP6000 Selector Switch Handle and Probes 1-Cooper SRH77A and test probes all with calibration certification until 10/06/22. 1-Shimpo DT-207LR 1-ControlCompany Hygrometer.

16
Shortridge 32-158OF Temperature Sensors
9-Shortridge 32-158OF Temperature Sensors for Shortridge Air or water Meters

17
Fluke 376, ShortRidge ADM 880C, Monarch Strobe
1- Fluke 376 /2380563 1- Shortridge ADM 880C/M08146 with charger 1- Monarch DB Strobe/2423698 with charger 1- Velgrid with (3) stick 1- 18" Air Foil 1- 18" Pitot Tube 1- Pair of Hoses Comes inside Haliburton Case

17
ShortRidge ADM 860 and Alnor Rotating Vane
1-ADM 860 S/N M91640 1-Alnor Rotating Vane Anemometer S/N: TTI 130

18
Monarch DBX Strobe w/ charger in case
1-Monarch DBX Strobe/2578202 with charger Strobe calibration is current. Recalibration due 3/15/2023. 1-Velgrid with (2) stick 1-18" Air Foil 1-Pair of Hoses Comes inside Haliburton Case

19
TSI-9565 & TSI-8355 VelociCalc
TSI-9565: Unit is still within calibration date. Expires 10/6/2022. See photos. Stationary ring stand for the testing of bio safety cabinet. Attachments for probe holders for face velocity.

20
Monarch Nova Strobe & ProVision100 Borescope
Monarch Nova Strobe/2426115 with case. charger, extra bulb & Laser tachometer adaptor ProVision100 Borescope

21
Field Kit PT878 & 868 Meter w/ 3 sets of crystals
This was a complete kit used in the field for waterflow testing. 1- PT878/7318 Ultrasonic Flow Meter - PT878 calibration is current. Recalibration due 02/10/2023. 2- Pairs #113 Crystals 1- Pair #30 Crystals 1-PT868/3778 Ultrasonic Flow Meter 4 -...

22
Field Kit PT878 Flow Meter w/ 2 set of crystals
This was a complete kit used in the field for waterflow testing. 1-PT878/08408 Ultrasonic Flow Meter 1-Pair #402 Crystals 1-Pair #408 Crystals on 6" Rack for 0-2" pipes complete with wires in Black Canvas Case 3-Pair of Wires 2-12" Racks 1-Pocket Ro...

22
Field Kit PT878 Flow Meter w/ 3 sets of crystals
This was a complete kit used in the field for waterflow testing. 1-PT878/1830 Ultrasonic Flow Meter 2-12" Rack with Mounts 1-24" Rack with Mounts 1-Pocket Rocket Pipe Diameter Gauge up to 12" (Aluminum in Green Case) 1-Pocket Rocket Pipe Diameter Ga...

23
GE Panametrics PT900
1-2 Channel PT900/03170088 Ultrasonic Flow Meter. Unit is still within calibration date. Expires 02/10/2023. See photos. 1-Samsung Galaxy Tab A with software installed for PT900 operation 2-Pair # Crystals 2-Pair of wires 1-Power Supply 1-Thickness G...

24
Panametrics Equipment
Dual Block Mounts with chains for 24" rails 2RTD Panametric Themrosters

25
2 Ashcroft 0-400 PSIG Pressure Gauges
Calibrated on 5/23/2022 Certificate states next calibration needed by 5/23/2023

25
Pressure Gauging, hoses, fittings & more
1-Tool Box 2-14" Pipe Wrenches 1-4" 0-200 PSI Gauge 1-Valve Manifold with (3) Hoses Assorted Bushings, Couplings, ¼" Valves and fittings


27
Plug/Caps, Insulation Tape, Water Based Sealant
Plugs: 1/2" and 3/8" Insulation Tape: 4 @ 4" and 6 @ 3" Sealant: 2 Water Based Duct Sealant @ 1 Gallon Each Paint Brushes: 9 @ 2" and 1 @ 3" Light Gray Silicone

28
4 Crates filled with assorted goods
Copper and plastic sweat fittings Electrical fittings, Relays, Relay Switch Plates, spool of #12 White THHN Wire Refrigeration Tools



31
OCE Plotwave 340 Large Format Printer
Printer is lightly used for its age. Only has 52,500 pages printed which is about 5-10% of its lifespan. Last service administered 3/1/2022 with service report available for viewing. Lots includes rolls of papers: 2 @ 36" 1 @ 32" 1 @ 30"

32
HP LaserJet M3035xs MFP
Black and White Printer/Copier/Scanner/Fax

33
Marathon 10A & Toro Blowers
Marathon Model - YVB56C34F5524A Toro Model - 51624 Includes Husky bag with extension cord and fittings for 5" orifice tube




37
DeWalt Job Chest
31" H x 48" W x 30" D

38
Milwaukee Shears, Hilti Drill w/ charger/batteries
2 - Milwaukee Electric 18 Gauge Shears. P/N: 6852-20 1 - Hilti cordless 22V hammer drill 2 - Hilti B22 3.0 Li-Ion Batteries 1 - Hilti C 4/36-90 Li-Ion Battery Charger 1 - Kett Model K-200 Shear 1 - Hilti Tool Bag

39
DeWalt Cordless Drill Kits in cases
1 - DeWalt DCD950 Cordless Hammer Drills/Drill Driver 1 - DeWalt DCD775 Cordless Hammer Drill/Drill Driver 4 - DeWalt 18v XRP Batteries 2 - DeWalt DW9116 Chargers

40
Dewalt XRP 18V & DCD791 20V drills in cases
1-Dewalt XRP 18 V Drill Driver in Case with assorted bits. Also inside case is Dewalt DC825 Spin Tight Driver with assorted Chucks (1/4" 1/2") 2-18V batteries and 1 Battery Charger 1-Dewalt 20 V DCD791 Drill Driver in Carrying Case 2-20 Volt Batter...

99
DJI Phantom 4 Drone (WM330A)
Lot includes: 1-DJI Phantom 4 Drone - Model # - WM330A 1-DJI Controller - Model # - GL300C 1-Intelligent Flight Battery 4-Black Ring Propellers 2-Silver Ring Propellers 1-Dual Remote / Battery Charger 1-USB to Lightning Cable (Apple) 1-USB to Micro ...

100
Hand Tools, Cable Tester, Accessories
Ridgid Rolling Tool Carrier Klein Tools Scout 3 Pro 10 - Screwdrivers (Varying Length and Size) Channel Locks Pliers Milwaukee Snips 6 - 1/16" Clamp Set (Unopened) 4 - Low Voltage Mounting Brackets (Unopened) Husky 50ft Power Cord Blind Mark XT

101
Tools - New In Packaging
All item packaging is intact. 5 - Klein Pass-Thru Modular Crimper 1 - Klein Scout Pro 3 Cable Tester 2 - 12" Channel Lock 1 - Petechtool RJ45 Crimp Tool 1 - Klein Compression Coax F-Connector Installation Kit 1 - 16.5" Channel Lock 1 - Milwaukee Wir...

102
Force Logic Press Ring 2-1/2" - 4" Kit
Item is brand new and never used. Cardboard wrappings fell of during transport.

103
Like New DeWalt Drills, Saw and accessories
1-DeWalt DCF809 Cordless Impact Driver 1-DeWalt DCD708 Cordless Drill Driver 1-DeWalt DCS312 Compact Reciprocating Saw 1-DeWalt DCBP034 Charger and Battery (NIB) 3-DeWalt DCB201 Battery Packs 1-DeWalt DCB107 Charging Station 1-DeWalt Tough Case with ...

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Sponsored Links

HVAC Testing, Adjusting and Balancing Equipment Auction

AuctionAdvisors

AuctionAdvisors


Contact:
Phone: 973-753-1313
Sale Location
141 US-206
Hillsborough, NJ 08844
Sale Dates and Times
Sale Terms and Conditions
Auction Terms & Conditions of Bidder Participation Thank you for your interest in this Online Auction. These are the Terms and Conditions on which all property is offered for sale, subject to amendments and modifications announced by Auction Advisors ("Auctioneer") at the time of the auction and posted on the website. By bidding in this auction, prospective bidders agree to be bound by and comply with the following Terms & Conditions and acknowledge and agree that they are being allowed to participate at this auction in reliance on such agreement. 1. REGISTRATION. Bidders must be registered with: www.auctionadvisors.hibid.com and approved for bidding by Auctioneer. By registering you represent and warrant that any and all Buyer information is correct. Auctioneer reserves the right to deny any registered bidder at any time at its sole discretion without notification. 2. INSPECTIONS: Bidders may by appointment only inspect the offering on November 9th. Bidders may schedule a private in-person or virtual inspection by contacting Joe at jcamilleri@auctionadvisors.com or text/call 908 329-7877. 3. AS-IS WHERE-IS SALE. ALL SALES ARE FINAL, ON AN "AS IS WHERE IS", "IN PLACE" "WITH ALL FAULTS" BASIS WITH NO CONDITIONS OR WARRANTIES WHETHER EXPRESSED, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING WITHOUT LIMITATION, WARRANTIES OR CONDITIONS AS TO TITLE, DESCRIPTION, FITNESS FOR PURPOSE, QUANTITY, QUALITY, MERCHANTABILITY, STATE, CONDITION, LOCATION OR OTHERWISE. NO SALE SHALL BE INVALIDATED AND THE AUCTIONEER SHALL HAVE NO LIABILITY FOR A MISDESCRIPTION OF ANY ARTICLE OR LOT WHETHER CONTAINED IN A CATALOGUE, ADVERTISEMENT, ORAL ANNOUNCEMENT OR OTHERWISE. 4. DESCRIPTIONS. THE AUCTION CATALOGUE IS MERELY A GUIDE. DESCRIPTIONS HAVE BEEN PREPARED IN GOOD FAITH FOR GUIDE PURPOSES ONLY AND SHALL NOT BE RELIED UPON BY THE PURCHASER FOR ACCURACY, GENUINENESS, AUTHENTICITY OR COMPLETENESS. PLEASE INSPECT ALL ITEMS BEFORE BIDDING. PURCHASERS SHALL BE DEEMED TO HAVE RELIED ENTIRELY UPON THEIR OWN INSPECTIONS AND INVESTIGATIONS. IN ADDITION, AUCTIONEER RESERVES THE RIGHT TO ADD, ALTER, OR REMOVE ANY ITEM(S) TO OR FROM THE AUCTION AT ANY TIME. 6. PAYMENT IN FULL. Invoices for payment of full amount owed will be issued promptly after the auction. All invoiced amounts must be paid in full immediately but in no event later than the second business day after the auction. TIME IS OF-THE -ESSENCE with respect to such date. NOTHING SHALL BE REMOVED FROM THE PREMISES UNLESS AND UNTIL A BIDDER HAS PAID ALL OF ITS INVOICES IN FULL. BUYERS ARE ENCOURAGED TO PAY INVOICES ONLINE PRIOR TO PICK UP. 7. FORM OF PAYMENT. No personal or business checks will be accepted unless pre-approved by Auctioneer. Only cash, cashier's checks, wire transfer, pre-approved business checks and credit cards (up to $3000 - see fee info below) will be accepted. 8. CREDIT CARD FEE. Payments by way of Credit Card will ONLY be accepted for purchases and deposits which do not exceed $3000, subject to Auctioneer's discretion. An administration fee of 4% shall apply to credit card purchases. 9. REMOVAL TIMES TO BE SET BY AUCTIONEER. Removal shall take place by appointment only Friday, November 11th, Saturday, November 12th and Monday, November 14th. Times are 10AM to 4PM. Buyers will be able to book an appointment through a link on your invoice. Buyers requiring shipping see "Shipping & Handling" below. 10. REMOVAL MUST BE DONE IN A COMMERCIALLY REASONABLE MANNER. Successful bidders and/or their agents may be required to sign a Waiver & Release prior to any removal which must be done in a commercially reasonable fashion. 11. REMOVAL AT BIDDERS COST AND EXPENSE. All items must be removed by the successful bidder at their own cost and expense. After the time frame set forth on the Auctioneer schedule of move-out dates, the Auctioneer will no longer be responsible. Please be forewarned that in the case of a default, the auction company reserves the right to resell any and all unclaimed items and the defaulting bidder will not only forfeit his deposit but bear the responsibility of any shortfall in case of resale, and also all costs and expenses associated with the default as well as all auctioneer's fees and commissions. Buyers may either pick up their items at the designated auction site personally or can arrange for a third-party logistics firm to manage the removal process for them. If someone other than the registered buyer at the sale is designated to pick up those purchased assets, the buyer must contract with an independent logistics firm or other representative who will dismantle, crate, pack, load and/or ship your purchased items; coordinate the removal of those purchased items to meet the time deadlines indicated of this auction and authorize the auction company to release items to a third-party contractor for shipping, crating or packing purposes. 12. SHIPPING. Please note, in the event Buyers requests : Auctioneer will pack, ship, store, crate or rig items, the Auctioneer will charge an out-of-pocket shipping costs involved in packing and sending any merchandise, together with a small handling fee. Arrangements can be made by contacting Joe at: jcamilleri@auctionadvisors.com or text/call 908 329-7877. 13. ALL BIDS ARE FINAL. All sales shall be concluded as indicated by the Auctioneer and no Purchaser may thereafter revoke their bid. Title to the lots purchased shall not pass until payment in full of the purchase price is received. 14. BUYER'S PREMIUM. A seventeen percent (17%) buyer's premium is in effect for all successful bidders at this auction. 15. AUCTIONEER FINAL ARBITER. The Auctioneer is the final judge in case of a dispute. The final posting on auction day made by the auctioneer will take precedence over any previously printed materials. Auctioneer has the right at its sole and absolute discretion (should Auctioneer so choose to exercise it) to reject any and all bids Auctioneer deems unreasonable, entertain a bulk bid, a mini bulk bid or any package of lots. Further, Auctioneer may at its sole discretion set and/or alter bidding increments at any time. 16. BIDDER PARTICIPATION AT DISCRETION OF AUCTIONEER. All bidders must be at least 21 years of age. The auctioneer reserves the right to deny admission to the auction to any person the auctioneer deems to be abusive, disorderly, intoxicated or non-compliant with the terms and conditions for the auction, or a potential threat to be such or any individual who the Auctioneer, at its sole discretion, deems to be potentially disruptive to the auction or who the Auctioneer believes, at its discretion, cannot reasonably be relied upon to comply with these Terms & Conditions. The auctioneer also reserves the right to deny registration to any online bidder who does not qualify to bid.
Listing Details
Liquidation Auction of HVAC Testing, Adjusting & Balancing Company (NEBB & TABB Certified). Full range of Tools/Equipment in excellent condition - many still calibrated. Includes brands such as GE, ShortRidge, Alnor, Monarch, Fluke, Cooper, HOBO, Sheave, Ashcroft, Condor, ProVision, Shimpo, and more. TAB-specific devices and equipment: HyrdoData Multimeters,AirData Multimeters,UltraSonic Flow Meters, Crystals (#30, #113, #402, #408),Anemometers, Strobes,Logging Devices, Temperature Meter, AmpClamp, "I" Flex Cables, Laser Alignment System, Temperature Humidity Meter, Ventilation Meter, Tachometer, Mounting/Racking, 0-400 PSIG Pressure Gauges (still within calibration dates), Hood Bases, Hood Skirts, Plumbing Fittings, Safety Gear and more. Other tools and technology being sold: IN FOCUS Digital Smart Board, OCE Plotwave 340 Large Format Printer, Rock & Roll Carts, DeWalt Job Chest, DeWalt Cordless Drill/Driver/Saw, Milwaukee Power Tools and a Milwaukee Force Logic Press Ring Kit.

1
Sheaves, Pipe Taps, Micrometer Calipers, More
2 - Straight Tap Wrench 1/4" - 3/4" 2 - Belt Tension Checkers 1 - Starrett Micrometer Calipers 12 - Sheaves Various Sizes (see photos) 3 - Sheave Guides Set of Pipe Taps 2 Crates of Belts (Assorted Sizes) 3 - Wheel Pullers Assorted tools for Sheave ...

2
Duct Collars, Flex Hose, Leakage Testing, Gaskets
AD with Flange, most with Rubber Self Adhesive Gasket. Sizes range from 6" x 6" to 18" x 18". Varying quantities of each kind.

3
McGill 5" Calibrated Orifice Tubes
One is "like new" condition One is "very used" condition


5
ShortRidge Hood Skirts
1-20" x 67" 1-12" x 60" 1-24" x 48" 1-28" x 50" 1-12" x 48" 1-21" x 46.5" 1-28" x 28"

6
ShortRidge Hood Skirts
1-12" x 60" 2-24" x 48" 1-28" x 50" 1-12" x 48" 1-22.25" x 46.5" 1-28" x 28"


8
Hood Base with 24"x24" Skirt
Hood Base with 24" x 24" Skirt, Frames for other skirts, (2) handles.

9
Hood Base with 24"x24" Skirt
Hood Base with 24" x 24" Skirt, Frames for other skirts, (2) handles and 14" x 14" Frame and Skirt

10
Hood Base with 24" x 24" Skirt
Hood Base with 24" x 24" Skirt, Frames for other skirts, (1) handle.

10
Hood Base with 24"x24" & 14"x14" Skirt
1-Shortridge Hood Base in Carrying Case 1-24"x24" Hood Skirt 1-14"x14" Hood Skirt

11
ADM 860 cases with accessories only
1-ADM 860 Case with (3) Temp Probe Extensions, Meter Strap, Static Pressure Probe and some Hoses 1-ADM 860 Case Empty DOES NOT INCLUDE AMD860

12
Alnor APM150 & Hood Base 24" x 24" Skirt
Comes with two additional skirts and case

13
ShortRidge HDM 250 With Accessories
HDM 250/W05039 With Hoses, Assortment of Fittings, Charger and dP Slide Rules for Valves (Manuf.)

13
ShortRidge HDM 250 With Accessories
1- HDM 250/W17121 With Hoses, Assortment of Fittings, Charger and dP Slide Rules for Valves (Manuf.)

14
HOBO system logging devices
5-Radiation Shields 30-MX1101 Indoor Temperature & Humidity Data Loggers 2-MX2301 Outdoor Temperature & Humidity Data Loggers 2-Smart Flex Analog Modules 1-H22 Logger with Power Supply 2-Ashcroft 0-200 PSI Pressure Sensors for Hydronic Systems

14
Fluke 87, Fluke I-Flex Current Clamps and Fluke 31
1-Fluke 87/51601034 Multimeter in Case 2-Fluke "I" Flex 2500 Current Clamp 1-Fluke 31 Amp Clamp

15
Fluke 52II, Thermocouples and Dial Thermometers
1-Fluke 52II/96200091 Temperature Meter - Calibration valid until 10/6/22 2-Fluke 80K-Type Thermocouples - Calibration valid until 10/6/22 2-Taylor Dial Thermometer 0-220OF 1-Taylor Dial Thermometer -40-160OF 1-Universal Dial Thermometer -40-160OF ...

15
Field Kit with Anemometer, Strobe, ADM860 & more
1-Alnor Rotating Vane Anemometer S/N: TTI 136 1-Monarch Nova Strobe DB Plus S/N: 2431438 1-Plastic Container of Pneumatic Fittings (1/4" , 1/8") and Shortridge Battery Charger 1-Plastic Container of Electrical Wires for Fluke Meters and a Monarch Str...

15
Field Kit with Anemometer, Strode, ADM880c & more
1-Alnor Rotating Vane Anemometer S/N: TTI 129 1-Monarch Nova Strobe DBX S/N: 2578535 1-Shortridge ADM880C S/N: M05267 with Battery Charger 1-Velgrid 1-18" Air Foil 1-18" Pitot Tube 1-Plastic Container of Plugs

16
Alnor AP6000 w/ probes, Cooper SRH77A, Shimpo
1-Alnor AP6000 Selector Switch Handle and Probes 1-Cooper SRH77A and test probes all with calibration certification until 10/06/22. 1-Shimpo DT-207LR 1-ControlCompany Hygrometer.

16
Shortridge 32-158OF Temperature Sensors
9-Shortridge 32-158OF Temperature Sensors for Shortridge Air or water Meters

17
Fluke 376, ShortRidge ADM 880C, Monarch Strobe
1- Fluke 376 /2380563 1- Shortridge ADM 880C/M08146 with charger 1- Monarch DB Strobe/2423698 with charger 1- Velgrid with (3) stick 1- 18" Air Foil 1- 18" Pitot Tube 1- Pair of Hoses Comes inside Haliburton Case

17
ShortRidge ADM 860 and Alnor Rotating Vane
1-ADM 860 S/N M91640 1-Alnor Rotating Vane Anemometer S/N: TTI 130

18
Monarch DBX Strobe w/ charger in case
1-Monarch DBX Strobe/2578202 with charger Strobe calibration is current. Recalibration due 3/15/2023. 1-Velgrid with (2) stick 1-18" Air Foil 1-Pair of Hoses Comes inside Haliburton Case

19
TSI-9565 & TSI-8355 VelociCalc
TSI-9565: Unit is still within calibration date. Expires 10/6/2022. See photos. Stationary ring stand for the testing of bio safety cabinet. Attachments for probe holders for face velocity.

20
Monarch Nova Strobe & ProVision100 Borescope
Monarch Nova Strobe/2426115 with case. charger, extra bulb & Laser tachometer adaptor ProVision100 Borescope

21
Field Kit PT878 & 868 Meter w/ 3 sets of crystals
This was a complete kit used in the field for waterflow testing. 1- PT878/7318 Ultrasonic Flow Meter - PT878 calibration is current. Recalibration due 02/10/2023. 2- Pairs #113 Crystals 1- Pair #30 Crystals 1-PT868/3778 Ultrasonic Flow Meter 4 -...

22
Field Kit PT878 Flow Meter w/ 2 set of crystals
This was a complete kit used in the field for waterflow testing. 1-PT878/08408 Ultrasonic Flow Meter 1-Pair #402 Crystals 1-Pair #408 Crystals on 6" Rack for 0-2" pipes complete with wires in Black Canvas Case 3-Pair of Wires 2-12" Racks 1-Pocket Ro...

22
Field Kit PT878 Flow Meter w/ 3 sets of crystals
This was a complete kit used in the field for waterflow testing. 1-PT878/1830 Ultrasonic Flow Meter 2-12" Rack with Mounts 1-24" Rack with Mounts 1-Pocket Rocket Pipe Diameter Gauge up to 12" (Aluminum in Green Case) 1-Pocket Rocket Pipe Diameter Ga...

23
GE Panametrics PT900
1-2 Channel PT900/03170088 Ultrasonic Flow Meter. Unit is still within calibration date. Expires 02/10/2023. See photos. 1-Samsung Galaxy Tab A with software installed for PT900 operation 2-Pair # Crystals 2-Pair of wires 1-Power Supply 1-Thickness G...

24
Panametrics Equipment
Dual Block Mounts with chains for 24" rails 2RTD Panametric Themrosters

25
2 Ashcroft 0-400 PSIG Pressure Gauges
Calibrated on 5/23/2022 Certificate states next calibration needed by 5/23/2023

25
Pressure Gauging, hoses, fittings & more
1-Tool Box 2-14" Pipe Wrenches 1-4" 0-200 PSI Gauge 1-Valve Manifold with (3) Hoses Assorted Bushings, Couplings, ¼" Valves and fittings


27
Plug/Caps, Insulation Tape, Water Based Sealant
Plugs: 1/2" and 3/8" Insulation Tape: 4 @ 4" and 6 @ 3" Sealant: 2 Water Based Duct Sealant @ 1 Gallon Each Paint Brushes: 9 @ 2" and 1 @ 3" Light Gray Silicone

28
4 Crates filled with assorted goods
Copper and plastic sweat fittings Electrical fittings, Relays, Relay Switch Plates, spool of #12 White THHN Wire Refrigeration Tools



31
OCE Plotwave 340 Large Format Printer
Printer is lightly used for its age. Only has 52,500 pages printed which is about 5-10% of its lifespan. Last service administered 3/1/2022 with service report available for viewing. Lots includes rolls of papers: 2 @ 36" 1 @ 32" 1 @ 30"

32
HP LaserJet M3035xs MFP
Black and White Printer/Copier/Scanner/Fax

33
Marathon 10A & Toro Blowers
Marathon Model - YVB56C34F5524A Toro Model - 51624 Includes Husky bag with extension cord and fittings for 5" orifice tube




37
DeWalt Job Chest
31" H x 48" W x 30" D

38
Milwaukee Shears, Hilti Drill w/ charger/batteries
2 - Milwaukee Electric 18 Gauge Shears. P/N: 6852-20 1 - Hilti cordless 22V hammer drill 2 - Hilti B22 3.0 Li-Ion Batteries 1 - Hilti C 4/36-90 Li-Ion Battery Charger 1 - Kett Model K-200 Shear 1 - Hilti Tool Bag

39
DeWalt Cordless Drill Kits in cases
1 - DeWalt DCD950 Cordless Hammer Drills/Drill Driver 1 - DeWalt DCD775 Cordless Hammer Drill/Drill Driver 4 - DeWalt 18v XRP Batteries 2 - DeWalt DW9116 Chargers

40
Dewalt XRP 18V & DCD791 20V drills in cases
1-Dewalt XRP 18 V Drill Driver in Case with assorted bits. Also inside case is Dewalt DC825 Spin Tight Driver with assorted Chucks (1/4" 1/2") 2-18V batteries and 1 Battery Charger 1-Dewalt 20 V DCD791 Drill Driver in Carrying Case 2-20 Volt Batter...

99
DJI Phantom 4 Drone (WM330A)
Lot includes: 1-DJI Phantom 4 Drone - Model # - WM330A 1-DJI Controller - Model # - GL300C 1-Intelligent Flight Battery 4-Black Ring Propellers 2-Silver Ring Propellers 1-Dual Remote / Battery Charger 1-USB to Lightning Cable (Apple) 1-USB to Micro ...

100
Hand Tools, Cable Tester, Accessories
Ridgid Rolling Tool Carrier Klein Tools Scout 3 Pro 10 - Screwdrivers (Varying Length and Size) Channel Locks Pliers Milwaukee Snips 6 - 1/16" Clamp Set (Unopened) 4 - Low Voltage Mounting Brackets (Unopened) Husky 50ft Power Cord Blind Mark XT

101
Tools - New In Packaging
All item packaging is intact. 5 - Klein Pass-Thru Modular Crimper 1 - Klein Scout Pro 3 Cable Tester 2 - 12" Channel Lock 1 - Petechtool RJ45 Crimp Tool 1 - Klein Compression Coax F-Connector Installation Kit 1 - 16.5" Channel Lock 1 - Milwaukee Wir...

102
Force Logic Press Ring 2-1/2" - 4" Kit
Item is brand new and never used. Cardboard wrappings fell of during transport.

103
Like New DeWalt Drills, Saw and accessories
1-DeWalt DCF809 Cordless Impact Driver 1-DeWalt DCD708 Cordless Drill Driver 1-DeWalt DCS312 Compact Reciprocating Saw 1-DeWalt DCBP034 Charger and Battery (NIB) 3-DeWalt DCB201 Battery Packs 1-DeWalt DCB107 Charging Station 1-DeWalt Tough Case with ...

Gallery Images Loading, Please Wait...
  • Home
  • Advertise Your Estate Sale for $39
  • Hire an Estate Sale Company
  • Add Your Estate Sale Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
HVAC Testing, Adjusting and Balancing Equipment Auction
 Online Only Auction
Sale Date(s)
Bidding Starts: Monday Nov 7
Bidding Ends: Thursday Nov 10
Sale Location

Hillsborough, NJ 08844
Listing Terms and Conditions
Auction Terms & Conditions of Bidder Participation Thank you for your interest in this Online Auction. These are the Terms and Conditions on which all property is offered for sale, subject to amendments and modifications announced by Auction Advisors ("Auctioneer") at the time of the auction and posted on the website. By bidding in this auction, prospective bidders agree to be bound by and comply with the following Terms & Conditions and acknowledge and agree that they are being allowed to participate at this auction in reliance on such agreement. 1. REGISTRATION. Bidders must be registered with: www.auctionadvisors.hibid.com and approved for bidding by Auctioneer. By registering you represent and warrant that any and all Buyer information is correct. Auctioneer reserves the right to deny any registered bidder at any time at its sole discretion without notification. 2. INSPECTIONS: Bidders may by appointment only inspect the offering on November 9th. Bidders may schedule a private in-person or virtual inspection by contacting Joe at jcamilleri@auctionadvisors.com or text/call 908 329-7877. 3. AS-IS WHERE-IS SALE. ALL SALES ARE FINAL, ON AN "AS IS WHERE IS", "IN PLACE" "WITH ALL FAULTS" BASIS WITH NO CONDITIONS OR WARRANTIES WHETHER EXPRESSED, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING WITHOUT LIMITATION, WARRANTIES OR CONDITIONS AS TO TITLE, DESCRIPTION, FITNESS FOR PURPOSE, QUANTITY, QUALITY, MERCHANTABILITY, STATE, CONDITION, LOCATION OR OTHERWISE. NO SALE SHALL BE INVALIDATED AND THE AUCTIONEER SHALL HAVE NO LIABILITY FOR A MISDESCRIPTION OF ANY ARTICLE OR LOT WHETHER CONTAINED IN A CATALOGUE, ADVERTISEMENT, ORAL ANNOUNCEMENT OR OTHERWISE. 4. DESCRIPTIONS. THE AUCTION CATALOGUE IS MERELY A GUIDE. DESCRIPTIONS HAVE BEEN PREPARED IN GOOD FAITH FOR GUIDE PURPOSES ONLY AND SHALL NOT BE RELIED UPON BY THE PURCHASER FOR ACCURACY, GENUINENESS, AUTHENTICITY OR COMPLETENESS. PLEASE INSPECT ALL ITEMS BEFORE BIDDING. PURCHASERS SHALL BE DEEMED TO HAVE RELIED ENTIRELY UPON THEIR OWN INSPECTIONS AND INVESTIGATIONS. IN ADDITION, AUCTIONEER RESERVES THE RIGHT TO ADD, ALTER, OR REMOVE ANY ITEM(S) TO OR FROM THE AUCTION AT ANY TIME. 6. PAYMENT IN FULL. Invoices for payment of full amount owed will be issued promptly after the auction. All invoiced amounts must be paid in full immediately but in no event later than the second business day after the auction. TIME IS OF-THE -ESSENCE with respect to such date. NOTHING SHALL BE REMOVED FROM THE PREMISES UNLESS AND UNTIL A BIDDER HAS PAID ALL OF ITS INVOICES IN FULL. BUYERS ARE ENCOURAGED TO PAY INVOICES ONLINE PRIOR TO PICK UP. 7. FORM OF PAYMENT. No personal or business checks will be accepted unless pre-approved by Auctioneer. Only cash, cashier's checks, wire transfer, pre-approved business checks and credit cards (up to $3000 - see fee info below) will be accepted. 8. CREDIT CARD FEE. Payments by way of Credit Card will ONLY be accepted for purchases and deposits which do not exceed $3000, subject to Auctioneer's discretion. An administration fee of 4% shall apply to credit card purchases. 9. REMOVAL TIMES TO BE SET BY AUCTIONEER. Removal shall take place by appointment only Friday, November 11th, Saturday, November 12th and Monday, November 14th. Times are 10AM to 4PM. Buyers will be able to book an appointment through a link on your invoice. Buyers requiring shipping see "Shipping & Handling" below. 10. REMOVAL MUST BE DONE IN A COMMERCIALLY REASONABLE MANNER. Successful bidders and/or their agents may be required to sign a Waiver & Release prior to any removal which must be done in a commercially reasonable fashion. 11. REMOVAL AT BIDDERS COST AND EXPENSE. All items must be removed by the successful bidder at their own cost and expense. After the time frame set forth on the Auctioneer schedule of move-out dates, the Auctioneer will no longer be responsible. Please be forewarned that in the case of a default, the auction company reserves the right to resell any and all unclaimed items and the defaulting bidder will not only forfeit his deposit but bear the responsibility of any shortfall in case of resale, and also all costs and expenses associated with the default as well as all auctioneer's fees and commissions. Buyers may either pick up their items at the designated auction site personally or can arrange for a third-party logistics firm to manage the removal process for them. If someone other than the registered buyer at the sale is designated to pick up those purchased assets, the buyer must contract with an independent logistics firm or other representative who will dismantle, crate, pack, load and/or ship your purchased items; coordinate the removal of those purchased items to meet the time deadlines indicated of this auction and authorize the auction company to release items to a third-party contractor for shipping, crating or packing purposes. 12. SHIPPING. Please note, in the event Buyers requests : Auctioneer will pack, ship, store, crate or rig items, the Auctioneer will charge an out-of-pocket shipping costs involved in packing and sending any merchandise, together with a small handling fee. Arrangements can be made by contacting Joe at: jcamilleri@auctionadvisors.com or text/call 908 329-7877. 13. ALL BIDS ARE FINAL. All sales shall be concluded as indicated by the Auctioneer and no Purchaser may thereafter revoke their bid. Title to the lots purchased shall not pass until payment in full of the purchase price is received. 14. BUYER'S PREMIUM. A seventeen percent (17%) buyer's premium is in effect for all successful bidders at this auction. 15. AUCTIONEER FINAL ARBITER. The Auctioneer is the final judge in case of a dispute. The final posting on auction day made by the auctioneer will take precedence over any previously printed materials. Auctioneer has the right at its sole and absolute discretion (should Auctioneer so choose to exercise it) to reject any and all bids Auctioneer deems unreasonable, entertain a bulk bid, a mini bulk bid or any package of lots. Further, Auctioneer may at its sole discretion set and/or alter bidding increments at any time. 16. BIDDER PARTICIPATION AT DISCRETION OF AUCTIONEER. All bidders must be at least 21 years of age. The auctioneer reserves the right to deny admission to the auction to any person the auctioneer deems to be abusive, disorderly, intoxicated or non-compliant with the terms and conditions for the auction, or a potential threat to be such or any individual who the Auctioneer, at its sole discretion, deems to be potentially disruptive to the auction or who the Auctioneer believes, at its discretion, cannot reasonably be relied upon to comply with these Terms & Conditions. The auctioneer also reserves the right to deny registration to any online bidder who does not qualify to bid.
Liquidation Auction of HVAC Testing, Adjusting & Balancing Company (NEBB & TABB Certified). Full range of Tools/Equipment in excellent condition - many still calibrated. Includes brands such as GE, ShortRidge, Alnor, Monarch, Fluke, Cooper, HOBO, Sheave, Ashcroft, Condor, ProVision, Shimpo, and more. TAB-specific devices and equipment: HyrdoData Multimeters,AirData Multimeters,UltraSonic Flow Meters, Crystals (#30, #113, #402, #408),Anemometers, Strobes,Logging Devices, Temperature Meter, AmpClamp, "I" Flex Cables, Laser Alignment System, Temperature Humidity Meter, Ventilation Meter, Tachometer, Mounting/Racking, 0-400 PSIG Pressure Gauges (still within calibration dates), Hood Bases, Hood Skirts, Plumbing Fittings, Safety Gear and more. Other tools and technology being sold: IN FOCUS Digital Smart Board, OCE Plotwave 340 Large Format Printer, Rock & Roll Carts, DeWalt Job Chest, DeWalt Cordless Drill/Driver/Saw, Milwaukee Power Tools and a Milwaukee Force Logic Press Ring Kit.

1
Sheaves, Pipe Taps, Micrometer Calipers, More
2 - Straight Tap Wrench 1/4" - 3/4" 2 - Belt Tension Checkers 1 - Starrett Micrometer Calipers 12 - Sheaves Various Sizes (see photos) 3 - Sheave Guides Set of Pipe Taps 2 Crates of Belts (Assorted Sizes) 3 - Wheel Pullers Assorted tools for Sheave ...

2
Duct Collars, Flex Hose, Leakage Testing, Gaskets
AD with Flange, most with Rubber Self Adhesive Gasket. Sizes range from 6" x 6" to 18" x 18". Varying quantities of each kind.

3
McGill 5" Calibrated Orifice Tubes
One is "like new" condition One is "very used" condition

4

5
ShortRidge Hood Skirts
1-20" x 67" 1-12" x 60" 1-24" x 48" 1-28" x 50" 1-12" x 48" 1-21" x 46.5" 1-28" x 28"

6
ShortRidge Hood Skirts
1-12" x 60" 2-24" x 48" 1-28" x 50" 1-12" x 48" 1-22.25" x 46.5" 1-28" x 28"

7

8
Hood Base with 24"x24" Skirt
Hood Base with 24" x 24" Skirt, Frames for other skirts, (2) handles.

9
Hood Base with 24"x24" Skirt
Hood Base with 24" x 24" Skirt, Frames for other skirts, (2) handles and 14" x 14" Frame and Skirt

10
Hood Base with 24" x 24" Skirt
Hood Base with 24" x 24" Skirt, Frames for other skirts, (1) handle.

10
Hood Base with 24"x24" & 14"x14" Skirt
1-Shortridge Hood Base in Carrying Case 1-24"x24" Hood Skirt 1-14"x14" Hood Skirt

11
ADM 860 cases with accessories only
1-ADM 860 Case with (3) Temp Probe Extensions, Meter Strap, Static Pressure Probe and some Hoses 1-ADM 860 Case Empty DOES NOT INCLUDE AMD860

12
Alnor APM150 & Hood Base 24" x 24" Skirt
Comes with two additional skirts and case

13
ShortRidge HDM 250 With Accessories
HDM 250/W05039 With Hoses, Assortment of Fittings, Charger and dP Slide Rules for Valves (Manuf.)

13
ShortRidge HDM 250 With Accessories
1- HDM 250/W17121 With Hoses, Assortment of Fittings, Charger and dP Slide Rules for Valves (Manuf.)

14
HOBO system logging devices
5-Radiation Shields 30-MX1101 Indoor Temperature & Humidity Data Loggers 2-MX2301 Outdoor Temperature & Humidity Data Loggers 2-Smart Flex Analog Modules 1-H22 Logger with Power Supply 2-Ashcroft 0-200 PSI Pressure Sensors for Hydronic Systems

14
Fluke 87, Fluke I-Flex Current Clamps and Fluke 31
1-Fluke 87/51601034 Multimeter in Case 2-Fluke "I" Flex 2500 Current Clamp 1-Fluke 31 Amp Clamp

15
Fluke 52II, Thermocouples and Dial Thermometers
1-Fluke 52II/96200091 Temperature Meter - Calibration valid until 10/6/22 2-Fluke 80K-Type Thermocouples - Calibration valid until 10/6/22 2-Taylor Dial Thermometer 0-220OF 1-Taylor Dial Thermometer -40-160OF 1-Universal Dial Thermometer -40-160OF ...

15
Field Kit with Anemometer, Strobe, ADM860 & more
1-Alnor Rotating Vane Anemometer S/N: TTI 136 1-Monarch Nova Strobe DB Plus S/N: 2431438 1-Plastic Container of Pneumatic Fittings (1/4" , 1/8") and Shortridge Battery Charger 1-Plastic Container of Electrical Wires for Fluke Meters and a Monarch Str...

15
Field Kit with Anemometer, Strode, ADM880c & more
1-Alnor Rotating Vane Anemometer S/N: TTI 129 1-Monarch Nova Strobe DBX S/N: 2578535 1-Shortridge ADM880C S/N: M05267 with Battery Charger 1-Velgrid 1-18" Air Foil 1-18" Pitot Tube 1-Plastic Container of Plugs

16
Alnor AP6000 w/ probes, Cooper SRH77A, Shimpo
1-Alnor AP6000 Selector Switch Handle and Probes 1-Cooper SRH77A and test probes all with calibration certification until 10/06/22. 1-Shimpo DT-207LR 1-ControlCompany Hygrometer.

16
Shortridge 32-158OF Temperature Sensors
9-Shortridge 32-158OF Temperature Sensors for Shortridge Air or water Meters

17
Fluke 376, ShortRidge ADM 880C, Monarch Strobe
1- Fluke 376 /2380563 1- Shortridge ADM 880C/M08146 with charger 1- Monarch DB Strobe/2423698 with charger 1- Velgrid with (3) stick 1- 18" Air Foil 1- 18" Pitot Tube 1- Pair of Hoses Comes inside Haliburton Case

17
ShortRidge ADM 860 and Alnor Rotating Vane
1-ADM 860 S/N M91640 1-Alnor Rotating Vane Anemometer S/N: TTI 130

18
Monarch DBX Strobe w/ charger in case
1-Monarch DBX Strobe/2578202 with charger Strobe calibration is current. Recalibration due 3/15/2023. 1-Velgrid with (2) stick 1-18" Air Foil 1-Pair of Hoses Comes inside Haliburton Case

19
TSI-9565 & TSI-8355 VelociCalc
TSI-9565: Unit is still within calibration date. Expires 10/6/2022. See photos. Stationary ring stand for the testing of bio safety cabinet. Attachments for probe holders for face velocity.

20
Monarch Nova Strobe & ProVision100 Borescope
Monarch Nova Strobe/2426115 with case. charger, extra bulb & Laser tachometer adaptor ProVision100 Borescope

21
Field Kit PT878 & 868 Meter w/ 3 sets of crystals
This was a complete kit used in the field for waterflow testing. 1- PT878/7318 Ultrasonic Flow Meter - PT878 calibration is current. Recalibration due 02/10/2023. 2- Pairs #113 Crystals 1- Pair #30 Crystals 1-PT868/3778 Ultrasonic Flow Meter 4 -...

22
Field Kit PT878 Flow Meter w/ 2 set of crystals
This was a complete kit used in the field for waterflow testing. 1-PT878/08408 Ultrasonic Flow Meter 1-Pair #402 Crystals 1-Pair #408 Crystals on 6" Rack for 0-2" pipes complete with wires in Black Canvas Case 3-Pair of Wires 2-12" Racks 1-Pocket Ro...

22
Field Kit PT878 Flow Meter w/ 3 sets of crystals
This was a complete kit used in the field for waterflow testing. 1-PT878/1830 Ultrasonic Flow Meter 2-12" Rack with Mounts 1-24" Rack with Mounts 1-Pocket Rocket Pipe Diameter Gauge up to 12" (Aluminum in Green Case) 1-Pocket Rocket Pipe Diameter Ga...

23
GE Panametrics PT900
1-2 Channel PT900/03170088 Ultrasonic Flow Meter. Unit is still within calibration date. Expires 02/10/2023. See photos. 1-Samsung Galaxy Tab A with software installed for PT900 operation 2-Pair # Crystals 2-Pair of wires 1-Power Supply 1-Thickness G...

24
Panametrics Equipment
Dual Block Mounts with chains for 24" rails 2RTD Panametric Themrosters

25
2 Ashcroft 0-400 PSIG Pressure Gauges
Calibrated on 5/23/2022 Certificate states next calibration needed by 5/23/2023

25
Pressure Gauging, hoses, fittings & more
1-Tool Box 2-14" Pipe Wrenches 1-4" 0-200 PSI Gauge 1-Valve Manifold with (3) Hoses Assorted Bushings, Couplings, ¼" Valves and fittings

26

27
Plug/Caps, Insulation Tape, Water Based Sealant
Plugs: 1/2" and 3/8" Insulation Tape: 4 @ 4" and 6 @ 3" Sealant: 2 Water Based Duct Sealant @ 1 Gallon Each Paint Brushes: 9 @ 2" and 1 @ 3" Light Gray Silicone

28
4 Crates filled with assorted goods
Copper and plastic sweat fittings Electrical fittings, Relays, Relay Switch Plates, spool of #12 White THHN Wire Refrigeration Tools

29

30

31
OCE Plotwave 340 Large Format Printer
Printer is lightly used for its age. Only has 52,500 pages printed which is about 5-10% of its lifespan. Last service administered 3/1/2022 with service report available for viewing. Lots includes rolls of papers: 2 @ 36" 1 @ 32" 1 @ 30"

32
HP LaserJet M3035xs MFP
Black and White Printer/Copier/Scanner/Fax

33
Marathon 10A & Toro Blowers
Marathon Model - YVB56C34F5524A Toro Model - 51624 Includes Husky bag with extension cord and fittings for 5" orifice tube

34

35

36

37
DeWalt Job Chest
31" H x 48" W x 30" D

38
Milwaukee Shears, Hilti Drill w/ charger/batteries
2 - Milwaukee Electric 18 Gauge Shears. P/N: 6852-20 1 - Hilti cordless 22V hammer drill 2 - Hilti B22 3.0 Li-Ion Batteries 1 - Hilti C 4/36-90 Li-Ion Battery Charger 1 - Kett Model K-200 Shear 1 - Hilti Tool Bag

39
DeWalt Cordless Drill Kits in cases
1 - DeWalt DCD950 Cordless Hammer Drills/Drill Driver 1 - DeWalt DCD775 Cordless Hammer Drill/Drill Driver 4 - DeWalt 18v XRP Batteries 2 - DeWalt DW9116 Chargers

40
Dewalt XRP 18V & DCD791 20V drills in cases
1-Dewalt XRP 18 V Drill Driver in Case with assorted bits. Also inside case is Dewalt DC825 Spin Tight Driver with assorted Chucks (1/4" 1/2") 2-18V batteries and 1 Battery Charger 1-Dewalt 20 V DCD791 Drill Driver in Carrying Case 2-20 Volt Batter...

99
DJI Phantom 4 Drone (WM330A)
Lot includes: 1-DJI Phantom 4 Drone - Model # - WM330A 1-DJI Controller - Model # - GL300C 1-Intelligent Flight Battery 4-Black Ring Propellers 2-Silver Ring Propellers 1-Dual Remote / Battery Charger 1-USB to Lightning Cable (Apple) 1-USB to Micro ...

100
Hand Tools, Cable Tester, Accessories
Ridgid Rolling Tool Carrier Klein Tools Scout 3 Pro 10 - Screwdrivers (Varying Length and Size) Channel Locks Pliers Milwaukee Snips 6 - 1/16" Clamp Set (Unopened) 4 - Low Voltage Mounting Brackets (Unopened) Husky 50ft Power Cord Blind Mark XT

101
Tools - New In Packaging
All item packaging is intact. 5 - Klein Pass-Thru Modular Crimper 1 - Klein Scout Pro 3 Cable Tester 2 - 12" Channel Lock 1 - Petechtool RJ45 Crimp Tool 1 - Klein Compression Coax F-Connector Installation Kit 1 - 16.5" Channel Lock 1 - Milwaukee Wir...

102
Force Logic Press Ring 2-1/2" - 4" Kit
Item is brand new and never used. Cardboard wrappings fell of during transport.

103
Like New DeWalt Drills, Saw and accessories
1-DeWalt DCF809 Cordless Impact Driver 1-DeWalt DCD708 Cordless Drill Driver 1-DeWalt DCS312 Compact Reciprocating Saw 1-DeWalt DCBP034 Charger and Battery (NIB) 3-DeWalt DCB201 Battery Packs 1-DeWalt DCB107 Charging Station 1-DeWalt Tough Case with ...