TERMS & CONDITIONS
BY PLACING A BID, BIDDER CERTIFIES THAT THEY HAVE READ AND WILL ABIDE BY ALL TERMS AND CONDITIONS AS STATED BELOW. IT IS THE BUYER'S RESPONSIBILITY TO UNDERSTAND ALL THE TERMS AND CONDITIONS PRIOR TO BIDDING.

All items are sold "AS IS, WHERE IS" with no warranty or guarantees, expressed or implied, by the seller or Hallberg Auction. Bidders accept all auction items/property "WITH ALL FAULTS", whether or not immediately apparent. It is strongly recommended that bidders thoroughly inspect items before placing a bid. Items are described as accurately as possible, but do not represent any guarantee by the seller or Hallberg Auction. By placing a bid, bidder signifies that they have inspected the item to their satisfaction.
By placing a bid, the bidder is entering into a contractual agreement to purchase the item(s) from the seller. Failure to follow through with payment and pickup of items could result in legal collection proceedings.

Pictures and Item Descriptions
Multiple photos will be included in item descriptions whenever possible; however, photos may or may not fully represent the item. Lighting, surroundings and other factors can affect the perception of an item in a photo; therefore, all bidders are responsible for their own personal inspection of the item(s) before placing a bid. Photos and descriptions are to be used as a guideline only.

Odometer, Mileage & Hour Meter readings are assumed to be correct. These assumptions do not constitute a guarantee. It is up to the bidder to validate the accuracy of the reading during the inspection process. Hallberg Auction is not liable for any inaccuracies pertaining to odometer, mileage and hour meter readings.

Auction Software
Hallberg Auction will not be held liable for any software or software malfunction discrepancies.

Invoicing
An invoice and payment instructions will be sent to each buyers registered email at the close of the auction. Please read email message completely for payment instructions. Please contact us at (800) 373-2255 if you do not receive an invoice from us within 24 hours of auction close.

Payment
Successful bidders must contact Hallberg Auction within 24 hours after receiving their invoice to confirm their method of payment.

Payment must be received within 7 days after the conclusion of the auction.

If payment is not received or payment arrangements made within 7 days after the conclusion of the auction, the buyer will lose all right, title and interest to the item(s), including any and all moneys.

Auction items will not be released for pickup until payment is made in full. Failure to comply with these terms will prohibit bidder from participating in future live or on-line auctions conducted by Hallberg Auction.

Item Pickup
Removal and/or transportation of item(s) won on auction shall be at the expense, liability and risk of the buyer. Any Items not removed within 3 weeks of the conclusion of the auction, unless arrangements have been made and agreed upon by seller, will be considered abandoned and the purchaser will lose all right, title and interest to the property, including any and all moneys from the buyer.

Returned Check Fees
A fee of $35.00 will be assessed on returned checks and may result in the bidder being denied access to future auctions. Be sure you are capable of paying immediately after the conclusion of the auction and realize your bids are not conditional upon financing.

Payment Procedures
Payments will be made to Hallberg Auction.
Forms of payment: Company/Personal Check, Cash, or Credit Card (with a 4% convenience fee for use of a credit card).
All Checks are to be made payable to Hallberg Auction
Mail checks to:
2409 Hwy 9
Buffalo Center, IA 50424

*Please include your bidder number in the memo line

If paying by credit card, please call our office at 800-373-2255 with your credit card information.
We accept Master Card, Visa, American Express and Discover.
There is a 4% convenience fee per transaction for all credit card purchases.

Titles
Titles will be sent via standard mail within ten days after payment has been received, unless otherwise specified in the description of the item, and will be mailed to the address provided by bidder upon registration.

Reserve Bidding
Items on auction may have an undisclosed reserve. Sellers, Hallberg Auction, or other agent of seller may bid on items up to reserve amount in order to aid in the sale of the item.
*By placing a bid, bidder signifies that they have inspected items to their satisfaction.
*Hallberg Auction reserves the right to remove any property prior to close of the auction.
*Hallberg Auction reserves the right to reject any bid at our discretion.
*Bidders who register at any of our auctions will be included in our mailing lists to receive print or digital communication regarding upcoming auctions. Your information will not be sold to third parties and you may opt out of receiving notices at any time.
Item Descriptions are for Identification purposes; they constitute no warranties expressed or implied. You are encouraged to make your own in-person inspection of all property before bidding.

Two DaySapp Machinery Auction2409 Highway 9, Buffalo Center, IowaThursday September 8that 10:00 a.m.Live auction with online simulcast biddingEarly ListingsTractors from the Jack Angle Collection: John Deere 4010 High Crop (Diesel, Good Rubber, Three Pt), John Deere 820 (Diesel), John Deere 730 (Gas, NF, Fenders), John Deere 730 (Gas, WF, 3 Pt), John Deere 720 (Gas, WF, 3 Pt), John Deere 620 (WF, 3 Pt. Good Rubber, John Deere 520 (Restored, 3Pt), John Deere 70 (Power Steering), John Deere 60 (New Rubber), John Deere 50 (Good Rubber, Stuck); John Deere 40 Crawlder, Two Three Bottom Plows (Mounted), John Deere Pull Type Disk Plow. Other Antique Tractors: John Deere 4020 Gas (Older Restoration, Out of Estate), John Deere 4010 Diesel (Syncro, Nice Original), John Deere 630 (Restored, As Nice As You Can Find), John Deere MT (Restored, with One Bottom Plow), John Deere 70 (Restored), Allis Chalmers WD (Single Front, Mounted Cultivator), Minneapolis Moline R (Good Rubber, Older Restoration), Minneapolis Moline U (Runs).Jack Ruiter Retirement: John Deere 4450 (MFWD, 4217 hours, Duals, Quick Hitch, 2 Owner), John Deere 7200 Planter (12 row, 30"), John Deere 7000 Planter (6 row, 30"), John Deere 9500 Combine (4383 Engine 3099 Separator Hours, Duals, New Rubber, Very Nice), John Deere 643 Corn Head, John Deere 925 Platform, Zierkes Head Cart, 400 Grain Cart, '75 Chevrolet C65 (350 Motor, Tag Axles, 18' Box).Tractors, Skidloader, Backhoe, Forklifts, Attachments: '78 John Deere 4440 (8550 hours, QR), Case 870 (WF, No Cab, 7053 hours), White 2-135 (8299 Hours, Duals), Massey Ferguson 231 (2099 hours, Very Nice), Case 530 Construction King Backhoe, IH 5612 Forklift, Pettibone Three Stage Forklift, Brown Pull Type Box Scraper (12'), Schweiss 8' Snowblower, Loftness 8' Snowblower, Gnuse 8' Bucket, George White 8' Snowblower, Vermeer PT-12 Trencher Attachment.Tillage, Planting, Spraying, and Fertilizer Equipment: John Deere 512 Disk Ripper (12'6"), John Deere 2700 Disk Ripper (7 Shank), M and W Ripper (7 Shank), Brent Disk, Minneapolis Moline Disk (18'), John Deere 2800 Plow, International 9 Bottom On Land Plow, John Deere 145H Plow (4 bottom), John Deere 1350-1450 Plow (5 Bottom, Restored), Two Bottom Plow (Three Point), Massey Ferguson 820 Disk (28'), IH 470 Disk (16'), John Deere 230 Disk (21', 24'), John Deere 610 Chisel Plow (17'), John Deere 1600 Chisel Plow (24'), Wilrich Chisel Plow (10', Pull Type), Stanhoist Chisel Plow (10'), Stanhoist 1550 Disk Chisel (12'), John Deere 1100 Field Cultivator (24'), Wil-Rich Field Cultivator, Case IH 955 Planter (12 row, 30", Trash Whippers), IH 800 Planter (8 Row), John Deere Van Brunt Drill (10'), Minneapolis Moline Drill (12'), Two Box Seed Tender, IH 153 Cultivator (12 Row), IH 133 Cultivator (8 Row), Noble Cultivator (12 Row), Fast 7000 Sprayer, Pull Type Fenceline Sprayer, Anhydrous 13 and 9 Shank Applicators, Yetter 3421 Rotary Hoe, Hiniker 1000 Bar W/ Flexi-Coil Tank, Anhydrous Tanks on Gears, Case IH 4520 Titan Floater (3982 Hours, 810 Flex Air, Trimble CFX-750).Hay Equipment, Cutters, Livestock Equipment: John Deere 1209 Mower Conditioner, International Draw Bar Sickle Mower, John Deere No. 8 Sickle Mower (Restored), John Deere 410 Round Baler, Two Racks on JD Gear, New Hayrack Tops, Vermeer Hay Rake (V Rake), Rino TW284 Three Point Mower, New Holland 114 Hay Cutter, MC Stalk Chopper (8 Row), Loftness Stalk Chopper (8 row), Balzer Stalk Chopper (8 Row), Hiniker AR-2000 Stalk Chopper (8 Row), John Deere 27 Stalk Chopper, MC 9E Flail Chopper, John Deere 68 Auger Wagon, Better-Bilt 2500 Tank, Artsway 425-A Grinder Mixer, Gehl 7286 Feedwagon, NH 770R2 Chopper Head, Farmhand 300 Stacker.Combines, Heads: '88 John Deere 7720 Titan II (4700 hours, 650 hours on engine, new concave and hydrostat pump), 80 John Deere 7720 (3000 hours), John Deere 7720 Titan II (4693 hours), John Deere 6620 Combine (As Nice As You Will Find, Lots of New!), Gleaner M2 Combine (4109 hours), 708 Uni Harvester Combine Unit (13' bean platform), Gleaner Six Row Corn Head, John Deere 893 Corn Head, John Deere 643 Corn Head (Poly), John Deere 630 F Hydraflex Head, John Deere 925F, John Deere 930, John Deere 920, New Holland 973 Platform.Wagons, Grain Handling: Two Brent 640 Wagons, Brent 544 Wagon (Tarp, Fenders, Lights), Two 5500 Parker Wagons, Six Parker 4000 Wagons, Three Parker 2600 (J and M Gears), Parker 2600 (JD Gear), Three Parker 2500 Wagons, Parker 200 bu (Westendorf Gear), Kilbros Wagon (JD Gear, Seed Auger), DMI Wagon, Two EZ Flow Wagons on EZ Trail Gears, Dakon Wagon on John Deere Gear, Lindsay Barge Box (JD Gear), Flare Box on John Deere Gear, Par Kan Weigh Wagon, Metal Flare Box Wagon on Steel Wheel Running Gear, Parker 514 Series II Grain Cart, Lindsay Big 12 Grain Cart, Brandt 13110 HP Auger with Swing Hopper, Westfield MK 130-81 Drive Over Hopper, Westfield 171 Auger w/ Swinging Hopper (10"), Brandt Grain Deck Drive Over Belt Hopper (Gas Motor), Hutchinson Auger (12" x 60', newer bearings/chain), Hutchinson (10"x60'), Many Other 8 and 10 Inch Augers, Neco Utrough (10" x 27'), Minneapolis Moline 1210 Sheller.Semi, Pickups, Trailers, Camper, Boat, Vehicles, Lawnmowers, and Other: 11 Dodge Caravan Stow & Go (210,000miles), 07 Chrysler PT Cruiser (129,000 miles),04 Chevrolet Silverado LT C71 ( 178,000miles, good condition),'03 Volvo (500 HP, 13 Speed, 230" Wheel Base), '02 Freightliner Cascadia (N14 Cummins), '96 International 9200 (M11 Cummins, 593,000 miles, 10 Speed Eaton), '06 Chevrolet 7500 (8.1 Gas, 83,000 miles, Flatbed), '94 Ford F250 (7.3L turbo diesel, flatbed, need miles), 94 Ford F150 (4wd, 92,338 miles, has topper),'77 GMC 6500 (Omaha Steel Box), '76 GMC C65 (56k miles, 18' Omaha Box, 366 Gas), '89 Chevrolet 3500 (12' Flatbed, Dually), '77 Ford F150 (4x4, 351, Rebuilt Motor and Transmission), '19 Pacesetter Livestock Trailer (16', Bumper Hitch), '07 Neville Fertilizer Trailer. '00 Mauer Fertilizer Trailer,'03 Trailmobile Van Trailers, '99 Wilson DWH 400, '00 Cornhusker Grain Trailer, '99 Four Star Step Deck (53', Triple Axle), Swather Trailer, '04 Savoy by Holiday Rambler Camper (Fifth Wheel, Slide Out, Bunkhouse), '00 Ford Taurus, '77 Mercury Cougar XR7 (Extremely Nice), DM 30' Head Trailer, Electric Gear Head Trailer, Fuel Tank on Gear, Starcraft Boat on Trailer, More