THE STEVE WAINSCOTT WOODWORKING & TOOL ESTATE AUCTION!

SAWSTOP TABLE SAW - WOLFCRAFT ROUTER TABLES - JOINTERS - DELTA PLANER - PRONTO M41 MOTORIZED CHAIR - POWER & HAND TOOLS - HARDWARE - OUTDOOR & MORE!

Bid now through Tuesday, July 5, 2022! Lots begin ending at 6:00 pm!
Pickup at 315 Golden Dr. S., Topeka, IN 46571 on July 6, 2022 - loadout will be in the afternoon, by appointment only!

ONLILNE BIDDING AVAILABLE AT: WWW.BIDMETZGER.COM

ONLINE CATALOG: LOT #S & DESCRIPTIONS!
2 Pronto M41 Motorized Chair with battery and Hot charger
3 SawStop Professional 3.0 hp Table Saw - model PCS 31230
3a Performax Air Filtration system model 240–3783, with remote and manual 10” x 20” x 17”
4 Delta 12.5x6 Planer Model 22-560
4a Performax air filtration system model 240–3783, with remote 10x17x20
5 Master Force 13” planer w/ stand - Model 240-0045
6 Delta 6” variable speed bench jointer (Model # 37-070)on tool table stand
7 Wolfcraft router table 660 w/ porter cable 690 series 1-3/4” peak HP router Model 1001
8 Wolfcraft router table 660 w/ porter cable router Model 1001-T2
9 Delta Shopmaster One H.P. Single-Stage dust collector - duct work included - Model AP 400
11 Hitachi Slide Compound Miter Saw model C 12RSH  w/ saw cabinet -  Cabinet will need to be disassembled & removed by buyer
12 (3) 10” Saw Blades (one new in package)
12a (2) 10” Saw Blades
13 Floor Mats
14 Shop Vac QSP Pro Wet/Dry Vac 6.0 Peak HP (Model QPL60)
15 Sears/Craftsman Motorized 15” floor model drill press (Model 113.213151)
16 28” Padded Stool
17 (2) Adjustable Material Rollers 13” width
18 Dual Work Light on adjustable stand
19 Rockler Precision Forstner Bits with case
20 Extension Cord Reel and Power Cords
21 Black & Decker Workmate 200 Work Bench
22 Sears/Craftsman 12” Wood Lathe 1 HP (cabinet not included) model 113.228360
23 Buffalo Lathe Tools
24 8 pc Tool Shop Router Bit Set
25 Assorted Router Bits with wooden box
26 PerformaX Bench Vice 5”
27 Shop Vac Air Cleaner (Model AC235A)
28 Cal-Hawk 5-Speed Drill Press - Model 240-2020 - Drill only
29 Delta 9” Bench Band Saw (Model 28-150)
30 Square, Speed Square, Mitering Guage, Router Depth Guage, Rockler Plastic Corner Guides, misc
31 Speedbor  Spade Bit Set, Spade bits, Drill bits, Allen wrenches
32 Mayes Brothers Tool MFG Co. 4 ft T-square
33 (3) 36” Metal Rulers, (2) Levels
34 Porter Cable 12” Dovetail Jig - Model 4210
35 PerformaX 240-2981 Drum Sander 3.5Amp 5/8"
36 Skil Combination 4” Belt/6” Disc Sander (Model 3370-Type 1)
37 WEN Wet Stone (Model 2900)
38 Sears/Craftsman 16” Variable Speed Scroll Saw - Model 113.236150
39 Sears/Craftsman 6” Bench Grinder (Model 319.190622)
40 Quartz Clock Movement Kits, Solid Brass Shoulder Hooks, Door/Drawer Utility Lock, 5” Hook & Loop Discs, Solid Brass Wood Screws, Picture Hangers and Hinges
41 Drawer storage on wheels 90x27x24.5 with trim & wood assortment
42 End Table 28x22x19.5
43 3 pcs of Snap Stone Flooring Porcelain Tile 23.5x6
44 Plastic Tool Box with contents
45 Multi Use Step ‘N Stop Step Stool and Storage Box
46 Craftsman Roll Around Work Seat 16” with underneath Tray
47 Two 2”x4”x8’ dowl rods, shelving, misc. wood
48 Wood Frame Assortment
49 Diamond Tread Aluminium Corners in various lengths
50 Logan Artist Elite Mat Cutter 45”
50a Snap stone 12”x12” porcelain tile - 27 tiles total
50b (15) Nafco luxury vinyl tile squares 16”x16”
51 Porter Cable 2-Speed Cordless Driver/Drill and Charger (Model 874)
52 Westhouse 26” TV with Remote
53 14” Metal Corner Guide mounted on wood
54 Senco - Nails and Staple assortment
55 Contents of shelf (shelf not included)
56 Shelving 48x84x18.5 (contents not included)
57 Shelving 48x84x18.5 (contents not included)
58 Contents of shelving (clamps & shelving not included)
59 Wood assortment
60 Metal Organizer and contents 12x13.5x6.5
61 Rolling Organizer with contents 27x53x12
62 Plastic Wall Organizer w/ content 15x18x6.5
63 Rubber Mallet, Sledge Hammer, Ball Peen Hammer and Wooden Mallet
64 (3) Claw Hammers
65 SMV Magvac Magnetic Broom
66 Metal Square,  adjustable square and level combos
67 Wood assortment
68 Roll and partial roll of 24” Bubble Wrap
69 Large Box of Weather Stripping
70 Power-Limited Circuit Cable on wooden spool - For use in accordance with NEC Article 725, Class 2 or Class 3 Circuits
71 12/2 Romex Wire 600v Non-metallic sheated cable with ground on wooden spool
72 14-2 Romex Wire on Wooden Spool - 600v max.
73 Staple Gun and Staples, Stanley Precision Screw Drivers in case and Allen wrenches, Scrapers
74 Sears/Craftsman Industrial Saber Saw 4.5 amp Model # 900.272510
75 Sears/Craftsman 3/8” Electronic Variable Speed/Reversible Drill (Model # 315.10300)
76 Sears/Craftsman Router Model # 315.17480
77 MultiPro Cordless Dremel 7.2v Model 770 Type 1 w/ attachments and case
78 Sears/Craftsman 3”x 21” 1 HP Belt Sander (Model 315.117130)
79 SD 608 Freud Dial-a-Width Dado 8” Diameter 24 Teeth in case
80 Skil 3/8” Drill (Model 217)
81 Sears/Craftsman Biskit System Plate/Edge Joiner Kit
82 Kreg Jig Model K2000 mounted on board
83 Rockwell Sonicrafter X2 Oscillating tool and attachments with case
84 Urban Gorilla Tools 16” Lazer Level Rotating Leveling Base Tripod in case (Model 16-LLKWTM)
85 Roto Zip Roto Saw with bits and carry case (Model SS560VSC)
86 Porter Cable 7 1/4” Heavy Duty Circular Saw (Model # 743)
87 Craftsman Commercial Router Double Insulated 100% Ball Bearing 25000 RPM (Model #315.17380)
88 Hitachi DH24F3 15/16” Rotary hammer drill in case
89 Wire Spool Rack 19.5x18.5x20
90 Drawer slide guides
91 Work table w/ slide out tool organizer 39x69x33 - content not included
92 Saw  stop 8 inch Dado cartridge Part number TSD – 8R2
93 3-in-1 Helping hands Magnifier with two adjustable alligator clips
94 Duracraft impact driver number 2500 in case with two bits
95 Porter Cable model 343 5" random orbit sander
96 Porter Cable model 382 random orbit palm sander w/ dust collector bag
97 Black & Decker professional model 4011 palm grip sander w/ dust collector bag
98 Porter Cable model 380 palm grip sander with dust collector bag
99 Black & Decker professional Palm grip sander model 4011
100 Black & Decker cordless drill w/ 2 batteries and charger 18v
101 Drill driver bit set in case - missing a few bits
102 7 piece Forstner bit set in carrying case
103 Irwin tap and die set in carrying case
104 Ryobi DS 1000 detail sander w/ paint & varnish remover pads, extra sanding pads
105 Block plane, Dremel tool kit, sanding drums
106 Senco Finish pro 10 Brad nailer air-powered
107 Craftsman brad nailer air-powered
108 Craftsman quarter inch crown stapler air-powered
109 Omer mitre mite air gun  53.4wr
110 Senco SJS air powered stapler
111 Four corner clamps
112 Craftsman 90° angle drill head
113 Propane torch, flaring tool kit, rask, knives, miscellaneous
114 Two 7.5" levels, half-inch break over bar, nail bar, misc. tools, studfinders, chisels and punches
115 Tool kit in metal carrying case by Tool Shop
116 Royal electric pencil sharpener, partial box of #2 pencils, misc. tools
117 Hole saw cutters 5” & assorted sizes, Peerless articulating arm bracket
118 Knife assortment, Irwin laser guide in case, misc.
119 Shop vac paper filters, sanding discs, hardware assortment, trash can
120 Weller 8200 soldering iron in case, small space soldering gun with solder and paste
121 Metal organizer and contents 6.5x10x8
122 White panhead screws, wood screw assortment, Mitre-Mite tab points, misc. staples and nails
132 Vise grip clamps, squeeze clamps, small bar clamps
133 Sure flow 12v pump with in-line filter in box
134 Handsaw, hacksaw, 5-gallon bucket tool organizer, flexible flashlight, two 10" plastic wheels in bucket
135 3 totes - no lids
136 Six Irwin quick grip bar clamps 6.5"
137 Six Irwin quick grip bar clamps 6.5"
138 Six Irwin quick grip bar clamps 6.5"
139 Four Irwin quick grip bar clamps 6.5"
140 Six Irwin quick grip bar clamps 6.5"
141 Four Irwin quick grip bar clamps 6.5"
142 Four Irwin quick grip bar clamps 6.5"
143 Six Irwin quick grip bar clamps 6.5"
144 Four Irwin quick grip bar clamps 6.5"
145 Five Irwin quick grip bar clamps 6.5”
146 Two Craftsman bar clamps 24"
147 Three Irwin quick grip bar clamps 6"
148 Two quick grip bar clamp/spreader 36”
149 Three Irwin Quick grip bar clamps, (2) 18”, (1) 12”
150 Four 2 ft. pipe clamps
151 Three 2 ft. pipe clamps
152 Clamp assortment, squeeze clamps, C-clamps
153 Arrow hammer stapler, oil filter wrench, angler 90 drill chuck
154 6" sanding discs, assorted spring, hooks, #10 biscuits, misc. hardware, plastic face shield
155 Toggle clamps, latches, snaps, hinges, clamp
156 Saw blades, 6" sanding discs, thermostat, miscellaneous blades
157 Air hose assortment
158 2 pair plastic saw horses
160 Blue Ox Kargard  Deflector model BX8870 - new in box
161 Reese hitch insert 4" drop with 2" ball
162 Three-way Reese hitch insert, 1 7/8”, 2”, 2 5/16”  balls
164 Reese hitch insert 5 1/4 inch drop with 1 7/8”  ball
165 Blue ox patriot braking system and towing unit with carrying case, wires, safety cables
166 Rubber hanging mudflap for pulling campers w/ metal marine Semper Fi Logo 8’x 13” and chains
167 King  Tailgater dish network receiver and stand in carrying cases w/ manual
168 Folding patio chair with cloth seat
169 Folding rocking patio chair with padded seat
170 Splitting mall, brooms, extendable handle, dust pans
171 Stihl FS44 Weedeater gas-powered
172 Four 14x14 camper jack pads, folding stepstool
173 Black & Decker cordless weedeater, cordless hedge trimmer, extra batteries and charger
174 Metal shelf & contents - 17.5x36x72, assorted paint stains & sprays, flexible grout, contents in containers unknown - mostly partials, 17.5x36x72
175 Elements RV cover scaled to fit trailers up to 104" wide and 132" tall, 34’1” to 37 ft long, with carrying case and patches

AUCTION TERMS:

Valid Credit Card required for bidding approval. All bidding is in US Dollars (USD). Cash, Visa, Master Card, Discover, American Express, Wire Transfer ($25 fee added to each Wire). $5 MINIMUM if you would like to pay with a Card. Any invoices paid with a card that are less than $5 will be rounded up to meet the minimum requirement. Statements made sale day take precedence over all other printed materials. Your credit card on file will not automatically be charged following the auction. You may pay with cash, check or card (4% convenience fee for any type of card) when you pick your winnings up at our specified time and location for the auction listed above. IF YOU DO NOT COME TO THE LOAD OUT TIME LISTED ABOVE, YOUR CARD ON FILE WILL BE CHARGED FOR YOUR PURCHASE TOTAL PLUS THE 4% CONVENIENCE FEE. There will be a $5 DECLINED CARD FEE added if the card on file must be charged and declines.

Items not picked up during the scheduled load-out times will be charged a $10 convenience fee (per invoice) for delayed pickup.

If you do not come to the load out time/day listed, your card on file will be charged for your purchase total plus the 4% convenience fee. 

NO REFUNDS WILL BE ISSUED FOLLOWING BEING CHARGED!! IF YOU DO NOT WANT YOUR ITEMS PAID FOR BY CARD YOU WILL NEED TO COME TO THE SPECIFIC PICKUP TIMES FOR THIS AUCTION.

If your purchase must be hauled by Metzgers, there will be a minimum of a $20 service fee added to your invoice.

Buyer is required to bring their own packaging, help to load and/or equipment for loading.

Items not paid for after 10 days will be resold.

Items not picked up within 10 days will be resold at new owners expense, even if paid for.

Pickup will be in the afternoon on July 6, 2022 by appointment only! Your invoice will be emailed to you when the auction closes and will have pickup information and exact times attached! Book a pickup time slot via the link in your winning email!

** If you do not receive an email please check your junk mail! If you are unable to do so call the Office to schedule your appointment! 260-982-0238.

Shipping is available on small lots. Buyer is responsible for paying for items in full prior to being allowed to pick-up or have items shipped. Shipping costs include cost of shipping plus a $10 minimum S&H fee . Buyer is Responsible for all Shipping/Handling Charges incurred including fees charged by delivery service for incorrect addresses. For out of state buyers with an invoice total of $500.00 or greater, we may ask that funds be in a certified form with either a Certified Check, Money Order or Wire Transfer ($25 fee added to each Wire).   We will email you if need to pay in this manner when we send your invoice.