Terms & Conditions

By accepting the terms and conditions of this auction you acknowledge you are entering into a legal and binding contract. You agree to abide by all terms and conditions and you acknowledge receipt of all explanations and information made available by Steffes Group, Inc., also referred to as Steffes Group or Company. 

Payment

When paying within the stated time and with our acceptable payment methods: 

• A 10% buyer’s premium with a maximum charge of $1,000 per item applies to items purchased on Timed Online Auctions.
• A 2% buyer’s premium with a maximum charge of $1,000 per item applies to items purchased on Live Webcast Auctions.

You agree to make payment for all online purchases in U.S. funds within 2 business days of receipt of invoice by one of the acceptable forms of payment unless approval of financing arrangements is made with Steffes Group. To issue a check by fax, simply write a check as you normally would and fax a copy to us. All NSF checks will be charged a $30 fee. Checks by mail are not an accepted form of payment. Any other form of payment, other than the listed acceptable payment methods are subject to an additional 3% buyer's fee on the full amount of the purchase. No items will be released until full payment clears our office.

Acceptable forms of payment:

• Bank Wire Transfer; please call for wire instructions to be emailed to you.
• Check delivered to our office that held the auction
• Check By Phone

West Fargo, Sioux Falls, Grand Forks 701-237-9173

Litchfield 320-693-9371

Mt. Pleasant, Ames 319-385-2000

• Check By Fax

West Fargo, Sioux Falls, Grand Forks 701-237-0976

Litchfield 320-693-9373

Mt. Pleasant, Ames 319-385-4709

Sales Tax

ALL APPROPRIATE STATE SALES TAX LAWS APPLY PER THE LOCATION OF POSSESSION AND SELLER TYPE OF THE PIECE OF EQUIPMENT.

Listed below is a link for the Streamlined Tax Exemption form that includes 24 participating states. States that do not participate in the streamlined form, but in which Steffes Group frequently transacts business are MO and IL. Please contact our office if you would like us to send you a form for one of these states. The link for the streamlined form includes the states of IA, MN, ND, NE, and SD, among others.

Streamlined Sales Tax Agreement Certificate of Exemption

If you have any questions concerning sales tax, please contact the appropriate state government agency for that location or contact our office. Minnesota requires sales tax to be charged on all online consignment auctions unless the buyer provides an exemption form. 

ND Dakota titled vehicles

Per North Dakota vehicle and sales tax laws, upon registration and licensing of any titled vehicle or trailer, any buyer’s premium paid is considered to be part of the sales price. Sales tax will be charged by the State of North Dakota on the entire sales price (including buyer’s premium) for any vehicle registered in North Dakota. 

If you have any questions concerning sales tax on a piece of equipment, please contact the appropriate state government agency at the location of the item on auction. 

ND Sales Tax Terms for Canadian Customers

 Used Farm Equipment

The sale, at auction, of used farm machinery to a Canadian farmer for agricultural use is exempt from sales tax the same as a North Dakota Farmer.

The purchase, at auction, of used farm machinery by a Canadian farm equipment dealer (retailer) would be sales taxable unless:

• You complete an exemption certificate with a ND sales tax permit number
• The purchased goods are shipped by a 3rd party to you in Canada - in this case a delivery receipt must be provided to Steffes Group.

 New Farm Equipment

The sale, at auction, of new farm machinery to a Canadian farmer for agricultural use, or a Canadian farm equipment dealer (retailer) is taxable at the current state rate of 3% plus any local sales tax if applicable.  The law also provides that Canadians may apply for a refund of the tax paid when meeting certain requirements.  This form and conditions of use are available online at http://www.nd.gov/tax/salesand%20use/canrefund/. 

Agents for Sellers
Steffes Group, Inc. and its Employees act merely as agents for sellers. All auctions are with reserve unless specifically stated otherwise. Auctions are with undisclosed reserves unless advertised otherwise as "Absolute."  Auctioneers, at their discretion, may place a reserve bid on behalf of the seller. All final bids are subject to the seller's confirmation. Only the top bidder will be contacted as to the status of his/her bid. While the information we provide on item(s) is deemed correct, no warranties are expressed or implied as to any items being sold, and you agree to purchase and accept the item in an as-is condition. Information on items is obtained by us from the sellers and you hereby agree to hold harmless Steffes Group and our Employees for any errors or omissions regarding the item(s) being sold. This information includes but is not limited to year, model, machine or engine hours, physical condition, options, features and other data pertinent to the value of the item. All items are sold As-Is-Where-Is unless specific factory or seller issued warranties are listed in the item description.

Inspection

You acknowledge that you have the right and responsibility to inspect the item(s) personally, or to have a third party representative inspect the item(s) for you. That by bidding on an item you have agreed to accept that item in its present condition at its present location and with the description provided whether accurate or not. 

Auction Close

Timed-online auctions will begin to close on the date and time listed. Lots will remain open until no bids have been placed within the last 4 minutes. Timed-online auctions normally close at a rate of 3 lots every 2 minutes.  

Please note that some lots can be tied together and will be set to close simultaneously.  This will be indicated in those lots by a paper clip symbol.  Please hover your mouse over the symbol to see what lots are tied together. The paper clip symbol means that each lot tied will stay in extension until there are no more bids on any of the lots that are tied.

         Steffes Group reserves the right to close multiple lots per minute at its discretion. Upon your accepted bid of an item, that item shall immediately become your responsibility and be at your risk (whether you have paid for that item or not). You agree that Steffes Group, its employees, and its sellers are not responsible for lost, stolen or damaged items and will not reimburse or discount items for any type of loss. Buyers are responsible for any costs incurred to prepare your item(s) for transport and/or shipping. This includes, but is not necessarily limited to, the cost of any rigging, dis-assembly, special loading requirements, transport, packaging, insurance, and all other costs related to physical transfer of your item(s). You agree to remit payment and remove from the auction property any purchases within the stated time for the auction being conducted. You further understand and agree that failure to remove items in the stated time for the auction will subject you to moving and storage fees unless arrangements have been made with the seller. 

Buyer Default

When using our online auction services you are making a firm commitment to purchase said item(s) and are entering into a legal and binding contract. Bids may not be cancelled or retracted for any reason. 

Non-paying bidders or fraudulent bidding will subject you to legal recourse and possible criminal charges including any fraud and/or interstate commerce violations. 

Internet Risk

You acknowledge that the internet may be an unreliable and error-prone network. Steffes Group will not guarantee that bids placed online will always be transmitted to or received by the auctioneer in a timely fashion. You agree to hold Steffes Group, Inc. and its employees harmless for any interruptions in online bidding. At the sole discretion of the Company, the auction may be suspended, postponed, or cancelled if internet service is unstable or disrupts the online portion of any event that is simulcast as an Internet Auction. 

Further, the auctioneer has the sole discretion to accept or refuse any bid. Steffes Group retains the right, at our sole discretion, to add, delete, or change some or all of our online services and the terms and conditions governing their online auctions at any time without notice. 

Abandonment Policy

Steffes Group provides this Abandonment Policy to inform you of our policies and procedures regarding any purchased item(s)/property that has not been removed by a buyer in a timely manner. Upon winning the bid for an item(s), after paying for item(s) purchased, a buyer is obligated to remove the item(s) from the auction site within a timely manner. 

Steffes Group may deem a buyer's failure to claim and remove equipment within 60 days following the close of an auction as evidence of buyer's intention to abandon the property. In these instances, the Company may take action that is adverse to buyer's interest in the property, including, but not limited to steps to dispose of the property. 

Disposition of property may include a variety of approaches based upon the buyer's purchase price of the property as follows: 

1) For those items with a final selling price of $5,000 or less, the Company will determine the appropriate disposition approach which may include:

• Removing and disposing as the Company sees fit.
• Allowing seller to retain or scrap.
• Sell the item(s), whereby the Company will remit the sales proceeds to the buyer, less selling and advertising expenses, storage costs, plus 20% administrative fee. 

2) For those items with a final selling price of greater than $5,000, Steffes Group may remove the item from the selling location and resolve as follows:

• The Company may reimburse the seller on the buyer's behalf for storage fees of $25 per day, with the total amount not to exceed $1,500.
• Sell the item(s), whereby the Company will remit the sales proceeds to the buyer, less selling and advertising expenses and storage costs, plus 20% administrative fee. 

If a buyer with the winning bid has not removed the purchased item(s) from selling location within 10 business days after the close of the auction, the buyer will be responsible for directly paying the seller any and all storage fees if levied by the seller. If levied by the seller, storage fees will be $25 per day beginning the 10th day after the close of the auction/winning bid.

FARM RETIREMENT AUCTION

LOCATION:  26081 120 Rd, Lebanon, KS 66952

WEDNESDAY, DECEMBER 9, 2020                                             SALE TIME: 11:00 AM

PREVIEW:  Tuesday, December 1 – Wednesday, December
LOADOUT: Wednesday, December 9 – Wednesday, December 23

AUCTIONEER’S NOTE: Live online bidding available on all equipment.  Registration, terms, & details at SteffesGroup.com

4WD TRACTOR

2002 John Deere 9220, CAH, deluxe cab, buddy seat, 4 hyd. w/splitter, 18 spd. powershift, 4 hyd., 48 gpm hyd. pump, GreenStar ready, (8) 450 lb. wheel weights, (2) 165 lb. wheel weights, Firestone 520/85R46 duals, 6,450 hrs., S/NRW9220P002309

MFWD & 2WD TRACTORS & LOADERS

2018 John Deere 8345R, premium CommandView III cab w/cab susp., leather, buddy seat, ILS, IVT E23 high spd. trans. (26 mph) w/Efficiency Manager, 5 hyd., 85 gpm dual hyd. pump, 3 pt., quick hitch, large 1000 PTO, diff lock, integrated auto steer, GS4 4600 integrated Command Center, secondary GS4 monitor, dual fender controls, (22) front weights, 1,378 lb. rear wheel weights, front fenders, accelerator pedal, StarFire 6000 receiver, HID lights, cold weather pkg., Goodyear OptiTrac LSW 1000 40R/32 front tires, LSW 1100 45R/46 rear tires, 1,974 hrs., S/N1RW8345RKHS118063

2008 John Deere 7830, MFWD, CommandView cab, buddy seat, 20F/20R AutoQuad Plus, LH reverser, accelerator pedal, 32 gpm hyd. pump, 3 hyd., 3 pt. quick hitch, diff lock, 540/1000 PTO, AutoTrac ready, John Deere 746 hyd. loader, 82" bucket w/5-tine grapple, manual quick connect single pt. hookup, front aux. hyd., joystick control, dual fender 3 pt. control, front fenders, (2) 205 kg (2) 72 kg rear wheel weights, rear inside weights, 380/85R34 front tires, 480/80R46 duals, 2,983 hrs., loader S/NW00746C006550, tractor S/NRW7830A010875

1955 Allis Chalmers WD45, 2WD, open station, wide front, gas, PTO, Woods 72" belly mower, hyd. lift, 13.6-28 rear diamond tires, S/N208668

GPS EQUIPMENT

John Deere StarFire 3000 receiver, SF1, S/NPCGT3TA319502 

John Deere 2630 display, SF1, S/NPCGU2UD448964

John Deere 4G LTE Modular Telematics Gateway mobile communications & processing platform, Wireless Data Transfer

COMBINES

2015 John Deere S680, 2WD, Contour-Master w/hyd. tilt, premium cab, deluxe controls, TouchSet, 5 spd. feeder house, reverser, integrated GreenStar III 2630 monitor, SF1, RowSense, StarFire 3000 receiver, SF1, single pt. hookup, power fold hopper, rear camera, TriStream rotor, ext. wear pkg., 26' high cap. unloading auger, large round & round bar concaves, side hill pkg., fine cut chopper w/PowerCast tailboard, folding/telescoping rear hitch, adj. HD rear axle, HID lights, 1250/35/R46 front tires, 850/55/R30 rear tires, 1,296 sep. hrs., 1,793 engine hrs., S/N1H0S650SCF0776587

2015 John Deere S680, 2WD, Contour-Master, premium cab, deluxe controls, TouchSet, 5 spd. feeder house, reverser, hopper extension, TriStream Rotor ext. wear pkg., side hill pkg., integrated GreenStar III 2630 monitor, SF1 w/RowSense, StarFire 3000 receiver, SF1, single pt. hookup, large round concaves, folding/telescoping rear hitch, 1250/35/R46 front tires, 850/55/R30 rear tires, 1,326 sep. hrs., 1,782 engine hrs., S/N1H0S680SKE0775068

(2) Sets of small wire concaves for John Deere S680 

HEADS

2012 John Deere 635FD flex draper head, finger reel, dual knife drive, hyd. fore/aft, stubble lights, single pt. hookup, full poly skids, return to height in rigid mode, Lankota dividers, poly dividers included, S/N1H0635FDPC0745758

2012 John Deere 635FD flex draper head, finger reel, dual knife drive, hyd. fore/aft, stubble lights, single pt. hookup, full poly skids, return to height in rigid mode, Lankota dividers, poly dividers included, S/N1H0635FDKC0745759

2016 John Deere 616C non-chopping corn head, 16x30", split flex, hyd. deck plates, RowSense, Insight Headsight, (2) stalk stompers, opposed knife rolls, stubble lights, single pt. hookup, S/N1H00616CLGX785017

1990 John Deere 853A all crop head, 8x30", 50 Series hookups, S/NH0853AX635550

HEADER TRAILERS

Harvest Ag Fabricating AH642HD header trailer, 42', tandem torsion axle w/front brakes, light kit, extendable hitch, 2-5/16" ball hitch, S/N602730

2008 Maurer header trailer, 38', ext. hitch, pintle/pin, torsion axles, light kit, No Title, S/N08381230000000BS964

MD Products MD08 header trailer, 35', torsion tandem axle, front brakes, light kit, extendable pin hitch, S/N1301

Duo-Lift head hauler, 30', light kit, pin hitch, S/N90925308

GRAIN CART & GRAVITY WAGON

2017 Brent 1196 Avalanche grain cart, 20" hyd. fold unloading auger, hyd. pivot, hyd. spout, manual roll tarp, Graco auto lube, camera on unloading auger, in tank & on rear, large 1000 PTO, 42" Equalizer tracks, S/NB35720117

E-Z Trail EZ-Flow 300 gravity wagon, approx. 350 bu., on 1072 running gear, 11L-15 tires

AIR SEEDER

2015 John Deere 1890 air seeder, 42-1/2', 7-1/2" & 15" space, 17" blades, single shoot, 8-section control, all run blockage monitor, Uniforce hyd. down pressure system, infinitely adj. w/Sun Source controller, (4) cameras & (2) cab hyd. pressure monitors, John Deere 1910 tow-between 420 bu. twin compartment commodity cart, (120 bu. front, 150 bu. rear), hyd. vari-rate, load auger, steel flighting, extra weight pkg. includes (14) on frame, (6) on wings, Needham gauge wheels, 3" neoprene, John Deere seed firmers, Thompson steel closing wheels, total (5) meters w/section control, (2) black, (1) blue, (1) green, (1) yellow, cart S/N1A81910TJGW765315, seeder S/N1A81890CKGF765363

PLANTER

2018 John Deere 1775NT CCE planter, 16x30", MaxEmerge 5E, semi-mount, electric ProDrive, hyd. down pressure, Dawn pneumatic SharkTooth trash whippers, Keaton seed firmers, Thompson packer wheels, SureFire 26 gpm  hyd. liquid fertilizer w/4-section control, rear fill, RowCommand, Wilger sight gauges, on board air, rear hitch, John Deere 2000 rate controller, MudSmith wheels, guidance antenna mounted on planter, No activation, S/N1A01775KJHM775223

BULK TENDER

2017 Strobel Mfg. BT300 tandem axle gooseneck bulk tender, 3-compartment, Kohler Command Pro 9-1/2 hp. electric start, talc metering system, InterComp scale, electric fold 8" auger, LH sight gauges, manual roll tarp, manual traps, steel diamond plate fenders, torsion axle, 235/75R/17.5 tires on 8-bolt rims, S/NBT3017102

SPRAYER

2017 John Deere R4045 self-propelled sprayer, CommandView II cab, leather seat, buddy seat, deluxe controls, 120' booms, 15" space, 1,200 gal. SS tank w/poly rinse tank on top, 3" front fill, 5-nozzle bodies, integrated auto steer, GS3 2630 display, SF2, RH fence row nozzles, BoomTrac Pro 5 sensor control, 10-section boom control, StarFire 6000 receiver, SF1, stainless steel piping, SS eductor, on board air, auto return to height, LED lights, fenders, hyd. tread adj., Michelin 420/95R50 tires, 409 spray hrs., 1,065 engine hrs., never fertilizer, S/N1N04045RLH0176585

Set of (4) Trelleborg 710/65R46 tires for sprayer 

(4) full poly fenders for sprayer 

SPRAYER & WATER TRAILERS

2017 Behnke TSPX22A-SS-1 tri-axle step deck sprayer trailer, 53'x102”, 5' beavertail w/ramps, 13' top deck, wood deck w/steel rails, 3,250 gal. poly saddle tank w/3" discharge, (4) chemical tote connections w/hose & valves, Honda 390 engine w/50 gal. mix cone, electric start & John Blue pump plumbed for 3", ProFill II chemical meter controller, (4) electronic heads, 22.5 tires on steel rims

Kentucky dry van trailer, 48'x102", wood floor, key way walls, air ride w/dump valve, (1) left & (2) right swinging curbside doors, 3,000 gal. poly tank, 3" plumbing, horizontal 3,000 gal. saddle tank, 150 gal. poly rinse tank & air purge cleanout, Honda GX390 13 hp. w/electric start, 3" John Blue pump, 22.5 tires on steel rims

FERTILIZER & CHEMICAL EQUIPMENT

2013 John Deere DN345-TR3000 spreader box, 30" chain, front sight glass, single box, manual roll tarp, dual spreader, belt conveyor, Big 1000 CV PTO, hyd. variable rate, electric/hyd. brakes, walking tandems on 66x43.00-25 tires, S/N1N00345XHD0745158

2012 Patriot fertilizer caddy, 2,000 gal. poly tank, 2" hose, 4-wheel steer, extendable hitch, 19.5x24 tires, S/NMMS016579

Dempster tandem axle fertilizer spreader, tarp, ground drive conveyor, walking axle, 116-15 tires

2,500 gal. poly upright tank, 3" plumbing

2,600 gal. poly horizontal saddle tank, 3" bands, 3" fill top lid
(2) 1,500 gal. poly tanks, 3” discharge

(2) 50 gal. mix cones 

Briggs & Stratton Pacer 2" pump, Intek 206CC, 5.5 hp 

TENDER TRUCK

1986 IHC F9370 Eagle tri-axle tender, 350 Cummins, 13 spd., engine brake, power divider, PTO, air lift steerable front, air dump, throttle, Convey-All dual tank tender box w/hyd. gates & spouts, 10" rear discharge, front plastic auger, spring susp., Shur-Co electric roll tarp, diamond plate fenders, 22.5 front tires on aluminum rims, 736,654 miles

CONE BOTTOM TRAILERS

2015 JD Skiles Industries hand raise/lower single axle cone bottom trailer, dual 3,000 gal. poly tanks, 30 gal. mix cone, Honda GX390 w/electric start, 3" Banjo pump, S/NSN2015CT0502

2012 Behnke Enterprises hand raise/lower single axle cone bottom trailer, dual 3,000 gal. poly tanks, Honda GX340, John Blue 3" pump

SEMI TRACTORS

2007 Kenworth W900B tandem axle 30" sleeper, C13 Cat, 470 hp., Eaton Fuller 3- pedal auto shift, engine brake, air ride susp., air slide 5th wheel, 12,350 lb. fronts, 38,000 lb. rears, power dividers, full poly fenders, dual chrome cleaners & pipes, chrome bumper, 242" WB, 24.5 aluminum wheels, 9,581 hrs., 267,533 miles,

1996 Freightliner FLD120 tandem axle, 60" flat top sleeper, Series 60 Detroit, 500 hp., Eaton Fuller 9 spd., engine brake, air ride susp., air slide 5th wheel, diff lock, cruise, 12,000 lb. fronts, 40,000 lb. rears, 240" WB, 285/75R24.5 tires on aluminum wheels, 713,222 miles, single owner

1993 Kenworth T400, 36" flat top removable sleeper, 3176 Cat, 350 hp., Eaton Fuller 10 spd., jake brake, 8-bag air ride susp., air slide 5th, 208” WB, diff lock, dump valve, 12,000 lb. fronts, 38,000 lb. rears, 285/75R24.5 rear tires on steel rims, aluminum fronts, 656,180 miles, single owner

HOPPER BOTTOM TRAILERS

2010 Wilson Pacesetter DWH551 tandem axle hopper bottom, 46'x96"x64", standard hopper, air ride susp., vented sides, Shur-Co electric tarp & traps, 11R24.5 tires on aluminum wheels

1997 Wilson Pacesetter DWH400 tandem axle hopper bottom, 43'x96"x68", standard hopper, air ride susp., vented sides, Shur-Lok electric roll tarp, Roll-Rite electric traps, 285/75R24.5 tires on aluminum wheels

FUEL TRAILER

2010 Thunder Creek ADT 750 tandem axle fuel trailer, 750 gal., single compartment tank, Power Pro 6.5 hp pump, 1” discharge hose, hose reel

PICKUP

2013 GMC 3500 HD dually, reg. cab, 6.0L gas, automatic, 4WD, cloth, tilt, A/C, cruise, front brush guard w/Class III hitch receiver, B&W 8' steel body, diamond plate deck, 1" plate & vise on back, 5th wheel & Class III hitch, LT234/80R17 tires, 62,848 miles

SCRAPER & BLADES

Holcomb hyd. push-off scraper, approx. 10 yd. w/dolly front, 20-20 6-ply rear tires, S/N4411080

ICON 1632 hyd. grader blade, 16', 6-way, manual side gates, concrete ballast, 19L-16.1 tires, light kit, S/N4587

Grade Master L12A grader blade, 12', 3 pt., dual blade 

MDS SP-TLT-12 dozer blade, 12', John Deere quick tach loader mounts, metal blade, expanded metal backstop, S/N3101

Blade, 84", 3 pt. 

TILLAGE EQUIPMENT

Case-IH 3900 tandem disc, 28', 9" space, 20" blade, manual pitch control, newer hyd. cylinders, 9.5-14SL tandems, S/NJAG0740274

John Deere 1010 field cultivator, 24', flat fold, walking tandems on center, 11" sweeps, 3-bar harrow, 6” spacers

IHC cultivator, 8x30", 3 pt., tunnel shields

GRAIN HANDLING EQUIPMENT

1998 Walinga Agri-Vac 6614 grain vac, small 1000 PTO, cleanup kit, w/(2) 6” steel hose, (1) 6” rubber hose, (1) 5” steel hose, (1) 5” rubber hose, S/NMT6614DLX98097719

2009 Brandt Grainbelt 1535 conveyor, 35’x15”, Kohler Command Pro 20 hp., electric start, Brandt hyd. mover, S/N83637

2008 Brandt grain deck, drive over, 20” conveyor, 12' deck, 215/70R14 tires, S/N86780

Westfield MKX130-74 hyd. lift swing hopper auger, 74’x13”, hyd. hopper jogger, hyd. lift, poly spout, GULP² 10’x20” drive over hopper to auger, aux. hyd. on swing hopper, 540 PTO, S/N278520

OTHER EQUIPMENT

2011 John Deere HX15 batwing mower, 15', hyd. fold, dual blade, spring susp., belted tires, safety chains, 540 CV PTO, S/N1P0HX15FEBT029800

Cat V500 forklift, LP, 5000 lbs., side shift, 2 stage, pneumatic tires, S/N3EC1434

Durham stalk roller for 4WD, w/12"x52" rollers, mount for 9220 tractor

Pallet forks, 48”, off Cat forklift

Shop-built bale mover, 60", 3 pt. 

Bale mover, 60", for loader 

1,000 gal. NH3 tank, needs gear work 

John Deere corn planter, 2x30”, 3 pt., ground drive, 1 bu. hoppers, MaxEmerge row units, 1” poly packer wheels, spring down pressure

SHOP EQUIPMENT

American Industrial air compressor, 2 stage, 17.8 cfm, Honda GX270 engine, hose reel 

Dayton drill press, 15", 110v, 3/4 hp 

Miller Bobcat 250 welder, 30' leads, 10,500 watt generator, Kohler 23 hp., 132 hrs. 

Oxyacetylene torch kit w/cart

Olson O-9X12 horizontal band saw, 9x12", electric, w/(4) adj. stands,  S/N2786

OTC C 30 ton shop press, S/N1007

Emerson Mfg. 220 air-operated jack, 12 ton w/(2) ext.

TSI TJ-22 air-operated floor jack, 2-1/2 ton

National Tool hyd. porta-power, 4 ton

Cherry picker 

Oil change cart, 4-wheel w/electric pump 

Bulk oil tank w/Zeeline pump, 265 gal., Lincoln meter gun & hose reel on wheels 

Barrel cart w/electric motor & PBL electric meter gun 

Rolling steel weld table, 3x3, w/Balco vise & DeWalt chop saw 

Steel table, 8', w/Dayton bench grinder & Parflexer hyd. hose crimper, dyes & fittings

Asst. shop consumables 

FUEL TANKS

10,000 gal. upright fuel tank w/2" electric pump, top manhole, 2 hp. electric motor, Corken 2” pump, 1” discharge hose on hose reel

Twin 500 gal. fuel tanks, Fill-Rite 200 pump, approx. 30' hose, on shop-built saddle

190 gal. steel fuel tank, Great Plains 3025 electric pump, 1” discharge

PARTS, FARM SUPPORT, & MISC.

(68) John Deere 1890 full set down pressure springs 

(32) John Deere factory air drill gauge wheels 

(2) Agri-Speed quick hitches for wagon 

(2) Sets John Deere wheel weights: (2) 205 kg, (1) 72 kg, 1,062 lbs. per stack

(7) Lankota stalk stompers, unused 

Large asst. of John Deere parts for combines, planters, air drills, etc.

Honda GX160 w/3” pump

Large asst. farm support items including consumables

STONES FARMS
Kent & Cindy Stones, 785.389.2038 
or Ben Hochgraber at Steffes Group, 701.425.3391