HIGHLANDS ACQUISITION LLC
Listing ID#: 333165

Sale Location

CLINTWOOD, VA 24225
Sale Dates and TimesSALE IS COMPLETED
Saturday Mar 28, 2020 Completed
Saturday Sep 19, 2020 Completed
Sale Type
 Live Auction 
Company Information
Tri-State Auction & Realty, LLC

Contact: James Savage
Phone: 865-376-7009
Email: auctions@tristate-auction.com
Website: tristate-auction.com

EstateSale.com ID#: 13277
View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
WE DO ACCEPT CREDIT CARDS. PAYMENT IN FULL REQUIRED DAY OF AUCTION UNLESS APPROVED BY AUCTIONEER BEFORE THE AUCTION. NEW BIDDERS BANK LETTER OF GUARANTEE OR REFUNDABLE DEPOSIT OF 25 PERCENT OF MAXIMUM ANTICIPATED BID IS REQUIRED IN ORDER TO BE APPROVED TO BID. FAX LETTER TO 865.376.9103 OR CALL 800.334.4395 OR EMAIL auctions@tristate-auction.com FOR WIRING INSTRUCTIONS.

All descriptions are conscientiously described by the Seller and Auction Company, however, neither assume any liability for errors or omissions. Everything is sold "as is where is" with no expressed or implied warranties. No guarantee of merchant ability or suitability for intended usage is given or implied. The successful bidder is responsible for their lot from the time the auctioneer calls item sold. Neither the Auction Company nor the Seller assumes responsibility for any loss, damage or theft occurring after the hammer falls. Neither the Auction Company nor the Seller assumes any responsibility for any injuries suffered while inspecting, buying or removing equipment. Jurisdiction and venue regarding any legal dispute arising here from shall be held in (LOCATION).

Most states require collection of sales tax on machinery purchases unless buyer can furnish a valid sales and use tax exemption number from your state. NOTE: Some states do not accept out of state direct pay permits.

Listing Information

Highlands Acquisition, LLC.

1031 CHIP MILL ROAD

CLINTWOOD VA 24225

 

JAMES SAVAGE TN LIC# 5120

 VA LIC # 2906000193

DIRECTIONS: FROM POUND VA- AT JUNCTION OF 23 BUSINESS GO EAST ON 83 FOR 3.5 MILES. TURN RIGHT ON TO 361S , GO 1.5 MILES, TURN LEFT ONTO GRAVEL ROAD. STAY RIGHT-FOLLOW GRAVEL ROAD TO SALE SITE.

 

 

 

 

CHIP MILL

-radius crane all electrical w/ Mack grapple

-PRICE 9’ X 80’ DRUM DEBARKER W/DRIVES & CATWALK

-98’ INFEED LOG TROUGH W/6 STRAND 132 CHAIN W/DRIVE *TO THE DRUM DEBARKER*

-45’ OUTFEED LOG TROUGH W/4 STRAND 132 CHAIN W/DRIVE

-HUOT 22’ ENDWISE LOG TROUGH W/2 STRAND 132 CHAIN W/DRIVE

-HUOT 22’ 2 STRAND 87 CHAIN W/LOG POST W/DRIVE

-24”X26’ LOG TROUGH STYLE BELT CONVEYOR W/DRIVE

-70’ LOG TROUGH W/4 STRAND 132 CHAIN W/DRIVE * INFEED TO CHIPPER

-BARKO 160D STATIONARY KNUCKLEBOOM SN# 22550 W/CONTINUOUS GRAPPLE, 75HP ELECTRIC       MOTOR *HAS FIRE DAMAGE

-MURRAY MANUFACTURING LOG SPLITTER W/40HP HYDRAULIC POWER PACK

-40”X105’ INCLINE CONCAVE BELT CONVEYOR W/DRIVE *OUTFEED BELT CONVEYOR OF RADER HOG

-32”X75’ INCLINE CONCAVE BELT CONVEYOR W/DRIVE

-BARK HOG RADER MODEL CA05-0708A 300HP 460 VOLT 1190 RPM MOTOR

-45’ ALL STEEL WASTE CONVEYOR W/LADDERBACK CHAIN W/S DRIVE

-BLACK CLAWSON CHIPPER 120” 12 KNIFE 2000HP MOTOR * BRAND NEW DISC & SPARE MOTOR

-2000HP DIRECT MOTOR FOR CHIPPER

-42”X155’ INCLINE CONCAVE BELT CONVEYOR W/DRIVE

-56’ ALL STEEL WASTE CONVEYOR W/DOUBLE LADDER BACK CHAIN *OUTFEED TO CHIPPER

-40”X140’ CONCAVE BELT CONVEYOR W/DRIVE

-48”X118’ CONCAVE RADIAL STACKER W/DRIVE

-WOODCHIP 2 SECTION DIVERTER

-42”X142’ INCLINE CONCAVE BELT CONVEYOR *COMING FROM UNDER CHIP SCREENS

-24”X52’ INCLINE CONCAVE BELT CONVEYOR *FROM CHIP CONVEYOR

-BM&M 10’X20’ HIGH VOLUME CHIP SCREEN SN# 12339A W/15HP MOTOR

-BM&M 10’X20’ HIGH VOLUME CHIP SCREEN SN# 12899E W/15HP MOTOR

-20”X45’ BELT CONVEYOR W/DRIVE

-JEFFERY MODEL 30 CHIP SIZER W/50HP MOTOR SN# 886883

-42”X138’ WASTE CONVEYOR W/DRIVE *LOCATED UNDER DRUM DEBARKER

 

BUILDING

-22’X30’ PREFAB CHIPPER BUILDING

 

 

 

 

 

 

PARTS ROOM

 

-C&M HOIST CHAIN

-LOT OF COLLAPSIBLE STEEL SHELVING

-INGERSOLL RAND 3HP UPRIGHT TANK MOUNTED AIR COMPRESSOR W/C&D AIR DRYER

-MISC. CHAIN, BEARINGS, SPROCKETS, PULLIES, GEAR DRIVES, HYDRAULIC PUMPS, BELT LACING,

BOLT BINS, STEEL WORK TABLE, METAL CART, FIRE EXTINGUISHERS, 2 SHOP VACS, HYDRAULIC HOSE FITTINGS

 

 

 

 

 

MISC.

 

-TANDEM AXLE MILITARY PINTLE HITCH *FOR MOVING TRAILERS

-LOT OF 28” THIN KERF GANG SAWS

-HYDRAULIC POWER PACK SYSTEM W/20HP MOTOR/10HP MOTOR

-NOT INSTALLED 30:X28’ INCLINE CONCAVE BELT CONVEYOR W/DRIVE

-LOT OF SPARE CONCAVE ROLLS

-STEEL WORK CABINET

-SPARE DRIVE & SPROCKET FOR LADDERBACK CONVEYOR

-MORRISON MODEL 24 REGRINDER

-MISC GEAR DRIVES

-EXTRA 132 CHAIN

-(2) SLIP ON BUCKETS FOR FRONTEND LOADERS

-(3) AIR STORAGE TANKS

-PALLET OF NEW 132 CHAIN

-OXYGEN & ACETYLENE SAFETY CAGE

-PORTABLE PRESSURE WASHER SYSTEM W/BURNER W/BRIGGS 16HP GAS ENGINE; MOUNTED ON TANDEM AXLE TRAILER; W/HOSE REELS & WATER TANK

-MANUAL GREASE PUMP’

-AIR OPERATED GREASE PUMP

-PROCOOL PORTABLE COOLING SYSTEM

-RIGID PIPE THREADER

-MISC ELECTRICAL BOXES- DISCONNECTS & STARTERS  NOT INSTALLED

-LOT OF MISC MOTORS

-AIRTEK MODEL TWP500 COMPUTERIZED AIR DRYING SYSTEM

-(2) QUINCY 100HP SCREW TYPE AIR COMPRESSORS

-LINCOLN IDEALARC MODEL R3R300 WELDER

-MISC BELTING

-OFFICE FURNITURE-DESK, CHAIR, FILING CABINET, CONFERENCE TABLE

-MACHINE LATHE

-DRILL PRESS

-CHIPPER KNIFE GRINDER

 

 

 

 

ELECTRICAL

 

-CUTLER HAMMER 15 SECTION MCC CONTROL PANEL W/2 TRANSFORMERS

-CUTLER HAMMER 12 SECTION MCC CONTROL PANEL

-(2) ABB PAD MOUNT TRANSFORMERS

-CUTLER HAMMER 5 SECTION MCC

-PLC CONTROL BOX

-CUTLER HAMMER 60 KVA TRANSFORMER

-MULTIPLE STARTER BOX- W/3 SIZE 2 STARTERS W/3 VARIABLE SPEED CONTROLLERS

-CUTLER HAMMER 2000HP FULL VOLTAGE MOTOR STARTER W/DYNATRO BREAK CONTROLLER

-BENSHAW 300HP SOFT TYPE STARTER

-BENSHAW 300HP SOFT TYPE STARTER

-CURTIS 75HP SOFT TYPE STARTER

-SIEMENS #4 STARTER W/DISCONNECT

-CUTLER HAMMER 30HP SOFT TYPE STARTER

-CUTLER HAMMER 5 SETION MCC PANEL

LOTS OF CONDUIT & WIRING

 

 

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Other Sales by
This Company

Jan 25
INEZ, KY



Sponsored Links

HIGHLANDS ACQUISITION LLC

Tri-State Auction & Realty, LLC

Tri-State Auction & Realty, LLC


Contact: James Savage
Phone: 865-376-7009
Sale Location
1031 CHIP MILL ROAD
CLINTWOOD, VA 24225
Sale Dates and Times
Saturday Mar 28, 2020 Completed
Saturday Sep 19, 2020 Completed
Sale Terms and Conditions
WE DO ACCEPT CREDIT CARDS. PAYMENT IN FULL REQUIRED DAY OF AUCTION UNLESS APPROVED BY AUCTIONEER BEFORE THE AUCTION. NEW BIDDERS BANK LETTER OF GUARANTEE OR REFUNDABLE DEPOSIT OF 25 PERCENT OF MAXIMUM ANTICIPATED BID IS REQUIRED IN ORDER TO BE APPROVED TO BID. FAX LETTER TO 865.376.9103 OR CALL 800.334.4395 OR EMAIL auctions@tristate-auction.com FOR WIRING INSTRUCTIONS. All descriptions are conscientiously described by the Seller and Auction Company, however, neither assume any liability for errors or omissions. Everything is sold "as is where is" with no expressed or implied warranties. No guarantee of merchant ability or suitability for intended usage is given or implied. The successful bidder is responsible for their lot from the time the auctioneer calls item sold. Neither the Auction Company nor the Seller assumes responsibility for any loss, damage or theft occurring after the hammer falls. Neither the Auction Company nor the Seller assumes any responsibility for any injuries suffered while inspecting, buying or removing equipment. Jurisdiction and venue regarding any legal dispute arising here from shall be held in (LOCATION). Most states require collection of sales tax on machinery purchases unless buyer can furnish a valid sales and use tax exemption number from your state. NOTE: Some states do not accept out of state direct pay permits.
Listing Details

Highlands Acquisition, LLC.

1031 CHIP MILL ROAD

CLINTWOOD VA 24225

 

JAMES SAVAGE TN LIC# 5120

 VA LIC # 2906000193

DIRECTIONS: FROM POUND VA- AT JUNCTION OF 23 BUSINESS GO EAST ON 83 FOR 3.5 MILES. TURN RIGHT ON TO 361S , GO 1.5 MILES, TURN LEFT ONTO GRAVEL ROAD. STAY RIGHT-FOLLOW GRAVEL ROAD TO SALE SITE.

 

 

 

 

CHIP MILL

-radius crane all electrical w/ Mack grapple

-PRICE 9’ X 80’ DRUM DEBARKER W/DRIVES & CATWALK

-98’ INFEED LOG TROUGH W/6 STRAND 132 CHAIN W/DRIVE *TO THE DRUM DEBARKER*

-45’ OUTFEED LOG TROUGH W/4 STRAND 132 CHAIN W/DRIVE

-HUOT 22’ ENDWISE LOG TROUGH W/2 STRAND 132 CHAIN W/DRIVE

-HUOT 22’ 2 STRAND 87 CHAIN W/LOG POST W/DRIVE

-24”X26’ LOG TROUGH STYLE BELT CONVEYOR W/DRIVE

-70’ LOG TROUGH W/4 STRAND 132 CHAIN W/DRIVE * INFEED TO CHIPPER

-BARKO 160D STATIONARY KNUCKLEBOOM SN# 22550 W/CONTINUOUS GRAPPLE, 75HP ELECTRIC       MOTOR *HAS FIRE DAMAGE

-MURRAY MANUFACTURING LOG SPLITTER W/40HP HYDRAULIC POWER PACK

-40”X105’ INCLINE CONCAVE BELT CONVEYOR W/DRIVE *OUTFEED BELT CONVEYOR OF RADER HOG

-32”X75’ INCLINE CONCAVE BELT CONVEYOR W/DRIVE

-BARK HOG RADER MODEL CA05-0708A 300HP 460 VOLT 1190 RPM MOTOR

-45’ ALL STEEL WASTE CONVEYOR W/LADDERBACK CHAIN W/S DRIVE

-BLACK CLAWSON CHIPPER 120” 12 KNIFE 2000HP MOTOR * BRAND NEW DISC & SPARE MOTOR

-2000HP DIRECT MOTOR FOR CHIPPER

-42”X155’ INCLINE CONCAVE BELT CONVEYOR W/DRIVE

-56’ ALL STEEL WASTE CONVEYOR W/DOUBLE LADDER BACK CHAIN *OUTFEED TO CHIPPER

-40”X140’ CONCAVE BELT CONVEYOR W/DRIVE

-48”X118’ CONCAVE RADIAL STACKER W/DRIVE

-WOODCHIP 2 SECTION DIVERTER

-42”X142’ INCLINE CONCAVE BELT CONVEYOR *COMING FROM UNDER CHIP SCREENS

-24”X52’ INCLINE CONCAVE BELT CONVEYOR *FROM CHIP CONVEYOR

-BM&M 10’X20’ HIGH VOLUME CHIP SCREEN SN# 12339A W/15HP MOTOR

-BM&M 10’X20’ HIGH VOLUME CHIP SCREEN SN# 12899E W/15HP MOTOR

-20”X45’ BELT CONVEYOR W/DRIVE

-JEFFERY MODEL 30 CHIP SIZER W/50HP MOTOR SN# 886883

-42”X138’ WASTE CONVEYOR W/DRIVE *LOCATED UNDER DRUM DEBARKER

 

BUILDING

-22’X30’ PREFAB CHIPPER BUILDING

 

 

 

 

 

 

PARTS ROOM

 

-C&M HOIST CHAIN

-LOT OF COLLAPSIBLE STEEL SHELVING

-INGERSOLL RAND 3HP UPRIGHT TANK MOUNTED AIR COMPRESSOR W/C&D AIR DRYER

-MISC. CHAIN, BEARINGS, SPROCKETS, PULLIES, GEAR DRIVES, HYDRAULIC PUMPS, BELT LACING,

BOLT BINS, STEEL WORK TABLE, METAL CART, FIRE EXTINGUISHERS, 2 SHOP VACS, HYDRAULIC HOSE FITTINGS

 

 

 

 

 

MISC.

 

-TANDEM AXLE MILITARY PINTLE HITCH *FOR MOVING TRAILERS

-LOT OF 28” THIN KERF GANG SAWS

-HYDRAULIC POWER PACK SYSTEM W/20HP MOTOR/10HP MOTOR

-NOT INSTALLED 30:X28’ INCLINE CONCAVE BELT CONVEYOR W/DRIVE

-LOT OF SPARE CONCAVE ROLLS

-STEEL WORK CABINET

-SPARE DRIVE & SPROCKET FOR LADDERBACK CONVEYOR

-MORRISON MODEL 24 REGRINDER

-MISC GEAR DRIVES

-EXTRA 132 CHAIN

-(2) SLIP ON BUCKETS FOR FRONTEND LOADERS

-(3) AIR STORAGE TANKS

-PALLET OF NEW 132 CHAIN

-OXYGEN & ACETYLENE SAFETY CAGE

-PORTABLE PRESSURE WASHER SYSTEM W/BURNER W/BRIGGS 16HP GAS ENGINE; MOUNTED ON TANDEM AXLE TRAILER; W/HOSE REELS & WATER TANK

-MANUAL GREASE PUMP’

-AIR OPERATED GREASE PUMP

-PROCOOL PORTABLE COOLING SYSTEM

-RIGID PIPE THREADER

-MISC ELECTRICAL BOXES- DISCONNECTS & STARTERS  NOT INSTALLED

-LOT OF MISC MOTORS

-AIRTEK MODEL TWP500 COMPUTERIZED AIR DRYING SYSTEM

-(2) QUINCY 100HP SCREW TYPE AIR COMPRESSORS

-LINCOLN IDEALARC MODEL R3R300 WELDER

-MISC BELTING

-OFFICE FURNITURE-DESK, CHAIR, FILING CABINET, CONFERENCE TABLE

-MACHINE LATHE

-DRILL PRESS

-CHIPPER KNIFE GRINDER

 

 

 

 

ELECTRICAL

 

-CUTLER HAMMER 15 SECTION MCC CONTROL PANEL W/2 TRANSFORMERS

-CUTLER HAMMER 12 SECTION MCC CONTROL PANEL

-(2) ABB PAD MOUNT TRANSFORMERS

-CUTLER HAMMER 5 SECTION MCC

-PLC CONTROL BOX

-CUTLER HAMMER 60 KVA TRANSFORMER

-MULTIPLE STARTER BOX- W/3 SIZE 2 STARTERS W/3 VARIABLE SPEED CONTROLLERS

-CUTLER HAMMER 2000HP FULL VOLTAGE MOTOR STARTER W/DYNATRO BREAK CONTROLLER

-BENSHAW 300HP SOFT TYPE STARTER

-BENSHAW 300HP SOFT TYPE STARTER

-CURTIS 75HP SOFT TYPE STARTER

-SIEMENS #4 STARTER W/DISCONNECT

-CUTLER HAMMER 30HP SOFT TYPE STARTER

-CUTLER HAMMER 5 SETION MCC PANEL

LOTS OF CONDUIT & WIRING

 

 

Gallery Images Loading, Please Wait...
  • Home
  • Advertise Your Estate Sale for $39
  • Hire an Estate Sale Company
  • Add Your Estate Sale Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
HIGHLANDS ACQUISITION LLC
 Live Auction
 
Sale Date(s)
Saturday Mar 28, 2020 Completed
Saturday Sep 19, 2020 Completed
Sale Location

CLINTWOOD, VA 24225
Company
Listing Terms and Conditions
WE DO ACCEPT CREDIT CARDS. PAYMENT IN FULL REQUIRED DAY OF AUCTION UNLESS APPROVED BY AUCTIONEER BEFORE THE AUCTION. NEW BIDDERS BANK LETTER OF GUARANTEE OR REFUNDABLE DEPOSIT OF 25 PERCENT OF MAXIMUM ANTICIPATED BID IS REQUIRED IN ORDER TO BE APPROVED TO BID. FAX LETTER TO 865.376.9103 OR CALL 800.334.4395 OR EMAIL auctions@tristate-auction.com FOR WIRING INSTRUCTIONS. All descriptions are conscientiously described by the Seller and Auction Company, however, neither assume any liability for errors or omissions. Everything is sold "as is where is" with no expressed or implied warranties. No guarantee of merchant ability or suitability for intended usage is given or implied. The successful bidder is responsible for their lot from the time the auctioneer calls item sold. Neither the Auction Company nor the Seller assumes responsibility for any loss, damage or theft occurring after the hammer falls. Neither the Auction Company nor the Seller assumes any responsibility for any injuries suffered while inspecting, buying or removing equipment. Jurisdiction and venue regarding any legal dispute arising here from shall be held in (LOCATION). Most states require collection of sales tax on machinery purchases unless buyer can furnish a valid sales and use tax exemption number from your state. NOTE: Some states do not accept out of state direct pay permits.

Highlands Acquisition, LLC.

1031 CHIP MILL ROAD

CLINTWOOD VA 24225

 

JAMES SAVAGE TN LIC# 5120

 VA LIC # 2906000193

DIRECTIONS: FROM POUND VA- AT JUNCTION OF 23 BUSINESS GO EAST ON 83 FOR 3.5 MILES. TURN RIGHT ON TO 361S , GO 1.5 MILES, TURN LEFT ONTO GRAVEL ROAD. STAY RIGHT-FOLLOW GRAVEL ROAD TO SALE SITE.

 

 

 

 

CHIP MILL

-radius crane all electrical w/ Mack grapple

-PRICE 9’ X 80’ DRUM DEBARKER W/DRIVES & CATWALK

-98’ INFEED LOG TROUGH W/6 STRAND 132 CHAIN W/DRIVE *TO THE DRUM DEBARKER*

-45’ OUTFEED LOG TROUGH W/4 STRAND 132 CHAIN W/DRIVE

-HUOT 22’ ENDWISE LOG TROUGH W/2 STRAND 132 CHAIN W/DRIVE

-HUOT 22’ 2 STRAND 87 CHAIN W/LOG POST W/DRIVE

-24”X26’ LOG TROUGH STYLE BELT CONVEYOR W/DRIVE

-70’ LOG TROUGH W/4 STRAND 132 CHAIN W/DRIVE * INFEED TO CHIPPER

-BARKO 160D STATIONARY KNUCKLEBOOM SN# 22550 W/CONTINUOUS GRAPPLE, 75HP ELECTRIC       MOTOR *HAS FIRE DAMAGE

-MURRAY MANUFACTURING LOG SPLITTER W/40HP HYDRAULIC POWER PACK

-40”X105’ INCLINE CONCAVE BELT CONVEYOR W/DRIVE *OUTFEED BELT CONVEYOR OF RADER HOG

-32”X75’ INCLINE CONCAVE BELT CONVEYOR W/DRIVE

-BARK HOG RADER MODEL CA05-0708A 300HP 460 VOLT 1190 RPM MOTOR

-45’ ALL STEEL WASTE CONVEYOR W/LADDERBACK CHAIN W/S DRIVE

-BLACK CLAWSON CHIPPER 120” 12 KNIFE 2000HP MOTOR * BRAND NEW DISC & SPARE MOTOR

-2000HP DIRECT MOTOR FOR CHIPPER

-42”X155’ INCLINE CONCAVE BELT CONVEYOR W/DRIVE

-56’ ALL STEEL WASTE CONVEYOR W/DOUBLE LADDER BACK CHAIN *OUTFEED TO CHIPPER

-40”X140’ CONCAVE BELT CONVEYOR W/DRIVE

-48”X118’ CONCAVE RADIAL STACKER W/DRIVE

-WOODCHIP 2 SECTION DIVERTER

-42”X142’ INCLINE CONCAVE BELT CONVEYOR *COMING FROM UNDER CHIP SCREENS

-24”X52’ INCLINE CONCAVE BELT CONVEYOR *FROM CHIP CONVEYOR

-BM&M 10’X20’ HIGH VOLUME CHIP SCREEN SN# 12339A W/15HP MOTOR

-BM&M 10’X20’ HIGH VOLUME CHIP SCREEN SN# 12899E W/15HP MOTOR

-20”X45’ BELT CONVEYOR W/DRIVE

-JEFFERY MODEL 30 CHIP SIZER W/50HP MOTOR SN# 886883

-42”X138’ WASTE CONVEYOR W/DRIVE *LOCATED UNDER DRUM DEBARKER

 

BUILDING

-22’X30’ PREFAB CHIPPER BUILDING

 

 

 

 

 

 

PARTS ROOM

 

-C&M HOIST CHAIN

-LOT OF COLLAPSIBLE STEEL SHELVING

-INGERSOLL RAND 3HP UPRIGHT TANK MOUNTED AIR COMPRESSOR W/C&D AIR DRYER

-MISC. CHAIN, BEARINGS, SPROCKETS, PULLIES, GEAR DRIVES, HYDRAULIC PUMPS, BELT LACING,

BOLT BINS, STEEL WORK TABLE, METAL CART, FIRE EXTINGUISHERS, 2 SHOP VACS, HYDRAULIC HOSE FITTINGS

 

 

 

 

 

MISC.

 

-TANDEM AXLE MILITARY PINTLE HITCH *FOR MOVING TRAILERS

-LOT OF 28” THIN KERF GANG SAWS

-HYDRAULIC POWER PACK SYSTEM W/20HP MOTOR/10HP MOTOR

-NOT INSTALLED 30:X28’ INCLINE CONCAVE BELT CONVEYOR W/DRIVE

-LOT OF SPARE CONCAVE ROLLS

-STEEL WORK CABINET

-SPARE DRIVE & SPROCKET FOR LADDERBACK CONVEYOR

-MORRISON MODEL 24 REGRINDER

-MISC GEAR DRIVES

-EXTRA 132 CHAIN

-(2) SLIP ON BUCKETS FOR FRONTEND LOADERS

-(3) AIR STORAGE TANKS

-PALLET OF NEW 132 CHAIN

-OXYGEN & ACETYLENE SAFETY CAGE

-PORTABLE PRESSURE WASHER SYSTEM W/BURNER W/BRIGGS 16HP GAS ENGINE; MOUNTED ON TANDEM AXLE TRAILER; W/HOSE REELS & WATER TANK

-MANUAL GREASE PUMP’

-AIR OPERATED GREASE PUMP

-PROCOOL PORTABLE COOLING SYSTEM

-RIGID PIPE THREADER

-MISC ELECTRICAL BOXES- DISCONNECTS & STARTERS  NOT INSTALLED

-LOT OF MISC MOTORS

-AIRTEK MODEL TWP500 COMPUTERIZED AIR DRYING SYSTEM

-(2) QUINCY 100HP SCREW TYPE AIR COMPRESSORS

-LINCOLN IDEALARC MODEL R3R300 WELDER

-MISC BELTING

-OFFICE FURNITURE-DESK, CHAIR, FILING CABINET, CONFERENCE TABLE

-MACHINE LATHE

-DRILL PRESS

-CHIPPER KNIFE GRINDER

 

 

 

 

ELECTRICAL

 

-CUTLER HAMMER 15 SECTION MCC CONTROL PANEL W/2 TRANSFORMERS

-CUTLER HAMMER 12 SECTION MCC CONTROL PANEL

-(2) ABB PAD MOUNT TRANSFORMERS

-CUTLER HAMMER 5 SECTION MCC

-PLC CONTROL BOX

-CUTLER HAMMER 60 KVA TRANSFORMER

-MULTIPLE STARTER BOX- W/3 SIZE 2 STARTERS W/3 VARIABLE SPEED CONTROLLERS

-CUTLER HAMMER 2000HP FULL VOLTAGE MOTOR STARTER W/DYNATRO BREAK CONTROLLER

-BENSHAW 300HP SOFT TYPE STARTER

-BENSHAW 300HP SOFT TYPE STARTER

-CURTIS 75HP SOFT TYPE STARTER

-SIEMENS #4 STARTER W/DISCONNECT

-CUTLER HAMMER 30HP SOFT TYPE STARTER

-CUTLER HAMMER 5 SETION MCC PANEL

LOTS OF CONDUIT & WIRING