Yoder Lumber Charm Location and Excess Assets to Successful Ongoing Operation
Listing ID#: 367548

Sale Location

Millersburg, OH 44654
Sale Dates and TimesSALE IS COMPLETED
Thursday Feb 4, 2021 Completed
Sale Type
 Live Auction 
Company Information
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

EstateSale.com ID#: 11117
View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions

Bidder Terms and Conditions


These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.

 

  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.


 


  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:


IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .

 

  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.


“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.

“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.

“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.



“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.



“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.



“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.

"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.

"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.



“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.



“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.



“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.



“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.

 

“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.



"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.



“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.



“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.



“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.



“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.



"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.



“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.



“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).



“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.



“Property” means the Real Property and the Personal Property.



“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.



“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.

“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.



“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.



“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.



“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.



“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by

Seller).



"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.



“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.



“Without Reserve” means Absolute.

 

 



  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.


 


  1. Auction Conducted in the State of Indiana.


 




    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.

    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.




 


  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.




The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.



The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.

 

  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.

  2. Nature of the Auction.




X The Auction for the Personal Property is an Absolute Auction.



The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.

 

  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.


 


  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.


 


  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:


 




    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.




 




    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.




 




    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.




 




    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.




 




    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.




 




    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.




 




    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.




 




    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.




 




    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,




(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.

 



    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.




 




    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.




 




    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.




 




    1. Online Bids. Online bids may not be reduced or retracted.




 


  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.


 


  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.


 


  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.


 


  1.  


 


  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.


 


  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.


 


  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.


 


  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.


 


  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.


 


  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or


representation by Auctioneer

 

  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.




  1.  


Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.

 

  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.


 


  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the





vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.

 

  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.


 


  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.


 


  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.


 


  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.


 


  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.


 


  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.


 


  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.


 


  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.


 


  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.










 

  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled


to specific performance or other equitable relief.

 

  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.


 


  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.


 


  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.


 


  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.


 


  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.


 


  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.


 


  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.




 
Listing Information
Sawmill liquidation including 2 Mack Tractors with sleepers, 3 Volvo tractors with sleepers, 2- Cleereman carriages, Brewco run-around resaw system, 6' Salem head rig, Morbark Chip Pac, Precision Chipper, Jeffery Hammer Mill, 2- knucklebooms etc.This will be a very large auction with late-model well-maintained equipment in Excellent Condition! Live phone and online bidding available. Contact Myron @ 574-229-4341 to consign equipment for free marketing!

00
Information Lot
You are  welcome to inspect equipment week of sale from 8 to 5. Starting the auction with lot # 10 at 9:00 AM, will sell in catalog order. Buyers have 30 days to remove equipment (small items by Saturday February 6th at 5 PM) Free loadout on smalls Friday and Saturday from 8 to 5. Rigging is available call Eugene 260.350.8953

10
Threaded Rod
1/4"-1 1/4", all rods underneath stairs approx. 40 pcs. 3" - 3' NOTE lot # 10 - 79 are located in the maintenance building

11
Wooden Bolt and Bin Contents
Bolts, nuts, and washers

12
20 and 6 Ton Bottle Jacks
.

13
Black and Decker Grinder with Sharpening Head
.

14
Black and Decker Grinder with Sharpening Head
.

15
Bostitch Nailers
Roofing nailer and staple gun

16
Marquette 32-150 Battery Charger
.

17
Makita Cutoff Saw
.

18
Banding Tools
.

19
Steel Vise
.

20
2 1/2" Superrench
.

21
Pulley Puller
.

22
Porter Cable Portable Bandsaw
44 7/8" bands

23
Grinding and Buffing Wheels
16 total different sizes

24
Black and Decker 6" Bench Grinder
1/2" arbor

25
Baldor Bench Grinder/Buffer
Cat. No. 1021 W, 1.5 HP, 3 phase

26
Parts Washer
22" x 44" x 40" high

27
Steel Rack on Wheels
55" x 8' x 74" high

27A
5-Drawer File Cabinets
2 total

28
Steel Rack
36" x 36" x 27" high

29
Steel Rack and Contents
25" x 25" x 42" high

30
Steel Rack and Line Shafts
1 1/8"-3" rods, 26"-50" long

31
Ruger HP-1 Floor Jack
Serial # C-4076, 2000 lb. lift

32
Miller 200 Amp Portable AC/DC Welder
Serial # HD709488, not in working order, has engine missing

33
Lincoln SA-200-F-163 Portable Welder
Serial # A640330, stick welder, works good

34
Miller 250 Welder
Serial # 70-549559, single phase

35
Miller CP250TS Welder
Serial # T469568, 3 phase, tank not included

36
Pallet of Wrenches, Screwdriver, Chargers, etc.
.

37
Pallet of Chains, Power Tools, Jumper Cables, Tape Measures, etc.
.

38
Steel Welding Table with Wilton 500 Steel Vise
48" x 96" x 32" high, 3/4" steel top, has rack on one end to hang tools, etc.

39
Buffalo 1340 Mighty Turn Engine Lathe
Serial # 13002, 3 phase

40
Ellis 1600 Metal Cutting Band Saw
Serial # 16001849

41
Steel Cart on Wheels
61" x 24 1/2"

42
Steel Cart on Wheels and Contents
27 1/2" x 17 1/2 "

43
Steel Cart Loaded with Sockets, Air Impacts, Wrenches, Screwdrivers, etc.
25" x 36" x 34" high on wheels with 2 drawers

44
Rockwell/Delta 6 1/2" Table Saw
.

45
Miscellaneous Steel Adjustable Stands and Sawhorses
.

46
60" Wooden Stepladder
.

47
Stihl FS 88 Weedeater
Works

48
Ellis 9000 Drill Press with Foot Pedal
Serial # 90D00151, 1/8" - 3/4" chuck, includes 4 5/8" vise bit rack and all bits, variable speed

49
Pallet of Steel Bars, Regulators, Air Hammer, Electric Drill, etc.
.

50
Pallet of Welding Rods, Light Bulbs, Grease Gun, etc.
.

51
Pallet of Welding Rods and Nails
.

52
Pallet of Hydraulic and Gas Fittings
.

53
Pallet of Drill Bits, Wrenches, etc.
.

54
Pallet of Pry Bars, Hole saw, Levels, etc.
.

55
Pallet of Bolt Bins
Filled with bolts, nuts, washers, gas fitting, snap rings, screws, etc.

56
Pallet of Pipe
.

57
Pallet of Electric Motors
Gear oil, etc.

58
Pallet of Air Hoses, Wire, Extension cords, etc.
.

59
Pallet of Brooms, Sledge, etc.
.

60
Pallet of Grinding Wheels, etc
.

61
Pallet of Belts for Conveyors
5 1/2"-24" wide

62
Pallet of Bostitch Staples, Plastic, etc.
.

63
Fan and Miscellaneous Pallet
.

64
Air Tank, Heater, etc.
.

65
Chain, Battery, etc.
Does not include rosserhead.

66
Wooden Bin filled with Chain Parts, Cylinders, etc.
.

67
Steel Rack with Electric Supplies
63" x 14" x 74" high

68
Rack with Wire, Extension Cords, etc.
18 1/2" x 36" x 72" high

68A
Bolt Bin*
112 bins of bolts and nuts, 1/4”-3/4”

69
2-sided Steel Bin with Black Pipe Fittings
24' x 37" x 84" high

70
All Belts Hanging on Wall and from Ceiling
Lots of different sizes, 100+ belts

71
Sprockets and Pulleys
Lots of new sprockets and pulleys, this lot is located upstairs

72
Electronic Parts, etc.
.

73
13 New Browning Bushings and Miscellaneous Parts
.

74
New Bearings, Valves, etc.
Includes Browning bearings, fiberglass vibrating conveyor paddles, and vibrating conveyor drive .

75
Bearings, Sprockets, Cylinders, etc.
.

76
Used Sprockets
.

77
Chain Parts and Miscellaneous
.

78
Round Bolt Bin with Bolts, Nuts, etc.
.

79
Sprockets, Pulleys, Cylinders, etc.
.

80
32" Dayton Fan On Stand
1/2 HP, 2 speed

81
32" Fan On Stand
1/4 HP

82
32" Lasko Fan On Stand
1/4 HP

83
21" Dayton Fan On Stand
1/4 HP

84
21" Dayton Fan On Stand
1/4 HP

85
21" Dayton Fan On Stand
1/4 HP

86
Electric Heaters
.

87
New Air Filters
9- 24" x 24" x 1"  13- 12" x 12" x 1"

88
Banding Cart
With 5/8" plastic banding

89
Banding Cart
With 3/4" metal banding

90
Banding Clips
1/3 of a 5 gallon bucket

91
Banding Tool
JK 1219, 509045

92
Orgapack Banding Tool
47/21809

93
Orgapack Banding Tool
CH 43, 45134

94
Crimping Tools
.

95
Banding Tools
Tightener and crimper

96
Signature Frostless 22 Refrigerator and 2 Chairs
.

97
Rubber Maid Utility Cart
1 yd. 2000 lb. max

98
Air Hoses and Cords
Includes 4 air nozzles

99
Scoop Shovels
.

100
Snow Shovels
.

101
24" Push Brooms
.

102
Conduit Benders
8" and 12"

103
Conduit Benders
10" and 6"

104
Cant Hooks, Axe and Sledge Hammers
.

105
Lasers
Lasalign model 8301-60-AF, Laharco model 8202-60, Conneyus model 090-54

106
3 Grease Guns, SS Fish Tape, Padlocks and Penetrating Oil
.

107
Jockey Grinder With Milwaukee Drill
.

108
Hanchet Jockey Grinder With Milwaukee Drill
Size E54, shop # 646P

109
Chicago Air Impacts
.

110
Makita 16" Electric Chainsaw
.

111
Sharpening Tool With Black and Decker Grinder
.

112
Tecomec FL 136 Grinder
LR 36941, serial # 061999

113
Hammer, Pipe Wrench and Misc. Hand Tools
.

114
Skate Rollers
13" wide approx. 25', no legs

115
Falk Motor Reducer
Model 114E406A1, ratio 198.1

116
Electric Motor
40 HP

117
Falk Gear Reduction
Model 102-43Z2-06A5, 10 HP, ratio 11.12, Westinghouse motor, 10 HP, 3 phase

118
Hydraulic Unit
15 HP

119
Steel Cart On Wheels
4' x 10'

200
Morbark Model 648 Rosserhead Style Debarker
Includes operators cab and all controls, electric over hydraulic, 480/ 3 phase, 50 HP motor for head, installed new in 2007, very good condition, 1st lot of an entirety

201
Starter for Debarker
.

201A
Capacitor and and Cutoff Switch for Debarker
.

202
4-Strand Log Deck
11'6" x 19' with 66" steel legs with stop and load, PEER chain, electric drive

203
Webster Vibrating Conveyor
30" pan x 30' long with 6" sides, electric drive, located underneath debarker, 18" off ground

204
DeMUTH Belt Conveyor
Model BC 500, serial 7667, 28" x 27', 23" belt, 36" steel legs, electric drive

205
Morbark Log Trough
52 1/2" x 30' with 47" steel legs, 12" MAC chain, hydraulic drive

206
Entirety Lot 200-205
With 10% raise

206A
Rosserhead Debarker Head
.

207
MDI TWA-200-HD Metal Detector
Hydraulic Drive, 17' through feed belt conveyor, 24" belt

208
Morbark Log Trough with Dual Kickers
52 1/2" x 25' with 12" MAC chain, hydraulic drive

209
5-Strand Transfer Deck with Load Off
13' x 14'6" with 26" steel legs on one end, other end mounted on concrete wall

210
Morbark Hydraulic Pack
Was used on lots 205, 207, 208, and 209

211
Webster Vibrating Conveyor
Model FSH, 24" pan, 6" sides, 27' long, 18" legs

212
Webster Vibrating Conveyor
Model FSLk 12" pan, 6" sides, 35' long, does not include 60" Fiberglass section, 30" section with dust holes, 18" off ground

213
CR-85 Electric Metal Detector and 60" Fiberglass Section
.

214
Jeffrey 34WB Top Feed Hammer Mill
Serial # 119790, does not include electric motor

214A
Baldor Soft Start
Was used on lot # 214

214B
125 HP Electric Motor
Was used on lot # 214, 3 phase, 445U frame, 230/460 V

214C
Capacitor and Cutoff Switch for Hammer Mill
.

215
Steel Up and Over Step
Top platform is 36" wide and 36" off ground

216
Cleereman Linear Positioning Carriage With 4 Brownsville Turners
Serial # 42-783 02, electric over hydraulic controlled, linear positioning, includes cab and controls, very good condition, 1st lot of an entirety

216A
Silvatech Scanning System
Includes Silvatech setworks in cab.

217
FSC Hydraulic Unit for Cleereman Carriage
Model PU30H80G-630-0797, serial # 2615-2498

218
Jacobson Engineering Feed and Drive
Model PX 8065P2 Y RL 9, serial # D702816, Input HP 125, Input RPM 1170/2000, HP Rating 400 HP at 1170 RPM,

219
Track and Frame
60 " x 60'

220
Entirety Lot 216-219
With 10% raise

221
Cleereman M36 36" Bar Type Log Turner
Serial # 3618-12902, very good condition

222
4-Strand Log Deck with Stop and Load
19' x 26', hydraulic Tulsa gear drive, 38" steel legs

222A
Double A Hydraulic Unit
15 HP, was used for log turner

223
Parts for Cleereman Carriage
.

224
Dust Blower to Cyclone
24", 10 HP electric motor

225
Cyclone
6', 32" diameter

226
6' Salem Head Rig
Serial # 83847-79, weight strain, good meat on wheels approx 1 1/4", does not include electric motor, good condition

226A
S-Trac Soft Start
Was used on lot # 226

226B
Lincoln 200 HP Electric Motor
Was used on lot # 226, 1785 RPM, Frame 445T

226C
Capacitor and Cutoff Switch for Head Rig
.

227
Mellott Drop Belt Conveyor
13' x 24" electric drive, air cylinder

228
Enterprise Live Roll Case
40" x 22' with 8 1/2" x 30" rolls

229
Guards
2-6', 1-7'

230
4-Strand Angled Transfer Deck
102" x 16' electric drive

231
Crosby 4" x 42" Edger
Serial # 29041, 100 HP electric motor, includes infeed/outfeed, hydraulic pack, lasers, tailing device setup for cutting 1/4 sawn

231A
Allis Chalmers Electric Motor
100 HP, 1770 RPM, frame 405T

232
Heaters
All heaters hanging from ceiling, total of 4

233
Edger Blades
20", total of 6

234
Chain Slab Drag
12' x 18' electric drive

235
5-Strand Grading Deck
C55B Roof Top Chain, 13' x 30', electric drive, does not include roll cases underneath

236
Spiral Roll Case Underneath Grading Deck
36" x 20', electric drive

237
Pop Up Roll Case Underneath Grading Deck
Live rolls 32" x 24', includes lift table

238
Drop Roll Case
12" x 19'

239
Crosby Trim Saw
Serial # 29040, 2-saw, 6'-17', 20" blades

240
Roll Case
32" x 23' with 8 1/2 " x 24" roll includes electric drive, 20" steel legs

241
Spiral Roll Case
41" x 16' with 8 1/2" x 30" rolls, no drive

242
4-Strand Green Chain
10' x 100' with 26" steel legs, popup on feed system, electric drive, C55B Roof Top Chain, chain is new

243
Lumber Cart
46" wide

243A
Lumber Cart
46" wide

244
Lumber Cart
91" x 38", wheels do not swivel, 16" off ground

245
Lumber Cart
91" x 38", wheels do not swivel, 16" off ground

246
Lumber Cart
91" x 38", wheels do not swivel, 16" off ground

247
Lumber Cart
91" x 38", wheels do not swivel, 16" off ground

248
Lumber Cart
91" x 38", wheels do not swivel, 16" off ground

249
Lumber Cart
91" x 38", wheels do not swivel, 16" off ground

250
Lumber Cart
91" x 38", wheels do not swivel, 16" off ground

251
Lumber Cart
91" x 38", wheels do not swivel, 16" off ground

252
Lumber Cart
91" x 38", wheels do not swivel, 16" off ground

253
Lumber Cart
91" x 38", wheels do not swivel, 16" off ground

254
Lumber Cart
91" x 38", wheels do not swivel, 16" off ground

254A
Lumber Cart
47" x 70" x 12"

254B
Lumber Cart
47" x 70" x 12"

254C
Lumber Cart
47" x 70" x 12"

255
Lumber Cart
47" x 70" x 12"

256
Air Tank
24" diameter, 84" high, These next lots are in the basement of the main sawmill.

257
Air Tank
42" diameter, 96 " long

258
Belt Conveyor
20" x 30' with 13" belt, electric drive

259
Webster FSH Vibrating Conveyor
Serial # 942-1517-1, 18" pan, 6" sides, 18" off ground, 55' long, does not include fiberglass section, 72" section with dust holes, electric drive

260
MDI W/CR-85 Metal Detector with 60" Fiberglass Section
.

261
Belt Conveyor
11" x 25' with 10" belt, electric drive

261A
Belt Conveyor
10" x 92" with 5 1/2" belt, 3 sides

262
Morbark 586E Chippac
Serial # 861, 6 knife with blower, 58", 6' x 6' screen in good condition, does not include electric motor

262A
Baldor Soft Start
Was used on lot 262

262B
Morbark Two Van Blower System
Includes electric motor, in good condition, was used up untill they installed the bin system

262C
Lincoln 125 HP Electric Motor
Was used on lot 262, frame 405T, 1775 RPM, 3 phase

262D
Capacitor and Cutoff Switch for Chipper
.

263
Paddle Conveyor on Incline
19" x 31"

263A
All Steel Slide Pans In Basement
Does not include any structural steel

264
Peerless WS 14 Unit Sawdust Bin
Approx 16' square.

265
Honeyville Bucket Elevator
M.43-24, serial # 94904A, 70' to platform

266
Sheldon Machine Co. Lathe
1/2 HP motor, 1 phase

267
Parts for Barn Sweep
.

268
Weg Electric Motor
50 HP, 3 phase, 326 TZ frame, 1775 RPM

269
Allis Chalmers Electric Motor
125 HP,3 phase, 1770 RPM, 405T frame

270
Howell Electric Motor
15 HP, 3 phase, 1150 RPM, 324U frame

271
Allis Chalmers Electric Motor
30 HP, 3 phase, 1750 RPM, 326U frame

272
Allis Chalmers Electric Motor
30 HP, 3 phase, 1750 RPM, 326U frame

273
Baldor Electric Motor
30 HP, 1725 RPM, 3 phase, 286T frame

274
Siemens-Allis Electric Motor
15 hip, 1745 RPM, 3 phase, 254T frame

275
Lima Electric Motor
10 HP 1800 RPM, 3 phase, 256U frame

276
General Electric Motor
5 HP, 1150 RPM, 3 phase

277
Electrical Supplies
Wire, shut offs, conduit, etc.

278
Conveyor Belts, Fiberglass Pieces, etc.
.

279
Hammers for Hog
.

280
Chipper Knives
.

281
8-Groove Pulley and Belts
21 1/4" pulley for 5" shaft

281A
Chipper Knives
5-set

282
Electrical
.

283
Electric Motors
Total of 8, 1/2 -7 1/2 HP

284
Electrical Supplies
.

285
Conduit
Over 50 pieces, 3/4"-1 1/2"

286
Wire
All wire on wall

287
Air Tank
30" diameter x 84" long

288
Sullair 25H Air Compressor
Serial# 81XN10-3430, 8561 hours, series 10

289
Allen Bradley Electric Panel with Starters
 38 starters

289A
480V Main Disconnect
.

289B
480V Main Disconnect
.

289C
480V Main Disconnect
.

289D
All Wiring in Building not Already Sold
Lighting, conduit, etc. 

290
Hanchett 109 Stretcher Roll
Serial # 1303, type 14

291
Grinding Wheels and Accessories in Wooden Cabinet
.

292
Hanchett Left-Hand Band Saw Grinder
Serial # 1349, size A230, includes blower

293
Hanchett 14" Band Saw Blade Shear
Serial # 1172

294
Thomson-Lane Saw Guide Block Grinder
Serial # 936, model B

295
Blower
1 HP electric motor

296
Chipper Knives
5 set

297
IKS 4080LP Knife Grinder
Serial # 1003

298
Bands for Band Mill
Total of 3, marked 'useable last resort'

298A
Band for Head Rig
38' 8" x 11", brand new

298B
Band for Head Rig
38' 8" x 11", brand new

299
Band for Head Rig
38' 8" x 11"

300
Band for Head Rig
38' 8" x 11"

301
Band for Head Rig
38' 8" x 11"

302
Band for Head Rig
38' 8" x 11"

303
Band for Head Rig
38' 8" x 11"

304
Band for Head Rig
38' 8" x 11"

305
Cleereman Carriage
Serial # 36-748 01, 36", 3 headblock, electric over air setworks, includes cab and controls, 1st lot of an entirety

306
Hydraulic Unit
50 HP electric motor, feed for drive

307
Cleereman Drive
.

308
Track and Frame
52" x 50'

309
Edmiston's Husk
Serial # VHE-208E, does not include electric motor, 56" blade

309
Edmiston's Husk
Serial # VHE-208E, does not include electric motor, 56" blade

310
4-Strand Log Deck
10' x 20' with stop and load, electric Tulsa gear drive,

311
Mellott #5 Log Turner
Includes controls

311A
Hydraulic Unit for Log Turner
15 HP electric motor

311B
Marathon 150 HP Electric Motor
Was used on lot 309, frame 445T

312
Entirety Lot 305-311B
With 10% raise

312
Entirety Lot 305-311B
With 10% raise

312A
56" Circular Saw Blade
F8 S Tooth

312B
56" Circular Saw Blade
F8 S Tooth

312C
56" Circular Saw Blade
F8 S Tooth

312D
Spare Parts for Circular Saw Blades
Everything in wooden cabinet, lot of brand new Simonds accessories

366A
Fromm A383 Pneumatic Sealless Combination Tool For 1-1/4" Steel Strapping
.

313
Edmiston's Drop Belt Conveyor
10' x 32' with 18" belt, electric drive with air cylinder

367
Adjustable Stands
Total of 5

314
Roll Case
32" x 152" with 6 1/2 x 20" rolls, electric drive

315
4-Strand Transfer Deck
116" x 17', C55B Roof Top chain, electric drive

316
Belt Conveyor
25" x 21" with 24" belt, electric drive

317
Brewco B-1600 Grade Run-around Resaw System
Serial # BBC-0106, The Wolf, with 5-way board separator , nice clean machine, includes complete runaround and hydraulic unit

318
Roll Case
32" x 39' with 20" x 6 1/2" rolls, 26" steel legs, electric drive

319
Transfer Deck with Jump Chain
10'6" x 11' electric Tulsa gear drive

320
Crosby 4" x 36" Edger
Serial 4656T, 2 moveable blades, with in feed and laser, includes hydraulic unit

321
4-Strand Transfer Deck
99" x 160", 18" steel legs, electric drive, C55B Roof Top chain

322
4-Strand Transfer Deck
93" x 150" with 22" steel legs

323
Roll Case
29" x 27" with 27" steel legs, 18" x 4 1/2" rolls

324
4-Strand Green Chain
10'2" x 82', one side has 17" steel legs, the other has 43" steel legs, electric drive, C55B Roof Top chain

325
Precision Husky 58" Chipper
6-knife, does not include electric motor, includes pipe to cyclone, 1st lot of an entirety

325A
125 HP Electric Motor
Was used on lot 325, more info coming

326
6' x 6' Rotary Chipper Screen
.

327
60" Cyclone
.

328
Entirety Lot 325-327
With 10% raise

329
Belt Conveyor
17' x 13" electric drive

330
Morbark Chip Blower
Serial # 12047GGJ, 10 HP electric motor

331
Honeyville HF26 Sawdust Blower
75 HP electric motor, 60"

332
96" Cyclone
Includes dust pipe from blower

333
Webster Vibrating Conveyor
12" pan, 6" sides x 60' long with 60" fiberglass section, 7.5 HP electric motor, located underneath circular saw to chipper

334
MDICCW-78 Metal Detector
Serial # 71284

335
Webster Vibrating Conveyor
12" pan, 4 sides, 90' long, 17" off floor, located underneath green chain

336
Belt Conveyor
17" x 25' with 11 1/2" belt, 4" sides, electric drive

337
Belt Conveyor
15" x 18', 3 sides, 10" belt

338
Lumber Cart
30" x 46"

339
Lumber Cart
30" x 46"

340
Lumber Cart
30" x 46"

341
Lumber Cart
30" x 46"

342
Lumber Cart
30" x 46"

343
Lumber Cart
16" x 46"

344
Lumber Cart
16" x 46"

345
Lumber Cart
16" x 46"

346
Lumber Cart
16" x 46"

347
Lumber Cart
16" x 46"

348
Lumber Cart
16" x 46"

349
Lumber Cart
16" x 46"

350
Lumber Cart
16" x 46"

351
Lumber Cart
16" x 46"

352
Lumber Cart
16" x 46"

353
Lumber Cart
16" x 46"

354
Lumber Cart
16" x 46"

355
Lumber Cart
16" x 46"

356
Lumber Cart
16" x 46"

357
Lumber Cart
16" x 46"

358
Lumber Cart
16" x 46"

359
Lumber Cart
16" x 46"

360
Hanchett A220 LH Saw Sharpener
serial # 1260

361
Banding Cart
.

362
Banding Cart
.

363
Banding Tools
.

364
1 1/4" Steel Banding
23 rolls

364A
1 1/4" Banding Clips
Approx. 1000 pieces

365
Fromm A383 Pneumatic Sealless Combination Tool For 1-1/4" Steel Strapping
.

366
Fromm A383 Pneumatic Sealless Combination Tool For 1-1/4" Steel Strapping
Model A26B1035, serial # 2651630, size 114

367
Fromm A383 Pneumatic Sealless Combination Tool For 1-1/4" Steel Strapping
.

367A
Steel Banding Cart and Banding Tools
.

368
Shop Built Hydraulic Press
.

369
Speed Reducer for 2 1/2" Shaft
.

370
Shop Built Buffing Machine for Brewco Band Wheels
.

371
Hanchett 413 LH Saw Sharpener
Serial # 228

372
Cooks Cat Claw Sharpener
.

373
Brewco Tooth Setter
.

374
Silvatech Log Scanning System
Complete set with computers and everything

375
SCMI M-2 Ripsaw
Serial # 8650475

375A
Patz Belt Conveyor
17" x 22' electric drive, has some damage

376
Grutter 1606 Left Hand Cut Off Saw
Serial # 23953, includes infeed and outfeed, 24" blade

376A
Westinghouse Electric Motor
150 HP, 3 phase

376B
Grutter Upcut Saw
Model 1604, serial # 25950-R. Needs Work

377
Patz Belt Conveyor
18" x 20'

378
LN2 Log Turner
.

379
Belt Conveyor
21" x 17' electric drive

380
Conveyor
12" x 50', not assembled

381
Montgomery 34HD50 Blo Hog Grinder
Serial # 1344, top feed, does not have a fan in the blower

381A
Webster Vibrating Conveyor
60' x 18" with 10" sides, electric motor, 20 HP Daylor

381B
New Anvil Set For Blohog
.

382
All Dust Pipe
.

382A
Lincoln Welder 9413
Stick welder, Ranger 8, works good, 2215 hours

382B
Skid of Electrical Supplies
.

383
Air Hoses and Air Nozzles
.

384
Wheelbarrows and Stepladder
.

385
10 Shovels
.

386
Cant Hooks and Concrete Placers
.

387
10 24" Push Brooms
.

388
Conveyor Belts, Grease Gun, Grinding Wheels, and Hydraulic Hoses
.

389
ACME Junior Circular Saw Sharpener
1/3 HP Baldor electric motor, serial # 903

390
Skid of Saw Blades
12" and 20" with 4" arbor, 16" with 3 1/2" arbor, 24" with 1" arbor

391
Air Hoses, Gas Cans, Electric Chain Saw, Grease Guns
.

392
Heavy Duty Vise, Saw Blades, 7" Metal Cutting Wheel, Electric Motor
.

393
11 Electric Heaters
.

394
4" Rockwell/Delta Joiner
.

395
Tire Chains
.

396
21" and 32" Electric Fans On Stand
.

397
Round Buffing Table
32" diameter, 1/2 HP electric motor

398
Wood-Mizer Band Sharpener
.

399
Dust Blower On 55 Gallon Drum
1 HP motor

400
Skid Of Parts For Hammer Mill
.

401
Rooftop Chains, 9" Rollers, 10" Conveyor Belts
.

402
Bolt Bin
35" x 42" x 12", 56 bins, no contents

403
Pallet of Miscellaneous Belts
.

500
2018 Volvo VNL Truck, VIN # 4V4NC9EJ6JN894663
Year: 2018
Make: Volvo
Model: VNL
Vehicle Type: Truck
Mileage:281,866
Plate:
Body Type:
Trim Level:
Drive Line: 6x4
Engine Type: L6, 12.8L
Fuel Type: Diesel
Horsepower: 475-524HP
Transmission:
VIN #: 4V4NC9EJ6JN894663

Features and Notes: , Volvo D13 500 HP engine, 12 speed transmission AT02612F, automatic, 281,866 miles, 3.08 ratio, 40,000 lb. steer tires are new, DOT approved, clean one owner truck in excellent condition, maintenance records available on request
 

501
2018 Mack Anthem Truck, VIN # 1M1AN4GY6JM001169
Year: 2018
Make: Mack
Model: Anthem
Vehicle Type: Truck
Mileage: 227,402
Plate:
Body Type:
Trim Level:
Drive Line: 6x4
Engine Type: L6, 13.0L
Fuel Type: Diesel
Horsepower: 435HP
Transmission:
VIN #: 1M1AN4GY6JM001169

Features and Notes: MP8-505E MACK engine, 3.08 ratio, 40,000 lb. clean, well maintained, DOT approved, one owner truck in very good condition, maintenance records available on request

501A
2016 Mack CXU613 Truck, VIN # 1M1AW21Y3GM075779
Year: 2016
Make: Mack
Model: CXU613
Vehicle Type: Truck
Mileage: 423,300
Plate:
Body Type:
Trim Level:
Drive Line:
Engine Type: L6, 12.8L
Fuel Type: Diesel
Horsepower:
Transmission: automatic
VIN #: 1M1AW21Y3GM075779

Features and Notes:  DOT approved, 40,000 lb.clean one owner truck in very good condition, maintenance records available on request
 

502
2016 Volvo VNL Truck, VIN # 4V4NC9EJ7GN956953
Year: 2016
Make: Volvo
Model: VNL
Vehicle Type: Truck
Mileage: 469,030
Plate:
Body Type:
Trim Level:
Drive Line: 6x4
Engine Type: L6, 12.8L
Fuel Type: Diesel
Horsepower: 475-524HP
Transmission: automatic 
VIN #: 4V4NC9EJ7GN956953

Features and Notes: Volvo D13 500 HP engine, ECO-Torque Volvo automatic transmission AT02612D, DOT approved, 3.08 ratio, 40,000 lb. clean one owner truck in good working order, engine light is on has something to do with DEF system.

503
2016 Volvo VNL Truck, VIN # 4V4NC9EJ0GN974159
Year: 2016
Make: Volvo
Model: VNL
Vehicle Type: Truck
Mileage: 476,366
Plate:
Body Type:
Trim Level:
Drive Line: 6x4
Engine Type: L6, 12.8L
Fuel Type: Diesel
Horsepower: 475-524HP
Transmission:
VIN #: 4V4NC9EJ0GN974159

Features and Notes: Volvo D13 500 HP, Eco-Torque Volvo Automatic transmission AT2612D, DOT approved, 2.47 direct drive, 40,000 lb. clean one owner truck in good condition, maintenance records available on request

504
2014 Volvo VHD Truck, VIN # 4V4KC9EH7EN165805
Year: 2014
Make: Volvo
Model: VHD
Vehicle Type: Truck
Mileage: 321,020
Plate:
Body Type:
Trim Level:
Drive Line: 6x4
Engine Type: L6, 12.8L
Fuel Type: Diesel
Horsepower: 425-474HP
Transmission:
VIN #: 4V4KC9EH7EN165805

Features and Notes: Volvo D13 435 HP, transmission FRO-16210B, 10 speed manual, 321,020 miles, DOT approved, 3.08 ratio, 40,000 lb. good working condition, maintenance records available on request

505
2013 Freightliner Coronado 132 Glider Truck, VIN # 3ALXFB007DDFD1804
Year: 2013
Make: Freightliner
Model: Coronado 132 Glider
Vehicle Type: Truck
Mileage: 778,075
Plate:
Body Type:
Trim Level:
Drive Line:
Engine Type: Reman Fitzgerald Glider Pre-emission
Fuel Type: 
Horsepower:
Transmission: 13 speed
VIN #: 3ALXFB007DDFD1804

Features and Notes: 13 speed manual, Reman transmission, new clutch, 2 Reman differentials and a Reman Fitzgerald Glider Pre-emission engine at 570,000 miles, DOT approved, 40,000 lb. good working order, clean truck, maintenance records available on request

505A
2005 Freightliner M2 106 Medium Duty Truck, VIN # 1FVACXDC75HU68586
Year: 2005
Make: Freightliner
Model: M2 106 Medium Duty
Vehicle Type: Truck
Mileage:  627,000 
Plate:
Body Type:
Trim Level:
Drive Line: 4x2
Engine Type: L6, 7.2L (439 CID)
Fuel Type: Diesel
Horsepower: 330HP
Transmission:
VIN #: 1FVACXDC75HU68586

Features and Notes: DOT approved, 6 speed manual

505B
2001 Freightliner Columbia 120 Truck, VIN # 1FUJA6CG71PJ03740
Year: 2001
Make: Freightliner
Model: Columbia 120
Vehicle Type: Truck
Mileage: 1,100,000
Plate:
Body Type:
Trim Level:
Drive Line: 6x4
Engine Type: L6, 12.7L (775 CID)
Fuel Type: Diesel
Horsepower:
Transmission:
VIN #: 1FUJA6CG71PJ03740

Features and Notes: Detroit 12 L Engine, Sleeper, Runs and Drives

506
1995 International 4900 Truck, VIN # 1HTSDAAN1SH635538
Year: 1995
Make: International
Model: 4900
Vehicle Type: Truck
Mileage:  771,912
Plate:
Body Type:
Trim Level:
Drive Line: 4x2
Engine Type: L6, 7.6L (466 CID)
Fuel Type: Diesel
Horsepower:
Transmission:
VIN #: 1HTSDAAN1SH635538

Features and Notes: , 6 speed manual, 24' 6" x 8' bed, runs and operates

507
2004 Ford Econoline Wagon Van, VIN # 1FBNE31L44HA78049
Year: 2004
Make: Ford
Model: Econoline Wagon
Vehicle Type: Van
Mileage: 244,510
Plate:
Body Type: 4 Door Van; Passenger
Trim Level: Base
Drive Line: RWD
Engine Type: V8, 5.4L (330 CID); SOHC 16V; EFI
Fuel Type: Gasoline
Horsepower: 235-260HP
Transmission:
VIN #: 1FBNE31L44HA78049

Features and Notes: 12 passenger, has some rust, runs and drives

510
Barko 160D Knuckleboom
On trailer, good tires delimber hookup, continuous swivel, new seat, hours unknown, runs and operates, ready for work

511
Peerless Timber Jack 217 OB Knuckleboom
Serial # CB1081, on trailer, good tires, one needs replaced, delimber hookup, heat, 4775 hours, continuous swivel, runs and operates

512
1987 Cat Model 518G Grapple Skidder
Serial # VO1551, Esco sorting grapple, Dual Arch, Winch, power shift, 23.1 x 26 tires, tires 20%, 21089 hours, open cab, runs and operates

513
1997 Morbark 22" Whole Tree Chipper
hours unknown, 600 HP, Cummins KTA600 Engine, Twin Disc clutch, clutch needs repair

514
Toyota Fork Lift
Model 02-3FGC30, serial # 3FGC3011062, 3 stage, side shift, 5700 lift, LP gas, does not run

515
Cat 525 Skidder Chains
.

516
John Deere 640G Skidder Chains
.

520
2006 Vanguard 53' Van Trailer
VIN 5V8A53206M605325

521
2005 Hyundai 53' Van Trailer
VIN 3H3V532C35T152027

522
2004 Wabash 53' Van Trailer
VIN 1JJV532W44L88609

522A
1997-53' Van Trailer
1997 Trailmobile, Model-01JA-1RAY, GVWR 65000, VIN 1PT01JAHXV6004682, Height 13' 6", Width 2.6M, sell W/title, Good Condition

522B
2004 53' Hyundai Van Trailer*
2004 Model# VP2530152AJS, VIN# 3H3V532C04T032040, GVWR 65000, trailer # 23554, Sells W/title, Good Condition

523
2003 53' Utility Van Trailer
VIN 1UYVS25333G097612

523A
2014 East 48' x 102" Flat Trailer with Tarp System
VIN 1E1H5Y289ER050388

523B
2012 East 48' x 102" with Tarp System
VIN 1E1H5Y281DRG47925

524
2007 East 48' x 102” Aluminum Flat Trailer with Tarp System
VIN 1E1H5Y28117RM41375

525
2006 East 48' x 102" Aluminum Flat Trailer with Tarp System
VIN 1E1H5Y2846RC39079

526
2005 East 48' x 102” Aluminum Flat Trailer with Tarp System
VIN 1E1H5Y2815RG35154

529
2004 48' x 102" Benson with Tarp System
VIN 5DMFABTB04M000387

529A
2003 Manac Conestoga Trailer
48' Trailer W/ tarp system,Trailer# 48406, Model # 15248901, VIN 2M512146036083801, inside dimensions 96" x 102", W/title, GVWR 76280, Max Concentrated Load 120,000 lbs, Good Condition!

530
2005 3 Bunk Log Trailer
VIN DPS0GASVE60163206

531
2003 3 Bunk Log Trailer
VIN DPS02ASVE30283202

531A
Log Trailer*
2 1/2 bunk, 40’

600
3-Strand Log Deck
10' x 26' x 48" steel wheels, electric Tulsa gear drive       NOTE All 600 lots are located at 7100 CR 407 Millersburg OH (Yoder Lumber's Buckhorn Plant)

601
4-Strand Unscrambler
12' x 7' x 5' high, chain type, electric drive. Located at 7100 CR 407 Millersburg OH

602
4-Strand Transfer Deck
11' 3" x 13' x 38" high, electric drive. Located at 7100 CR 407 Millersburg OH

603
HMC 2-Saw Trim Saw
Serial # 246-88, overall 21' x 8', with electric motor and drive. Located at 7100 CR 407 Millersburg OH

604
4-Strand Green Chain
112" x 37' x 18", electric drive, no chain. Located at 7100 CR 407 Millersburg OH

605
Live Roll Case
24" x 64' x 32", electric drive, 6 1/2" x 20" rolls, Located at 7100 CR 407 Millersburg OH

606
Belt Conveyor
24" x 26', 5" sides, electric drive, 1 1/2 3-phase motor. Located at 7100 CR 407 Millersburg OH

607
Klamath 7' RH Band Mill
With off belt, 24" weight strain. Located at 7100 CR 407 Millersburg OH
Photo Gallery
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend





Other Sales by
This Company

Oct 1
Middlebury, IN

Sponsored Links

Yoder Lumber Charm Location and Excess Assets to Successful Ongoing Operation

Bright Star Realty and Auctions, INC

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone:
Sale Location
3799 County Road 70
Millersburg, OH 44654
Sale Dates and Times
Thursday Feb 4, 2021 Completed
Sale Terms and Conditions

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

 
Listing Details
Sawmill liquidation including 2 Mack Tractors with sleepers, 3 Volvo tractors with sleepers, 2- Cleereman carriages, Brewco run-around resaw system, 6' Salem head rig, Morbark Chip Pac, Precision Chipper, Jeffery Hammer Mill, 2- knucklebooms etc.This will be a very large auction with late-model well-maintained equipment in Excellent Condition! Live phone and online bidding available. Contact Myron @ 574-229-4341 to consign equipment for free marketing!

00
Information Lot
You are  welcome to inspect equipment week of sale from 8 to 5. Starting the auction with lot # 10 at 9:00 AM, will sell in catalog order. Buyers have 30 days to remove equipment (small items by Saturday February 6th at 5 PM) Free loadout on smalls Friday and Saturday from 8 to 5. Rigging is available call Eugene 260.350.8953

10
Threaded Rod
1/4"-1 1/4", all rods underneath stairs approx. 40 pcs. 3" - 3' NOTE lot # 10 - 79 are located in the maintenance building

11
Wooden Bolt and Bin Contents
Bolts, nuts, and washers

12
20 and 6 Ton Bottle Jacks
.

13
Black and Decker Grinder with Sharpening Head
.

14
Black and Decker Grinder with Sharpening Head
.

15
Bostitch Nailers
Roofing nailer and staple gun

16
Marquette 32-150 Battery Charger
.

17
Makita Cutoff Saw
.

18
Banding Tools
.

19
Steel Vise
.

20
2 1/2" Superrench
.

21
Pulley Puller
.

22
Porter Cable Portable Bandsaw
44 7/8" bands

23
Grinding and Buffing Wheels
16 total different sizes

24
Black and Decker 6" Bench Grinder
1/2" arbor

25
Baldor Bench Grinder/Buffer
Cat. No. 1021 W, 1.5 HP, 3 phase

26
Parts Washer
22" x 44" x 40" high

27
Steel Rack on Wheels
55" x 8' x 74" high

27A
5-Drawer File Cabinets
2 total

28
Steel Rack
36" x 36" x 27" high

29
Steel Rack and Contents
25" x 25" x 42" high

30
Steel Rack and Line Shafts
1 1/8"-3" rods, 26"-50" long

31
Ruger HP-1 Floor Jack
Serial # C-4076, 2000 lb. lift

32
Miller 200 Amp Portable AC/DC Welder
Serial # HD709488, not in working order, has engine missing

33
Lincoln SA-200-F-163 Portable Welder
Serial # A640330, stick welder, works good

34
Miller 250 Welder
Serial # 70-549559, single phase

35
Miller CP250TS Welder
Serial # T469568, 3 phase, tank not included

36
Pallet of Wrenches, Screwdriver, Chargers, etc.
.

37
Pallet of Chains, Power Tools, Jumper Cables, Tape Measures, etc.
.

38
Steel Welding Table with Wilton 500 Steel Vise
48" x 96" x 32" high, 3/4" steel top, has rack on one end to hang tools, etc.

39
Buffalo 1340 Mighty Turn Engine Lathe
Serial # 13002, 3 phase

40
Ellis 1600 Metal Cutting Band Saw
Serial # 16001849

41
Steel Cart on Wheels
61" x 24 1/2"

42
Steel Cart on Wheels and Contents
27 1/2" x 17 1/2 "

43
Steel Cart Loaded with Sockets, Air Impacts, Wrenches, Screwdrivers, etc.
25" x 36" x 34" high on wheels with 2 drawers

44
Rockwell/Delta 6 1/2" Table Saw
.

45
Miscellaneous Steel Adjustable Stands and Sawhorses
.

46
60" Wooden Stepladder
.

47
Stihl FS 88 Weedeater
Works

48
Ellis 9000 Drill Press with Foot Pedal
Serial # 90D00151, 1/8" - 3/4" chuck, includes 4 5/8" vise bit rack and all bits, variable speed

49
Pallet of Steel Bars, Regulators, Air Hammer, Electric Drill, etc.
.

50
Pallet of Welding Rods, Light Bulbs, Grease Gun, etc.
.

51
Pallet of Welding Rods and Nails
.

52
Pallet of Hydraulic and Gas Fittings
.

53
Pallet of Drill Bits, Wrenches, etc.
.

54
Pallet of Pry Bars, Hole saw, Levels, etc.
.

55
Pallet of Bolt Bins
Filled with bolts, nuts, washers, gas fitting, snap rings, screws, etc.

56
Pallet of Pipe
.

57
Pallet of Electric Motors
Gear oil, etc.

58
Pallet of Air Hoses, Wire, Extension cords, etc.
.

59
Pallet of Brooms, Sledge, etc.
.

60
Pallet of Grinding Wheels, etc
.

61
Pallet of Belts for Conveyors
5 1/2"-24" wide

62
Pallet of Bostitch Staples, Plastic, etc.
.

63
Fan and Miscellaneous Pallet
.

64
Air Tank, Heater, etc.
.

65
Chain, Battery, etc.
Does not include rosserhead.

66
Wooden Bin filled with Chain Parts, Cylinders, etc.
.

67
Steel Rack with Electric Supplies
63" x 14" x 74" high

68
Rack with Wire, Extension Cords, etc.
18 1/2" x 36" x 72" high

68A
Bolt Bin*
112 bins of bolts and nuts, 1/4”-3/4”

69
2-sided Steel Bin with Black Pipe Fittings
24' x 37" x 84" high

70
All Belts Hanging on Wall and from Ceiling
Lots of different sizes, 100+ belts

71
Sprockets and Pulleys
Lots of new sprockets and pulleys, this lot is located upstairs

72
Electronic Parts, etc.
.

73
13 New Browning Bushings and Miscellaneous Parts
.

74
New Bearings, Valves, etc.
Includes Browning bearings, fiberglass vibrating conveyor paddles, and vibrating conveyor drive .

75
Bearings, Sprockets, Cylinders, etc.
.

76
Used Sprockets
.

77
Chain Parts and Miscellaneous
.

78
Round Bolt Bin with Bolts, Nuts, etc.
.

79
Sprockets, Pulleys, Cylinders, etc.
.

80
32" Dayton Fan On Stand
1/2 HP, 2 speed

81
32" Fan On Stand
1/4 HP

82
32" Lasko Fan On Stand
1/4 HP

83
21" Dayton Fan On Stand
1/4 HP

84
21" Dayton Fan On Stand
1/4 HP

85
21" Dayton Fan On Stand
1/4 HP

86
Electric Heaters
.

87
New Air Filters
9- 24" x 24" x 1"  13- 12" x 12" x 1"

88
Banding Cart
With 5/8" plastic banding

89
Banding Cart
With 3/4" metal banding

90
Banding Clips
1/3 of a 5 gallon bucket

91
Banding Tool
JK 1219, 509045

92
Orgapack Banding Tool
47/21809

93
Orgapack Banding Tool
CH 43, 45134

94
Crimping Tools
.

95
Banding Tools
Tightener and crimper

96
Signature Frostless 22 Refrigerator and 2 Chairs
.

97
Rubber Maid Utility Cart
1 yd. 2000 lb. max

98
Air Hoses and Cords
Includes 4 air nozzles

99
Scoop Shovels
.

100
Snow Shovels
.

101
24" Push Brooms
.

102
Conduit Benders
8" and 12"

103
Conduit Benders
10" and 6"

104
Cant Hooks, Axe and Sledge Hammers
.

105
Lasers
Lasalign model 8301-60-AF, Laharco model 8202-60, Conneyus model 090-54

106
3 Grease Guns, SS Fish Tape, Padlocks and Penetrating Oil
.

107
Jockey Grinder With Milwaukee Drill
.

108
Hanchet Jockey Grinder With Milwaukee Drill
Size E54, shop # 646P

109
Chicago Air Impacts
.

110
Makita 16" Electric Chainsaw
.

111
Sharpening Tool With Black and Decker Grinder
.

112
Tecomec FL 136 Grinder
LR 36941, serial # 061999

113
Hammer, Pipe Wrench and Misc. Hand Tools
.

114
Skate Rollers
13" wide approx. 25', no legs

115
Falk Motor Reducer
Model 114E406A1, ratio 198.1

116
Electric Motor
40 HP

117
Falk Gear Reduction
Model 102-43Z2-06A5, 10 HP, ratio 11.12, Westinghouse motor, 10 HP, 3 phase

118
Hydraulic Unit
15 HP

119
Steel Cart On Wheels
4' x 10'

200
Morbark Model 648 Rosserhead Style Debarker
Includes operators cab and all controls, electric over hydraulic, 480/ 3 phase, 50 HP motor for head, installed new in 2007, very good condition, 1st lot of an entirety

201
Starter for Debarker
.

201A
Capacitor and and Cutoff Switch for Debarker
.

202
4-Strand Log Deck
11'6" x 19' with 66" steel legs with stop and load, PEER chain, electric drive

203
Webster Vibrating Conveyor
30" pan x 30' long with 6" sides, electric drive, located underneath debarker, 18" off ground

204
DeMUTH Belt Conveyor
Model BC 500, serial 7667, 28" x 27', 23" belt, 36" steel legs, electric drive

205
Morbark Log Trough
52 1/2" x 30' with 47" steel legs, 12" MAC chain, hydraulic drive

206
Entirety Lot 200-205
With 10% raise

206A
Rosserhead Debarker Head
.

207
MDI TWA-200-HD Metal Detector
Hydraulic Drive, 17' through feed belt conveyor, 24" belt

208
Morbark Log Trough with Dual Kickers
52 1/2" x 25' with 12" MAC chain, hydraulic drive

209
5-Strand Transfer Deck with Load Off
13' x 14'6" with 26" steel legs on one end, other end mounted on concrete wall

210
Morbark Hydraulic Pack
Was used on lots 205, 207, 208, and 209

211
Webster Vibrating Conveyor
Model FSH, 24" pan, 6" sides, 27' long, 18" legs

212
Webster Vibrating Conveyor
Model FSLk 12" pan, 6" sides, 35' long, does not include 60" Fiberglass section, 30" section with dust holes, 18" off ground

213
CR-85 Electric Metal Detector and 60" Fiberglass Section
.

214
Jeffrey 34WB Top Feed Hammer Mill
Serial # 119790, does not include electric motor

214A
Baldor Soft Start
Was used on lot # 214

214B
125 HP Electric Motor
Was used on lot # 214, 3 phase, 445U frame, 230/460 V

214C
Capacitor and Cutoff Switch for Hammer Mill
.

215
Steel Up and Over Step
Top platform is 36" wide and 36" off ground

216
Cleereman Linear Positioning Carriage With 4 Brownsville Turners
Serial # 42-783 02, electric over hydraulic controlled, linear positioning, includes cab and controls, very good condition, 1st lot of an entirety

216A
Silvatech Scanning System
Includes Silvatech setworks in cab.

217
FSC Hydraulic Unit for Cleereman Carriage
Model PU30H80G-630-0797, serial # 2615-2498

218
Jacobson Engineering Feed and Drive
Model PX 8065P2 Y RL 9, serial # D702816, Input HP 125, Input RPM 1170/2000, HP Rating 400 HP at 1170 RPM,

219
Track and Frame
60 " x 60'

220
Entirety Lot 216-219
With 10% raise

221
Cleereman M36 36" Bar Type Log Turner
Serial # 3618-12902, very good condition

222
4-Strand Log Deck with Stop and Load
19' x 26', hydraulic Tulsa gear drive, 38" steel legs

222A
Double A Hydraulic Unit
15 HP, was used for log turner

223
Parts for Cleereman Carriage
.

224
Dust Blower to Cyclone
24", 10 HP electric motor

225
Cyclone
6', 32" diameter

226
6' Salem Head Rig
Serial # 83847-79, weight strain, good meat on wheels approx 1 1/4", does not include electric motor, good condition

226A
S-Trac Soft Start
Was used on lot # 226

226B
Lincoln 200 HP Electric Motor
Was used on lot # 226, 1785 RPM, Frame 445T

226C
Capacitor and Cutoff Switch for Head Rig
.

227
Mellott Drop Belt Conveyor
13' x 24" electric drive, air cylinder

228
Enterprise Live Roll Case
40" x 22' with 8 1/2" x 30" rolls

229
Guards
2-6', 1-7'

230
4-Strand Angled Transfer Deck
102" x 16' electric drive

231
Crosby 4" x 42" Edger
Serial # 29041, 100 HP electric motor, includes infeed/outfeed, hydraulic pack, lasers, tailing device setup for cutting 1/4 sawn

231A
Allis Chalmers Electric Motor
100 HP, 1770 RPM, frame 405T

232
Heaters
All heaters hanging from ceiling, total of 4

233
Edger Blades
20", total of 6

234
Chain Slab Drag
12' x 18' electric drive

235
5-Strand Grading Deck
C55B Roof Top Chain, 13' x 30', electric drive, does not include roll cases underneath

236
Spiral Roll Case Underneath Grading Deck
36" x 20', electric drive

237
Pop Up Roll Case Underneath Grading Deck
Live rolls 32" x 24', includes lift table

238
Drop Roll Case
12" x 19'

239
Crosby Trim Saw
Serial # 29040, 2-saw, 6'-17', 20" blades

240
Roll Case
32" x 23' with 8 1/2 " x 24" roll includes electric drive, 20" steel legs

241
Spiral Roll Case
41" x 16' with 8 1/2" x 30" rolls, no drive

242
4-Strand Green Chain
10' x 100' with 26" steel legs, popup on feed system, electric drive, C55B Roof Top Chain, chain is new

243
Lumber Cart
46" wide

243A
Lumber Cart
46" wide

244
Lumber Cart
91" x 38", wheels do not swivel, 16" off ground

245
Lumber Cart
91" x 38", wheels do not swivel, 16" off ground

246
Lumber Cart
91" x 38", wheels do not swivel, 16" off ground

247
Lumber Cart
91" x 38", wheels do not swivel, 16" off ground

248
Lumber Cart
91" x 38", wheels do not swivel, 16" off ground

249
Lumber Cart
91" x 38", wheels do not swivel, 16" off ground

250
Lumber Cart
91" x 38", wheels do not swivel, 16" off ground

251
Lumber Cart
91" x 38", wheels do not swivel, 16" off ground

252
Lumber Cart
91" x 38", wheels do not swivel, 16" off ground

253
Lumber Cart
91" x 38", wheels do not swivel, 16" off ground

254
Lumber Cart
91" x 38", wheels do not swivel, 16" off ground

254A
Lumber Cart
47" x 70" x 12"

254B
Lumber Cart
47" x 70" x 12"

254C
Lumber Cart
47" x 70" x 12"

255
Lumber Cart
47" x 70" x 12"

256
Air Tank
24" diameter, 84" high, These next lots are in the basement of the main sawmill.

257
Air Tank
42" diameter, 96 " long

258
Belt Conveyor
20" x 30' with 13" belt, electric drive

259
Webster FSH Vibrating Conveyor
Serial # 942-1517-1, 18" pan, 6" sides, 18" off ground, 55' long, does not include fiberglass section, 72" section with dust holes, electric drive

260
MDI W/CR-85 Metal Detector with 60" Fiberglass Section
.

261
Belt Conveyor
11" x 25' with 10" belt, electric drive

261A
Belt Conveyor
10" x 92" with 5 1/2" belt, 3 sides

262
Morbark 586E Chippac
Serial # 861, 6 knife with blower, 58", 6' x 6' screen in good condition, does not include electric motor

262A
Baldor Soft Start
Was used on lot 262

262B
Morbark Two Van Blower System
Includes electric motor, in good condition, was used up untill they installed the bin system

262C
Lincoln 125 HP Electric Motor
Was used on lot 262, frame 405T, 1775 RPM, 3 phase

262D
Capacitor and Cutoff Switch for Chipper
.

263
Paddle Conveyor on Incline
19" x 31"

263A
All Steel Slide Pans In Basement
Does not include any structural steel

264
Peerless WS 14 Unit Sawdust Bin
Approx 16' square.

265
Honeyville Bucket Elevator
M.43-24, serial # 94904A, 70' to platform

266
Sheldon Machine Co. Lathe
1/2 HP motor, 1 phase

267
Parts for Barn Sweep
.

268
Weg Electric Motor
50 HP, 3 phase, 326 TZ frame, 1775 RPM

269
Allis Chalmers Electric Motor
125 HP,3 phase, 1770 RPM, 405T frame

270
Howell Electric Motor
15 HP, 3 phase, 1150 RPM, 324U frame

271
Allis Chalmers Electric Motor
30 HP, 3 phase, 1750 RPM, 326U frame

272
Allis Chalmers Electric Motor
30 HP, 3 phase, 1750 RPM, 326U frame

273
Baldor Electric Motor
30 HP, 1725 RPM, 3 phase, 286T frame

274
Siemens-Allis Electric Motor
15 hip, 1745 RPM, 3 phase, 254T frame

275
Lima Electric Motor
10 HP 1800 RPM, 3 phase, 256U frame

276
General Electric Motor
5 HP, 1150 RPM, 3 phase

277
Electrical Supplies
Wire, shut offs, conduit, etc.

278
Conveyor Belts, Fiberglass Pieces, etc.
.

279
Hammers for Hog
.

280
Chipper Knives
.

281
8-Groove Pulley and Belts
21 1/4" pulley for 5" shaft

281A
Chipper Knives
5-set

282
Electrical
.

283
Electric Motors
Total of 8, 1/2 -7 1/2 HP

284
Electrical Supplies
.

285
Conduit
Over 50 pieces, 3/4"-1 1/2"

286
Wire
All wire on wall

287
Air Tank
30" diameter x 84" long

288
Sullair 25H Air Compressor
Serial# 81XN10-3430, 8561 hours, series 10

289
Allen Bradley Electric Panel with Starters
 38 starters

289A
480V Main Disconnect
.

289B
480V Main Disconnect
.

289C
480V Main Disconnect
.

289D
All Wiring in Building not Already Sold
Lighting, conduit, etc. 

290
Hanchett 109 Stretcher Roll
Serial # 1303, type 14

291
Grinding Wheels and Accessories in Wooden Cabinet
.

292
Hanchett Left-Hand Band Saw Grinder
Serial # 1349, size A230, includes blower

293
Hanchett 14" Band Saw Blade Shear
Serial # 1172

294
Thomson-Lane Saw Guide Block Grinder
Serial # 936, model B

295
Blower
1 HP electric motor

296
Chipper Knives
5 set

297
IKS 4080LP Knife Grinder
Serial # 1003

298
Bands for Band Mill
Total of 3, marked 'useable last resort'

298A
Band for Head Rig
38' 8" x 11", brand new

298B
Band for Head Rig
38' 8" x 11", brand new

299
Band for Head Rig
38' 8" x 11"

300
Band for Head Rig
38' 8" x 11"

301
Band for Head Rig
38' 8" x 11"

302
Band for Head Rig
38' 8" x 11"

303
Band for Head Rig
38' 8" x 11"

304
Band for Head Rig
38' 8" x 11"

305
Cleereman Carriage
Serial # 36-748 01, 36", 3 headblock, electric over air setworks, includes cab and controls, 1st lot of an entirety

306
Hydraulic Unit
50 HP electric motor, feed for drive

307
Cleereman Drive
.

308
Track and Frame
52" x 50'

309
Edmiston's Husk
Serial # VHE-208E, does not include electric motor, 56" blade

309
Edmiston's Husk
Serial # VHE-208E, does not include electric motor, 56" blade

310
4-Strand Log Deck
10' x 20' with stop and load, electric Tulsa gear drive,

311
Mellott #5 Log Turner
Includes controls

311A
Hydraulic Unit for Log Turner
15 HP electric motor

311B
Marathon 150 HP Electric Motor
Was used on lot 309, frame 445T

312
Entirety Lot 305-311B
With 10% raise

312
Entirety Lot 305-311B
With 10% raise

312A
56" Circular Saw Blade
F8 S Tooth

312B
56" Circular Saw Blade
F8 S Tooth

312C
56" Circular Saw Blade
F8 S Tooth

312D
Spare Parts for Circular Saw Blades
Everything in wooden cabinet, lot of brand new Simonds accessories

366A
Fromm A383 Pneumatic Sealless Combination Tool For 1-1/4" Steel Strapping
.

313
Edmiston's Drop Belt Conveyor
10' x 32' with 18" belt, electric drive with air cylinder

367
Adjustable Stands
Total of 5

314
Roll Case
32" x 152" with 6 1/2 x 20" rolls, electric drive

315
4-Strand Transfer Deck
116" x 17', C55B Roof Top chain, electric drive

316
Belt Conveyor
25" x 21" with 24" belt, electric drive

317
Brewco B-1600 Grade Run-around Resaw System
Serial # BBC-0106, The Wolf, with 5-way board separator , nice clean machine, includes complete runaround and hydraulic unit

318
Roll Case
32" x 39' with 20" x 6 1/2" rolls, 26" steel legs, electric drive

319
Transfer Deck with Jump Chain
10'6" x 11' electric Tulsa gear drive

320
Crosby 4" x 36" Edger
Serial 4656T, 2 moveable blades, with in feed and laser, includes hydraulic unit

321
4-Strand Transfer Deck
99" x 160", 18" steel legs, electric drive, C55B Roof Top chain

322
4-Strand Transfer Deck
93" x 150" with 22" steel legs

323
Roll Case
29" x 27" with 27" steel legs, 18" x 4 1/2" rolls

324
4-Strand Green Chain
10'2" x 82', one side has 17" steel legs, the other has 43" steel legs, electric drive, C55B Roof Top chain

325
Precision Husky 58" Chipper
6-knife, does not include electric motor, includes pipe to cyclone, 1st lot of an entirety

325A
125 HP Electric Motor
Was used on lot 325, more info coming

326
6' x 6' Rotary Chipper Screen
.

327
60" Cyclone
.

328
Entirety Lot 325-327
With 10% raise

329
Belt Conveyor
17' x 13" electric drive

330
Morbark Chip Blower
Serial # 12047GGJ, 10 HP electric motor

331
Honeyville HF26 Sawdust Blower
75 HP electric motor, 60"

332
96" Cyclone
Includes dust pipe from blower

333
Webster Vibrating Conveyor
12" pan, 6" sides x 60' long with 60" fiberglass section, 7.5 HP electric motor, located underneath circular saw to chipper

334
MDICCW-78 Metal Detector
Serial # 71284

335
Webster Vibrating Conveyor
12" pan, 4 sides, 90' long, 17" off floor, located underneath green chain

336
Belt Conveyor
17" x 25' with 11 1/2" belt, 4" sides, electric drive

337
Belt Conveyor
15" x 18', 3 sides, 10" belt

338
Lumber Cart
30" x 46"

339
Lumber Cart
30" x 46"

340
Lumber Cart
30" x 46"

341
Lumber Cart
30" x 46"

342
Lumber Cart
30" x 46"

343
Lumber Cart
16" x 46"

344
Lumber Cart
16" x 46"

345
Lumber Cart
16" x 46"

346
Lumber Cart
16" x 46"

347
Lumber Cart
16" x 46"

348
Lumber Cart
16" x 46"

349
Lumber Cart
16" x 46"

350
Lumber Cart
16" x 46"

351
Lumber Cart
16" x 46"

352
Lumber Cart
16" x 46"

353
Lumber Cart
16" x 46"

354
Lumber Cart
16" x 46"

355
Lumber Cart
16" x 46"

356
Lumber Cart
16" x 46"

357
Lumber Cart
16" x 46"

358
Lumber Cart
16" x 46"

359
Lumber Cart
16" x 46"

360
Hanchett A220 LH Saw Sharpener
serial # 1260

361
Banding Cart
.

362
Banding Cart
.

363
Banding Tools
.

364
1 1/4" Steel Banding
23 rolls

364A
1 1/4" Banding Clips
Approx. 1000 pieces

365
Fromm A383 Pneumatic Sealless Combination Tool For 1-1/4" Steel Strapping
.

366
Fromm A383 Pneumatic Sealless Combination Tool For 1-1/4" Steel Strapping
Model A26B1035, serial # 2651630, size 114

367
Fromm A383 Pneumatic Sealless Combination Tool For 1-1/4" Steel Strapping
.

367A
Steel Banding Cart and Banding Tools
.

368
Shop Built Hydraulic Press
.

369
Speed Reducer for 2 1/2" Shaft
.

370
Shop Built Buffing Machine for Brewco Band Wheels
.

371
Hanchett 413 LH Saw Sharpener
Serial # 228

372
Cooks Cat Claw Sharpener
.

373
Brewco Tooth Setter
.

374
Silvatech Log Scanning System
Complete set with computers and everything

375
SCMI M-2 Ripsaw
Serial # 8650475

375A
Patz Belt Conveyor
17" x 22' electric drive, has some damage

376
Grutter 1606 Left Hand Cut Off Saw
Serial # 23953, includes infeed and outfeed, 24" blade

376A
Westinghouse Electric Motor
150 HP, 3 phase

376B
Grutter Upcut Saw
Model 1604, serial # 25950-R. Needs Work

377
Patz Belt Conveyor
18" x 20'

378
LN2 Log Turner
.

379
Belt Conveyor
21" x 17' electric drive

380
Conveyor
12" x 50', not assembled

381
Montgomery 34HD50 Blo Hog Grinder
Serial # 1344, top feed, does not have a fan in the blower

381A
Webster Vibrating Conveyor
60' x 18" with 10" sides, electric motor, 20 HP Daylor

381B
New Anvil Set For Blohog
.

382
All Dust Pipe
.

382A
Lincoln Welder 9413
Stick welder, Ranger 8, works good, 2215 hours

382B
Skid of Electrical Supplies
.

383
Air Hoses and Air Nozzles
.

384
Wheelbarrows and Stepladder
.

385
10 Shovels
.

386
Cant Hooks and Concrete Placers
.

387
10 24" Push Brooms
.

388
Conveyor Belts, Grease Gun, Grinding Wheels, and Hydraulic Hoses
.

389
ACME Junior Circular Saw Sharpener
1/3 HP Baldor electric motor, serial # 903

390
Skid of Saw Blades
12" and 20" with 4" arbor, 16" with 3 1/2" arbor, 24" with 1" arbor

391
Air Hoses, Gas Cans, Electric Chain Saw, Grease Guns
.

392
Heavy Duty Vise, Saw Blades, 7" Metal Cutting Wheel, Electric Motor
.

393
11 Electric Heaters
.

394
4" Rockwell/Delta Joiner
.

395
Tire Chains
.

396
21" and 32" Electric Fans On Stand
.

397
Round Buffing Table
32" diameter, 1/2 HP electric motor

398
Wood-Mizer Band Sharpener
.

399
Dust Blower On 55 Gallon Drum
1 HP motor

400
Skid Of Parts For Hammer Mill
.

401
Rooftop Chains, 9" Rollers, 10" Conveyor Belts
.

402
Bolt Bin
35" x 42" x 12", 56 bins, no contents

403
Pallet of Miscellaneous Belts
.

500
2018 Volvo VNL Truck, VIN # 4V4NC9EJ6JN894663
Year: 2018
Make: Volvo
Model: VNL
Vehicle Type: Truck
Mileage:281,866
Plate:
Body Type:
Trim Level:
Drive Line: 6x4
Engine Type: L6, 12.8L
Fuel Type: Diesel
Horsepower: 475-524HP
Transmission:
VIN #: 4V4NC9EJ6JN894663

Features and Notes: , Volvo D13 500 HP engine, 12 speed transmission AT02612F, automatic, 281,866 miles, 3.08 ratio, 40,000 lb. steer tires are new, DOT approved, clean one owner truck in excellent condition, maintenance records available on request
 

501
2018 Mack Anthem Truck, VIN # 1M1AN4GY6JM001169
Year: 2018
Make: Mack
Model: Anthem
Vehicle Type: Truck
Mileage: 227,402
Plate:
Body Type:
Trim Level:
Drive Line: 6x4
Engine Type: L6, 13.0L
Fuel Type: Diesel
Horsepower: 435HP
Transmission:
VIN #: 1M1AN4GY6JM001169

Features and Notes: MP8-505E MACK engine, 3.08 ratio, 40,000 lb. clean, well maintained, DOT approved, one owner truck in very good condition, maintenance records available on request

501A
2016 Mack CXU613 Truck, VIN # 1M1AW21Y3GM075779
Year: 2016
Make: Mack
Model: CXU613
Vehicle Type: Truck
Mileage: 423,300
Plate:
Body Type:
Trim Level:
Drive Line:
Engine Type: L6, 12.8L
Fuel Type: Diesel
Horsepower:
Transmission: automatic
VIN #: 1M1AW21Y3GM075779

Features and Notes:  DOT approved, 40,000 lb.clean one owner truck in very good condition, maintenance records available on request
 

502
2016 Volvo VNL Truck, VIN # 4V4NC9EJ7GN956953
Year: 2016
Make: Volvo
Model: VNL
Vehicle Type: Truck
Mileage: 469,030
Plate:
Body Type:
Trim Level:
Drive Line: 6x4
Engine Type: L6, 12.8L
Fuel Type: Diesel
Horsepower: 475-524HP
Transmission: automatic 
VIN #: 4V4NC9EJ7GN956953

Features and Notes: Volvo D13 500 HP engine, ECO-Torque Volvo automatic transmission AT02612D, DOT approved, 3.08 ratio, 40,000 lb. clean one owner truck in good working order, engine light is on has something to do with DEF system.

503
2016 Volvo VNL Truck, VIN # 4V4NC9EJ0GN974159
Year: 2016
Make: Volvo
Model: VNL
Vehicle Type: Truck
Mileage: 476,366
Plate:
Body Type:
Trim Level:
Drive Line: 6x4
Engine Type: L6, 12.8L
Fuel Type: Diesel
Horsepower: 475-524HP
Transmission:
VIN #: 4V4NC9EJ0GN974159

Features and Notes: Volvo D13 500 HP, Eco-Torque Volvo Automatic transmission AT2612D, DOT approved, 2.47 direct drive, 40,000 lb. clean one owner truck in good condition, maintenance records available on request

504
2014 Volvo VHD Truck, VIN # 4V4KC9EH7EN165805
Year: 2014
Make: Volvo
Model: VHD
Vehicle Type: Truck
Mileage: 321,020
Plate:
Body Type:
Trim Level:
Drive Line: 6x4
Engine Type: L6, 12.8L
Fuel Type: Diesel
Horsepower: 425-474HP
Transmission:
VIN #: 4V4KC9EH7EN165805

Features and Notes: Volvo D13 435 HP, transmission FRO-16210B, 10 speed manual, 321,020 miles, DOT approved, 3.08 ratio, 40,000 lb. good working condition, maintenance records available on request

505
2013 Freightliner Coronado 132 Glider Truck, VIN # 3ALXFB007DDFD1804
Year: 2013
Make: Freightliner
Model: Coronado 132 Glider
Vehicle Type: Truck
Mileage: 778,075
Plate:
Body Type:
Trim Level:
Drive Line:
Engine Type: Reman Fitzgerald Glider Pre-emission
Fuel Type: 
Horsepower:
Transmission: 13 speed
VIN #: 3ALXFB007DDFD1804

Features and Notes: 13 speed manual, Reman transmission, new clutch, 2 Reman differentials and a Reman Fitzgerald Glider Pre-emission engine at 570,000 miles, DOT approved, 40,000 lb. good working order, clean truck, maintenance records available on request

505A
2005 Freightliner M2 106 Medium Duty Truck, VIN # 1FVACXDC75HU68586
Year: 2005
Make: Freightliner
Model: M2 106 Medium Duty
Vehicle Type: Truck
Mileage:  627,000 
Plate:
Body Type:
Trim Level:
Drive Line: 4x2
Engine Type: L6, 7.2L (439 CID)
Fuel Type: Diesel
Horsepower: 330HP
Transmission:
VIN #: 1FVACXDC75HU68586

Features and Notes: DOT approved, 6 speed manual

505B
2001 Freightliner Columbia 120 Truck, VIN # 1FUJA6CG71PJ03740
Year: 2001
Make: Freightliner
Model: Columbia 120
Vehicle Type: Truck
Mileage: 1,100,000
Plate:
Body Type:
Trim Level:
Drive Line: 6x4
Engine Type: L6, 12.7L (775 CID)
Fuel Type: Diesel
Horsepower:
Transmission:
VIN #: 1FUJA6CG71PJ03740

Features and Notes: Detroit 12 L Engine, Sleeper, Runs and Drives

506
1995 International 4900 Truck, VIN # 1HTSDAAN1SH635538
Year: 1995
Make: International
Model: 4900
Vehicle Type: Truck
Mileage:  771,912
Plate:
Body Type:
Trim Level:
Drive Line: 4x2
Engine Type: L6, 7.6L (466 CID)
Fuel Type: Diesel
Horsepower:
Transmission:
VIN #: 1HTSDAAN1SH635538

Features and Notes: , 6 speed manual, 24' 6" x 8' bed, runs and operates

507
2004 Ford Econoline Wagon Van, VIN # 1FBNE31L44HA78049
Year: 2004
Make: Ford
Model: Econoline Wagon
Vehicle Type: Van
Mileage: 244,510
Plate:
Body Type: 4 Door Van; Passenger
Trim Level: Base
Drive Line: RWD
Engine Type: V8, 5.4L (330 CID); SOHC 16V; EFI
Fuel Type: Gasoline
Horsepower: 235-260HP
Transmission:
VIN #: 1FBNE31L44HA78049

Features and Notes: 12 passenger, has some rust, runs and drives

510
Barko 160D Knuckleboom
On trailer, good tires delimber hookup, continuous swivel, new seat, hours unknown, runs and operates, ready for work

511
Peerless Timber Jack 217 OB Knuckleboom
Serial # CB1081, on trailer, good tires, one needs replaced, delimber hookup, heat, 4775 hours, continuous swivel, runs and operates

512
1987 Cat Model 518G Grapple Skidder
Serial # VO1551, Esco sorting grapple, Dual Arch, Winch, power shift, 23.1 x 26 tires, tires 20%, 21089 hours, open cab, runs and operates

513
1997 Morbark 22" Whole Tree Chipper
hours unknown, 600 HP, Cummins KTA600 Engine, Twin Disc clutch, clutch needs repair

514
Toyota Fork Lift
Model 02-3FGC30, serial # 3FGC3011062, 3 stage, side shift, 5700 lift, LP gas, does not run

515
Cat 525 Skidder Chains
.

516
John Deere 640G Skidder Chains
.

520
2006 Vanguard 53' Van Trailer
VIN 5V8A53206M605325

521
2005 Hyundai 53' Van Trailer
VIN 3H3V532C35T152027

522
2004 Wabash 53' Van Trailer
VIN 1JJV532W44L88609

522A
1997-53' Van Trailer
1997 Trailmobile, Model-01JA-1RAY, GVWR 65000, VIN 1PT01JAHXV6004682, Height 13' 6", Width 2.6M, sell W/title, Good Condition

522B
2004 53' Hyundai Van Trailer*
2004 Model# VP2530152AJS, VIN# 3H3V532C04T032040, GVWR 65000, trailer # 23554, Sells W/title, Good Condition

523
2003 53' Utility Van Trailer
VIN 1UYVS25333G097612

523A
2014 East 48' x 102" Flat Trailer with Tarp System
VIN 1E1H5Y289ER050388

523B
2012 East 48' x 102" with Tarp System
VIN 1E1H5Y281DRG47925

524
2007 East 48' x 102” Aluminum Flat Trailer with Tarp System
VIN 1E1H5Y28117RM41375

525
2006 East 48' x 102" Aluminum Flat Trailer with Tarp System
VIN 1E1H5Y2846RC39079

526
2005 East 48' x 102” Aluminum Flat Trailer with Tarp System
VIN 1E1H5Y2815RG35154

529
2004 48' x 102" Benson with Tarp System
VIN 5DMFABTB04M000387

529A
2003 Manac Conestoga Trailer
48' Trailer W/ tarp system,Trailer# 48406, Model # 15248901, VIN 2M512146036083801, inside dimensions 96" x 102", W/title, GVWR 76280, Max Concentrated Load 120,000 lbs, Good Condition!

530
2005 3 Bunk Log Trailer
VIN DPS0GASVE60163206

531
2003 3 Bunk Log Trailer
VIN DPS02ASVE30283202

531A
Log Trailer*
2 1/2 bunk, 40’

600
3-Strand Log Deck
10' x 26' x 48" steel wheels, electric Tulsa gear drive       NOTE All 600 lots are located at 7100 CR 407 Millersburg OH (Yoder Lumber's Buckhorn Plant)

601
4-Strand Unscrambler
12' x 7' x 5' high, chain type, electric drive. Located at 7100 CR 407 Millersburg OH

602
4-Strand Transfer Deck
11' 3" x 13' x 38" high, electric drive. Located at 7100 CR 407 Millersburg OH

603
HMC 2-Saw Trim Saw
Serial # 246-88, overall 21' x 8', with electric motor and drive. Located at 7100 CR 407 Millersburg OH

604
4-Strand Green Chain
112" x 37' x 18", electric drive, no chain. Located at 7100 CR 407 Millersburg OH

605
Live Roll Case
24" x 64' x 32", electric drive, 6 1/2" x 20" rolls, Located at 7100 CR 407 Millersburg OH

606
Belt Conveyor
24" x 26', 5" sides, electric drive, 1 1/2 3-phase motor. Located at 7100 CR 407 Millersburg OH

607
Klamath 7' RH Band Mill
With off belt, 24" weight strain. Located at 7100 CR 407 Millersburg OH
Gallery Images Loading, Please Wait...
  • Home
  • Advertise Your Estate Sale for $39
  • Hire an Estate Sale Company
  • Add Your Estate Sale Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Yoder Lumber Charm Location and Excess Assets to Successful Ongoing Operation
 Live Auction
 
Sale Date(s)
Thursday Feb 4, 2021 Completed
Sale Location

Millersburg, OH 44654
Company
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

Listing Terms and Conditions

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

 
Sawmill liquidation including 2 Mack Tractors with sleepers, 3 Volvo tractors with sleepers, 2- Cleereman carriages, Brewco run-around resaw system, 6' Salem head rig, Morbark Chip Pac, Precision Chipper, Jeffery Hammer Mill, 2- knucklebooms etc.This will be a very large auction with late-model well-maintained equipment in Excellent Condition! Live phone and online bidding available. Contact Myron @ 574-229-4341 to consign equipment for free marketing!

00
Information Lot
You are  welcome to inspect equipment week of sale from 8 to 5. Starting the auction with lot # 10 at 9:00 AM, will sell in catalog order. Buyers have 30 days to remove equipment (small items by Saturday February 6th at 5 PM) Free loadout on smalls Friday and Saturday from 8 to 5. Rigging is available call Eugene 260.350.8953

10
Threaded Rod
1/4"-1 1/4", all rods underneath stairs approx. 40 pcs. 3" - 3' NOTE lot # 10 - 79 are located in the maintenance building

11
Wooden Bolt and Bin Contents
Bolts, nuts, and washers

12
20 and 6 Ton Bottle Jacks
.

13
Black and Decker Grinder with Sharpening Head
.

14
Black and Decker Grinder with Sharpening Head
.

15
Bostitch Nailers
Roofing nailer and staple gun

16
Marquette 32-150 Battery Charger
.

17
Makita Cutoff Saw
.

18
Banding Tools
.

19
Steel Vise
.

20
2 1/2" Superrench
.

21
Pulley Puller
.

22
Porter Cable Portable Bandsaw
44 7/8" bands

23
Grinding and Buffing Wheels
16 total different sizes

24
Black and Decker 6" Bench Grinder
1/2" arbor

25
Baldor Bench Grinder/Buffer
Cat. No. 1021 W, 1.5 HP, 3 phase

26
Parts Washer
22" x 44" x 40" high

27
Steel Rack on Wheels
55" x 8' x 74" high

27A
5-Drawer File Cabinets
2 total

28
Steel Rack
36" x 36" x 27" high

29
Steel Rack and Contents
25" x 25" x 42" high

30
Steel Rack and Line Shafts
1 1/8"-3" rods, 26"-50" long

31
Ruger HP-1 Floor Jack
Serial # C-4076, 2000 lb. lift

32
Miller 200 Amp Portable AC/DC Welder
Serial # HD709488, not in working order, has engine missing

33
Lincoln SA-200-F-163 Portable Welder
Serial # A640330, stick welder, works good

34
Miller 250 Welder
Serial # 70-549559, single phase

35
Miller CP250TS Welder
Serial # T469568, 3 phase, tank not included

36
Pallet of Wrenches, Screwdriver, Chargers, etc.
.

37
Pallet of Chains, Power Tools, Jumper Cables, Tape Measures, etc.
.

38
Steel Welding Table with Wilton 500 Steel Vise
48" x 96" x 32" high, 3/4" steel top, has rack on one end to hang tools, etc.

39
Buffalo 1340 Mighty Turn Engine Lathe
Serial # 13002, 3 phase

40
Ellis 1600 Metal Cutting Band Saw
Serial # 16001849

41
Steel Cart on Wheels
61" x 24 1/2"

42
Steel Cart on Wheels and Contents
27 1/2" x 17 1/2 "

43
Steel Cart Loaded with Sockets, Air Impacts, Wrenches, Screwdrivers, etc.
25" x 36" x 34" high on wheels with 2 drawers

44
Rockwell/Delta 6 1/2" Table Saw
.

45
Miscellaneous Steel Adjustable Stands and Sawhorses
.

46
60" Wooden Stepladder
.

47
Stihl FS 88 Weedeater
Works

48
Ellis 9000 Drill Press with Foot Pedal
Serial # 90D00151, 1/8" - 3/4" chuck, includes 4 5/8" vise bit rack and all bits, variable speed

49
Pallet of Steel Bars, Regulators, Air Hammer, Electric Drill, etc.
.

50
Pallet of Welding Rods, Light Bulbs, Grease Gun, etc.
.

51
Pallet of Welding Rods and Nails
.

52
Pallet of Hydraulic and Gas Fittings
.

53
Pallet of Drill Bits, Wrenches, etc.
.

54
Pallet of Pry Bars, Hole saw, Levels, etc.
.

55
Pallet of Bolt Bins
Filled with bolts, nuts, washers, gas fitting, snap rings, screws, etc.

56
Pallet of Pipe
.

57
Pallet of Electric Motors
Gear oil, etc.

58
Pallet of Air Hoses, Wire, Extension cords, etc.
.

59
Pallet of Brooms, Sledge, etc.
.

60
Pallet of Grinding Wheels, etc
.

61
Pallet of Belts for Conveyors
5 1/2"-24" wide

62
Pallet of Bostitch Staples, Plastic, etc.
.

63
Fan and Miscellaneous Pallet
.

64
Air Tank, Heater, etc.
.

65
Chain, Battery, etc.
Does not include rosserhead.

66
Wooden Bin filled with Chain Parts, Cylinders, etc.
.

67
Steel Rack with Electric Supplies
63" x 14" x 74" high

68
Rack with Wire, Extension Cords, etc.
18 1/2" x 36" x 72" high

68A
Bolt Bin*
112 bins of bolts and nuts, 1/4”-3/4”

69
2-sided Steel Bin with Black Pipe Fittings
24' x 37" x 84" high

70
All Belts Hanging on Wall and from Ceiling
Lots of different sizes, 100+ belts

71
Sprockets and Pulleys
Lots of new sprockets and pulleys, this lot is located upstairs

72
Electronic Parts, etc.
.

73
13 New Browning Bushings and Miscellaneous Parts
.

74
New Bearings, Valves, etc.
Includes Browning bearings, fiberglass vibrating conveyor paddles, and vibrating conveyor drive .

75
Bearings, Sprockets, Cylinders, etc.
.

76
Used Sprockets
.

77
Chain Parts and Miscellaneous
.

78
Round Bolt Bin with Bolts, Nuts, etc.
.

79
Sprockets, Pulleys, Cylinders, etc.
.

80
32" Dayton Fan On Stand
1/2 HP, 2 speed

81
32" Fan On Stand
1/4 HP

82
32" Lasko Fan On Stand
1/4 HP

83
21" Dayton Fan On Stand
1/4 HP

84
21" Dayton Fan On Stand
1/4 HP

85
21" Dayton Fan On Stand
1/4 HP

86
Electric Heaters
.

87
New Air Filters
9- 24" x 24" x 1"  13- 12" x 12" x 1"

88
Banding Cart
With 5/8" plastic banding

89
Banding Cart
With 3/4" metal banding

90
Banding Clips
1/3 of a 5 gallon bucket

91
Banding Tool
JK 1219, 509045

92
Orgapack Banding Tool
47/21809

93
Orgapack Banding Tool
CH 43, 45134

94
Crimping Tools
.

95
Banding Tools
Tightener and crimper

96
Signature Frostless 22 Refrigerator and 2 Chairs
.

97
Rubber Maid Utility Cart
1 yd. 2000 lb. max

98
Air Hoses and Cords
Includes 4 air nozzles

99
Scoop Shovels
.

100
Snow Shovels
.

101
24" Push Brooms
.

102
Conduit Benders
8" and 12"

103
Conduit Benders
10" and 6"

104
Cant Hooks, Axe and Sledge Hammers
.

105
Lasers
Lasalign model 8301-60-AF, Laharco model 8202-60, Conneyus model 090-54

106
3 Grease Guns, SS Fish Tape, Padlocks and Penetrating Oil
.

107
Jockey Grinder With Milwaukee Drill
.

108
Hanchet Jockey Grinder With Milwaukee Drill
Size E54, shop # 646P

109
Chicago Air Impacts
.

110
Makita 16" Electric Chainsaw
.

111
Sharpening Tool With Black and Decker Grinder
.

112
Tecomec FL 136 Grinder
LR 36941, serial # 061999

113
Hammer, Pipe Wrench and Misc. Hand Tools
.

114
Skate Rollers
13" wide approx. 25', no legs

115
Falk Motor Reducer
Model 114E406A1, ratio 198.1

116
Electric Motor
40 HP

117
Falk Gear Reduction
Model 102-43Z2-06A5, 10 HP, ratio 11.12, Westinghouse motor, 10 HP, 3 phase

118
Hydraulic Unit
15 HP

119
Steel Cart On Wheels
4' x 10'

200
Morbark Model 648 Rosserhead Style Debarker
Includes operators cab and all controls, electric over hydraulic, 480/ 3 phase, 50 HP motor for head, installed new in 2007, very good condition, 1st lot of an entirety

201
Starter for Debarker
.

201A
Capacitor and and Cutoff Switch for Debarker
.

202
4-Strand Log Deck
11'6" x 19' with 66" steel legs with stop and load, PEER chain, electric drive

203
Webster Vibrating Conveyor
30" pan x 30' long with 6" sides, electric drive, located underneath debarker, 18" off ground

204
DeMUTH Belt Conveyor
Model BC 500, serial 7667, 28" x 27', 23" belt, 36" steel legs, electric drive

205
Morbark Log Trough
52 1/2" x 30' with 47" steel legs, 12" MAC chain, hydraulic drive

206
Entirety Lot 200-205
With 10% raise

206A
Rosserhead Debarker Head
.

207
MDI TWA-200-HD Metal Detector
Hydraulic Drive, 17' through feed belt conveyor, 24" belt

208
Morbark Log Trough with Dual Kickers
52 1/2" x 25' with 12" MAC chain, hydraulic drive

209
5-Strand Transfer Deck with Load Off
13' x 14'6" with 26" steel legs on one end, other end mounted on concrete wall

210
Morbark Hydraulic Pack
Was used on lots 205, 207, 208, and 209

211
Webster Vibrating Conveyor
Model FSH, 24" pan, 6" sides, 27' long, 18" legs

212
Webster Vibrating Conveyor
Model FSLk 12" pan, 6" sides, 35' long, does not include 60" Fiberglass section, 30" section with dust holes, 18" off ground

213
CR-85 Electric Metal Detector and 60" Fiberglass Section
.

214
Jeffrey 34WB Top Feed Hammer Mill
Serial # 119790, does not include electric motor

214A
Baldor Soft Start
Was used on lot # 214

214B
125 HP Electric Motor
Was used on lot # 214, 3 phase, 445U frame, 230/460 V

214C
Capacitor and Cutoff Switch for Hammer Mill
.

215
Steel Up and Over Step
Top platform is 36" wide and 36" off ground

216
Cleereman Linear Positioning Carriage With 4 Brownsville Turners
Serial # 42-783 02, electric over hydraulic controlled, linear positioning, includes cab and controls, very good condition, 1st lot of an entirety

216A
Silvatech Scanning System
Includes Silvatech setworks in cab.

217
FSC Hydraulic Unit for Cleereman Carriage
Model PU30H80G-630-0797, serial # 2615-2498

218
Jacobson Engineering Feed and Drive
Model PX 8065P2 Y RL 9, serial # D702816, Input HP 125, Input RPM 1170/2000, HP Rating 400 HP at 1170 RPM,

219
Track and Frame
60 " x 60'

220
Entirety Lot 216-219
With 10% raise

221
Cleereman M36 36" Bar Type Log Turner
Serial # 3618-12902, very good condition

222
4-Strand Log Deck with Stop and Load
19' x 26', hydraulic Tulsa gear drive, 38" steel legs

222A
Double A Hydraulic Unit
15 HP, was used for log turner

223
Parts for Cleereman Carriage
.

224
Dust Blower to Cyclone
24", 10 HP electric motor

225
Cyclone
6', 32" diameter

226
6' Salem Head Rig
Serial # 83847-79, weight strain, good meat on wheels approx 1 1/4", does not include electric motor, good condition

226A
S-Trac Soft Start
Was used on lot # 226

226B
Lincoln 200 HP Electric Motor
Was used on lot # 226, 1785 RPM, Frame 445T

226C
Capacitor and Cutoff Switch for Head Rig
.

227
Mellott Drop Belt Conveyor
13' x 24" electric drive, air cylinder

228
Enterprise Live Roll Case
40" x 22' with 8 1/2" x 30" rolls

229
Guards
2-6', 1-7'

230
4-Strand Angled Transfer Deck
102" x 16' electric drive

231
Crosby 4" x 42" Edger
Serial # 29041, 100 HP electric motor, includes infeed/outfeed, hydraulic pack, lasers, tailing device setup for cutting 1/4 sawn

231A
Allis Chalmers Electric Motor
100 HP, 1770 RPM, frame 405T

232
Heaters
All heaters hanging from ceiling, total of 4

233
Edger Blades
20", total of 6

234
Chain Slab Drag
12' x 18' electric drive

235
5-Strand Grading Deck
C55B Roof Top Chain, 13' x 30', electric drive, does not include roll cases underneath

236
Spiral Roll Case Underneath Grading Deck
36" x 20', electric drive

237
Pop Up Roll Case Underneath Grading Deck
Live rolls 32" x 24', includes lift table

238
Drop Roll Case
12" x 19'

239
Crosby Trim Saw
Serial # 29040, 2-saw, 6'-17', 20" blades

240
Roll Case
32" x 23' with 8 1/2 " x 24" roll includes electric drive, 20" steel legs

241
Spiral Roll Case
41" x 16' with 8 1/2" x 30" rolls, no drive

242
4-Strand Green Chain
10' x 100' with 26" steel legs, popup on feed system, electric drive, C55B Roof Top Chain, chain is new

243
Lumber Cart
46" wide

243A
Lumber Cart
46" wide

244
Lumber Cart
91" x 38", wheels do not swivel, 16" off ground

245
Lumber Cart
91" x 38", wheels do not swivel, 16" off ground

246
Lumber Cart
91" x 38", wheels do not swivel, 16" off ground

247
Lumber Cart
91" x 38", wheels do not swivel, 16" off ground

248
Lumber Cart
91" x 38", wheels do not swivel, 16" off ground

249
Lumber Cart
91" x 38", wheels do not swivel, 16" off ground

250
Lumber Cart
91" x 38", wheels do not swivel, 16" off ground

251
Lumber Cart
91" x 38", wheels do not swivel, 16" off ground

252
Lumber Cart
91" x 38", wheels do not swivel, 16" off ground

253
Lumber Cart
91" x 38", wheels do not swivel, 16" off ground

254
Lumber Cart
91" x 38", wheels do not swivel, 16" off ground

254A
Lumber Cart
47" x 70" x 12"

254B
Lumber Cart
47" x 70" x 12"

254C
Lumber Cart
47" x 70" x 12"

255
Lumber Cart
47" x 70" x 12"

256
Air Tank
24" diameter, 84" high, These next lots are in the basement of the main sawmill.

257
Air Tank
42" diameter, 96 " long

258
Belt Conveyor
20" x 30' with 13" belt, electric drive

259
Webster FSH Vibrating Conveyor
Serial # 942-1517-1, 18" pan, 6" sides, 18" off ground, 55' long, does not include fiberglass section, 72" section with dust holes, electric drive

260
MDI W/CR-85 Metal Detector with 60" Fiberglass Section
.

261
Belt Conveyor
11" x 25' with 10" belt, electric drive

261A
Belt Conveyor
10" x 92" with 5 1/2" belt, 3 sides

262
Morbark 586E Chippac
Serial # 861, 6 knife with blower, 58", 6' x 6' screen in good condition, does not include electric motor

262A
Baldor Soft Start
Was used on lot 262

262B
Morbark Two Van Blower System
Includes electric motor, in good condition, was used up untill they installed the bin system

262C
Lincoln 125 HP Electric Motor
Was used on lot 262, frame 405T, 1775 RPM, 3 phase

262D
Capacitor and Cutoff Switch for Chipper
.

263
Paddle Conveyor on Incline
19" x 31"

263A
All Steel Slide Pans In Basement
Does not include any structural steel

264
Peerless WS 14 Unit Sawdust Bin
Approx 16' square.

265
Honeyville Bucket Elevator
M.43-24, serial # 94904A, 70' to platform

266
Sheldon Machine Co. Lathe
1/2 HP motor, 1 phase

267
Parts for Barn Sweep
.

268
Weg Electric Motor
50 HP, 3 phase, 326 TZ frame, 1775 RPM

269
Allis Chalmers Electric Motor
125 HP,3 phase, 1770 RPM, 405T frame

270
Howell Electric Motor
15 HP, 3 phase, 1150 RPM, 324U frame

271
Allis Chalmers Electric Motor
30 HP, 3 phase, 1750 RPM, 326U frame

272
Allis Chalmers Electric Motor
30 HP, 3 phase, 1750 RPM, 326U frame

273
Baldor Electric Motor
30 HP, 1725 RPM, 3 phase, 286T frame

274
Siemens-Allis Electric Motor
15 hip, 1745 RPM, 3 phase, 254T frame

275
Lima Electric Motor
10 HP 1800 RPM, 3 phase, 256U frame

276
General Electric Motor
5 HP, 1150 RPM, 3 phase

277
Electrical Supplies
Wire, shut offs, conduit, etc.

278
Conveyor Belts, Fiberglass Pieces, etc.
.

279
Hammers for Hog
.

280
Chipper Knives
.

281
8-Groove Pulley and Belts
21 1/4" pulley for 5" shaft

281A
Chipper Knives
5-set

282
Electrical
.

283
Electric Motors
Total of 8, 1/2 -7 1/2 HP

284
Electrical Supplies
.

285
Conduit
Over 50 pieces, 3/4"-1 1/2"

286
Wire
All wire on wall

287
Air Tank
30" diameter x 84" long

288
Sullair 25H Air Compressor
Serial# 81XN10-3430, 8561 hours, series 10

289
Allen Bradley Electric Panel with Starters
 38 starters

289A
480V Main Disconnect
.

289B
480V Main Disconnect
.

289C
480V Main Disconnect
.

289D
All Wiring in Building not Already Sold
Lighting, conduit, etc. 

290
Hanchett 109 Stretcher Roll
Serial # 1303, type 14

291
Grinding Wheels and Accessories in Wooden Cabinet
.

292
Hanchett Left-Hand Band Saw Grinder
Serial # 1349, size A230, includes blower

293
Hanchett 14" Band Saw Blade Shear
Serial # 1172

294
Thomson-Lane Saw Guide Block Grinder
Serial # 936, model B

295
Blower
1 HP electric motor

296
Chipper Knives
5 set

297
IKS 4080LP Knife Grinder
Serial # 1003

298
Bands for Band Mill
Total of 3, marked 'useable last resort'

298A
Band for Head Rig
38' 8" x 11", brand new

298B
Band for Head Rig
38' 8" x 11", brand new

299
Band for Head Rig
38' 8" x 11"

300
Band for Head Rig
38' 8" x 11"

301
Band for Head Rig
38' 8" x 11"

302
Band for Head Rig
38' 8" x 11"

303
Band for Head Rig
38' 8" x 11"

304
Band for Head Rig
38' 8" x 11"

305
Cleereman Carriage
Serial # 36-748 01, 36", 3 headblock, electric over air setworks, includes cab and controls, 1st lot of an entirety

306
Hydraulic Unit
50 HP electric motor, feed for drive

307
Cleereman Drive
.

308
Track and Frame
52" x 50'

309
Edmiston's Husk
Serial # VHE-208E, does not include electric motor, 56" blade

309
Edmiston's Husk
Serial # VHE-208E, does not include electric motor, 56" blade

310
4-Strand Log Deck
10' x 20' with stop and load, electric Tulsa gear drive,

311
Mellott #5 Log Turner
Includes controls

311A
Hydraulic Unit for Log Turner
15 HP electric motor

311B
Marathon 150 HP Electric Motor
Was used on lot 309, frame 445T

312
Entirety Lot 305-311B
With 10% raise

312
Entirety Lot 305-311B
With 10% raise

312A
56" Circular Saw Blade
F8 S Tooth

312B
56" Circular Saw Blade
F8 S Tooth

312C
56" Circular Saw Blade
F8 S Tooth

312D
Spare Parts for Circular Saw Blades
Everything in wooden cabinet, lot of brand new Simonds accessories

366A
Fromm A383 Pneumatic Sealless Combination Tool For 1-1/4" Steel Strapping
.

313
Edmiston's Drop Belt Conveyor
10' x 32' with 18" belt, electric drive with air cylinder

367
Adjustable Stands
Total of 5

314
Roll Case
32" x 152" with 6 1/2 x 20" rolls, electric drive

315
4-Strand Transfer Deck
116" x 17', C55B Roof Top chain, electric drive

316
Belt Conveyor
25" x 21" with 24" belt, electric drive

317
Brewco B-1600 Grade Run-around Resaw System
Serial # BBC-0106, The Wolf, with 5-way board separator , nice clean machine, includes complete runaround and hydraulic unit

318
Roll Case
32" x 39' with 20" x 6 1/2" rolls, 26" steel legs, electric drive

319
Transfer Deck with Jump Chain
10'6" x 11' electric Tulsa gear drive

320
Crosby 4" x 36" Edger
Serial 4656T, 2 moveable blades, with in feed and laser, includes hydraulic unit

321
4-Strand Transfer Deck
99" x 160", 18" steel legs, electric drive, C55B Roof Top chain

322
4-Strand Transfer Deck
93" x 150" with 22" steel legs

323
Roll Case
29" x 27" with 27" steel legs, 18" x 4 1/2" rolls

324
4-Strand Green Chain
10'2" x 82', one side has 17" steel legs, the other has 43" steel legs, electric drive, C55B Roof Top chain

325
Precision Husky 58" Chipper
6-knife, does not include electric motor, includes pipe to cyclone, 1st lot of an entirety

325A
125 HP Electric Motor
Was used on lot 325, more info coming

326
6' x 6' Rotary Chipper Screen
.

327
60" Cyclone
.

328
Entirety Lot 325-327
With 10% raise

329
Belt Conveyor
17' x 13" electric drive

330
Morbark Chip Blower
Serial # 12047GGJ, 10 HP electric motor

331
Honeyville HF26 Sawdust Blower
75 HP electric motor, 60"

332
96" Cyclone
Includes dust pipe from blower

333
Webster Vibrating Conveyor
12" pan, 6" sides x 60' long with 60" fiberglass section, 7.5 HP electric motor, located underneath circular saw to chipper

334
MDICCW-78 Metal Detector
Serial # 71284

335
Webster Vibrating Conveyor
12" pan, 4 sides, 90' long, 17" off floor, located underneath green chain

336
Belt Conveyor
17" x 25' with 11 1/2" belt, 4" sides, electric drive

337
Belt Conveyor
15" x 18', 3 sides, 10" belt

338
Lumber Cart
30" x 46"

339
Lumber Cart
30" x 46"

340
Lumber Cart
30" x 46"

341
Lumber Cart
30" x 46"

342
Lumber Cart
30" x 46"

343
Lumber Cart
16" x 46"

344
Lumber Cart
16" x 46"

345
Lumber Cart
16" x 46"

346
Lumber Cart
16" x 46"

347
Lumber Cart
16" x 46"

348
Lumber Cart
16" x 46"

349
Lumber Cart
16" x 46"

350
Lumber Cart
16" x 46"

351
Lumber Cart
16" x 46"

352
Lumber Cart
16" x 46"

353
Lumber Cart
16" x 46"

354
Lumber Cart
16" x 46"

355
Lumber Cart
16" x 46"

356
Lumber Cart
16" x 46"

357
Lumber Cart
16" x 46"

358
Lumber Cart
16" x 46"

359
Lumber Cart
16" x 46"

360
Hanchett A220 LH Saw Sharpener
serial # 1260

361
Banding Cart
.

362
Banding Cart
.

363
Banding Tools
.

364
1 1/4" Steel Banding
23 rolls

364A
1 1/4" Banding Clips
Approx. 1000 pieces

365
Fromm A383 Pneumatic Sealless Combination Tool For 1-1/4" Steel Strapping
.

366
Fromm A383 Pneumatic Sealless Combination Tool For 1-1/4" Steel Strapping
Model A26B1035, serial # 2651630, size 114

367
Fromm A383 Pneumatic Sealless Combination Tool For 1-1/4" Steel Strapping
.

367A
Steel Banding Cart and Banding Tools
.

368
Shop Built Hydraulic Press
.

369
Speed Reducer for 2 1/2" Shaft
.

370
Shop Built Buffing Machine for Brewco Band Wheels
.

371
Hanchett 413 LH Saw Sharpener
Serial # 228

372
Cooks Cat Claw Sharpener
.

373
Brewco Tooth Setter
.

374
Silvatech Log Scanning System
Complete set with computers and everything

375
SCMI M-2 Ripsaw
Serial # 8650475

375A
Patz Belt Conveyor
17" x 22' electric drive, has some damage

376
Grutter 1606 Left Hand Cut Off Saw
Serial # 23953, includes infeed and outfeed, 24" blade

376A
Westinghouse Electric Motor
150 HP, 3 phase

376B
Grutter Upcut Saw
Model 1604, serial # 25950-R. Needs Work

377
Patz Belt Conveyor
18" x 20'

378
LN2 Log Turner
.

379
Belt Conveyor
21" x 17' electric drive

380
Conveyor
12" x 50', not assembled

381
Montgomery 34HD50 Blo Hog Grinder
Serial # 1344, top feed, does not have a fan in the blower

381A
Webster Vibrating Conveyor
60' x 18" with 10" sides, electric motor, 20 HP Daylor

381B
New Anvil Set For Blohog
.

382
All Dust Pipe
.

382A
Lincoln Welder 9413
Stick welder, Ranger 8, works good, 2215 hours

382B
Skid of Electrical Supplies
.

383
Air Hoses and Air Nozzles
.

384
Wheelbarrows and Stepladder
.

385
10 Shovels
.

386
Cant Hooks and Concrete Placers
.

387
10 24" Push Brooms
.

388
Conveyor Belts, Grease Gun, Grinding Wheels, and Hydraulic Hoses
.

389
ACME Junior Circular Saw Sharpener
1/3 HP Baldor electric motor, serial # 903

390
Skid of Saw Blades
12" and 20" with 4" arbor, 16" with 3 1/2" arbor, 24" with 1" arbor

391
Air Hoses, Gas Cans, Electric Chain Saw, Grease Guns
.

392
Heavy Duty Vise, Saw Blades, 7" Metal Cutting Wheel, Electric Motor
.

393
11 Electric Heaters
.

394
4" Rockwell/Delta Joiner
.

395
Tire Chains
.

396
21" and 32" Electric Fans On Stand
.

397
Round Buffing Table
32" diameter, 1/2 HP electric motor

398
Wood-Mizer Band Sharpener
.

399
Dust Blower On 55 Gallon Drum
1 HP motor

400
Skid Of Parts For Hammer Mill
.

401
Rooftop Chains, 9" Rollers, 10" Conveyor Belts
.

402
Bolt Bin
35" x 42" x 12", 56 bins, no contents

403
Pallet of Miscellaneous Belts
.

500
2018 Volvo VNL Truck, VIN # 4V4NC9EJ6JN894663
Year: 2018
Make: Volvo
Model: VNL
Vehicle Type: Truck
Mileage:281,866
Plate:
Body Type:
Trim Level:
Drive Line: 6x4
Engine Type: L6, 12.8L
Fuel Type: Diesel
Horsepower: 475-524HP
Transmission:
VIN #: 4V4NC9EJ6JN894663

Features and Notes: , Volvo D13 500 HP engine, 12 speed transmission AT02612F, automatic, 281,866 miles, 3.08 ratio, 40,000 lb. steer tires are new, DOT approved, clean one owner truck in excellent condition, maintenance records available on request
 

501
2018 Mack Anthem Truck, VIN # 1M1AN4GY6JM001169
Year: 2018
Make: Mack
Model: Anthem
Vehicle Type: Truck
Mileage: 227,402
Plate:
Body Type:
Trim Level:
Drive Line: 6x4
Engine Type: L6, 13.0L
Fuel Type: Diesel
Horsepower: 435HP
Transmission:
VIN #: 1M1AN4GY6JM001169

Features and Notes: MP8-505E MACK engine, 3.08 ratio, 40,000 lb. clean, well maintained, DOT approved, one owner truck in very good condition, maintenance records available on request

501A
2016 Mack CXU613 Truck, VIN # 1M1AW21Y3GM075779
Year: 2016
Make: Mack
Model: CXU613
Vehicle Type: Truck
Mileage: 423,300
Plate:
Body Type:
Trim Level:
Drive Line:
Engine Type: L6, 12.8L
Fuel Type: Diesel
Horsepower:
Transmission: automatic
VIN #: 1M1AW21Y3GM075779

Features and Notes:  DOT approved, 40,000 lb.clean one owner truck in very good condition, maintenance records available on request
 

502
2016 Volvo VNL Truck, VIN # 4V4NC9EJ7GN956953
Year: 2016
Make: Volvo
Model: VNL
Vehicle Type: Truck
Mileage: 469,030
Plate:
Body Type:
Trim Level:
Drive Line: 6x4
Engine Type: L6, 12.8L
Fuel Type: Diesel
Horsepower: 475-524HP
Transmission: automatic 
VIN #: 4V4NC9EJ7GN956953

Features and Notes: Volvo D13 500 HP engine, ECO-Torque Volvo automatic transmission AT02612D, DOT approved, 3.08 ratio, 40,000 lb. clean one owner truck in good working order, engine light is on has something to do with DEF system.

503
2016 Volvo VNL Truck, VIN # 4V4NC9EJ0GN974159
Year: 2016
Make: Volvo
Model: VNL
Vehicle Type: Truck
Mileage: 476,366
Plate:
Body Type:
Trim Level:
Drive Line: 6x4
Engine Type: L6, 12.8L
Fuel Type: Diesel
Horsepower: 475-524HP
Transmission:
VIN #: 4V4NC9EJ0GN974159

Features and Notes: Volvo D13 500 HP, Eco-Torque Volvo Automatic transmission AT2612D, DOT approved, 2.47 direct drive, 40,000 lb. clean one owner truck in good condition, maintenance records available on request

504
2014 Volvo VHD Truck, VIN # 4V4KC9EH7EN165805
Year: 2014
Make: Volvo
Model: VHD
Vehicle Type: Truck
Mileage: 321,020
Plate:
Body Type:
Trim Level:
Drive Line: 6x4
Engine Type: L6, 12.8L
Fuel Type: Diesel
Horsepower: 425-474HP
Transmission:
VIN #: 4V4KC9EH7EN165805

Features and Notes: Volvo D13 435 HP, transmission FRO-16210B, 10 speed manual, 321,020 miles, DOT approved, 3.08 ratio, 40,000 lb. good working condition, maintenance records available on request

505
2013 Freightliner Coronado 132 Glider Truck, VIN # 3ALXFB007DDFD1804
Year: 2013
Make: Freightliner
Model: Coronado 132 Glider
Vehicle Type: Truck
Mileage: 778,075
Plate:
Body Type:
Trim Level:
Drive Line:
Engine Type: Reman Fitzgerald Glider Pre-emission
Fuel Type: 
Horsepower:
Transmission: 13 speed
VIN #: 3ALXFB007DDFD1804

Features and Notes: 13 speed manual, Reman transmission, new clutch, 2 Reman differentials and a Reman Fitzgerald Glider Pre-emission engine at 570,000 miles, DOT approved, 40,000 lb. good working order, clean truck, maintenance records available on request

505A
2005 Freightliner M2 106 Medium Duty Truck, VIN # 1FVACXDC75HU68586
Year: 2005
Make: Freightliner
Model: M2 106 Medium Duty
Vehicle Type: Truck
Mileage:  627,000 
Plate:
Body Type:
Trim Level:
Drive Line: 4x2
Engine Type: L6, 7.2L (439 CID)
Fuel Type: Diesel
Horsepower: 330HP
Transmission:
VIN #: 1FVACXDC75HU68586

Features and Notes: DOT approved, 6 speed manual

505B
2001 Freightliner Columbia 120 Truck, VIN # 1FUJA6CG71PJ03740
Year: 2001
Make: Freightliner
Model: Columbia 120
Vehicle Type: Truck
Mileage: 1,100,000
Plate:
Body Type:
Trim Level:
Drive Line: 6x4
Engine Type: L6, 12.7L (775 CID)
Fuel Type: Diesel
Horsepower:
Transmission:
VIN #: 1FUJA6CG71PJ03740

Features and Notes: Detroit 12 L Engine, Sleeper, Runs and Drives

506
1995 International 4900 Truck, VIN # 1HTSDAAN1SH635538
Year: 1995
Make: International
Model: 4900
Vehicle Type: Truck
Mileage:  771,912
Plate:
Body Type:
Trim Level:
Drive Line: 4x2
Engine Type: L6, 7.6L (466 CID)
Fuel Type: Diesel
Horsepower:
Transmission:
VIN #: 1HTSDAAN1SH635538

Features and Notes: , 6 speed manual, 24' 6" x 8' bed, runs and operates

507
2004 Ford Econoline Wagon Van, VIN # 1FBNE31L44HA78049
Year: 2004
Make: Ford
Model: Econoline Wagon
Vehicle Type: Van
Mileage: 244,510
Plate:
Body Type: 4 Door Van; Passenger
Trim Level: Base
Drive Line: RWD
Engine Type: V8, 5.4L (330 CID); SOHC 16V; EFI
Fuel Type: Gasoline
Horsepower: 235-260HP
Transmission:
VIN #: 1FBNE31L44HA78049

Features and Notes: 12 passenger, has some rust, runs and drives

510
Barko 160D Knuckleboom
On trailer, good tires delimber hookup, continuous swivel, new seat, hours unknown, runs and operates, ready for work

511
Peerless Timber Jack 217 OB Knuckleboom
Serial # CB1081, on trailer, good tires, one needs replaced, delimber hookup, heat, 4775 hours, continuous swivel, runs and operates

512
1987 Cat Model 518G Grapple Skidder
Serial # VO1551, Esco sorting grapple, Dual Arch, Winch, power shift, 23.1 x 26 tires, tires 20%, 21089 hours, open cab, runs and operates

513
1997 Morbark 22" Whole Tree Chipper
hours unknown, 600 HP, Cummins KTA600 Engine, Twin Disc clutch, clutch needs repair

514
Toyota Fork Lift
Model 02-3FGC30, serial # 3FGC3011062, 3 stage, side shift, 5700 lift, LP gas, does not run

515
Cat 525 Skidder Chains
.

516
John Deere 640G Skidder Chains
.

520
2006 Vanguard 53' Van Trailer
VIN 5V8A53206M605325

521
2005 Hyundai 53' Van Trailer
VIN 3H3V532C35T152027

522
2004 Wabash 53' Van Trailer
VIN 1JJV532W44L88609

522A
1997-53' Van Trailer
1997 Trailmobile, Model-01JA-1RAY, GVWR 65000, VIN 1PT01JAHXV6004682, Height 13' 6", Width 2.6M, sell W/title, Good Condition

522B
2004 53' Hyundai Van Trailer*
2004 Model# VP2530152AJS, VIN# 3H3V532C04T032040, GVWR 65000, trailer # 23554, Sells W/title, Good Condition

523
2003 53' Utility Van Trailer
VIN 1UYVS25333G097612

523A
2014 East 48' x 102" Flat Trailer with Tarp System
VIN 1E1H5Y289ER050388

523B
2012 East 48' x 102" with Tarp System
VIN 1E1H5Y281DRG47925

524
2007 East 48' x 102” Aluminum Flat Trailer with Tarp System
VIN 1E1H5Y28117RM41375

525
2006 East 48' x 102" Aluminum Flat Trailer with Tarp System
VIN 1E1H5Y2846RC39079

526
2005 East 48' x 102” Aluminum Flat Trailer with Tarp System
VIN 1E1H5Y2815RG35154

529
2004 48' x 102" Benson with Tarp System
VIN 5DMFABTB04M000387

529A
2003 Manac Conestoga Trailer
48' Trailer W/ tarp system,Trailer# 48406, Model # 15248901, VIN 2M512146036083801, inside dimensions 96" x 102", W/title, GVWR 76280, Max Concentrated Load 120,000 lbs, Good Condition!

530
2005 3 Bunk Log Trailer
VIN DPS0GASVE60163206

531
2003 3 Bunk Log Trailer
VIN DPS02ASVE30283202

531A
Log Trailer*
2 1/2 bunk, 40’

600
3-Strand Log Deck
10' x 26' x 48" steel wheels, electric Tulsa gear drive       NOTE All 600 lots are located at 7100 CR 407 Millersburg OH (Yoder Lumber's Buckhorn Plant)

601
4-Strand Unscrambler
12' x 7' x 5' high, chain type, electric drive. Located at 7100 CR 407 Millersburg OH

602
4-Strand Transfer Deck
11' 3" x 13' x 38" high, electric drive. Located at 7100 CR 407 Millersburg OH

603
HMC 2-Saw Trim Saw
Serial # 246-88, overall 21' x 8', with electric motor and drive. Located at 7100 CR 407 Millersburg OH

604
4-Strand Green Chain
112" x 37' x 18", electric drive, no chain. Located at 7100 CR 407 Millersburg OH

605
Live Roll Case
24" x 64' x 32", electric drive, 6 1/2" x 20" rolls, Located at 7100 CR 407 Millersburg OH

606
Belt Conveyor
24" x 26', 5" sides, electric drive, 1 1/2 3-phase motor. Located at 7100 CR 407 Millersburg OH

607
Klamath 7' RH Band Mill
With off belt, 24" weight strain. Located at 7100 CR 407 Millersburg OH