Schrader Dispersal
Listing ID#: 414202

Sale Location

Palmyra, NY 14522
Sale Dates and TimesSALE IS COMPLETED
Bidding Starts: Monday Jun 21
Bidding Ends: Monday Jun 28
Sale Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
Reynolds Auction Company

Contact: David Koeberle
Phone: 315-597-8815
Email: dak@reynoldsauction.com
Website: www.reynoldsauction.com

EstateSale.com ID#: 10614
View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Bidding with the Reynolds Auction Company, you accept the following terms and condition of this Auction:
- NO SHIPPING - PICK UP ONLY - You may check with Brickhouse Antiques at 315-597-3883 for shipping smalls
- All bidders are required to register prior to bidding on any item.
-Bids cannot be retracted or changed once the auction begins.
- All sales are final. Everything is sold "AS IS" with no guarantee or warrantee of any type including warrantee of merchantability and the purchaser by bidding on said item accepts that item without any such warrantee or guarantee and in a "AS IS" condition. It is the responsibility of the bidder to assure condition of items prior to bidding. We recommend an inspection of the lots prior to bidding. All condition reports given by the Reynolds Auction Co. are subjective and we will not be held responsible or liable for any errors in description including age, size, measurements, condition, rarity, importance or provenance,etc. We strive to give true, accurate descriptions on items but realize reports are subjective and are for informational purposes only.
- A BUYERS PREMIUM OF 15% will be added to ALL purchases.
- Credit card is the only method of payment for this auction. No other forms of payment will be taken.
- Payment is due in full within the time limits posted in the auction. For this auction, all payment will be made through the credit card you provided when you registered. We accept Visa and MasterCard only.
- 15% buyer's premium and NYS SALES TAX added to all items purchased. This is a new system, YOUR tax information MUST be entered BEFORE the auction closes. NO refunds will be made.
- By bidding with our auction company, you are entering into a contract with our terms and conditions. You are accepting responsibility to perform your duties as winning bidder, and agreeing that the Reynolds Auction Co., its employees, officers, owners, representatives, agents, and consignors will not be held liable for any losses, claims, liabilities, judgments, expenses, fees, or other damages arising from the use of our services, website, auction property, and this site, including property damage, injuries, dispute with another bidder, or breach by bidder of this site.
-All successful bidders will sign their receipt at the time of pick up indicating that all items are accounted for and in satisfactory condition. There will be No returns, refunds or exchanges on any items as this is an auction and not a retail situation.
-Reynolds Auction Co. will not be held responsible for any delays or interruption in internet service, errors, and/or omissions, caused by any means and does not guarantee continual, uninterrupted or error free service or use of the site.
-Reynolds Auction Co. has the right to suspend bidding, re-sell any item/lots for any reason and void any sale.
-All sales are subject to appropriate SALES TAX and buyer's premium. Buyer's premium is 15% of purchase price on every item and is subject to sales tax. If you are tax exempt, you MUST indicate this when you REGISTER and provide a recent copy of the form BEFORE THE AUCTION CLOSES or you will be charged sales tax. Once the auction concludes we cannot remove sales tax after the credit card has been processed.
-Bids cannot be retracted or changed once the auction begins.
- NO SHIPPING IS OFFERED FOR THIS AUCTION - PICK UP ONLY.
-All items in this auction must be picked up in the scheduled time frame. Please take notice of pick up time! If you cannot make pick up time, please have someone come on your behalf. There are no other times for removal. If you leave your without making arranements for pick, after 14 days, the item becomes the property of Reynolds Auction Co. and will disposed or resold and no refunds will be issued.
-Reynolds Auction Co. is NOT liable for any damage to property left on the auction premises after the auction and pickup timeframe has concluded. Reynolds Auction Co. is NOT liable for any damage to property transported or stored, past the auction day and pick up time. No refunds will be issued for any items damaged after the auction and pickup time frames have ended.
- No refunds or returns on any items sold in this auction.
Listing Information
Auction of Wood & Metal Working Equipment, Farmall Tractors, Trailer, John Deere Lawn Mower, Tools, Household & MORE! You can find the auction at https://reynoldsauctioncompany.hibid.com
Bidding Starts, June 21, 2021 and Bidding Ends, Monday, June 28, 2021 at 7:00 PM EST with soft close, extended bidding; Pickup ONLY, NO SHIPPING, Wednesday, June 30, 2021 from 10:00 AM - 6:00 PM EST at 145 Ellsworth Road, Palmyra, NY 14522, BUYER LOADS. VERY STRICT PICKUP - ON SITE - THIS IS THE ONLY PICKUP TIME & the ONLY access we have - If you can't make it - YOU need to make arrangements for someone else to pickup your items - IF THAT IS NOT POSSIBLE - PLEASE DO NOT BID. Buyer removes all items, but loader assistance will be available Resale Tax information must be entered no later than 4:00 PM EST, on the day the auction closes, if you do not provide the correct forms, tax will be charged and once charged will NOT be refunded. The sooner we receive the information, the better - Thank you.

 

Click the LINK Above to view ALL Auction LOTS - below are only a few 

1
Makita belt sander
model 9924DB

2

3
Freud, Inc.
4" joiner, model JS100, case


5
Craftsman router
1 horsepower


7
Grizzly air stapler
model G6043 with case


9
Grizzly dovetail machine
one finger piece missing


11


13
AMT belt & disc sander
1" belt, 8" disc




17
Craftsman 10" table saw
18 1/2" x 27" wood side table mounted on mobile cart base, BUYER REMOVES


19
Portable air compressor
air hose, air drier filters, accessories

20
Bench top grinder
BUYER REMOVES


22
Grizzly wood shaper with bits
3 hp, single phase, 220 volt, BUYER DISASSEMBLES & REMOVES, loader assistance available

23
Grizzly 10" table saw
model TSC-10L, 1 1/2 hp, 110 volt, BUYER DISASSEMBLES & REMOVES

24
Grizzly 6" jointer
110 volt, BUYER REMOVES

25
Shop Vac
14 gallon, 5.5 hp

26
Delta 13" wood planer
220 volt, extra blades, BUYER DISASSEMBLES & REMOVES

27
Craftsman 30" wood lathe
3 1/2" clearance with table & tools

28
Campbell Hausfeld professional paint system
high volumn, low pressure, model HV2000

29

30
Ryobi 10" chop saw
model TS-2510, mounted on mobile table, BUYER REMOVES

31
Montgomery Ward wood mortiser
mounted on mobile homemade base, BUYER REMOVES


33
Ridgid 400 pipe threader
110 volt, BUYER REMOVES


35

36
Misc. lumber
various varieties & sizes, lumber laying horizontally on West Wall, BUYER REMOVES

37
Rough Cut lumber
Standing upright on West Wall, various kinds and sizes, 2 1/2 - 2" thickness, BUYER REMOVES

38
2 sheet good homemade racks with contents
Misc. American flags, plywood lattice, press board, etc. mobile; BUYER REMOVES

39
Misc. lumber & trim pieces
Items in ceiling area of wood shop, BUYER REMOVES

40
Misc. lumber & scraps
Various kinds, items on rack on South Wall of shop, BUYER REMOVES

41
Misc. lumber & sheet goods
Various kinds, in rack on East Wall, partial sheets, one full sheet, 3/4" 4' x 8' birch plywood & luan; BUYER REMOVES

42
Lawn care products
weed control, insect killer, etc.

43
Misc. spray & other paints
most open, some stains, thinners, etc.

44
Vacuum pump & sand
cord needs replacement


46
3 composition hardware bins
with some contents

47
Router plate attachments
various router items

48
Ratchet straps, umbrellas, etc.
Vicki binoculars, 4 x40 Japan, rope pulley, straps, gloves, etc.

49
2 wood planes
Stanley Handyman & No. 5

50
Milwaukee & Skil drills
screw shooter & 3/8" drill

51
Bosch 1609 offset trimmer
with case & attachments

52
Makita palm sander & Rockwell circular saw
cord on saw needs replacement






58
2 flats of tools
screw drivers, tape measures, clamps, etc.


60



63
Socket set & prick punch set
Bench top 3/8" drive





68
3 bar clamps
2 - 72" and 1 - 78" lengths

69
4 bar clamps
24", 36", 48" & 55" lengths

70

71
2 bar clamps
34" & 35" lengths

72
2 bar clamps
40" & 47" lengths

73
Homemade wood mobile cabinet
Custom built to hold tools, bar clamps, work space, etc.; 30" x 48" x 62" height; BUYER REMOVES

74
Homemade work bench & boxes
bench 30" x 54" x 35" height, mobile, 3 wood boxes, one with hinged top 23" x 28", BUYER REMOVES


76

77
Ceiling fan
JC Penny

78
Co2 tank
24" height

79
2 dollies & vinyl rollers
rotating dolly & 7 1/2" roller

80

81
Tool box with contents
wrenches, allen wrenches, screwdrivers, etc.

82
Long masonry drill bits
from 5" - 20" lengths, various diameters





87


89
3 Quick-Grip clamps
2 - 18" & 1 - 16"

90
Group of clamps
C-clamps, Shop Fox, bar, Moore Pressure lever wrench

91
Group of castors
various sizes




95
Group of hand tools
Pry bars, ratchets, snap shot tool & accessories, etc.

96
Hack saws & levels
24", 30" and 48" lengths, etc.


98
Box lots
bungee cords, zip ties, T-slot track, caulk guns, misc. tools & related

99
2 Ridgid pipe wrenches
14" * 18" lengths



102
3 specialty tools
Virutese laminate tool, Push Master & Wood moisture instrument

103
2' & 4' step ladders
2' wood & 4' aluminum


105
Craftsman shop chair
swivel, height adjustable

106
2 levels & panel clamp
2' & 4' wood levels, 54" panel clamp

107
2 aluminum levels
2' & 4' lengths


109
Dayton electric motor
1 hp, 115/230 volts

110
2 shop chairs
arm mobile office chair & swivel stool

111
DuoFast strike stapler
model ST-18 with 2 boxes of staples

112
Specialty tools
Universal-Jig for bench saw, Grizzly anvil - 5" length, Drill grinding attachment

113
Work bench
34" x 81" x 35", wood top; BUYER REMOVES

114
Club Car electric golf cart
with 2 chargers; not currently running; possible switch electrical problem;

115
John Deere X540 lawn tractor
754 hours, 25 hp Kawasaki engine, 48" mower deck, hydrostatic transmission, multi-terrain tires, homemade wood cab, tire chains, 47" front snow blower attachment, extra gauge wheels, lubricants, etc.; Runs & Drives

116
Troy-Bilt chipper shredder
Tecumseh 10 horse power engine, pulls over, did not start, has not been used in a few years; BUYER REMOVES

117
Huskee log splitter
tow-behind, 5.5 hp Honda engine, 27 ton capacity, pulls over, did not start, tires need to be put back on rims; BUYER REMOVES

118
Tow behind lawn roller
24" concrete filled, BUYER REMOVES

119

120
EZ-Access aluminum ramp
3' x 10' length with railings; BUYER REMOVES

121
Farmall A tractor with blade
72" front blade, DOES NOT TURN OVER; BUYER REMOVES

122
Farmall H tractor
Front loader & rear hydraulic backhoe, 16" digging bucket, motor turns over; hitch & PTO pump included, BUYER REMOVES

123
Homemade lawn trailer
4' x 8' wood sides & deck; BUYER REMOVES

124
Tradesman 4" drill press
12 speed, model 8075 with multi-direction vise; LOCATED IN BASEMENT OF SHOP - BUYER REMOVES - BRING HELP - LOADER ASSISTANCE AT THE DOOR

125
Sears Craftsman bench grinder
LOCATED IN BASEMENT, BUYER REMOVES

126
Large Davis drill press
75" height, running condition, LOCATED IN BASEMENT OF SHOP - BUYER REMOVES - BRING HELP - LOADER ASSISTANCE AT THE DOOR

127
Davis metal lathe
Swing 12" bed length 42", centers 32", 1/2 hp, 115 volt; LOCATED IN BASEMENT OF SHOP - BRING HELP - BUYER REMOVES - LOADER ASSISTANCE AT THE DOOR

128
Power band saw
110 volt, mobile base, 1" blade, 76" height, LOCATED IN BASEMENT - BUYER REMOVES - BRING HELP - LOADER ASSISTANCE AT THE DOOR

129
Metal shaper
8" stroke, 110 volt

130
Grizzly G4003 metal lathe
12" swing, 36" centers, 1 1/2 hp motor, bed length 46", 110/220 volt, extra chuck & tooling; LOCATED IN BASEMENT - BUYER REMOVES- BRING HELP - LOADER ASSISTANCE AT THE DOOR

131
Group of machinist tools
chucks, cutters, measurement tools, etc.

132
Cabinet with contents of drill bits
large assortment of machinist bits, chain, gears, etc.



135
4000 PSI pressure washer
6.0 Tecumseh engine

136
Power grinding wheel
homemade frame, LOCATED IN BASEMENT - BUYER REMOVES - BRING HELP

137
Vermette Load Jockey
model 350, 350 pound capacity, hand operated

138
Mobile welding table
32" x 41", 3 1/2" Lakeside vise

139
Delta dust collector
model 50-840, 1 hp, LOCATED IN BASEMENT - BUYER REMOVES

140
14 sheets aluminum roofing
36" by 72" length, LOCATED IN BASEMENT, BUYER REMOVES

141
Miller Bobcat 225 G gas welder
AC/DC wedler, 8000 watt generator, on mobile base with winch for raising & lowering; LOCATED IN BASEMENT - BUYER REMOVES- BRING HELP - LOADER ASSISTANCE AT THE DOOR

142
Quantity of arc welding rod
various sizes; BUYER REMOVES

143
3 gas engines
4 & 5 hp Briggs & Stratton engine, running operation unknown;

144
Oxyacetylene torch set
hoses, torches, tanks, gauges, helmets, etc.
Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend







Sponsored Links

Schrader Dispersal

Reynolds Auction Company

Reynolds Auction Company


Contact: David Koeberle
Phone: 315-597-8815
Sale Location
145 Ellsworth Road
Palmyra, NY 14522
Sale Dates and Times
Sale Terms and Conditions
Bidding with the Reynolds Auction Company, you accept the following terms and condition of this Auction: - NO SHIPPING - PICK UP ONLY - You may check with Brickhouse Antiques at 315-597-3883 for shipping smalls - All bidders are required to register prior to bidding on any item. -Bids cannot be retracted or changed once the auction begins. - All sales are final. Everything is sold "AS IS" with no guarantee or warrantee of any type including warrantee of merchantability and the purchaser by bidding on said item accepts that item without any such warrantee or guarantee and in a "AS IS" condition. It is the responsibility of the bidder to assure condition of items prior to bidding. We recommend an inspection of the lots prior to bidding. All condition reports given by the Reynolds Auction Co. are subjective and we will not be held responsible or liable for any errors in description including age, size, measurements, condition, rarity, importance or provenance,etc. We strive to give true, accurate descriptions on items but realize reports are subjective and are for informational purposes only. - A BUYERS PREMIUM OF 15% will be added to ALL purchases. - Credit card is the only method of payment for this auction. No other forms of payment will be taken. - Payment is due in full within the time limits posted in the auction. For this auction, all payment will be made through the credit card you provided when you registered. We accept Visa and MasterCard only. - 15% buyer's premium and NYS SALES TAX added to all items purchased. This is a new system, YOUR tax information MUST be entered BEFORE the auction closes. NO refunds will be made. - By bidding with our auction company, you are entering into a contract with our terms and conditions. You are accepting responsibility to perform your duties as winning bidder, and agreeing that the Reynolds Auction Co., its employees, officers, owners, representatives, agents, and consignors will not be held liable for any losses, claims, liabilities, judgments, expenses, fees, or other damages arising from the use of our services, website, auction property, and this site, including property damage, injuries, dispute with another bidder, or breach by bidder of this site. -All successful bidders will sign their receipt at the time of pick up indicating that all items are accounted for and in satisfactory condition. There will be No returns, refunds or exchanges on any items as this is an auction and not a retail situation. -Reynolds Auction Co. will not be held responsible for any delays or interruption in internet service, errors, and/or omissions, caused by any means and does not guarantee continual, uninterrupted or error free service or use of the site. -Reynolds Auction Co. has the right to suspend bidding, re-sell any item/lots for any reason and void any sale. -All sales are subject to appropriate SALES TAX and buyer's premium. Buyer's premium is 15% of purchase price on every item and is subject to sales tax. If you are tax exempt, you MUST indicate this when you REGISTER and provide a recent copy of the form BEFORE THE AUCTION CLOSES or you will be charged sales tax. Once the auction concludes we cannot remove sales tax after the credit card has been processed. -Bids cannot be retracted or changed once the auction begins. - NO SHIPPING IS OFFERED FOR THIS AUCTION - PICK UP ONLY. -All items in this auction must be picked up in the scheduled time frame. Please take notice of pick up time! If you cannot make pick up time, please have someone come on your behalf. There are no other times for removal. If you leave your without making arranements for pick, after 14 days, the item becomes the property of Reynolds Auction Co. and will disposed or resold and no refunds will be issued. -Reynolds Auction Co. is NOT liable for any damage to property left on the auction premises after the auction and pickup timeframe has concluded. Reynolds Auction Co. is NOT liable for any damage to property transported or stored, past the auction day and pick up time. No refunds will be issued for any items damaged after the auction and pickup time frames have ended. - No refunds or returns on any items sold in this auction.
Listing Details
Auction of Wood & Metal Working Equipment, Farmall Tractors, Trailer, John Deere Lawn Mower, Tools, Household & MORE! You can find the auction at https://reynoldsauctioncompany.hibid.com
Bidding Starts, June 21, 2021 and Bidding Ends, Monday, June 28, 2021 at 7:00 PM EST with soft close, extended bidding; Pickup ONLY, NO SHIPPING, Wednesday, June 30, 2021 from 10:00 AM - 6:00 PM EST at 145 Ellsworth Road, Palmyra, NY 14522, BUYER LOADS. VERY STRICT PICKUP - ON SITE - THIS IS THE ONLY PICKUP TIME & the ONLY access we have - If you can't make it - YOU need to make arrangements for someone else to pickup your items - IF THAT IS NOT POSSIBLE - PLEASE DO NOT BID. Buyer removes all items, but loader assistance will be available Resale Tax information must be entered no later than 4:00 PM EST, on the day the auction closes, if you do not provide the correct forms, tax will be charged and once charged will NOT be refunded. The sooner we receive the information, the better - Thank you.

 

Click the LINK Above to view ALL Auction LOTS - below are only a few 

1
Makita belt sander
model 9924DB

2

3
Freud, Inc.
4" joiner, model JS100, case


5
Craftsman router
1 horsepower


7
Grizzly air stapler
model G6043 with case


9
Grizzly dovetail machine
one finger piece missing


11


13
AMT belt & disc sander
1" belt, 8" disc




17
Craftsman 10" table saw
18 1/2" x 27" wood side table mounted on mobile cart base, BUYER REMOVES


19
Portable air compressor
air hose, air drier filters, accessories

20
Bench top grinder
BUYER REMOVES


22
Grizzly wood shaper with bits
3 hp, single phase, 220 volt, BUYER DISASSEMBLES & REMOVES, loader assistance available

23
Grizzly 10" table saw
model TSC-10L, 1 1/2 hp, 110 volt, BUYER DISASSEMBLES & REMOVES

24
Grizzly 6" jointer
110 volt, BUYER REMOVES

25
Shop Vac
14 gallon, 5.5 hp

26
Delta 13" wood planer
220 volt, extra blades, BUYER DISASSEMBLES & REMOVES

27
Craftsman 30" wood lathe
3 1/2" clearance with table & tools

28
Campbell Hausfeld professional paint system
high volumn, low pressure, model HV2000

29

30
Ryobi 10" chop saw
model TS-2510, mounted on mobile table, BUYER REMOVES

31
Montgomery Ward wood mortiser
mounted on mobile homemade base, BUYER REMOVES


33
Ridgid 400 pipe threader
110 volt, BUYER REMOVES


35

36
Misc. lumber
various varieties & sizes, lumber laying horizontally on West Wall, BUYER REMOVES

37
Rough Cut lumber
Standing upright on West Wall, various kinds and sizes, 2 1/2 - 2" thickness, BUYER REMOVES

38
2 sheet good homemade racks with contents
Misc. American flags, plywood lattice, press board, etc. mobile; BUYER REMOVES

39
Misc. lumber & trim pieces
Items in ceiling area of wood shop, BUYER REMOVES

40
Misc. lumber & scraps
Various kinds, items on rack on South Wall of shop, BUYER REMOVES

41
Misc. lumber & sheet goods
Various kinds, in rack on East Wall, partial sheets, one full sheet, 3/4" 4' x 8' birch plywood & luan; BUYER REMOVES

42
Lawn care products
weed control, insect killer, etc.

43
Misc. spray & other paints
most open, some stains, thinners, etc.

44
Vacuum pump & sand
cord needs replacement


46
3 composition hardware bins
with some contents

47
Router plate attachments
various router items

48
Ratchet straps, umbrellas, etc.
Vicki binoculars, 4 x40 Japan, rope pulley, straps, gloves, etc.

49
2 wood planes
Stanley Handyman & No. 5

50
Milwaukee & Skil drills
screw shooter & 3/8" drill

51
Bosch 1609 offset trimmer
with case & attachments

52
Makita palm sander & Rockwell circular saw
cord on saw needs replacement






58
2 flats of tools
screw drivers, tape measures, clamps, etc.


60



63
Socket set & prick punch set
Bench top 3/8" drive





68
3 bar clamps
2 - 72" and 1 - 78" lengths

69
4 bar clamps
24", 36", 48" & 55" lengths

70

71
2 bar clamps
34" & 35" lengths

72
2 bar clamps
40" & 47" lengths

73
Homemade wood mobile cabinet
Custom built to hold tools, bar clamps, work space, etc.; 30" x 48" x 62" height; BUYER REMOVES

74
Homemade work bench & boxes
bench 30" x 54" x 35" height, mobile, 3 wood boxes, one with hinged top 23" x 28", BUYER REMOVES


76

77
Ceiling fan
JC Penny

78
Co2 tank
24" height

79
2 dollies & vinyl rollers
rotating dolly & 7 1/2" roller

80

81
Tool box with contents
wrenches, allen wrenches, screwdrivers, etc.

82
Long masonry drill bits
from 5" - 20" lengths, various diameters





87


89
3 Quick-Grip clamps
2 - 18" & 1 - 16"

90
Group of clamps
C-clamps, Shop Fox, bar, Moore Pressure lever wrench

91
Group of castors
various sizes




95
Group of hand tools
Pry bars, ratchets, snap shot tool & accessories, etc.

96
Hack saws & levels
24", 30" and 48" lengths, etc.


98
Box lots
bungee cords, zip ties, T-slot track, caulk guns, misc. tools & related

99
2 Ridgid pipe wrenches
14" * 18" lengths



102
3 specialty tools
Virutese laminate tool, Push Master & Wood moisture instrument

103
2' & 4' step ladders
2' wood & 4' aluminum


105
Craftsman shop chair
swivel, height adjustable

106
2 levels & panel clamp
2' & 4' wood levels, 54" panel clamp

107
2 aluminum levels
2' & 4' lengths


109
Dayton electric motor
1 hp, 115/230 volts

110
2 shop chairs
arm mobile office chair & swivel stool

111
DuoFast strike stapler
model ST-18 with 2 boxes of staples

112
Specialty tools
Universal-Jig for bench saw, Grizzly anvil - 5" length, Drill grinding attachment

113
Work bench
34" x 81" x 35", wood top; BUYER REMOVES

114
Club Car electric golf cart
with 2 chargers; not currently running; possible switch electrical problem;

115
John Deere X540 lawn tractor
754 hours, 25 hp Kawasaki engine, 48" mower deck, hydrostatic transmission, multi-terrain tires, homemade wood cab, tire chains, 47" front snow blower attachment, extra gauge wheels, lubricants, etc.; Runs & Drives

116
Troy-Bilt chipper shredder
Tecumseh 10 horse power engine, pulls over, did not start, has not been used in a few years; BUYER REMOVES

117
Huskee log splitter
tow-behind, 5.5 hp Honda engine, 27 ton capacity, pulls over, did not start, tires need to be put back on rims; BUYER REMOVES

118
Tow behind lawn roller
24" concrete filled, BUYER REMOVES

119

120
EZ-Access aluminum ramp
3' x 10' length with railings; BUYER REMOVES

121
Farmall A tractor with blade
72" front blade, DOES NOT TURN OVER; BUYER REMOVES

122
Farmall H tractor
Front loader & rear hydraulic backhoe, 16" digging bucket, motor turns over; hitch & PTO pump included, BUYER REMOVES

123
Homemade lawn trailer
4' x 8' wood sides & deck; BUYER REMOVES

124
Tradesman 4" drill press
12 speed, model 8075 with multi-direction vise; LOCATED IN BASEMENT OF SHOP - BUYER REMOVES - BRING HELP - LOADER ASSISTANCE AT THE DOOR

125
Sears Craftsman bench grinder
LOCATED IN BASEMENT, BUYER REMOVES

126
Large Davis drill press
75" height, running condition, LOCATED IN BASEMENT OF SHOP - BUYER REMOVES - BRING HELP - LOADER ASSISTANCE AT THE DOOR

127
Davis metal lathe
Swing 12" bed length 42", centers 32", 1/2 hp, 115 volt; LOCATED IN BASEMENT OF SHOP - BRING HELP - BUYER REMOVES - LOADER ASSISTANCE AT THE DOOR

128
Power band saw
110 volt, mobile base, 1" blade, 76" height, LOCATED IN BASEMENT - BUYER REMOVES - BRING HELP - LOADER ASSISTANCE AT THE DOOR

129
Metal shaper
8" stroke, 110 volt

130
Grizzly G4003 metal lathe
12" swing, 36" centers, 1 1/2 hp motor, bed length 46", 110/220 volt, extra chuck & tooling; LOCATED IN BASEMENT - BUYER REMOVES- BRING HELP - LOADER ASSISTANCE AT THE DOOR

131
Group of machinist tools
chucks, cutters, measurement tools, etc.

132
Cabinet with contents of drill bits
large assortment of machinist bits, chain, gears, etc.



135
4000 PSI pressure washer
6.0 Tecumseh engine

136
Power grinding wheel
homemade frame, LOCATED IN BASEMENT - BUYER REMOVES - BRING HELP

137
Vermette Load Jockey
model 350, 350 pound capacity, hand operated

138
Mobile welding table
32" x 41", 3 1/2" Lakeside vise

139
Delta dust collector
model 50-840, 1 hp, LOCATED IN BASEMENT - BUYER REMOVES

140
14 sheets aluminum roofing
36" by 72" length, LOCATED IN BASEMENT, BUYER REMOVES

141
Miller Bobcat 225 G gas welder
AC/DC wedler, 8000 watt generator, on mobile base with winch for raising & lowering; LOCATED IN BASEMENT - BUYER REMOVES- BRING HELP - LOADER ASSISTANCE AT THE DOOR

142
Quantity of arc welding rod
various sizes; BUYER REMOVES

143
3 gas engines
4 & 5 hp Briggs & Stratton engine, running operation unknown;

144
Oxyacetylene torch set
hoses, torches, tanks, gauges, helmets, etc.
Gallery Images Loading, Please Wait...
  • Home
  • Advertise Your Estate Sale for $39
  • Hire an Estate Sale Company
  • Add Your Estate Sale Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Schrader Dispersal
 Online Only Auction
Sale Date(s)
Bidding Starts: Monday Jun 21
Bidding Ends: Monday Jun 28
Sale Location

Palmyra, NY 14522
Company
Listing Terms and Conditions
Bidding with the Reynolds Auction Company, you accept the following terms and condition of this Auction: - NO SHIPPING - PICK UP ONLY - You may check with Brickhouse Antiques at 315-597-3883 for shipping smalls - All bidders are required to register prior to bidding on any item. -Bids cannot be retracted or changed once the auction begins. - All sales are final. Everything is sold "AS IS" with no guarantee or warrantee of any type including warrantee of merchantability and the purchaser by bidding on said item accepts that item without any such warrantee or guarantee and in a "AS IS" condition. It is the responsibility of the bidder to assure condition of items prior to bidding. We recommend an inspection of the lots prior to bidding. All condition reports given by the Reynolds Auction Co. are subjective and we will not be held responsible or liable for any errors in description including age, size, measurements, condition, rarity, importance or provenance,etc. We strive to give true, accurate descriptions on items but realize reports are subjective and are for informational purposes only. - A BUYERS PREMIUM OF 15% will be added to ALL purchases. - Credit card is the only method of payment for this auction. No other forms of payment will be taken. - Payment is due in full within the time limits posted in the auction. For this auction, all payment will be made through the credit card you provided when you registered. We accept Visa and MasterCard only. - 15% buyer's premium and NYS SALES TAX added to all items purchased. This is a new system, YOUR tax information MUST be entered BEFORE the auction closes. NO refunds will be made. - By bidding with our auction company, you are entering into a contract with our terms and conditions. You are accepting responsibility to perform your duties as winning bidder, and agreeing that the Reynolds Auction Co., its employees, officers, owners, representatives, agents, and consignors will not be held liable for any losses, claims, liabilities, judgments, expenses, fees, or other damages arising from the use of our services, website, auction property, and this site, including property damage, injuries, dispute with another bidder, or breach by bidder of this site. -All successful bidders will sign their receipt at the time of pick up indicating that all items are accounted for and in satisfactory condition. There will be No returns, refunds or exchanges on any items as this is an auction and not a retail situation. -Reynolds Auction Co. will not be held responsible for any delays or interruption in internet service, errors, and/or omissions, caused by any means and does not guarantee continual, uninterrupted or error free service or use of the site. -Reynolds Auction Co. has the right to suspend bidding, re-sell any item/lots for any reason and void any sale. -All sales are subject to appropriate SALES TAX and buyer's premium. Buyer's premium is 15% of purchase price on every item and is subject to sales tax. If you are tax exempt, you MUST indicate this when you REGISTER and provide a recent copy of the form BEFORE THE AUCTION CLOSES or you will be charged sales tax. Once the auction concludes we cannot remove sales tax after the credit card has been processed. -Bids cannot be retracted or changed once the auction begins. - NO SHIPPING IS OFFERED FOR THIS AUCTION - PICK UP ONLY. -All items in this auction must be picked up in the scheduled time frame. Please take notice of pick up time! If you cannot make pick up time, please have someone come on your behalf. There are no other times for removal. If you leave your without making arranements for pick, after 14 days, the item becomes the property of Reynolds Auction Co. and will disposed or resold and no refunds will be issued. -Reynolds Auction Co. is NOT liable for any damage to property left on the auction premises after the auction and pickup timeframe has concluded. Reynolds Auction Co. is NOT liable for any damage to property transported or stored, past the auction day and pick up time. No refunds will be issued for any items damaged after the auction and pickup time frames have ended. - No refunds or returns on any items sold in this auction.
Auction of Wood & Metal Working Equipment, Farmall Tractors, Trailer, John Deere Lawn Mower, Tools, Household & MORE! You can find the auction at https://reynoldsauctioncompany.hibid.com
Bidding Starts, June 21, 2021 and Bidding Ends, Monday, June 28, 2021 at 7:00 PM EST with soft close, extended bidding; Pickup ONLY, NO SHIPPING, Wednesday, June 30, 2021 from 10:00 AM - 6:00 PM EST at 145 Ellsworth Road, Palmyra, NY 14522, BUYER LOADS. VERY STRICT PICKUP - ON SITE - THIS IS THE ONLY PICKUP TIME & the ONLY access we have - If you can't make it - YOU need to make arrangements for someone else to pickup your items - IF THAT IS NOT POSSIBLE - PLEASE DO NOT BID. Buyer removes all items, but loader assistance will be available Resale Tax information must be entered no later than 4:00 PM EST, on the day the auction closes, if you do not provide the correct forms, tax will be charged and once charged will NOT be refunded. The sooner we receive the information, the better - Thank you.

 

Click the LINK Above to view ALL Auction LOTS - below are only a few 

1
Makita belt sander
model 9924DB

2

3
Freud, Inc.
4" joiner, model JS100, case

4

5
Craftsman router
1 horsepower

6

7
Grizzly air stapler
model G6043 with case

8

9
Grizzly dovetail machine
one finger piece missing

10

11

12

13
AMT belt & disc sander
1" belt, 8" disc

14

15

16

17
Craftsman 10" table saw
18 1/2" x 27" wood side table mounted on mobile cart base, BUYER REMOVES

18

19
Portable air compressor
air hose, air drier filters, accessories

20
Bench top grinder
BUYER REMOVES

21

22
Grizzly wood shaper with bits
3 hp, single phase, 220 volt, BUYER DISASSEMBLES & REMOVES, loader assistance available

23
Grizzly 10" table saw
model TSC-10L, 1 1/2 hp, 110 volt, BUYER DISASSEMBLES & REMOVES

24
Grizzly 6" jointer
110 volt, BUYER REMOVES

25
Shop Vac
14 gallon, 5.5 hp

26
Delta 13" wood planer
220 volt, extra blades, BUYER DISASSEMBLES & REMOVES

27
Craftsman 30" wood lathe
3 1/2" clearance with table & tools

28
Campbell Hausfeld professional paint system
high volumn, low pressure, model HV2000

29

30
Ryobi 10" chop saw
model TS-2510, mounted on mobile table, BUYER REMOVES

31
Montgomery Ward wood mortiser
mounted on mobile homemade base, BUYER REMOVES

32

33
Ridgid 400 pipe threader
110 volt, BUYER REMOVES

34

35

36
Misc. lumber
various varieties & sizes, lumber laying horizontally on West Wall, BUYER REMOVES

37
Rough Cut lumber
Standing upright on West Wall, various kinds and sizes, 2 1/2 - 2" thickness, BUYER REMOVES

38
2 sheet good homemade racks with contents
Misc. American flags, plywood lattice, press board, etc. mobile; BUYER REMOVES

39
Misc. lumber & trim pieces
Items in ceiling area of wood shop, BUYER REMOVES

40
Misc. lumber & scraps
Various kinds, items on rack on South Wall of shop, BUYER REMOVES

41
Misc. lumber & sheet goods
Various kinds, in rack on East Wall, partial sheets, one full sheet, 3/4" 4' x 8' birch plywood & luan; BUYER REMOVES

42
Lawn care products
weed control, insect killer, etc.

43
Misc. spray & other paints
most open, some stains, thinners, etc.

44
Vacuum pump & sand
cord needs replacement

45

46
3 composition hardware bins
with some contents

47
Router plate attachments
various router items

48
Ratchet straps, umbrellas, etc.
Vicki binoculars, 4 x40 Japan, rope pulley, straps, gloves, etc.

49
2 wood planes
Stanley Handyman & No. 5

50
Milwaukee & Skil drills
screw shooter & 3/8" drill

51
Bosch 1609 offset trimmer
with case & attachments

52
Makita palm sander & Rockwell circular saw
cord on saw needs replacement

53

54

55

56

57

58
2 flats of tools
screw drivers, tape measures, clamps, etc.

59

60

61

62

63
Socket set & prick punch set
Bench top 3/8" drive

64

65

66

67

68
3 bar clamps
2 - 72" and 1 - 78" lengths

69
4 bar clamps
24", 36", 48" & 55" lengths

70

71
2 bar clamps
34" & 35" lengths

72
2 bar clamps
40" & 47" lengths

73
Homemade wood mobile cabinet
Custom built to hold tools, bar clamps, work space, etc.; 30" x 48" x 62" height; BUYER REMOVES

74
Homemade work bench & boxes
bench 30" x 54" x 35" height, mobile, 3 wood boxes, one with hinged top 23" x 28", BUYER REMOVES

75

76

77
Ceiling fan
JC Penny

78
Co2 tank
24" height

79
2 dollies & vinyl rollers
rotating dolly & 7 1/2" roller

80

81
Tool box with contents
wrenches, allen wrenches, screwdrivers, etc.

82
Long masonry drill bits
from 5" - 20" lengths, various diameters

83

84

85

86

87

88

89
3 Quick-Grip clamps
2 - 18" & 1 - 16"

90
Group of clamps
C-clamps, Shop Fox, bar, Moore Pressure lever wrench

91
Group of castors
various sizes

92

93

94

95
Group of hand tools
Pry bars, ratchets, snap shot tool & accessories, etc.

96
Hack saws & levels
24", 30" and 48" lengths, etc.

97

98
Box lots
bungee cords, zip ties, T-slot track, caulk guns, misc. tools & related

99
2 Ridgid pipe wrenches
14" * 18" lengths

100

101

102
3 specialty tools
Virutese laminate tool, Push Master & Wood moisture instrument

103
2' & 4' step ladders
2' wood & 4' aluminum

104

105
Craftsman shop chair
swivel, height adjustable

106
2 levels & panel clamp
2' & 4' wood levels, 54" panel clamp

107
2 aluminum levels
2' & 4' lengths

108

109
Dayton electric motor
1 hp, 115/230 volts

110
2 shop chairs
arm mobile office chair & swivel stool

111
DuoFast strike stapler
model ST-18 with 2 boxes of staples

112
Specialty tools
Universal-Jig for bench saw, Grizzly anvil - 5" length, Drill grinding attachment

113
Work bench
34" x 81" x 35", wood top; BUYER REMOVES

114
Club Car electric golf cart
with 2 chargers; not currently running; possible switch electrical problem;

115
John Deere X540 lawn tractor
754 hours, 25 hp Kawasaki engine, 48" mower deck, hydrostatic transmission, multi-terrain tires, homemade wood cab, tire chains, 47" front snow blower attachment, extra gauge wheels, lubricants, etc.; Runs & Drives

116
Troy-Bilt chipper shredder
Tecumseh 10 horse power engine, pulls over, did not start, has not been used in a few years; BUYER REMOVES

117
Huskee log splitter
tow-behind, 5.5 hp Honda engine, 27 ton capacity, pulls over, did not start, tires need to be put back on rims; BUYER REMOVES

118
Tow behind lawn roller
24" concrete filled, BUYER REMOVES

119

120
EZ-Access aluminum ramp
3' x 10' length with railings; BUYER REMOVES

121
Farmall A tractor with blade
72" front blade, DOES NOT TURN OVER; BUYER REMOVES

122
Farmall H tractor
Front loader & rear hydraulic backhoe, 16" digging bucket, motor turns over; hitch & PTO pump included, BUYER REMOVES

123
Homemade lawn trailer
4' x 8' wood sides & deck; BUYER REMOVES

124
Tradesman 4" drill press
12 speed, model 8075 with multi-direction vise; LOCATED IN BASEMENT OF SHOP - BUYER REMOVES - BRING HELP - LOADER ASSISTANCE AT THE DOOR

125
Sears Craftsman bench grinder
LOCATED IN BASEMENT, BUYER REMOVES

126
Large Davis drill press
75" height, running condition, LOCATED IN BASEMENT OF SHOP - BUYER REMOVES - BRING HELP - LOADER ASSISTANCE AT THE DOOR

127
Davis metal lathe
Swing 12" bed length 42", centers 32", 1/2 hp, 115 volt; LOCATED IN BASEMENT OF SHOP - BRING HELP - BUYER REMOVES - LOADER ASSISTANCE AT THE DOOR

128
Power band saw
110 volt, mobile base, 1" blade, 76" height, LOCATED IN BASEMENT - BUYER REMOVES - BRING HELP - LOADER ASSISTANCE AT THE DOOR

129
Metal shaper
8" stroke, 110 volt

130
Grizzly G4003 metal lathe
12" swing, 36" centers, 1 1/2 hp motor, bed length 46", 110/220 volt, extra chuck & tooling; LOCATED IN BASEMENT - BUYER REMOVES- BRING HELP - LOADER ASSISTANCE AT THE DOOR

131
Group of machinist tools
chucks, cutters, measurement tools, etc.

132
Cabinet with contents of drill bits
large assortment of machinist bits, chain, gears, etc.

133

134

135
4000 PSI pressure washer
6.0 Tecumseh engine

136
Power grinding wheel
homemade frame, LOCATED IN BASEMENT - BUYER REMOVES - BRING HELP

137
Vermette Load Jockey
model 350, 350 pound capacity, hand operated

138
Mobile welding table
32" x 41", 3 1/2" Lakeside vise

139
Delta dust collector
model 50-840, 1 hp, LOCATED IN BASEMENT - BUYER REMOVES

140
14 sheets aluminum roofing
36" by 72" length, LOCATED IN BASEMENT, BUYER REMOVES

141
Miller Bobcat 225 G gas welder
AC/DC wedler, 8000 watt generator, on mobile base with winch for raising & lowering; LOCATED IN BASEMENT - BUYER REMOVES- BRING HELP - LOADER ASSISTANCE AT THE DOOR

142
Quantity of arc welding rod
various sizes; BUYER REMOVES

143
3 gas engines
4 & 5 hp Briggs & Stratton engine, running operation unknown;

144
Oxyacetylene torch set
hoses, torches, tanks, gauges, helmets, etc.