THIS IS A COMPLETED SALE
View current listings by this company
View current listings by this company
Richardson Blacksmith & Metalworking Shop
Listing ID#: 506020
Sale Location |
---|
Merrill, WI 54452 |
Sale Dates and Times |
---|
Bidding Starts: Friday May 27, 5:00 PM Bidding Ends: Sunday Jun 5, 7:00 PM |
Sale Type |
---|
![]() |
Company Information |
---|
Bennett Auction Service Contact: Adam Kielsmeier Phone: 715-657-0078 Email: adam@bennettauctionservice.com Website: adam@bennettauctionservice.com EstateSale.com ID#: 13757 View company information and listings |
Free Email Notifications
Sign up for the EstateSale.com email notifications and we will let you know about sales in your area! You may set up alerts by area (zip and radius), keywords, and by company. It is FREE and only takes a few seconds to sign up.
Listing Terms and Conditions |
---|
See Terms of Sale in auction catalog.
|
Listing Video |
---|
Listing Information |
---|
1
Craftsman Model 150 heavy duty floor drill press is cast iron and steel. 4 speed, runs well.
2
12" disc sander has a handy momentary foot pedal switch and runs well.
3
Industrial duty Dayton 8" bench grinder has a 3/4 hp 120/240 volt motor and dust collection ports. Runs smoothly and comes with several custom grinding jigs in the quench pot. Heavy cast iron and steel stand has drilled feet for anchors. Stands approx. 45".
4
Masterfully built custom coal forge is 20" diameter and stands over 6' without stove pipe. Heavy steel base is lined with poured refractory and comes with three refractory air vent fire pot discs. Standard work piece opening is 7" x 10", but side panel removes for through-work. Champion hand crank forge blower turns smoothly and moves air well. Auxiliary electric blower is set up with a momentary foot switch. Adjustable work rest folds down when not in use. I commend Vic for this excellent design and construction. Bring tools, carts, and all your friends to move. Alternate pickup day available as long as payment is in on time.
5
Antique WQD Wilkinson Queen's Dudley blacksmith anvil with stand and tool rack. English anvil is 21" horn to heel with a 12-1/2" x 4", 1" hardy hole and 1/2" round hole, stone weight is 1-0-15. Applied, hardened face is overall good and anvil rings nicely. Will ship with or without stand.
6
Heavy duty quench tank or water pot is 3/8" thick and stands 18" high. Water included free of charge.
7
This machine cleans the rust, pitch and junk off circular saw blades. 7" flap wheel is mounted on a spring loaded swing arm. Saw arbor has a reduced speed rotisserie drive. Accommodates blades up to 24" diameter. Runs well.
8
Belt grinder or sander is of all-steel construction and takes 1"x40-something belts. Cast iron table is 7" x 9". Runs well.
9
Floor standing hydraulic press is approx. 5-1/2' high x 3' wide. Opening adjusts up to 2-1/2'. Ram extends and retracts. Nice machine.
10
Vintage hospital staff locker is better built than any others we've encountered. Frame and door are double walled. 6-1/2' high x 1-1/2' wide x nearly 2' deep. Quality steel furniture piece.
11
Vintage hospital staff locker is better built than any others we've encountered. Frame and door are double walled. 6-1/2' high x 1-1/2' wide x nearly 2' deep. Quality steel furniture piece.
12
Vintage hospital staff locker is better built than any others we've encountered. Frame and door are double walled. 6-1/2' high x 1-1/2' wide x nearly 2' deep. Quality steel furniture piece.
13
Please come later in the day to pick up this drawer storage unit so we can have it empty for you. Approx. 4' x 2' x 4-1/2' high and believed to be in top and bottom sections.
14
Metal rolling cart with many organizing trays filled with nails, nuts, and bolts. Longest nail is 4". Rolling cart is 32" x 21" x 40" tall overall.
15
Custom made portable sheet metal break takes sheets up to 39". Stands 3' high and is ready to work.
16
Steel roller cabinet is 20" x 16" x 38" tall.
17
Dual torch oxygen acetylene rig on a very nice torch cart. Harris and Reg-O-Lator regulators & gauges feed two sets of hoses each individually coiled. Comes with NCG torch handle, mixer and Rego tip. Other hose set is ready for connection. Heavy duty cart has motorcycle wheels and will roll over anything. Tanks are leased and are not included.
18
Generac portable generator Model 6331-1 is rated 2250 watts at 115 volts, 20 amps. Gas tank is dry for storage, engine turns over with good compression.
19
1 hp metal cut-off saw has a swiveling fence and runs well. Stands approx. 5'. Comes with face shield and three abrasive blades. This thing is a beast.
20
Custom made bar twister and roller for ornamental ironwork such as fencing, gates, architectural hardware. Well built machine works great.
21
Craftsman lockable two piece metal tool box with casters. Top cabinet has two drawers and measures 26" x 10" x 11" tall. Cabinet comes with odds and ends. Bottom cabinet measures 26-1/2" x 18" x 29" tall. Keys included for top box.
22
Craftsman 12" Band Saw with 1-1/8HP motor, tilt head, fence, and mounted wheels for easier transport. Comes with four blades. Runs smoothly. See lot 233 for a variety of extra blades.
23
Well built cast iron 4" wood jointer is approx. 2' long and comes on an all-steel rolling cart. Runs.
24
Craftsman commercial metal cutting horizontal band saw mounted on metal rolling cart. Runs smoothly and quietly. Comes with hydraulic gravity feed. Saw measures approx.. 36" x 15" x 36" tall.
25
Water V Liet Tool Co. 9000 lb mechanic's jack has a 30" frame and 4' handle. Raises and lowers.
26
Sturdy work bench has a solid steel frame and a 3" thick oak top. 6' x 1-1/2' x 32" high. Bring wrenches to unbolt Lot 378, if you get here before that buyer.
27
Vic Richardson made this anvil and stand in 1999. Anvil is 16" horn to heel and has a 1/2" hole. Currently stands 38".
28
Lincoln PowerMig 255 wire welder with helmet, hammer, manual and extra spool, plus some extras in the cabinet. Welder was in service until we removed Lot 329 - spool of wire. Gas tank is leased and is not included.
29
Foley Belsaw Planer-Molder takes stock up to 12-3/8" wide, 6-1/4" thick. 5 hp, 220 volt. Runs. Comes with owner's manual.
30
Huge floor mounted swiveling vise has 6" jaws and a 17" handle. Vise measures 27" long, 12" tall, opens and closes smoothly. Please bring wrenches, cart, and plenty of help.
31
All steel fabricator's bench or table is 10' x 3' x 31" high. Well built and very sturdy. Please come around 5:30 on pickup day so we can have this emptied for you. Alternate pickup day available as long as payment is in on schedule.
32
Adorable 6 lb cast iron craft anvil stands about 3' tall. Anvil measures 8-1/2" x 2" x 4" tall.
33
Black & Decker Workmate 400 folding portable work stand is about 30" wide.
34
JET 6-speed wood lathe with dust collector chute. Runs. Max RPM 3,975. 1/2 hp motor, lathe is Model No. JML-1014. Attachments include live center, Jacobs drill chuck, 6" and 4" tool rests, steady rest, calipers, dead center, more. Comes mounted on a 32" x 17" x 30" tall cabinet with wheels for easy movement around the shop. Lathe as pictured is 12" between centers, but will extend to 38" between centers with included bed extension. Large chromed chuck key was removed from lot as it belongs elsewhere.
35
Rolling blacksmith hammer rack is approx 2' x 2' x 3'.
36
Delta 10" compound miter saw with carbide tipped blade and dust bag. Runs.
820
Generac 5000 Power Plus portable generator. Comes with Briggs and Stratton Genpower 10.0 HP motor, metal rolling cart, and 50' extension cord. Seller states it runs and works. Generator has automatic low oil sensor, 6250 surge watts, twist lock AC outlets, low tone muffler, 5 gallon fuel tank, circuit breaker protected, and full wrap protective cradle.
37
Drill press is light enough to be portable and heavy enough to do real work. 2-1/2' column and opens to 16" between chuck and base.
38
Charming wooden bench is 6' long.
39
Sturdy rolling work bench has a hardwood bowling alley floor top. Measures 6' x 18" x 32" high. Comes with 6" vise and clamp-on work light.
40
Reciprocating power file is on an 18" base and works well.
41
9 lb. cast iron anvil on a custom floor stand is 9" horn to heel and has a 1-4" hardy hole.
42
Four speed Homecraft wood lathe comes with heavy duty stand, drive center, live center, face plates up to 6", 12" work rest, Jacobs drill chuck, and a nice assortment of turning tools.
43
Gear reduction metal shear has an adjustable work stop, 4" blades and mounts to the floor for serious work. Please bring wrenches to unbolt.
44
The air compressor all other compressors call 'Sir!'. Heavy duty cast iron two stage compressor head is powered by a 2 hp 115/230 volt GE motor and feeds a huge 4' x 20" diameter pressure tank. Tank gauge reads to 300 psi, regulator gauge to 160 psi. Comes with a generous length of industrial quality air hose. Please consider a guard for the belts. Compressor runs well and is in use as we prep the sale.
45
Custom made power hammer or air hammer has ball bearing hammer guides and a 32" air cylinder barrel. Vic ran the hammer for us and it's quite impressive. Machine stands over 6' high and is built heavy, please bring carts, tools, and all your friends to load. Alternate pickup day is available as long as payment is in on schedule.
46
Start a side hustle sharpening lawn mower blades with this custom built machine. Adjustable bevel jig feeds an 8" abrasive wheel. Front mounted blade balancer helps you to get it right. 6" buffing wheel gives you a razor edge. Machine stands about 44" tall and runs well.
47
Foley Model 314 ball bearing grinder sharpens circular saw blades up to 4' diameter. Comes with a diamond wheel and an abrasive wheel mounted. Plus a cabinet full of saw blades. Runs and works well.
796
Craftsman bench top metal lathe is around 18" between centers and is 33" overall. Comes with manual, 3 jaw and 4 jaw chucks, tool post, tool post grinder, assorted tool holders, 5" face plate, assorted centers, drills, and drill chucks. Also includes magnifier, surface plate scribe base, additional tool post, handful of gears - presumably for cutting different thread pitches, drawer organizer with a bunch of goodies. Everything is mounted on a 5' x 2' bench which includes a corner vise.
48
Foley Belsaw Model 1055 Sharp-All saw & tool sharpening machine. Runs well and comes with steel floor stand, adjustable saw arm with tooth setter, drill bit sharpener, tilting work table, rotary table, extra abrasive wheels, jigs, and manual.
49
Most everything you need for rebuilding hydraulic jacks including manuals and parts lists, instructional book, springs, seals, check balls, end-cutting burrs, spanner wrenches, O-rings, and more.
50
Goodell Tool Co. circular glass cutter is adjustable to 13" diameter. Rolling counter is 10" long.
51
Gil-Bilt tracking adjustment for a belt sander is 9" x 9".
52
Antique barn framer's wood auger is 1-1/4" diameter and 19" long.
53
Cast iron framed speed increaser for spooling or similar, 4-1/2" x 4-1/2".
54
Hibbard broad hatchet has a 5" x 4" head and a tight 14" handle.
55
Ship builder's or barn raising auger is an uncommonly impressive 3-1/2" diameter x 17". Marked No. 14 R. Barton, Rochester and SHAFF.
56
One man cross cut saw with assist handle is 4-1/2' long. Handle has Warranted Superior medallion and is nicer than most with all rivets intact.
57
Antique Ideal Mfg. Co. shot shell press rolls the lip of a paper hull, patented Jan. 1 and Aug. 18, 1896.
58
Superior Cast Steel No. 8 log cabin peg auger, 2" x 19".
59
Antique hand crank bench grinder still works and is 7" tall.
60
Square 1925 Wisconsin trap tag; No. 1 Oneida Victor ATC animal trap with nice legible pan, plus three similar.
61
Old farmstead or fencing hatchet with nail hook has a 15" handle.
62
Brown & Sharpe standard brass gauge samples made by Manhattan Brass Co., New York. 5".
63
Craftsman auto scroll saw, adjustable variable speed, quick release base and swiveling spindle. Nice tool. Runs.
64
Primitive concave radius block plane is 10" and has a faintly marked iron.
65
1" Rabbeting plane by Ohio Tool Co.; 5/8" radius molding plane by Ohio Tool Co.; Hand made triple bead molding plane.
66
DeWalt Model DW682 plate joiner with wood biscuits, instructions, more. Runs.
67
Taintor's Positive No. 7 squeeze style saw tooth set patent 1891-1907; two other cast iron saw tooth sets by Stanley and other. Adjustable saw gauge, tooth height file, more.
68
Antique hand forged draw knife is 18" with a 9" blade; Factory draw knife is 14" with an 8" blade and has original handles and hardware.
69
Nickel drop slot is 7" long. Slide works. Mechanism has a slug magnet for rejecting counterfeits.
70
Cast bronze Kearney cable clamp is 4-1/2" as pictured.
71
T.H. Witherby No. 10 Razor Temper draw knife with original handles and hardware, 17" overall. Large 20" draw knife has a 14" blade; original handles and hardware are tight.
72
Stop & Go draw knife is 16" with an 8" blade, original handles and hardware. Early style No. 30 straight draw knife has a 9-1/2" blade and is 17" overall with tight handles and original hardware.
73
Craftsman 1-1/4 hp 4" x 21" belt sander with dust collector bag. Runs.
74
Straight and curved draw knives. Each around 14".
75
Ryobi WC400 angle grinder with a Ryobi chainsaw-style carving disc, runs; Black & Decker palm sander, runs.
76
Tool Collectors, check out this rack and gear style adjustable mechanic's wrench, 10" long; plus 7" flat iron, 5" cast iron C-clamp by E.C. Stearns Syracuse, New York; early style sheep or wool shears, 13".
77
Chicago Pneumatic 1/2" drive adjustable torque impact wrench.
78
Ingersoll Rand 1/2" drive impact wrench.
79
Stanley miniature hand plane is 3-1/2"; Craftsman hand plane is 3-3/4"; Toko cabinet scraper is 4"; interesting light duty plane is 4" and takes double edged razor blades.
80
I think these shoot brads for picture frame backs or perhaps glazing points for windows. Approx. 6" long, one functions, one needs work.
81
DeWalt variable speed reversible drill, plus an older drill motor. Both run.
82
Air tools including Aro die grinder with carbide cone burr, air drill with Jacobs chuck, cut off wheel set up.
83
General No. 809 adjustable sharpening jig for use with abrasive paper. Two Stanley plane irons, approx. 7". Millers Falls No. 381-3-1/2 curved scraper. Other scraper and chisel.
84
Never have a dull tool again. Natural and synthetic sharpening stones up to 8".
85
Antique coat hooks up to 7"; plus some newer hooks.
86
Craftsman and other wood chisels up to 1".
87
Assorted hardware including dresser pulls, screen door handle and latch, faucet handles, switch plate, hood latches, more.
88
Two Sealector adjustable heat sealing irons, each 12".
89
3" twist lock and other grinding and polishing wheels, plus arbors for same and other handy stuff.
90
Sargent and other antique door hardware, old and newer drawer pulls, glass door knobs, enameled door knobs, more.
91
Sanding belts including 3" x 21", 4"x 24", 1" x 42", plus 8" adhesive sanding disc.
92
Two Miller bicycle headlights, one with tire-driven generator. Steering wheel suicide knob, handful of red indicator lamps, more.
93
T-Post fence insulators, plus other fencing components. Some unopened. Box is 16" overall.
94
Craftsman Model 9-4186 multi-size doweling jig is all-metal construction. Similar doweling jig by Arco. Set of dowel centers up to 1/2".
95
Six brake and engine cylinder hones in various states.
96
Wood hobby craft components including finials, beads, plugs, dowels, more.
97
Astro Pneumatic Tool Co Model 78905 composite air sand blaster with original package.
98
Heavy box of brass fittings, valves, etc. Box is 14".
99
Air chuck with 220 psi gauge; Devilbiss regulator assembly is 17".
100
H. D. Smith & Co. mechanic's wrench is 15" and retains original wooden handle slabs.
101
Thor air hammer with six assorted bits.
102
Thumler's rock polisher tumbler Model AR2 with two drums and some supplies.
103
Sargent No. 722 jointer plane is 22" long. Ribbed casting looks good. Front handle is sound, rear handle is chipped at tip. Nice plane.
104
Hickory Greenlee draw knife with figured red oak handles and copper hardware measures 15" with a 9" blade.
105
Stanley No. 80M steep angle draw shave or cabinet scraper. Casting is good with slight mushrooming at throat. 11" overall.
106
James Swan Co. No. 10 draw knife is 16" with a 10" blade. Original handles and hardware with some old repairs.
107
Hand forged wrought iron fire poker is 25" long. Nice example of Vic's blacksmith work.
108
Sargent No. 306 low angle hand plane with adjustable throat is 6-1/2".
109
Stanley push or pull swivel head hand plane is 13".
110
Delightfully unique cast monkey hanger is nearly 1' long.
111
Winchester bullet mold for .32-40 is in very nice condition with original handles and hardware and good hinges. Approx. 10".
112
Winchester No. 3250 straight draw shave is 10". Body is in good condition with no chips or cracks and retains most of its original finish. Nice uncommon piece.
113
Old buck saw is 3' at widest and retains original hardware.
114
Stanley No. 80 steep angle draw shave or cabinet scraper is 11" wide. Body is in good condition with no chips, cracks or repairs. Nice piece.
115
Palmer Brothers of Meadville, PA made this No. 10 draw knife with adjustable handles. 10" straight blade is in good condition with no chips. Knife retains original hardware and handles and is 18" in pictured position.
116
AGM Model 3016 single mantle white gas lantern by American Gas Machine Co. is fitted with a Coleman Pyrex globe. Stands 12" excluding handle.
117
6" single bit axe head shows a forge weld line on inside of handle hole.
118
E.C. Stearns & Co. Syracuse, New York No. 1 saw sharpening vise patented Jan. 31, 1911. Jaws are nearly 11", cam style lock is functional. Old well done repair noted near bottom.
119
Hand forged wooden shingle or shake froe. Head approx. 12" with a tight 14" handle.
120
Pair of Sargent Hercules hand planes. One with a ribbed bottom. 14" long. Both have some chips, but appear complete and functional.
121
Early style lumberjack axe head is 12" x 4". Nice piece.
122
Stanley No. 83 rolling cabinet scraper patent Feb. 4, 1896. Measures 9-1/2" wide.
123
Miniature cast iron framed crank hand drill with 2-jaw chuck is only 8" overall. Functions well.
124
Walworth Stillson miniature 6" pipe wrench needs only a wooden handle to be complete.
125
Miniature cast iron hand plane is only 3-1/2". Iron is marked 'Stanley Rule & Level Co.', possibly a promotional piece.
126
Craftsman adjustable angle drill press or machine vise would also work on a light vertical mill. Cast iron and steel construction with 8" base and 2-1/2" jaws.
127
Stanley No. 180 rabbeting plane with 1-1/2" iron is complete with depth stop. Castings are good with no chips, cracks or repairs. Nice piece.
128
Stanley Bailey No. 7 jointer plane is nearly 2' long. Ribbed casting is in good condition as are the handles. Complete and ready to work.
129
Antique buck saw with original paint, hardware and blade is 36" at widest.
130
Scioto Works No. 15 block plane is 16" long and has an Ohio Tool iron. Nice example complete with original handle strike button and lock wedge. Also Lakeside 15" transitional plane.
131
Antique grub axe head is very eye-catching. Tool shows heavy grain pattern nearly like wood and was presumably in salt water or an acid bog for the better part of a century. Marked, but illegible to us. Approx. 13".
132
Adze head is nearly 10" and is mounted on a 20" hardwood handle.
133
SBS Siegley 7" hand plane looks ready to run. Similar 5" plane is unmarked. Larger 9" hand plane is complete and in good condition reading only '302 Made in USA'.
134
Adze head is 9" long with a 4-1/2" blade and has a 21" hardwood handle.
135
Uncommon tools for use with a carpenter's brace. E.C. Stearns tenon or dowel cutter is 6" long with a range 3/8" to 1". Adjustable rotary cutter made leather gaskets to keep the well pump running and cuts donuts or discs up to 7" diameter.
136
Millers Falls No. 1980 ratcheting reversible hand crank drill was patented June 10, 1913 and is 16" long.
137
Stanley Two Tone Marsh Bedrock hand plane is 9" long. Rear handle is cracked, but tight. Uncommon piece.
138
New York Tool Co. No. 3 block plane is 8-1/2" and sports a Chapin Stephens Co. iron. B.E. or D.E. trademarked transitional plane is 8".
139
Five carpenter's braces by P.S. & W. Co., Pritzlaff, Pexto and others.
140
Thin blade with out-facing edge, 22" long. Wooden handle is 15". Not a froe. Not a corn knife. Anyone confident what this is? Thanks!
141
Hex keys up to 5/8" - Wow!
142
Router lettering templates for sign making.
143
Early river rat pike pole with cant hook is over 5' long and looks great.
144
Craftsman Rout-A-Signer sign making jig for your router is 29". And comes with a carousel of letters and numerals.
145
Antique hay knife has an uncommonly long handle and is approx. 3' long.
146
Antique loose hay knife presents well and is 3' long.
147
Wedgeway branded left hand broad axe marked for 'Morley-Murphy Hardware Co. Green Bay, Wis' has a 12" edge and a 24" handle.
148
Homesteader's broad axe has a 12" edge and a 30" handle.
149
16" box filled with assorted fasteners, screws, nails, more.
150
Twelve drawer organizer is very sturdy and in good condition. Drawers slide easily with roller bearing drawers. Cabinet stands 57" tall and is 29" deep x 13" wide without added wooden tray. Comes with some contents as pictured.
151
Double and single cast iron V-belt pulleys up to 5", plus a triple groove and some other useful stuff.
152
Nice assortment of lock collars, pulleys, sprockets, and similar up to 7" diameter.
153
9" splitting maul head is on a tight 35" hickory handle.
154
No. 12 Lakeside draw knife is 18" overall and has a nice straight 12" blade. Handles and hardware are original and slightly loose. Nice piece.
155
G.I. Mix & Co. No. 1 EX draw knife has a 10" properly curved blade and is nearly 18" overall. Shows correctly done older repair, nice piece.
156
17" draw knife has a 9-1/2" blade. One tang has been riveted, the other shows an old crack. This tool has seen a lot of hard work and I wish it could talk.
157
Large 21" draw knife has a 12" blade with nice belly. Marked 'Bushnell', 'Hushnell' or similar.
158
Martin's, round or radius bottom spoke shave has a cast steel blade and is 10-1/2" overall. Nice example of an uncommon piece.
159
Lakeside No. 10 draw knife has a nice straight 10" blade and is 17" overall. Handles and hardware are tight and correct.
160
Greenlee draw knife has a straight 10" blade and a spine which is nearly 1/4" thick. Handles and hardware are original, tool approx. 16" overall.
161
True Value draw knife is of a unique applied tang design. 8" blade is nice and straight, tool is nearly 14" across tight handles.
162
No. 80 draw knife has been customized for convex dishing or cupping work. Attractive handles have brass hardware. Tool is nearly 15" overall.
163
Hanson Model 600 hanging dairy scale with adjustable tare hand and standard hand or needle.
164
Ornamental ironwork or blacksmith rod twisting tools fit square stock up to 1". Longest tool is 2-1/2'.
165
Bucket of fine coal, partial bag homemade real charcoal; box of fine coal with some junk in it; fire brick; four buckets of black pumice or similar.
166
Catchall pile includes 16" fireplace poker, 6" forged left hand, 4" iron hoop; specialty tools, jigs, fixtures, assorted iron.
167
Eight threading die set with handles takes the frustration out of changing dies. Largest is 1" die in a 28" handle. Smallest is 1/4" die in a 12" handle.
168
Ridgid triple head pipe threading tool is currently set up with 3/8", 1/2", 3/4" dies. 21" long.
169
Beaverette No. 6 ratcheting pipe threading handle houses one die and comes with an extra square die. Approx. 2' long.
170
Box end and other wrenches up to 2" and longest is 2'.
171
Large No. 3 pipe cutter is nearly 2' long extended and looks to take pipe up to 3-1/2" OD.
172
Ridgid Longrip ratcheting pipe reamer is 15".
173
Ridgid No. 1 & 2 pipe cutter is around 1-1/2' long and cuts pipe 1/8" to 2".
174
Ridgid No. 1 & 2 pipe cutter is around 1-1/2' long and cuts pipe 1/8" to 2".
175
Ridgid heavy duty 24" pipe wrench has a straight handle and sharp jaws.
176
Decorative leaf display was cut from sheet iron. Great wall accent. Each piece is approx. 40".
177
17" box of cool wrought iron pieces including water buffalo head, left hand plant hanger, scroll work, bird or angel, more.
178
Larin heavy duty padded creeper adjusts to two positions; flat and rolling bench. Steel frame is approx. 40" x 15".
179
Wrought iron hoops and scroll work up to 14" diameter.
180
Hedberg Super Siren Model 8RLR, 6/12 volt siren came off a 1934 Ford fire truck. Vic notes siren need repair, but rotating assembly spins freely by hand. Really neat piece.
181
Glass gazing balls or globes, yard lights, low voltage timer switch, ceiling fixture.
182
Nifty 9" electric horn is noted to be 12 volt DC 'Oogah'.
183
Gamewell wall-mount fire station bell is 11" diameter. Seller notes 12 volt.
184
110 volt school bell approx. 6" diameter and comes with original wall mount. Sounds delightful.
185
Steel framed drawer organizer is 10" x 6" x 11" tall. Comes with assorted fasteners.
186
Foley Model 330 automatic tooth setter for circular saws up to 24".
187
Foley Model 352 automatic saw tooth setter.
188
Foley Model 385 automatic saw re-toother.
189
Ornamental ironwork and other curiosities. Longest is approx. 29".
190
Nice assortment of wooden spindles, legs, etc.
191
Faraday No. 121 vehicle horn, Type 2, 24 volt is about a foot long. Is this a locomotive horn?
192
Three-drawer file or card cabinet, plus an extra. Drawers each approx. 8" x 6". Also includes page protectors, and a portable steel file box.
193
Aluminum and stainless steel sheet and bar stock up to 8' long, and up to 7-1/2" wide. Plus brass and copper sheet up to 11" wide, steel pieces, more.
194
Impressive solid copper flat bar is 1/4" x 3" x nearly 7' long.
195
115 volt multi-speed squirrel cage blower with 10" x 11" exit. Fan spins freely and smoothly by hand.
196
3' floor squeegee, 2' shop broom, and 18" driveway and roof coating broom.
197
Craftsman router pantograph with five fonts or scripts. Currently mounted on a 4' x 20" base, but can ship without if you'd like.
198
Napa paint spray gun and cup, plus a gravity feed spray gun and cup.
199
Welder's or blacksmith's leather shop apron with adjustable straps is approx. 3' x 2' wide. Comes with a set of flame resistant welder's sleeves.
200
Super portable 110 volt stick welder is model WS0900 by Campbell Hausfeld puts out 70 amps and comes with a handful of rods. Runs on a common 15 amp circuit and takes rods up to 5/64". Machine is easy to set up and welds better than I do.
201
Stainless steel up to 4" wide; aluminum bar up to 1-1/2" x 3/8"; a whole bunch of 1-1/8" aluminum round; plus a little brass and copper. Longest piece is 12".
202
Sioux large angle grinder/polisher - runs, plus wire wheels, abrasive cup wheel, buffing wheel.
203
Craftsman 3"x21" belt sander, runs.
204
Craftsman ball bearing double insulated 1-1/2 hp router with work light and micro-adjust base. Runs well, comes with hard case.
205
2" x 14" copper pipe will make wonderful wind chimes. 2" x 1/4" copper bar is 7-1/2" long. Other copper and brass.
206
Craftsman 1-1/4 hp circular saw runs.
207
Apostle Isles cast iron parts to make a barrel stove or heater.
208
20" drawer of heavy and lighter gauge copper wire and similar. Heaviest we saw is 6 gauge copper.
209
Romex building wire or cable including 10-3 with ground, 12-2 with ground, underground feeder, 14-2 with ground, other.
210
20" drawer of heavy copper wire, cable, and similar including 10 gauge four conductor cable, armored cable, stranded wire around 6 or 8 gauge, more.
211
1/4" steel plate is 28" x 36"; galvanized heavy 3/16" screen is around 3' x 3'; other steel sheet, copper sheet, steel plate.
212
Stackable steel drawer units with eighteen drawers are great for shop storage and each drawer is around 9" x 6" x 16" deep. Come with some contents.
213
Stackable steel drawer units with fourteen drawers are great for shop storage and each drawer is around 9" x 6" x 16" deep. Come with some contents.
214
Lengths of 1/2" rigid copper tubing up to 9'; plus some 1/2" and 1/4" flexible copper tubing.
215
Full and partial lengths EMT conduit up to 1-1/2", channel iron up to 10" x 2-3/4", plus scrap steel, brass, copper, aluminum.
216
Handy work pedestal can be anchored to the floor and stands 3-1/2' tall. Nice for bench grinder or similar.
217
Glass cutters, utility knives, Fletcher sheet acrylic cutters.
218
6/12 volt battery charger and a halogen work light, works.
219
Craftsman direct drive 16" scroll saw with cast iron base and 2" capacity. Saw runs smoothy and comes with a nice assortment of blades. Table tips 45 degrees and is 14" long. Nice machine.
220
Norton and other grinding wheels up to 8" diameter for bench grinder and saw sharpening machinery. Widths 1", 1/2" and 1/4".
221
Super vintage Black & Decker heavy duty 1/2" drill motor spins 500 rpm.
222
CM Chisholm-Moore Model B ratcheting chain puller or hoist is approx. 2' long.
223
2" load binder. Strap shows little use.
224
Block and tackle with 3/8" rope. Piece measures 32" long. Handy for stretching fence, butchering animals, more.
225
One gallon wet and dry shop vac. Seller notes runs. Handy little vacuum for various projects!
226
10 gauge four conductor copper cable would make a nice 220 volt extension cord. Coil is 18" with eight loops, so we are guessing around 35'.
227
Industrial machine controls including forward/reverse toggle switch rated 3 hp 3 phase 220-550 volt style J2; Allen Bradley control box for overhead crane or similar; antique Bendix aviation Eclipse voltage regulator which would make a nice desk piece.
228
Western Electric Bell System old style rotary wall phone measures 5" x 10" overall. Nice decoration piece!
229
Galvanized heavy duty garbage can is 16" x 30" tall. Handle locks lid - good for storing bird seed, deer corn, etc.
230
Woven fireplace screen looks like stainless steel to me. 36" wide roll is approx. 13' long.
231
Starrett 100' chalk plumb line, Stanley 25' power lock tape measure, and Strait-line chalk line.
232
Craftsman 1/2", 3/8", and 1/4" drive 6 and 12 point sockets and other brands. Some are deep wells.
233
Assortment of 80" bandsaw blades of various sizes from 1/8" scroll and up to 1/2" skip tooth rip. Comes in handy wooden organizer.
234
Four pry bars up to approx.. 28". Smallest is a Vaughn Superbar.
235
Die setting and other pry bars, tire spoon. Longest is 27".
237
Steel shorts, good for smaller projects and for around the farm. Tubing, bar stock and structural iron up to 4' long and up to 3" wide.
238
Cord-O-Matic Model 900 self-retracting power cord with work light. Please bring tools to remove from wall.
239
Steel bar, angle, and flat stock up to 20' including square stock up to 1/2", round stock up to 1/2", 1" tubing, 1/8" x 1" bar stock, 1/8" x 1" angle iron. Bring a hack saw, if you cannot haul 20' lengths.
240
Ornamental ironwork components including 1-3/4" stair top rail up to 20'; 5/8" square hammered edge spindle stock up to 20';
241
Angle iron and square tubing up to 20' including 1/8" x 2" and smaller angle; 1/16" x 1-1/2" and smaller square tubing.
242
1/4" x 3" aluminum angle; plus steel square tubing up to 2-1/2"; rectangular tubing up to 2" x 1"; 1/4" x 1" hot rolled flat bar; 1" channel iron; more. Longest piece approx. 15'.
243
Tire patch tools and components, vinyl repair kit, more similar in a .30 cal M25 tracer ammunition box.
244
I.I. & B. Co. screw jack is marked 1-1/2 x 10 and stands 15" as pictured.
245
Two hydraulic bottle jacks each approx. 10" tall. Both raise.
246
Model T Ford mechanical jack with top swivel adapter which is often missing. 9" tall as pictured.
247
Cast iron and other combination square heads; 6" cast brass base; 3" brass bell, missing clapper; more.
248
Hudson hay mow pulley No. 823 is in very good condition and measures approx. 12" overall.
249
US marked pocket knife by Camillus 1982. Measures 3-3/4" closed.
250
Cute little drill index contains bits 61-80 and case is marked 'Shanghai China', measures only 2".
251
Sears / Craftsman battery operated shop clock works; plus a No Hunting sign and a wooden Orchard sign. Orchard sign measures about 2' wide.
252
Seven gate latches or overhead door latches with lock open-lock closed padlock hasps.
253
Lufkin No. 1176 folding steel rule opens to 6'.
254
Little Giant brand tap & die set by Wells Bros. Co. Taps & dies up to 3/4".
255
Bench press stands 1-1/2' as pictured and has a 1" Acme lead screw. Quick & handy for light press jobs, laminations, etc.
256
Heavy cast brass finial is 6" and has a delightful patina.
257
Clipper brand heavy duty momentary foot switch is rated 1 hp, 20 amp, 125-250 volt. Appears unused.
258
Craftsman 5" mini pliers; Thorson 3" breaker bar; Speedmaster 3/8" speed driver; 5/8" and 11/16" grommet punches; 6" adjustable wrench; Craftsman and other screwdrivers; more.
259
Miniature bronze or brass anvil is 3-1/4" horn to heel.
260
Cast iron bench mountable miniature vise has 1-1/2" jaws. Fits bench tops up to 3/4" and shows an old repair at mount.
261
Antique cast iron miniature vise has 1-1/4" jaws and mounts on a table or benchtop up to 1" thick.
262
Miniature cast iron bench vise has a shield emblem, 2" jaws and a shielded lead screw. Nicely designed and retains much of its antique paint.
263
Cast aluminum half-anvil is 6" long.
264
Small bench mountable vise has 2-1/2" jaws and was made in USA. Same pattern as a Stanley Defiance and mounts on a bench up to 2" thick.
265
Miniature cast iron anvil is 5" horn to heel. Marked 219 and 'L' in a diamond.
266
Stanley No. 1207 Defiance Model miniature bench mountable vise has 1-1/2" jaws and will install on a bench up to 1-3/4".
267
4-1/2" cast iron anvil has holes in base for mounting.
268
Two antique car horns - one is marked 'Auto-Lite', the other 'Delco-Remy'. Longest is 10".
269
Industrial duty keyed switches, toggle switch, double pole rotating or turn switch, start button, indicator lamp and 100 amp ammeter.
270
6-1/2' of double roller chain is 1-1/2" wide and would make a great damascus billet.
271
One box weld-on and one box bolt-on self-closing gate latches with padlock holes.
272
Old brass ooga horn is 14" and just needs a rubber squeeze ball. Horn is nice and loud.
273
Antique quick-adjust wrench by Walworth Mfg. retains original wooden handle and is approx. 1-1/2'.
274
Norton diamond grinding wheel No. D120-R50V-1/8 874293. Four wheel dressing stones and something cool in the tube.
275
Complete router bit set in a handy storage case. Case is 12" x 8-1/2" x 2".
276
17" wide tool tote comes with electrical wiring supplies including a Vol-Con tester, wire stripper, soldering gun, Columbia Tool Steel Co box, more.
277
Seven old style maple taps are each 2-1/2".
278
Assorted aluminum letters and numbers up to 4", plus a neat old wooden bracket that is nearly 11".
279
Universal Tool DA Sander is Model UT-2105 has a 5-1/2" pad.
280
Paint brushes, putty knives, paint can openers, more.
281
Roofing hatchet has a 6-1/2" head, 13-3/4" long overall.
282
Wonderful antique White Mfg. Co. Hot Blast torch has great patina and stands 8" overall.
283
No shipping. Eagle oil can stands 19" tall.
284
Antique brass torch stands 10-1/2". Piece is in good condition, retains original handle.
285
Antique brass torch stands nearly 11" and has original red wooden handle. Fill cap is missing.
286
Antique brass torch has a brass handle and a primer knob marked 'The Turner Brass Works of Syracuse, N.Y.'. Stands 9-1/2" tall. Top of torch is marked under and around primer pump '�mbert Detroit, Mich'.
287
Quantity of manilla marking tags are each approx. 4-3/4" x 2-1/2"; box of heavy three ring binder divider pages.
288
Ridgid 2-1/2" pipe chain wrench is marked C-18.
289
Assorted screwdrivers by Craftsman, Stanley and others, up to 24".
290
HO gauge model train pieces including 14 pieces curved track and 4 straight pieces, plus Tyco Chattanooga engine & caboose and a Dairymen's League train car, Tyco and Thunder Line transformers.
291
Three pair of Craftsman adjustable locking pliers are each about 9".
292
Three standard green glass Hemingray insulators, plus a smaller and a clear glass Hemingray insulator, more.
293
7" hoist hook, 1/4" chain binder, fence stretcher, other hooks and more.
294
Metal art - cut-out tree shape measures approx. 17" high x 14" wide.
295
Buckeye brand mechanical jack approx. 1-1/2' as pictured.
296
Lifetime brand foot pump jack is lightweight alloy construction and approx. 2' as pictured.
297
Pair of Pittsburgh heavy duty 3-ton jacks in good shape.
298
Williams and Racine brand C-clamps open up to 10".
299
Antique hand forged C-clamp is around 1-1/2' closed. Stearns & Co. 12" C-clamp.
300
Heavy framed C-clamp has a shielded screw and opens to 4-1/2". Great for the welding shop. Also, Stearns & Co. 8" C-clamp.
301
3/16" cable come-along has a 1-1/2' handle.
302
No shipping. Two gallons AW-32 hydraulic fluid, plus a gallon Trans-hydraulic fluid for John Deere.
303
Two handy wooden shop stools. Gray stool is 25" tall, other is about 23" tall.
304
Metal art pieces including butterflies up to 9-1/2" wide and several twisted wrought iron pieces each approx. 5".
305
Decorative oak leaf and grape vine accents up to approx. 16" wide, plus a bunch of wrought iron fence accent pieces in a 16" box. Pieces are each 1-3/4" high.
306
Fence system pieces including mounting brackets, handles and more. Largest brackets take 1-1/4" pipe.
307
Two boxes of decorative flower accents, larger pieces are 2-7/8" diameter and smaller are 2-3/4". Each box is approx. 7"x 7" x 4" and 6" x 6" x 4".
308
Variety of steel oak and maple leaf cut-outs up to 12"
309
Moving dolly measures approx. 30" x 18" x 5" high.
311
Handy 2' tall roller stand has a heavy duty base.
312
Coil of 1/2" woven copper cable is about 18" across.
313
Coil of 3/8" steel cable is 19" across.
314
BarrAcuda 2 four-jaw self-centering key chuck system for wood lathes comes with case. Product CSC3000C. Chuck key is not pictured but is included.
315
Two pair of Vise Grip fabricator clamps are 11".
316
HDX N95 respirator masks with contoured fit. Box states 25 pieces and looks about full.
317
Seven Craftsman lathe tools and one other. Includes 3 scoops, 3 points, more. All about 12" long.
318
Large assortment of cut-off wheels from 4-1/2" to 10-1/2". Arbor hole sized incl 7/8" and other.
319
Gardner Bender Model 931 EMT rigid conduit bender for 1/2" and 3/4" pipe. Will ship without handle upon request.
320
Two 1/2" EMT conduit benders will ship without handles upon request.
321
Two hanks of rope each around 16" and 1/2" diameter.
322
Assorted abrasive or grinding wheels up to 9" diameter and up to 2" wide.
323
Saw sharpening and possibly other grinding wheels marked Norton, Belsaw, Flex-n-Cut.
324
Nice assortment of feeler gauges, have a set in every tool box.
325
Abrasive cut off wheels up to 8", Sait and other angle grinder hard wheels up to 6".
326
Durbin-Durco antique fence stretcher with rope hold. Larger pulley block assembly is 10" with hook.
327
Nice assortment of die grinding wheel, abrasive cone and flap wheels, cut off wheels.
328
Jackson NexGen auto-darkening welding helmet.
329
Full or nearly full spool Esab O.K. AristoRod 12.50, .035", 40 lb. Spool was removed from welder and is not dusty or gritty.
330
Veritas Snug-Plug cutter set, NIP; Set of wood screw clearance and countersink bits.
331
Standard and long reduced shank twist drills up to 1", more.
332
10" wreath of iron sleigh bells makes a cheery sound when hung on the door.
333
Advertising or promotional thermometer frame advertises Arnott Service Garage Charles J. Makuski, Proprietor and is old enough to have phone number 3042J2. 13" and without thermometer stick.
334
Craftsman No. 3641 trepan or circle cutter adjusts up to 8" diameter.
335
Twist drills up to 1/2" diameter. Most or all are USA brands.
336
3/8" and smaller extended length twist drill bits up to 1' long.
337
High speed steel countersinks or chamfers up to 1"; carbide burrs, 1" counter bore, pin vise with miniature drills stored in handle. Drill guide, step drill, end mills.
338
Stanley and other antique carpenter squares, some with rosewood and brass. Largest 10-1/2" x 6" excluding framing square.
339
Irwin No. 22 Micro-Dial expanding screw tip wood auger bores holes 7/8" to 3".
340
Large steel or iron plumb bob is nearly 7-1/2".
341
General Hardware No. 800 brass plumb bob with replaceable steel tip is nearly 5".
342
Knurled and nickel plated steel plumb bob is 3-1/2".
343
Install hose clamps like a pro, no more worm gear clamps. Kit includes punch-lok, clamp-master, p-38 hose clamp tool, driver, and a nice assortment of clamp bands.
344
Silver & Deming straight shank twist drill bits up to 1"; long drills, plumb bob, more.
345
Antique hand cranked saw tooth set is fully adjustable and advances the saw blade tooth by tooth while setting every other tooth left-right. 17" long and fully functional.
346
Brass stencils slide together for correct letter spacing. Each stencil is 3" high with a 1-1/2" character. Colored pens and smaller plastic stencils.
347
Brad tip twist drills with 3/8" shanks and some depth stop collars. Largest bit is 1" x 7-1/2".
348
Transfer punch set up to 1/2".
349
2" gouge for wood turning or carving has an impressively thick 3" tang and is 14" overall.
350
Stanley and Morrill's antique saw tooth sets, plus a tooth height file and cast iron gauge.
351
Tiltable machine vise for drill press or vertical mill has a 9" base and 3-1/2" replaceable hardened steel jaws.
352
Matthews extra large Safe Hed hexagon perimeter steel number stamps with 3/4" shanks. Each punch 3-3/4" long, set No. 1 through No. 20.
353
Screw and insert set for making strong connections in your wooden assemblies.
354
Extended length Silver & Deming style reduced shank HSS twist drill bits up to 7/8" by Cleveland. Longest 10", comes with rack.
355
Stearns Superior saw tool No. 15, plus another similar. Also includes Atkins and other saw tool and some gauges.
356
Model 100 cross slide machine vise for drill press or vertical milling machine has a 9" base and 4" replaceable hardened steel jaws. X and Y axises slide freely.
357
Cast bronze Kearney cable clamp is approx. 4-1/2" as pictured.
358
Hartford 2" gouge for lathe work is 20" long.
359
Forged or cast all-steel screwdriver is nearly 9".
360
Cummins 22 piece TiN coated hole saw kit up to 5".
362
Ornamental iron hoop, globe or ball is around 10" diameter with 1" straps. Very eye-catching and will look great in your yard or garden.
363
Cast accents or components for ornamental fences and gates measure 3-3/4" x 1-1/2".
364
13" box of cast iron finials for fence or gate tops, approx. 4" tall.
365
15" box of cast iron finials for fence or gate tops, approx. 4-1/2" tall.
366
Cast iron finials and accents for ornamental ironwork, fences, etc. Largest are 6" tall.
367
14" box of cast iron finials for fence or gate tops, approx. 4" tall.
368
15" box of cast iron finials for fence or gate tops, approx. 4-1/2" tall.
369
Lincoln Mig Welder gun and cable assembly for .035-.045 wire is 12' long and has 60 degree gun tube with adjustable nozzle. Model 250L K533-2. Appears in good condition and comes with ClearCo tip and nozzle jelly.
370
Antique cast iron corn shucker or huller comes with a nice wall mount bracket. 20" overall.
371
Will ship without storage rack. Handy set of various files incl square, triangle, round, more. Longest is 22".
372
Beautiful red oak framed 30" bow saw that you'll want to display, plus another you won't mind using.
373
10 gallon galvanized steel pail with lid stands 18" to rim. In good shape, great mouse-proof storage for birdseed or corn.
374
VanNorman Machine Tool speed reduction gear box is powered by a 110 volt motor and turns a 4" four jaw chuck. May be useful as a welding positioner.
375
Antique self feeding barn builder's peg hole beam auger stands 2' tall on a 2' base.
376
Craftsman router and table set comes with vacuum system, guides, mounting systems, lots of router bits incl Craftsman and other. Router runs, table is about 18" x 13" x 11" high and mounted on a board.
377
Heavy duty shop-made bender for 1" flat stock mounts in a vise and takes 1-1/2" pipe as a handle.
378
Bench mountable compact bender for ornamental ironwork and other projects. Comes with wheels up to 4". Handle extends to nearly 4' for good leverage. Comes with instructions and design book.
379
Ornamental hand forged wrought iron pieces up to 15". Great inspiration or decorative pieces.
380
Handy 3-1/2" x 6" axe head on a tight 3' handle.
381
Sheet steel and plate steel up to 1/4". Tallest sheet is 33", widest is 16".
382
Hanging steel yard beam scale is 2' long and weighs up to 200 lbs.
383
1 ton link displacement mechanical chain hoist and beam trolley. Please bring ladder, tools and help to remove from ceiling beam approx. 9' up.
384
Self retracting air hose reel can be ceiling or wall mounted and is 19" diameter. Currently in use. Please bring a ladder, tools and help to remove from approx. 9' ceiling.
385
Ball bearing trolley for hoist or door is 5" x 6". Chain hoist hook is 7" tall. Locking chain plate is 9".
386
Assorted taper and straight reams up to approx. 7/8"
387
Almost 3 lb P.F.R.H-15 progressive radius fuller on a tight 13" handle. Two other specialty hammers on tight handles. Body working anvil is 2-1/2" x 3".
388
Beautiful antique Toledo store or butcher scale measures by 1 ounce up to 30 pounds, and has one and two cent pricing scales. Stands nearly 2-1/2' high.
389
Craftsman and other ball peen hammers, largest weighs 16 oz. All heads tight, longest handle is 10-1/2".
390
Toledo Model 3111 scale weighs by one ounce up to six pounds and has one cent and two cent pricing scales. Stands 20" tall.
391
LP forge or foundry adjustable burner assembly is 19" long and has a 1-1/2" ID outlet.
392
Stackable steel drawer units with six drawers are great for shop storage and each drawer is around 8-1/2" x 6" x 15" deep. Come with some contents.
393
Landers Improved Balance No. 2 hanging 60 lb spring scale is 10".
394
Chunk of 1-1/2" steel plate is 18" x 16".
395
Early 30 oz notching or hot-cut fuller on a tight 11" era appropriate handle. Two smaller fullers, longer measures 13-1/2", tight heads.
396
2-1/2 lb cross peen hammer on a tight 13-1/2" handle. Nice handle. 2-1/2 lb blacksmith or engineers hammer on a tight 14" handle.
397
Left and right hand set diagonal fuller punches for rectangle or oval holes. Punch ends are 7-8" long. Heads are tight, handles approx 10-1/2".
398
Matched 3/8" rounding fuller and hardy. Fuller has tight 16" handle.
399
18" Scale beam assembly and weight.
400
Fairbanks Morse 35 lb scale with assorted weights. Measures approx. 2' wide.
401
32 oz Warren-Teed 85-2 cross peen hammer on a tight 15-1/2" handle. 20 oz specialty hammer or hot cut fuller on a tight 9" handle.
402
Hot cut or notching hardy is 6" tall and fits a 1" anvil hole.
403
Landers Improved Balance No. 2 hanging 60 lb spring scale is 10".
404
Hanging steel yard beam scale with tastefully ornate cast iron back weight. Measures 17" long.
405
Stackable steel drawer units with six drawers are great for shop storage and each drawer is around 8-1/2" x 6" x 15" deep. Come with some contents.
406
Stackable steel drawer units with six drawers are great for shop storage and each drawer is around 5-1/2" x 4" x 15" deep. Come with some contents.
407
Stackable steel drawer units with six drawers are great for shop storage and each drawer is around 5-1/2" x 4" x 15" deep. Come with some contents.
408
No. 75A Jacobs drill chuck has a 3/4" capacity and is mounted on a No. 2 morse taper shank.
409
Starrett No. 657 magnetic indicator base with a Starrett .001" jeweled dial indicator stands 8" as pictured.
410
6" stainless steel digital caliper with hard case and extra battery. Turns on.
411
Tumico tubular micrometer kit with standards measures 0 to 4".
412
Brown & Sharpe 0 - 1" micrometer; Starrett 1-2" micrometer; Starrett 2-3" micrometer. Smallest works well.
413
Thread pitch gauge, 8 tpi to 44 tpi; screw & wire gauge; Brown & Sharpe No. 615depth gauge; Mitutoyo thread gauge; two steel rules; hardened V block.
414
Edlund Model SR-2 scale 32 oz. capacity by quarter ounces.
415
Weld Fillet gage by Fibre Metal Co. measures weld fillets 1/8" to 7/8".
416
Small balance or scale with assorted weights and a quieting knob. Stands 8" above cabinet base which is 10" wide.
417
Belmont Hardware Co. 25 lb. hanging spring scale patented Jan. 23, 1900.
418
Wm. Enders oakleaf household scale measures to 24 lbs.
419
Hanging steel yard or beam scale with 24" main beam and custom display stand.
420
Triner beam scale was once affiliated with WI DNR.
421
Wood and wrought iron display stand is 3' tall.
422
Antique steel yard hanging beam scale is nearly 2' long.
423
Cast iron John Deere yard bell. Mounting bracket is 14".
424
Tapered square hole punch, 12" handle. 8" cast iron thumper.
425
3 lb cross peen hammer on a tight 14" handle. 10 oz cross peen hammer on a 9" handle.
426
Craftsman 8 oz ball peen hammer on a tight 9" handle. 28 oz ball peen hammer on a tight 14" handle.
427
Custom jig for starting a scroll on 1/4" bar stock. Approx. 4" long.
428
Hardy block for riveting or similar fits a 1" anvil hole.
429
1/4" radius hardy set with countersink might be used with rivets. Fits 3/4" anvil hardy hole.
430
5/32" radius top and bottom hardy with 3/4" anvil hole.
431
3/4" radius hardy fits a 1" anvil hole.
432
Sharpening steel and ceramic rod, longer is 17".
433
Antique adze head has a hardened edge and was unearthed after decades. Measures 8-1/2" and is fitted with a 25" hardwood handle.
434
Forstner style wood augers with hex shanks. Sizes 1/4" to 2-1/8".
435
Sharpening stone, whetstone, and die dressing stones up to 6".
436
R.J. Cunningham Designs Volumes 1, 3 and 4 books of ornamental wrought ironwork designs with details. Indispensable for fresh ideas and reference to classic patterns.
437
10 lb roll of mig stainless steel welding wire, Harris Welco, ER 316L, .030 dia, part number 0316LE5
438
Nice variety of radius hardies fit 3/4" and 1" anvil hardy holes. At least one is factory made and marked. Largest 3" x 2".
439
Assorted radius or rounding hardies for 3/4" and 1" anvil hardy holes. At least two factory made and marked. Largest approx. 3" x 2". Bonus piece.
440
2" hot cut or hot chisel fits a 3/4" hardy hole. Two round jigs or hardies.
441
Three anvil hardies with square and V shaped grooves fit 1" hardy holes. Largest is 4" x 2-1/2".
442
Hoop and sheet iron sign reads Wrought Iron Specialties and is 13" wide.
443
Two cast brass sleigh bells, larger is marked No. 12 and is 2-3/4" diameter. Mounted on a leather belt for hanging on your door.
444
16" blacksmith tongs for pipe or round stock are in good condition.
445
Besco No. 306 cast iron lead ladle is 13".
446
Two blacksmith or farrier tongs up to 20".
447
Two blacksmith or farrier tongs up to 20".
448
Offset blacksmith forge tongs are 20" long and were hand forged some time ago.
449
Two 12" nippers or cutters with fair to good jaws.
450
Two forge tongs, largest 22".
451
All steel lead ladle is nearly 14".
452
Assorted forge or farrier tons up to 18".
453
Pair of large blacksmith tongs up to 20".
454
Two specialty blacksmith tongs with handle knobs for lock ring.
455
Three farrier or blacksmith tongs up to 18".
456
Large and small nippers, approx. 14".
457
No. 4 lead ladle, cast iron bowl with a steel handle is nearly 17".
458
Super long specialty farrier or blacksmith forge tongs are 2-1/2' long.
459
Two forge tongs up to 19".
460
Hand forged blacksmith tongs are 19" long; other smaller tongs.
461
Specialty blacksmith forge tongs have round jaws with circle or cup indentations, 16" long.
462
Blacksmith or farrier tongs or nippers are 14".
463
Three blacksmith tongs with slender jaws, longest is 19".
464
Dasco 14" cutting nipper. Champion 14" ball bearing cutter nipper with replaceable jaws.
465
Large blacksmith tongs with double concave jaws are nearly 21".
466
Pair of anvil hold-downs or third-hands, longest is 11". Wrought iron U shaped pieces that ring like tuning forks, more.
467
Scroll or bending jig for ornamental ironwork fits a 1" anvil hardy hole; Other 6" jig for 3/4" hardy hole; third piece is a custom jig approx. 8" x 8".
468
PVC pipe fittings up to 2-1/2", joist hangers, switch and receptacle plates, assorted steel and non-conductive wall boxes.
469
Black & Decker WorkMate portable project center and vise folds up for easy storage and stands 2-1/2' high.
470
Henrob 2000 oxy-acetylene welding & cutting torch enables you to do things a standard torch set will not. Read up on these, they're pretty spectacular.
471
3-1/2 lb Greene-Tweed No. 4 soft blow mallet head on a tight 14" handle.
472
C. Hammond No. 5 cobbler's hammer with 4-1/4 inch,1-1/2 lb tight head on an 11" handle.
473
20 oz 4-1/2" head on a tight 14" handle. A little sharp for a straight peen hammer, a little dull for a hot chisel or cutting fuller. Handy nonetheless.
474
3 lb factory marked hot cut fuller or splitter has a tight handle
475
5 or 6 lb short sledge hammer on a tight 12" handle
476
26 oz hot punch head on a tight 11" handle
477
32 oz rectangle/oval hot punch head is on a 13" handle that's only a little loose
478
1/4" radius fuller or top V-swage is on a tight 12" handle. Head is factory marked 1/2.
479
Flatter or flattening fuller on a tight 11" handle.
480
28 oz round forming fuller is on a tight handle
481
2-1/2 lb heading tool for 1" rivets is also useful for blunting rod and square stock corners. Handle is tight
482
3 lb top rounding swage or radius tool with tight handle
483
2-1/2 lb top rounding swage or radius fuller has a tight handle. Head is stamped 1-1/8.
484
Plumb 32 oz cross peen hammer with a tight handle
485
14 oz rivet heading swage has a 3/4" dia pocket and a tight handle. Head is hand stamped 1908.
486
W.B.&I. Co rivet header or balling swage has a 3-1/2 lb head and a tight handle. Hemispherical cavity approx 1-1/4" dia.
487
3/8" radius corner fuller or top V-swage on a tight 12" handle. Head is marked 3/4.
488
2-1/2 lb blacksmith hammer on a tight 15" handle. Dave calls it a hand maul, I call it an Engineer or Machinist hammer. All we know for sure is Vic moved a lot of hot iron with it.
489
Early style forging hammer has a 4 lb. head on a tight handle.
490
1/2" square hot punch has a long 4-1/2 lb head on a tight handle.
491
Rectangular hot punch or corner fuller has a tight 3 lb head.
492
Cast steel top radius swage or rounding fuller has a tight 2-1/2 lb head.
493
Hickory Hardware, Ace, and other hinges, some NIP. Largest about 4-1/2" tall.
494
Three spools of brass toned chain. Longest spool is 16". Chain links about 1/2".
495
Montgomery Ward lawn tractor has a 694cc, 18 hp Briggs and Stratton engine. Tractor fires right up and runs well. Comes with 1-7/8" ball hitch. Tires have slight weather checking but good tread, hold air. Nice lawn tractor, ready to make into a racer or truck around the yard.
496
14" reversible rotary table, runs.
497
Foley model 385 automatic saw retoother, runs.
498
Foley Model 387 Automatic Saw Filer for sharpening circular saws up to 12" diameter. Runs.
499
Foley Model 352 automatic power saw tooth setter with four straight saw mount bars. Runs.
500
Duncan Meter parking meter stands about 4' tall. Classic piece.
755
1/4" steel plate is about 28" x 54".
756
Structural and ornamental iron pieces including 6" channel iron, 3-1/2" angle iron, square tubing up to 5", other as pictured.
757
Portable foundry furnace was fired with LP and has a heavy cast refractory lining. Interior 13" diameter x 7" deep. Includes steel crucible and tongs. Frame approx. 3-1/2' long x 2-1/2' wide, stands 4' tall. See lot 391 for possibly burner assembly.
758
Craftsman three dimensional deluxe router pantograph comes with router stencil set in various fonts.
759
Craftsman molding set fits 1/2", 5/8" and 3/4" arbors.
760
Stanley No. 700 bench mountable vise is a unique L-shape to accommodate vertical and horizontal work pieces.
761
Brass bell is mounted on a hardwood base. Rings nicely. Bell is 6" diameter. Base is 10" wide x 17" x 13" high.
762
Foley bench mount jig for setting teeth on circular saws up to 3' diameter. Heavy built adjustable fixture is 2' long.
763
Index card file box filled with decorative metal pieces including butterflies, leaves, sunflowers, some letters, more. File box measures 16" deep x 9-1/2" x 6-1/2".
764
Wrought iron plant hook has a 3-1/2" square mounting base and an 8-1/2" hook.
765
Adjustable circular saw sharpening or adjusting stand on swivel base is 12" high.
766
Tool sharpener with tilting table and adjustable angle guide. I believe it's currently set up with a diamond wheel for sharpening lathe tools and similar.
767
Pin punches, center punches, drifts, and more up to 8". Brands include Mayhew, Craftsman, Vlchek, others.
768
25' length of extension cord, 10-3, 50 amp fittings.
782
Four half round shaped metal objects and can be used for yard art. Largest is 32" across.
783
Decorative metal post yard art is 79" tall by 14" wide and has diamond shape in the middle. Would look great in your yard!
784
Hibachi style grill mounted on metal stand and measures 17" x 10" x 36" tall overall.
785
Homemade hand forged blacksmith shop sign with wall mounting brackets. Sign measures approx.. 16" x 20" and circle measures 12" across.
786
Heavy duty adjustable roller stand and is 32" x 33".
787
Wooden rack with pipe and holes for holding blacksmithing tools and measures 46" x 30". Would make a great rack for anything you desire!
788
Scotts speeder green 1000 seeder is 17" x 36" x 30" tall. Great little seeder for reseeding your lawn!
789
Yard art plant hanger made out of a steel ring with mounting base and measures 41"across.
790
Hay scythe in very good condition with 62" long handle and 32" long head.
791
Cute cast iron bench. Just add legs and put on your porch! Bench measures approx.. 38" x 12" x 16" tall.
792
Three Pony and other pipe clamps mounted on 3/4" pipe. Longest is 8'.
793
Three Pony and other pipe clamps mounted on 3/4" pipe. Longest is 55".
794
Cool yard art homemade bell is 70" tall and missing clapper. Nice piece for your yard!
795
Three metal deep throat C clamps and one wooden clamp. Largest is 5" x 24".
797
Gear reduction box, hydraulic pump, electric motor brackets, and more. We are unsure what they fit, but would go great in your spare parts!
798
Hydraulic pump, transmissions, couplers, and more. We are unsure what they fit. Nice pieces for your spare parts bin.
799
Vintage Salsbury snowmobile clutch and coil rewind. We are unsure what it fits. Nice decoration piece or something to add to your spare parts!
800
Ornate hand crafted cast iron decorative metal crescent with beautiful designs. Crescent measures approx.. 27" x 16" tall and would make a cool wall hanging, gate insert, shelf, and anything else you can think of!
801
Large metal saw blade with 1" teeth and 1-3/8" arbor hole. Blade would make great wall hanging and measures approx.. 28" across.
802
General Electric 1/2HP electric motor with 1/2" horizontal shaft. Seller notes runs.
803
1/3HP electric motor with 1/2" horizontal shaft. Seller notes runs.
804
1/4HP electric motor with small pulley. Seller notes runs.
805
Belsaw 1/2HP motor with on and off switch and could be made into a bench grinder. Motor runs and appears in good condition.
806
Cast iron pipe vise. Clamps 1/8" to 1-1/4" pipe.
807
Hand grinding stone with 5" stone and measures 10" x 5" x 5" overall.
808
Vintage metal tractor seat is 17" x 29". Could be made into a lawn decoration.
809
30 gallon propane tank with newer valve is 24" x 13".
810
Cast iron saw vise with 9" jaws and 14" tall.
811
Two steel and 1/2 steel drum. One is 55 gallon drum with locking lid and one 30 gallon drum. Plus extra locking rings.
812
Galvanized rolling sink with drain. Seller uses it for a cooler. Sink measures approx.. 29" x 15" x 38" tall.
813
Seven children and adult life vests. Largest adult is 42" x 50" chest size.
814
Handy folding work bench on rolling cart is 30" x 25" x 38" tall.
815
Two cute Radio Flyer 7 and True Value metal wagons. Some rust and wear noted, but should clean up beautifully and make great planters or children's wagons! Largest measures approx.. 15" x 15" x 42" long without handle.
816
American Scale Company Kansas City, MO platform scale with older restoration. Comes weights and has 1200lb weight capacity. Scale measures approx.. 23" x 36" x 50" tall. Platform measures approx.. 27-1/2" by 18".
817
Standard vintage platform scale with cast iron base and older restoration. Scale weighs up to 1000lbs and measures approx.. 27" x 37" x 45" tall. Platform measures 24" x 16".
818
Vintage platform scale with an older restoration. Has weights and measures up to 600lbs. Measures 32" x 32" x 38" tall. Platform measures 21" x 15".
819
Porter Ferguson hand portable hydraulic pump with 16" ram. Press measures approx.. 19".
821
Wooden toboggan is 17-1/2" wide by 93" long. Sled is in good condition and great for making your children's day!
822
Railroad spike sledgehammer. Handle has been replaced and head measures 10-1/2" long. Great heavy duty piece!
823
Some type of gear box. Seller states gear reduction box with input and output shafts and measures 20" x 12" x 12". Comes with couplers and handles.
824
4' antique brush cutter and 37" tree planting wedge. Great old tools to add to your collection or put on your wall!
825
Metal spark screen saver. Can be used for welding, fireplace, etc.. Screen measures approx.. 58" x 1" x 36" tall.
826
Blacksmith leg vise is 16" x 7" x 36" tall. Jaws are in good condition and measure 4". Great pieces of history for your home!
827
Blacksmith leg vise is 16" x 7" x 36" tall. Jaws are in good condition and measure 4". Great pieces of history for your home!
828
Pair of vintage child's wooden skis are 2-3/4" x 48" with leather bindings and would make charming wall hangings!
829
Blacksmith leg vise is 16" x 7" x 36" tall. Jaws are in good condition and measure 4". Great pieces of history for your home!
830
Antique foot pedal grinding wheel sharpening stone with homemade wooden frame. Pedal may need adjusting and would make a great flowerbed piece. Grinding wheel measures approx.. 31" x 28" x 50" tall.
831
Antique foot pedal grinding wheel sharpening stone with metal frame. Has original tags and sold new for $18.50 by Marshall Well Stores back in the day! Stone measures approx. 43" x 17" x 46" tall. Stone is in good condition and has a lubricator. Everything moves with ease and is ready to use!
832
Hydraulic ram with one hydraulic hose. Ram measures approx.. 6" x 6" x 32" long and is untested.
833
Five gallon pail filled with different size roller chain. Largest length measures 2" x 2-1/2".
834
Briggs and Stratton 5HP motor with horizontal shaft with a sprocket on the shaft and electric start. Pulls over, has compression, and oil looks good. . Seller notes hasn't run in a number of years.
835
Briggs and Stratton 3HP motor with horizontal shaft. Pulls over, has compression, and oil looks good. Seller states hasn't run for a number of years.
836
2" receiver hitch extension for holding a boat or canoe. Receiver measures approx.. 28" x 32" x 63" tall.
837
Homemade electric can crusher. Seller demonstrated how it works and item would make a cool addition to your garage! Crusher measures approx.. 32" x 8" x 18" tall.
838
Four Hall-Master 4.10/3.50-4 tires and rims with 300lb maximum load at 30PSI. Tread is in good condition and two appear to be new.
839
11 metal stair treads. Each tread measures approx.. 30" x 8-1/2" x 2".
840
Roll of 3/8" cable. Coil measures 1' x 1' x 2" thick. Plus roll of No. 6 type use or type RHH or type RHW XLPE 600 volts. Coil measures approx.. 3' x 2' x 2" thick.
841
Vintage Globe American Corp. cast iron wood burning stove with porcelain coating and ash clean out drawer. Stove measures approx.. 32" x 32" x 4' tall. Come and take a look for yourself on Open house whether it will work for your garage or make a great lawn ornament!
842
Five Star fold out aluminum four-wheeler, motorcycle, or lawnmower ramp with rubber gripping pads and 1000lb load capacity. Ramp measures approx.. 40" x 72" tall when folded out. Great handy piece for loading up your equipment!
843
Eye-catching antique wooden lounging sled with wooden back, armrests, and metal base. Sled measures approx.. 24" x 19" x 45" long. Sled is in overall good condition other than some wobbly joints that should be easy to fix and perfect for those snowy winter days!
844
15' 3/8" chain with grab hooks on both ends. No repairs noted and in very good condition.
845
9' 3/8" chain, 6' 3/8" chain, and two 2' 3/8" chains. Each chain appears to have never been used and are in very good condition.
846
9' of 1/2" chain with no hooks or repairs noted. Chain appears to have never been used.
847
9' of 1/2" chain with no hooks or repairs noted. Chain appears to have never been used.
848
Delightful antique wooden sled with metal base. Floor boards are in good condition other than a few cracks. Sled measures approx.. 22" x 6" x 53" long. Great decoration or piece for your grandchildren!
849
Charming vintage wooden sled with metal base. Wood is marked Royal Racer. Floor boards are cracked and missing some parts and will need to be repaired. Sled measures approx.. 22" x 6" x 41" long and would make a perfect decoration!
850
Assortment of metal and rubber caster wheels. Largest is 6".
851
Marathon Electric 115/208-230v motor model No. 7XA15TBFR5328 AE P. Motor turns on and has keyed 3/4" horizontal shaft.
852
Badland 12v 2500lb ATV winch mounted on 2" receiver hitch. Mount it on your four-wheeler and use it to for any woods project!
853
Two NIP Yard Guard 24" x 50' pottery netting with 1" 20 gauge mesh. Great for your garden, animals, and more!
854
Pair of wooden saw horses. Each measures approx.. 30" x 16" x 32" tall.
855
Keene Engineering dry washer shoot is in very good condition and measures 36" x 12" x 4".
856
Homemade wooden wire rack is 34" x 22" x 14" tall and comes with four partial spools of wire.
857
Stunning heavy duty 23" x 54" wooden door with handmade brackets. Very cool piece for decoration in your home!
858
Ninety degree V-belt gear reduction box takes belts about 1/2" wide. Both shafts spin freely. About 6" x 5" x 4" overall.
859
90 degree gear box with sprocket and a 1/2" shaft. Sprocket spins, but can't tell if shaft is spinning. Box measures 9" x 7" x 5" tall.
860
Boston reductor gear box with belt pulley on one side and chain sprocket on the other. Serial No. 117612, drive speed up to 1800 rpm. Input shaft measures 1/2", output measures 7/8" Shafts spins freely. Box measures 10" x 9" x 8" tall.
861
Ohio 90 degree gear box is currently seized up, hopefully just needs some oil. Shafts measures 5/8" and 1/2". Box measures about 4" x 5" x 5" tall.
862
Eberhardt Denver 90 degree gear box. Tag marked size 17LT ratio 19 and 1750 rpm. Input shaft measures 1/2", out put measures 5/8". Both shafts spin freely. Box measures approx. 5" x 2" x 4".
863
Large aluminum dock tie down is 15" x 5" tall. Looks like a specialty anvil.
864
Heinrich pneumatic machine vise for fast production work comes with foot actuator and takes 150 lb psi max. Stepped jaws are 4" wide and vise travel is around 5". Hoses appear to be soft and in decent condition. 13" overall.
865
Hanging metal sign with aluminum mounting bracket. Sign measures 17" x 10.
867
Chain hoist sheet metal clamp. Jaws open 3" and overall length is 15".
868
Antique foot pedal grinding wheel sharpening stone with wooden base and lubricator. Wood is in excellent refinished condition and would make charming house decoration! Grinding wheel measures approx.. 38" x 14" x 52" tall.
869
Homemade air tank is 21" x 12" x 18" tall. Comes with hose, shut off valves, and gauge.
870
Antique cast iron Champion hand crank forge blower. Made in Lancaster, PA USA patent dates April 15, 1902, June 11 and July 30, 1901. Blower is in excellent condition and turns over with ease despite it's age and is marked 400 on casing. Blower measures 16" wide by 4' tall by 20".
871
Assortment of chisels, punches, crows foot, pry bar, and more. Largest measures 12".
872
Mixture of chisels, punches, knock out bars, and more. Largest is 9-1/2" long.
873
Collection of chisels, punches, 3-1/2" brass punches, and more. Largest chisel is 9-1/2" long.
874
Crescent and other tin snips. Largest is 13" long.
875
Various lengths of chain. Includes decorative, new, and more chains.
876
7 horse shoes up to 7" across. Great repurpose pieces!
877
Collection of 1/4" cable clamps, chain repair links, garage door cables, and more.
878
Mixture of copper fitting include 3/4" and 1/2", couplers, and more.
879
Variety of wood, metal, and machine screws of various sizes. Includes No. 10/32, 8/32, 6, 8, and more.
880
Set of wood drill buts of various sizes. Largest is 1-3/8". Plus mixture of metal bits and more. Largest metal bit is 1/2".
881
Assortment of machine screws of various sizes from 8/32" to 1/4", washers, and more.
882
Large assortment of wood bits up to 1".
883
Large collection of Pittsburg hex wrenches including metric and standard.
884
Deep throat clamp is 3-1/2" x 4-1/2". Plus other small C clamps.
885
Armstrong and other adjustable 5" C clamps. One is missing a tip.
886
Variety of spring clamps up to 9" with opening of 3".
887
Two compass tools. One is marked PS & W Co. other is marked but unreadable. Largest measures 8-1/2" long. Plus variety of center punches and more.
888
Armstrong Chicago No. 104 and other C clamps. Two are 8" and one is 5".
889
Three nice extension cords, all look to be in good condition. Orange bundle about 15" long.
890
Carbide circuit board drills of various sizes measured in 1000ths.
891
Set of letter stamps A-Z wooden carrying case for compact storage. Stamps measure 2-1/2" long and heads measure 1/4" x 1/4".
892
Set of number stamps 0-8 with wooden carrying case. Stamps measures 2-1/2" long and numbers measure 1/4" x 1/4" and appear to be in good condition.
893
Vollmer Von Arnauld's dial indicator measuring gauge marked made in Germany. Cute little piece of history in good condition.
894
Delightful little 4" adjustable Crescent wrench is stamped RN. Made by Crescent Tool Co. of Jamestown N.Y. USA. Moves smoothly.
895
Set of number stamps 0-8 with wooden carrying case. Stamps measures 2-3/4" long and numbers measure 3/8" x 3/8" and appear to be in good condition.
896
Vintage hand saw with very fine blade is 15" long by 2". Great wall hanging.
897
Assortment of wire and brass brushes, pipe cleaners, and more. Longest brush measures 14".
898
Set of number stamps 0-9 with wooden carrying case. Number 6 shows some wear. Each measures 2-3/4" long and number measures 1/4" x 1/4".
899
2 pcs of No. 50 roller chain. Seller notes total length is approx.. 6'.
900
Griegel Method Tool Cat No. 607 marked W2 electrical crimping tool. Piece is in good condition and measures 10" long.
901
1/8" Hanson steel letter stamps, and a set of Hanson number stamps. Both sets complete, letter set comes with & symbol. Number set looks to be just over 1/8".
902
Pair of 10" Jorgenson wood clamps made by The Adjustable Clamp Co.
903
Number and letter stamps, label maker, more. Larger number stamps about 1/4"; incl 0,3,4,7,1,8. Two other smaller ones and a V.
904
Sturdy shelved cart comes with a variety of electrical supplies, conduit fittings, more. Cabinet about 18" x 9" x 30" over handle and has 6" wheels. 1/2" set screw couplings, set screw connectors, 3/4" Appleton T form, 1/2" Access fitting, Model 301 volt meter, more.
905
Shoemaker's anvil and stand mounted on wooden pedestal comes with a cobblers hammer that looks to be marked Phila. Cast iron stand is about 17" over last, whole unit about 31" tall. Marked Warranted on side. Would make a great decoration for your home!
906
Cute No. 60 cast iron stove by Atlanta Stove Works is nearly 3' tall. In good condition, includes inner grate. About 16" x 18" over feet.
908
Vintage 16" x 22" metal sign with appropriate age wear and 20" x 28" "No Parking" metal sign. Great wall hangings!
909
Rope block and tackle with 3/4" rope and appears to be in working order.
910
No shipping. Burgess propane powered insect fogger. Kills mosquitos and biting flies. Just in time for summer!
911
Mr. Heater indoor safe propane buddy heater. Untested but would be great for your next hunting trip!
912
Assortment of hydraulic hoses, quick disconnects, and more.
914
Galvanized turn buckles with hooks. Largest is 29" and will extend to 45" long.
915
Two handy motors. Chicago electric Manufacturing company utility motor and General electric motor with horizontal shafts which appears to have come out of a furnace.
916
Milsco universal seat that may fit on your tractor or lawnmower! Seat measures approx.. 17" x 18" tall.
917
Two piece universal seat. Could be used for your lawnmower or tractor and measures 19" x 16" x 18" tall.
918
Variety of hand, hack, coping saw, and more. Hand saw is 33" long.
919
Hole saw drills up to 4" with several different bit holders.
920
Variety of masonry bits up to 1-1/4".
921
Mixture of chain sprockets. Largest is 6". Some appear new.
922
Craftsman tube cutter cuts for 1/4" to 1-1/2", metal or copper line benders of various sizes, and more.
923
Cable clamps for 1/4" cable and roller chain links of various sizes.
924
Collection horse shoes up to 6" across. Great project pieces!
925
Two bearing blocks and more. Bearing block center hole is 1".
926
Variety of packing extractors sizes 1, 2, and 3.
927
Wiss right and left cut and other tin snips. Cutters look to be in good shape.
928
Large assortment of belt pulleys. Largest is 6" across.
929
Mixture of roller chain of various sizes. Largest chain is 1".
930
Assortment of flaring tools with clamp and bar. Can flare up to 5/8" tubing.
931
Antique single cylinder outboard motor. Does not pull over, but would make nice wall hanger in your man cave!
932
Mixture of used Timken and other bearings and more.
933
Lot consists of two pairs or scissors, tweezers, and stainless steel surgical style forceps. Some are marked Germany. Forceps can be used for removing fish hooks or clamping sinkers onto line. Handy mixture for your shop or tackle box!
934
Assortment of metal horse shoes up to 6" across.
935
Large variety of 3/8" lead anchors.
936
Needle nose and other vise grips. Jaws show some wear, but appear to be in otherwise good condition.
937
Assortment of springs up to 10".
938
Keystock of different sizes. Longest is 12". Plus variety of set screws and more.
939
Assortment of different size springs up to 15" long.
940
Chain saw chain repair tool with rivet spinner model No. 1100. Comes mounted on a board with extra rivets and chain lengths. Board is 24" long.
941
Stanley and Mason pop riveter with different size rivets.
942
Snap-on and Craftsman snap ring pliers and other snap ring pliers changeable heads. Plus large assortment of snap rings.
943
Two vise grips. Jaws appear to be in good shape measures 9" long.
944
Saw sharpening fixtures, jigs, and more.
945
10" Rigid and other pipe wrenches.
946
1/2" lead anchors and other 3/8" anchors.
947
Assortment of used saw blades up to 14". Nice blades for projects!
948
Selection of horse shoes up to 6" x 7". Perfect for coat hooks!
949
Sears Craftsman Pop Riveter and rivets of various sizes.
950
Large assortment of brass bushings up to 3" across.
951
Assortment of cast iron pulleys up to 9-1/2" across, and more.
952
Variety of measuring devices. Includes angle finders, rules, and more.
953
Mixture of pliers. Includes side cutters, needle nose, adjustable, and more. Great for your tool box!
954
Variety of pliers. Electrician, Fencing, and more.
955
Dremel Multi Pro Rotary tool with bits, sandpaper, instructions, and carrying case. Tool runs and would be perfect for your shop!
956
Pair of aluminum race horse shoes marked Kerckhaert and measures 5-1/2" across. Plus variety of horse shoes up to 6-1/2" across.
957
Craftsman 1/4" drive ratchet and mixture of sockets, extensions. Plus 3/8" drive ratchet with sockets. Great set for your garage!
958
Assortment of box end wrenches up to 3/8" and 25/32".
959
Craftsman open end wrenches up to 15/16" to 1". Wrenches show some wear but are still in good condition.
960
Set of Craftsman box end wrenches up to 1/4" to 1". Wrenches are in good condition and great for your next project!
961
Craftsman and Napa flare nut wrenches up to 5/8" to 11/16".
962
Set of Williams ignition wrenches. Plus Craftsman and other combination wrenches. Largest wrench is 3/4".
963
Craftsman and other ratcheting wrenches. Largest wrench is 7/8".
964
Craftsman, Snap-on and other sockets. Includes 1/2" and 3/8" drive and extensions. Plus Craftsman 3/8" ratchet and reducers 3/4" to 3/8".
965
Open end, combination, and box end wrenches. Largest is 7/8".
966
Mixture of automotive tools. Includes break adjusting tool, break spring removing tool, valve pliers, valve spring, and more.
967
Measuring devices including angle gauges, square, and more.
968
Battery post and other 2" jaw puller. Plus Extreme garage two ton three gear jaw puller set model No. 261-7429 and appear to be NIB.
969
Craftsman impact screwdriver with phillips head bit and measures 7" long.
970
Stanley chalk line, Stanley Surform No. 296 hand rasp, and angle gauge. Rasp comes with extra blades.
971
21 piece 3/4" drive socket wrench set 7/8" to 2". Set comes with handy plastic carrying case.
972
Starrett No. 491 protractor and rule. Tool appears to be in good working order.
973
3/4" drive ratchet and measures 19" long.
974
Set of six point deep well impact sockets and ranges from 7/16" to 15/16".
975
Napa hex end sockets for a 3/8" drive ratchet. Largest NB110.
976
LS Starrett metal sheet and plate, iron and steel measuring gauge No. 479. Gauge measures approx.. 6" long.
977
Craftsman stubby 3/8" drive ratchet with extended handle and measures 6-1/2" long.
978
Antique cast iron heat grate is 11-5/8" x 7-7/8" and is in good condition with beautiful designs.
979
18" bolt cutter. Jaws show some wear, but cutter appears to still be in good condition. Great for tackling those big bolts!
980
Three packs of aluminum oxide sandpaper; 11" x 9".
981
Stanley and Yankee push drill driver and Stanley marking gauge No. 47-064.
982
Assortment of sandpaper. Includes 1000, 320, 50, 80, and more grits.
983
Trade 4-1/2" angle grinder model No. 7966. Grinder runs and appears to be in good condition. Plus Greenly hole puncher and more. Largest hole punch is 3/4"
984
Stanley 50' tape measure, ENM tapeless measure, and more.
985
Partial roll of 14-2NM-B with ground. Great for your next project!
986
Northwestern 17 gauge electric fence wire. Roll appears to be mostly full. Plus spool of .035" welding wire and partial spool of electrical wire.
987
Swingline whammer staple gun in very good condition and looks to have been barely used. Great for your tool box!
988
Allen-Bradley oil tight limit switches, McCormick-Deering vacuum gauge, compass, and more.
989
Male and Female electrical cord ends, 220 electrical end, and more.
990
Fulton 2" ball trailer hitch coupler which mounts on a 3" channel and mixture of 2" balls.
991
Craftsman staple gun with various lengths of staples. Includes 3/4", 5/16", and more.
992
Two NIP quartz halogen auxiliary automotive lights and eye level break light.
993
Two Craftsman 3/8" speed wrenches. Largest measures approx.. 17" long.
994
This is an EXTRA lot, please do not bid on this
995
This is an EXTRA lot, please do not bid on this
996
This is an EXTRA lot, please do not bid on this
|
Auction License: 2370 |
Photo Gallery
|
|||||
---|---|---|---|---|---|
|