FREE EMAIL NOTIFICATIONS
estate sales & auctions delivered to your inbox

THIS IS A COMPLETED SALE
View current listings by this company

May Online Equipment Consignment Auction
Listing ID#: 315996

Sale Location
Milan, MN 56262

Sale Dates and TimesSALE IS COMPLETED
Bidding Starts: Thursday May 7, 10:00 AM Bidding Ends: Monday May 18, 6:00 PM

Sale Type
Online Auction (local pick-up only) VIEW ONLINE CATALOG

Company Information
Fragodt Auction and Real Estate LLC Contact: Jacob Fragodt Phone: 320-734-4408 Email: Info@FragodtAuctions.com Website: https://fragodtauctions.hibid.com/auctions/ EstateSale.com ID#: 13006 View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area! You may set up alerts by area (zip and radius), keywords, and by company. It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
There is a 10% buyers premium in effect with a cap of $1,000 per item. ALL ITEMS MUST BE PICKED UP WITHIN 30 DAYS OR COULD BE SUBJECT TO STORAGE AND HANDLING FEES. AFTER 60 DAYS THE ITEMS WILL BE CONSIDERED ABANDONED AND BE RESOLD. By accepting the terms and conditions of this auction you acknowledge that you are entering into a legal and binding contract. Everything sells "AS IS" and "Where Is". Information obtained was furnished by sources deemed reliable; however, neither the owners not the auction company guarantees this information to be correct. All items are open to public inspection. It is the Bidder's responsibility to determine condition, age, genuineness, value, or any other factor. Fragodt Auction Company will not be responsible for any errors or omissions in the description of the item. All auctions are with reserve unless specifically stated otherwise and Fragodt Auction Compnay reserves the right to place a reserve bid on behalf of the seller. After an item is won on an auction, the buyer gives up all rights of inspecting that item before making payment. A 10% Buyers Premium with a maximum charge of $1,000.00 per items is in effect on this auction. Payment Options: Cash, Check, Credit Card, Wire Transfer A 3% Surcharge will be added to all Credit Card Invoices and a $20 fee will apply to all wire transfers. No items will be released until full payment has cleared our office. **PAYMENT MUST BE RECEIVED BY THE FRIDAY AFTER AUCTION CLOSE!

Listing Terms and Conditions

There is a 10% buyers premium in effect with a cap of $1,000 per item.

ALL ITEMS MUST BE PICKED UP WITHIN 30 DAYS OR COULD BE SUBJECT TO STORAGE AND HANDLING FEES. AFTER 60 DAYS THE ITEMS WILL BE CONSIDERED ABANDONED AND BE RESOLD.

By accepting the terms and conditions of this auction you acknowledge that you are entering into a legal and binding contract. Everything sells "AS IS" and "Where Is". Information obtained was furnished by sources deemed reliable; however, neither the owners not the auction company guarantees this information to be correct. All items are open to public inspection. It is the Bidder's responsibility to determine condition, age, genuineness, value, or any other factor. Fragodt Auction Company will not be responsible for any errors or omissions in the description of the item. All auctions are with reserve unless specifically stated otherwise and Fragodt Auction Compnay reserves the right to place a reserve bid on behalf of the seller.

After an item is won on an auction, the buyer gives up all rights of inspecting that item before making payment.
A 10% Buyers Premium with a maximum charge of $1,000.00 per items is in effect on this auction.

Payment Options:
Cash, Check, Credit Card, Wire Transfer
*A 3% Surcharge will be added to all Credit Card Invoices and a $20 fee will apply to all wire transfers.
**No items will be released until full payment has cleared our office.
***PAYMENT MUST BE RECEIVED BY THE FRIDAY AFTER AUCTION CLOSE!

Listing Information
Tractors: 1981 John Deere 4440, Quad Range, 11,450 hours, Heat/AC, 3 hydraulics, 540/1000 PTO, 3 point, 18.4R38 rears, with John Deere 265 loader, pallet forks, and 7’ bucket, SN: 043933R Oliver 880 2wd tractor with 345 Dual Loader, wide front, power steering, PTO live pump, live PTO, snow bucket, chains and bale spear, all rebuilt cylinders on loader, 15.5-38 rear tires, just added fluid to rear tires 1971 International Farmall 1066 Turbo, diesel, 18.4-38 rears, 540/1000 PTO, 3pt, rear HID lights, roll bar, hrs unknon, SN: 2610159U007511 1950 John Deere G, Older Restoration, new tires, Overhaled, Runs as it Should, SN: 43492 1928 John Deere D, on Steel, Engine is NOT stuck, Not Running, Needs a Mag, with Lugs and Rings, SN: 70214 Sprayers: 2011 Top Air TA 1200, 90’ boom, adjustable axles, single tires, SN: B29 950 108 WilRich 3pt mounted sprayer, 500 gallon, 60’ boom, has foam (not on sprayer, but goes with) Hardy TR500 41.5’ pull type sprayer, 3 piston pump, 3 section shut off with controller box, SN: 190317 Redball 670 Sprayer, 80’ booms with Hydraulic Fold, Raven 450 Monitor, working order, has not been used in a couple of years, SN: 04-02259 Hardi Navigator 1000, 60’ boom, 3 way nozzles (blue new last year), 13.6-38 good rubber, 1000 PTO, fresh water tank, adjustable axles, Hardi Monitor and boom control with joystick for fold out, SN: 10250 Ag Chem 180 gal saddle tanks w/brackets off JD 4640, Raven sprayer control, pump in unknown condition Planting/Seed Equipment: USC, LLC MX2500 Seed Treater and Control Box, Fully Automated with Fully Automated bin site control, (up to 4 bins), Treated Bypass, Software Version 1.3, Stainless Steel Drum, with 15,000lb hopper, everything is in working order Friesen Seed Titan Seed Tender, Honda 5.5 HP motor, SN: 23078 John Deere 1520 20’ Grain Press Drill, 3pt, SN: 665102 John Deere 7300 Maxi Merge Planter, 12 Row 22”, vacuum, Precision corn plates, lift assist, 250 John Deere monitor, always shedded, SN: 107500 John Deere Model 8300 Drill, 13’, 6” spacing with grass seeder, press wheel attachment, SN: 048444N Hiniker 4836 air seeder, 40, 15” spacing, Hiniker monitor, seed rebounders, 425/65R22.5 good rubber, in working order International 800 Cyclo planter, 12 row 30”, corn and bean drums, liquid fertilizer setup (unknown working condition), has Monitor, SN: 14965 John Deere 2 row wheel driven corn planter with markers (12) Seed tubes for John Deere planter with sensors (12) Total tubular for liquid fertilizer on John Deere planter Tillage Equipment: Sunflower 1435 Disk, 29.5’, good disks, 3 bar coil tine harrow, one owner, hyd leveling, tandems on wings, front gauge wheels, 12.5L-15FI rubber, SN: 1435108366 John Deere 980 Field Cultivator, 42.5’, walking tandems, 3 bar coil tine harrow, rear hitch, SN: 010967 International 4500 Field Cultivator, 30’, fold up wings, 3 bar harrow (all sweeps, tines on drags and bushings replaced 100 acres ago) 16/22 Cultivator, can be made into a 12/30, fold up wings, Brand unknown Phoenix H14 42’ Rotary Harrow John Deere 400 Rotary Hoe Kewanne Model 1100 disc, 21’, with fold up wings, 18” blades, 8.5” spacing, tandem axles, 2 bar Noble harrow Alloway Model 2135 3pt cultivator, 12/22, rolling shields Dakon 12/22 rear mount cultivator, rolling shields, Danish teeth Sunfower 7252-40 Rolling Basket Crumbler, 40’, SN: 20060008 IHC 183 Cultivator, 8 row 30” with rolling shields, good shape IHC 490, 20’ Disk with hydraulic wings, good shape International 183 Cultivator, 16 Row 30”, hydraulic flat fold wings, 3pt IH Model 710 Plow, 4-18’s, auto trip Trucks: 1990 Freightliner Semi Tractor, CAT 3406 engine, 10 speed transmission, 1.125 Million Miles, 11R22.5 rubber, dual fuel tanks, sleeper, VIN: 392412 GMC Top Kick feed truck, Twin Screw, 3208 CAT engine, 10 speed transmission, 20’ Box with 4 compartments, 11R22.5 Rears, 11R22.5 Fronts (radials) 1973 Chevrolet C65 Grain Truck, 14’ box and hoist, holds 300 bushels, twin cylinder hoist, 10:00x20 rubber, 5+2 trans, VIN: 162183 Snow Blower: Buhler/Allied 9620 dual stage 8’ snow blower, 540 PTO, hydraulic spout, SN: 96004903 Hay Equipment: 2014 New Holland 560 Round Baler, Approx 2150 bales, Specialty Crop, 1000 PTO, Net Wrap, Monitor Included, 21.5L-16.1 tires, SN: 182798 Accelerator for a 5000 Series John Deere silage cutter Sitrex 3pt 5 wheel rake, used very little, SN: 261219 Dryers/Grain Bin Equipment: AB 250 dryer, single phase, LP, has been gone through ready for 2020 Handlair Model 2100 Vaculator, 5” tubing, 1000 PTO, includes factory update on this model, (3) 10’ solid tubes, (1) 5’, (1) 2.5’, includes all hookups needed for 15’ flex, SN: 8410028 Vertical 8” to 10” bin unload, PTO drive One yar old Sukup 27’ bin flooring, no stands or flashing Unload auger with jump for 24’ bin, 6” auger, no motor Livestock Equipment: 9’ Loading Chute on wheels 15’ Cattle crossing grate for driveway, 5’ wide Misc pile of 16’ cattle and hog panels, approx. 10 140 gallon oval water tank (2) 16’ Northwest Brand hog gates True Test MP1010 Multi Purpose Chute, sheep or goats, no scale heat, 4400lb live capacity Cattle Chute with Headgate and squeeze 25 electric fence posts, step in 25 electric fence posts, step in 25 electric fence posts, step in 25 electric fence posts, step in 25 electric fence posts, step in Barrel of misc fiberglass electric fence posts Pallet of 25 count T-Posts Pallet of 25 count T-Posts Misc pile of assorted metal posts 2 speed reels with Turbo wire on them 2 cattle dehorners 300 Livestock Eartags Misc fence wire, some Hi-tensile (8) 8’ cement feed bunks (4) 8’ cement feed bunks (3) 8’ cement feed bunks, and (1) 4’ cement feed bunk Gehl 860 Silage Chopper with 2 row 3038 Chopping head, SN: 8685, Head SN: 13479 Gehl 800 Chopper to be sold for parts, the chopping head is still good, along with the knives, a bearing went out on the machine (10) 20’x6 bar continuous fence panels, with clips and connectors (10) 20’x6 bar continuous fence panels, with clips and connectors (10) 20’x6 bar continuous fence panels, with clips and connectors (10) 20’x6 bar continuous fence panels, with clips and connectors (4) 8’ wood fence posts (4) 8’ wood fence posts (4) 8’ wood fence posts (4) 8’ wood fence posts (4) 8’ wood fence posts (4) 8’ wood fence posts (3) Wood fence posts, (2) 15’, (1) 14’ (6) 17’ fence posts (5) 8’ Cement Feedbunks (5) 8’ Cement Feedbunks (5) 8’ Cement Feedbunks Misc Electric wire and fence posts Feed bunk cable Round bale feeder MC Model 9D 9’ Flail Chopper, pull type, 540 PTO, with Rollers, SN: 23468 4’ x 17’ cattle gate Cement Feedbunks, approx. 18, various sizes on conditions, some need work (90) 2nd cutting Alfalfa/Grass mixture bales, baled with New Holland 7090 baler and new wrapped. Approx 1,700lbs Lawn and Garden/Recreation: John Deere 425 All Wheel Steer 60” Lawn Mower, 2,088 hours, Power Steering, hydraulic deck lift, hydro drive, liquid cooled 20 hp John Deere Series K engine, electric PTO, SN: 023677 2009 John Deere X724 Lawn mower W/ John Deere 647 48'' rotary tiller, 62'' deck, 4 front weights, 4 wheel steer, 351 hours, cruise control, 25 horsepower engine, Mower SN: A040644, Tiller SN: B031326 2009 John Deere X724 Lawn Mower, 62” deck w/John Deere 647 48” rotary tiller, 4 front weights, All Wheel Steer, 351 hours, cruise control, 25hp engine, Mower SN: A040644, Tiller SN: B031326 Woods 1850 zero turn lawn mower, 50” deck, 3 blade, chain drive, engine was replaced with 20hp Briggs V-Twin, good tires, runs, hours unknown Woods RD8400 3pt finishing mower, 6’, 540 PTO, SN: 7294119 Woods Model M5 Dixie Cutter Chopping Mower, 3pt, 5’, 540 PTO, SN: 105061 Craftsman Hi Performance Lawn Sweeper, approx. 42”, self dumping 2007 ADLY Her Chee 150cc moped, 4,570 miles, kick start and electric start with a new battery, 4 stroke motor, disk brakes, comes with helmet and saddle bags, good runner, VIN: 000100 1989 Suntracker 24’ Partybarge w/Mariner 90 hp 2 stroke motor, (had $3,000 of work done to motor in 2019) on 4 wheel Shore Launcher pontoon trailer with lifetime license, new floor in approx. 2015, comes with 2 fuel tanks, canopy (has tear on seam), misc chairs and life jackets, ladder, Minnkota Endura trolling motor with 40lb thrust (12volt SN: 4139104), has storage and 2 spare tires (on wrong rim, but right size of tire 5.30-12), SN: 30093G889 Kawasaki KZ550 motorcycle, VIN: 001532, unknown running/working condition, has been parked inside for years Norton 750 Motorcycle, VIN: 136775, unknown running/working condition, has been parked inside for years Misc Equipment: Houle PTO Manure Pump, 540 PTO, in working order, SN: 1401-051745-R28 7’ x 13’ Rock Trailer with Hoist, good boards, hoist works, rubber is up, Lo-Boy running gear Oliver 3 bottom on land plow Crary Hydra Stinger 3pt Forklift/Bale Mover, 2 remotes, 1 remote for tilt, 1 remote for lift, 12’ Max height Allied 795 Loader w/mounting bracket and 8’ bucket, no welds, nice shape Fasse Valve Koyker K5 loader, needs some fixing, quick tach, Euro style quick tach for bucket, no bucket, John Deere mounts off 4430 17’ Jumbo Leveler off of a John Deere chisel plow Open Top Tunnel Shields, enough for 12 row cultivator FMC 3 Phase 5800 Computer Wheel Balancer with Cederberg Single to 3 Phase Converter, works good Hoffman 1610 Air Tire Machine, working order, Air Blast, 110 volt, Forward and Reverse 27’ Mayrath auger w/5hp electric motor Drill fill auger 2019 Loftness RC800 fertilizer spreader, 90 spread, hydraulic drive, variable rate ready, scale, roll tarp, extensions, Raven ISO controller M+W Little Red Wagon, approx. 400 bushel, brakes, 16.5L-16.1 rubber, two hoppers, rear hitch Skidloaders/Equipment and Construction: 2014 Bobcat S510 skid loader, 5,780 hours, 2.4L Bobcat engine, 46 hp, ROPS cab only, no door, no air/heat, SN: 11375 2011 Bobcat S650 skidloader, 2,150 hours, Kubota Interim Tier 4 engine, 74 hp, 2,690lb lift capacity, heat and AC, 2 speed, radio, Power Bobtach, Deluxe cab package, new paint, tires, and bucket (on the way), reman hydro, SN: A3NV14739 2003 Bobcat S250 skid loader, 5,205 hours, Kubota V3300 engine, 2 Speed, Cab w/Heat, LED Lights, SN: 13216 1990 Bobcat 843B, 5,500 hours, Isuzu motor, 1,700lb lift capacity, ROPS cab, new tires, paint and reman hydro, rebuild chain case, SN: 32752 1981 Bobcat 843 skidloader, 4,200 hours, Perkins engine, 1,700lb lift capacity, ROPS cab, new front reman hydro drive and rebuilt chain case, SN: 5020-M-11021 1999 New Holland LX865 Skidloader, 6868 hours (might go up), foot controls, 3^rd hydraulic, 7’ material bucket, manual tach, 31 x 15.5 rubber, SN: 102085 1987 John Deere 770B Motor Grader, blade and snow wing, 14:00-24 rubber, 11,706 hours, SN: 514901 2000 Genie GS-2032, 26’ working height, 32” wide, new batteries, been serviced and is ready to go, hour meter has been replaced CAT 7’ Skidloader Bucket, step, bolt on cutting edge Tracks off a John Deere 323E Skidloader 3 Post hole auger bits Hawz Attachments 84” brush mower (quick tach is bent) Hawz Attachments 66” rock bucket (bucket is bent) Hawz Attachments tree/post puller Hawz Attachments 74” rock bucket Hawz Attachments 79” rock bucket (quick tach is bent) Hawz Attachments 68” fork extensions Hawz Attachments 68” fork extensions Hawz Attachments solid quick tach plate Hawz Attachments quick tach plate Hawz Attachments quick tach plate Hawz Attachments receiver plate Hawz Attachments receiver palte Trailers: 1972 Wilson Flatbed Water trailer, 42’, 11R24.5 rubber, (4) 1500 gallon water tanks, Honda GX160 gas motor and pump, also includes inductor and reel with hose, VIN: 75004 Cable spool cart, could be converted to tile cart Campers: 2005 Fleetwood Excursion RV made by Winnebago, 63,959 miles, New Tires, New Batteries, Completely Loaded, everything is in working order, 350 CAT engine, Allison Automatic Transmission, Freightliner chassis, excellent condition 1992 NUWA 5^th wheel camper, 35’, 2 slides outs, queen bed and sleeper sofa, Champagne Edition, Air Hitch Hiker Model, VIN: 046143 Vehicles: 2014 Ford Explorer Police Interceptor AWD, V-6 Flex Fuel, 18” tires with good ruber, Keypad entry, full size spare, 134,954 miles, CD/AM/FM, Aux/USB, steering wheel controls, PW, PL, VIN: 79835 2004 GMC Envoy, No Keys, (running when impounded) in Neutral now, 17” tires, PW, PL, CD, dual climate control, 2” receiver hitch 1996 Ford F-250 2wd, regular cab, 137,000 miles, automatic trans, 5.0 V-8, gas, manual windows and locks, 16” tires, city owned 2005 Chevrolet Trailblazer Ext, Blown Motor, 4x4, good rubber, (65R/17), cloth seats, 3^rd row, 119,000, rear hitch 2000 Chevrolet 2500 4x4 extended cab pickup, approx. 2,000 miles on new crate engine, new tires and all new front brakes, transmission is out, needs a new transmission, have receipts for engine work 1999 Volkswagen Jetta 4 door, 2.0 L 4 cylinder engine, auto transmission, 180,000 miles, new brakes, rotors, struts, water pump and timing chain 2006 Chevrolet Trailblazer 4x4, 4 door, 190,000 miles, 6cyl engine, auto transmission, new battery, brakes, wheel bearings, water pump, and fan clutch, complete tune up 1953 (approx.) International R120 pickup, no title, it does have engine and transmission but running and working condition are unknown 2002 Ford E-450 dually, 11’ x 8’ flatbed, 7.3 diesel, 2 tool boxes, wired for a winch, 153,000 miles, automatic trans, hitch, towing mirrors, mud flaps, diamond plate running boards, VIN: 23166 Chevrolet 3500 dually, 4x4, gas, auto transmission, shows 126,000 miles, extended cab, 5^th wheel call, front bucket seats, VIN: 204199 1994 Ford F250 XL single cab, 4x4 with 8’ snowplow, hydraulic tilt, lights, 5 speed trans with overdrive, V8 engine, shows 88,081 miles 1998 Chevrolet Blazer, engine is bad, drive train is good, clean title 1969 Lincoln Continental, no title, complete engine and transmission (not running) 1954 Chevrolet Station Wagon, runs and drives, 6-cylinder, 3 speed on the column 1937 Pontiac 4 door, does not run, no title 1996 Ford F-250 2wd, regular cab, 137K miles, automatic, 5.0, gas, manual windows and locks, 16'' tires 2005 Chevrolet Trailblazer ext. Blown Motor, 4wd, good rubber (65/R17), cloth seats, 3rd row, 119k miles, rear hitch. Misc: (2) Goodyear 320/85R34 tractor fronts on 10 bolt rims (4) Goodyear 320/90R50 tractor tires, on rims, set up as duals, good rubber left Westfield Drill fill auger, hyd drive, brush auger Misc 3” Banjo fittings and valves, buying all one money Galvanized stock tank Haukass sidearm markers Tailgate lift, no brand or other information on unit 3pt Hiniker head mover Hydraulic power plant with 25hp 3 phase 480 or 2 phase 220, 1750 RPM electric motor, has hydraulic reservoir tank 12 insecticide boxes for John Deere 7000 planter with meters Honda 20 Horsepower V-Twin motor, came off portable Auger, Throttle cable has 2 new cables Roof wind deflector off 1994 Freightliner 60 series, no damage (12) Suitcase weights (blue) (5) Chemical Totes (5) Chemical Totes (5) Chemical Totes (5) Chemical Totes Bedslide retractable truck bed cargo tray, 5’ long, 47” wide, 7” tall Chevrolet Silverado Grill, Fits 2008-2012 Roll of electrical wire Dewalt Electric Vacuum Spray Systems Sprayer Control Old Safe Smith Torch Head, Lifetime warranty Case Vintage Wide Front 2-cylinder Wisconsin motor (stuck) 3 wheel weights, believed to be off Massey Ferguson Allis Chalmers 3 bottom plow, slat bottoms Wisconsin 4 cylinder engine, VH4D, engine is loose 2 wheel weights for International tractor 2 spring tooth drag sections Stan Wagon Hoist for raising flair boxes Pair of fenders off Allis Chalmers Minneapolis Moline 4 bottom pull type plow 2 antique steel wheels Pair of spoked tractor rims for rear Pair flair box wagon hoists Chevrolet truck, Early 50’s, does not run, no title, solid body 2 bottom pull type plow International 2 bottom pull type plow, slat bottoms International #9 pull type horse mower John Deere 3 bottom pull type plow, steel wheels Corn Crib, 13’ diameter, 12’ high with roof (to be moved) Corn Crib, 13’ diameter, 12’ high with roof (to be moved) Approx 142” x 6” x 6” x 3/16” Steel Square Tube with 4 Bolt Pad Approx 142” x 6” x 6” x 3/16” Steel Square Tube with 4 Bolt Pad Approx 142” x 6” x 6” x 3/16” Steel Square Tube with 4 Bolt Pad Approx 142” x 6” x 6” x 3/16” Steel Square Tube with 4 Bolt Pad Approx 142” x 6” x 6” x 3/16” Steel Square Tube with 4 Bolt Pad H-Beam, approx. 142” x 8 3/8” x 5 3/8”x ¼” steel with 4 bolt Pad H-Beam, approx. 100” x 8 3/8” x 5 3/8”x ¼” steel with 4 bolt Pad Approx 149” x 6” x 6” x 3/16” Steel Square Tube with 4 Bolt Pad and extra Piece on the L Stack of used Corrugated steel, various sizes and colors, 16 sheets ranging from 90” to 200”, 36” wide 4 sheets of brown steel, 36” wide, x 188”, used 2 sheets of tan steel, 36” wide x 222”, new Approx. 5 sheets of misc color steel, various lengths, 36” wide Approx. 8 sheets of misc color steel, 9’ – 202” long, 36” wide 30” saw blade Pair of Pull Type Plows 3 steel pieces, (2) 8” x 4” x 105”, (1) 8” x 4” x 100” (7) John Deere Planter Boxes Antique Hay Knife TowMax 225/75R15 tire on rim (6) Sodium lights in working order Stainless Steel Smoker, 110V w/Thermostat, 2 burners (one currently not working) 3 piles of misc 2x6 and 2x4 lumber 5 piles of misc 2x6, 2x4, and 2x10 lumber Fox silage chopper, 3 row narrow head and misc parts Cobey Silage wagon, right side front unload, steel floor 7' snowblower, unknown brand, 3pt, 540 pto, 2 stage, hydraulic spout, single auger Ford flail mower, 6'6'', 540 pto, 3 pt. 7' 3 point blade 5' 3 point yard drage heavy duty axle with 8-bolt hubs. (2) 30.5L-32 Firestone tires on 10 bolt rims, 14 ply off of John Deere 9570, approx. 50% 7’ snowblower, unknown brand, 3pt, 540 PTO, 2 stage, hydraulic spout, single auger Ford flail mower, 6’6”, 540 pto, 3pt 7’ 3pt blade 5’ 3point yard drag Heavy duty axle with 8 bolt hubs Steel Conveyer, approx. 20’, needs work (8) Kinze Bean Units off John Deere 7000 planter
Auction License: MN 76-12

Listing Information

Tractors:

1981 John Deere 4440, Quad Range, 11,450 hours, Heat/AC, 3 hydraulics, 540/1000 PTO, 3 point, 18.4R38 rears, with John Deere 265 loader, pallet forks, and 7’ bucket, SN: 043933R

Oliver 880 2wd tractor with 345 Dual Loader, wide front, power steering, PTO live pump, live PTO, snow bucket, chains and bale spear, all rebuilt cylinders on loader, 15.5-38 rear tires, just added fluid to rear tires

1971 International Farmall 1066 Turbo, diesel, 18.4-38 rears, 540/1000 PTO, 3pt, rear HID lights, roll bar, hrs unknon, SN: 2610159U007511

1950 John Deere G, Older Restoration, new tires, Overhaled, Runs as it Should, SN: 43492

1928 John Deere D, on Steel, Engine is NOT stuck, Not Running, Needs a Mag, with Lugs and Rings, SN: 70214

Sprayers:

2011 Top Air TA 1200, 90’ boom, adjustable axles, single tires, SN: B29 950 108

WilRich 3pt mounted sprayer, 500 gallon, 60’ boom, has foam (not on sprayer, but goes with)

Hardy TR500 41.5’ pull type sprayer, 3 piston pump, 3 section shut off with controller box, SN: 190317

Redball 670 Sprayer, 80’ booms with Hydraulic Fold, Raven 450 Monitor, working order, has not been used in a couple of years, SN: 04-02259

Hardi Navigator 1000, 60’ boom, 3 way nozzles (blue new last year), 13.6-38 good rubber, 1000 PTO, fresh water tank, adjustable axles, Hardi Monitor and boom control with joystick for fold out, SN: 10250

Ag Chem 180 gal saddle tanks w/brackets off JD 4640, Raven sprayer control, pump in unknown condition

Planting/Seed Equipment:

USC, LLC MX2500 Seed Treater and Control Box, Fully Automated with Fully Automated bin site control, (up to 4 bins), Treated Bypass, Software Version 1.3, Stainless Steel Drum, with 15,000lb hopper, everything is in working order

Friesen Seed Titan Seed Tender, Honda 5.5 HP motor, SN: 23078

John Deere 1520 20’ Grain Press Drill, 3pt, SN: 665102

John Deere 7300 Maxi Merge Planter, 12 Row 22”, vacuum, Precision corn plates, lift assist, 250 John Deere monitor, always shedded, SN: 107500

John Deere Model 8300 Drill, 13’, 6” spacing with grass seeder, press wheel attachment, SN: 048444N

Hiniker 4836 air seeder, 40, 15” spacing, Hiniker monitor, seed rebounders, 425/65R22.5 good rubber, in working order

International 800 Cyclo planter, 12 row 30”, corn and bean drums, liquid fertilizer setup (unknown working condition), has Monitor, SN: 14965

John Deere 2 row wheel driven corn planter with markers

(12) Seed tubes for John Deere planter with sensors

(12) Total tubular for liquid fertilizer on John Deere planter

Tillage Equipment:

Sunflower 1435 Disk, 29.5’, good disks, 3 bar coil tine harrow, one owner, hyd leveling, tandems on wings, front gauge wheels, 12.5L-15FI rubber, SN: 1435108366

John Deere 980 Field Cultivator, 42.5’, walking tandems, 3 bar coil tine harrow, rear hitch, SN: 010967

International 4500 Field Cultivator, 30’, fold up wings, 3 bar harrow (all sweeps, tines on drags and bushings replaced 100 acres ago)

16/22 Cultivator, can be made into a 12/30, fold up wings, Brand unknown

Phoenix H14 42’ Rotary Harrow

John Deere 400 Rotary Hoe

Kewanne Model 1100 disc, 21’, with fold up wings, 18” blades, 8.5” spacing, tandem axles, 2 bar Noble harrow

Alloway Model 2135 3pt cultivator, 12/22, rolling shields

Dakon 12/22 rear mount cultivator, rolling shields, Danish teeth

Sunfower 7252-40 Rolling Basket Crumbler, 40’, SN: 20060008

IHC 183 Cultivator, 8 row 30” with rolling shields, good shape

IHC 490, 20’ Disk with hydraulic wings, good shape

International 183 Cultivator, 16 Row 30”, hydraulic flat fold wings, 3pt

IH Model 710 Plow, 4-18’s, auto trip

Trucks:

1990 Freightliner Semi Tractor, CAT 3406 engine, 10 speed transmission, 1.125 Million Miles, 11R22.5 rubber, dual fuel tanks, sleeper, VIN: 392412

GMC Top Kick feed truck, Twin Screw, 3208 CAT engine, 10 speed transmission, 20’ Box with 4 compartments, 11R22.5 Rears, 11R22.5 Fronts (radials)

1973 Chevrolet C65 Grain Truck, 14’ box and hoist, holds 300 bushels, twin cylinder hoist, 10:00x20 rubber, 5+2 trans, VIN: 162183

Snow Blower:

Buhler/Allied 9620 dual stage 8’ snow blower, 540 PTO, hydraulic spout, SN: 96004903

Hay Equipment:

2014 New Holland 560 Round Baler, Approx 2150 bales, Specialty Crop, 1000 PTO, Net Wrap, Monitor Included, 21.5L-16.1 tires, SN: 182798

Accelerator for a 5000 Series John Deere silage cutter

Sitrex 3pt 5 wheel rake, used very little, SN: 261219

Dryers/Grain Bin Equipment:

AB 250 dryer, single phase, LP, has been gone through ready for 2020

Handlair Model 2100 Vaculator, 5” tubing, 1000 PTO, includes factory update on this model, (3) 10’ solid tubes, (1) 5’, (1) 2.5’, includes all hookups needed for 15’ flex, SN: 8410028

Vertical 8” to 10” bin unload, PTO drive

One yar old Sukup 27’ bin flooring, no stands or flashing

Unload auger with jump for 24’ bin, 6” auger, no motor

Livestock Equipment:

9’ Loading Chute on wheels

15’ Cattle crossing grate for driveway, 5’ wide

Misc pile of 16’ cattle and hog panels, approx. 10

140 gallon oval water tank

(2) 16’ Northwest Brand hog gates

True Test MP1010 Multi Purpose Chute, sheep or goats, no scale heat, 4400lb live capacity

Cattle Chute with Headgate and squeeze

25 electric fence posts, step in

Barrel of misc fiberglass electric fence posts

Pallet of 25 count T-Posts

Misc pile of assorted metal posts

2 speed reels with Turbo wire on them

2 cattle dehorners

300 Livestock Eartags

Misc fence wire, some Hi-tensile

(8) 8’ cement feed bunks

(4) 8’ cement feed bunks

(3) 8’ cement feed bunks, and (1) 4’ cement feed bunk

Gehl 860 Silage Chopper with 2 row 3038 Chopping head, SN: 8685, Head SN: 13479

Gehl 800 Chopper to be sold for parts, the chopping head is still good, along with the knives, a bearing went out on the machine

(10) 20’x6 bar continuous fence panels, with clips and connectors

(4) 8’ wood fence posts

(3) Wood fence posts, (2) 15’, (1) 14’

(6) 17’ fence posts

(5) 8’ Cement Feedbunks

Misc Electric wire and fence posts

Feed bunk cable

Round bale feeder

MC Model 9D 9’ Flail Chopper, pull type, 540 PTO, with Rollers, SN: 23468

4’ x 17’ cattle gate

Cement Feedbunks, approx. 18, various sizes on conditions, some need work

(90) 2nd cutting Alfalfa/Grass mixture bales, baled with New Holland 7090 baler and new wrapped. Approx 1,700lbs

Lawn and Garden/Recreation:

John Deere 425 All Wheel Steer 60” Lawn Mower, 2,088 hours, Power Steering, hydraulic deck lift, hydro drive, liquid cooled 20 hp John Deere Series K engine, electric PTO, SN: 023677

2009 John Deere X724 Lawn mower W/ John Deere 647 48'' rotary tiller, 62'' deck, 4 front weights, 4 wheel steer, 351 hours, cruise control, 25 horsepower engine, Mower SN: A040644, Tiller SN: B031326

2009 John Deere X724 Lawn Mower, 62” deck w/John Deere 647 48” rotary tiller, 4 front weights, All Wheel Steer, 351 hours, cruise control, 25hp engine, Mower SN: A040644, Tiller SN: B031326

Woods 1850 zero turn lawn mower, 50” deck, 3 blade, chain drive, engine was replaced with 20hp Briggs V-Twin, good tires, runs, hours unknown

Woods RD8400 3pt finishing mower, 6’, 540 PTO, SN: 7294119

Woods Model M5 Dixie Cutter Chopping Mower, 3pt, 5’, 540 PTO, SN: 105061

Craftsman Hi Performance Lawn Sweeper, approx. 42”, self dumping

2007 ADLY Her Chee 150cc moped, 4,570 miles, kick start and electric start with a new battery, 4 stroke motor, disk brakes, comes with helmet and saddle bags, good runner, VIN: 000100

1989 Suntracker 24’ Partybarge w/Mariner 90 hp 2 stroke motor, (had $3,000 of work done to motor in 2019) on 4 wheel Shore Launcher pontoon trailer with lifetime license, new floor in approx. 2015, comes with 2 fuel tanks, canopy (has tear on seam), misc chairs and life jackets, ladder, Minnkota Endura trolling motor with 40lb thrust (12volt SN: 4139104), has storage and 2 spare tires (on wrong rim, but right size of tire 5.30-12), SN: 30093G889

Kawasaki KZ550 motorcycle, VIN: 001532, unknown running/working condition, has been parked inside for years

Norton 750 Motorcycle, VIN: 136775, unknown running/working condition, has been parked inside for years

Misc Equipment:

Houle PTO Manure Pump, 540 PTO, in working order, SN: 1401-051745-R28

7’ x 13’ Rock Trailer with Hoist, good boards, hoist works, rubber is up, Lo-Boy running gear

Oliver 3 bottom on land plow

Crary Hydra Stinger 3pt Forklift/Bale Mover, 2 remotes, 1 remote for tilt, 1 remote for lift, 12’ Max height

Allied 795 Loader w/mounting bracket and 8’ bucket, no welds, nice shape

Fasse Valve

Koyker K5 loader, needs some fixing, quick tach, Euro style quick tach for bucket, no bucket, John Deere mounts off 4430

17’ Jumbo Leveler off of a John Deere chisel plow

Open Top Tunnel Shields, enough for 12 row cultivator

FMC 3 Phase 5800 Computer Wheel Balancer with Cederberg Single to 3 Phase Converter, works good

Hoffman 1610 Air Tire Machine, working order, Air Blast, 110 volt, Forward and Reverse

27’ Mayrath auger w/5hp electric motor

Drill fill auger

2019 Loftness RC800 fertilizer spreader, 90 spread, hydraulic drive, variable rate ready, scale, roll tarp, extensions, Raven ISO controller

M+W Little Red Wagon, approx. 400 bushel, brakes, 16.5L-16.1 rubber, two hoppers, rear hitch

Skidloaders/Equipment and Construction:

2014 Bobcat S510 skid loader, 5,780 hours, 2.4L Bobcat engine, 46 hp, ROPS cab only, no door, no air/heat, SN: 11375

2011 Bobcat S650 skidloader, 2,150 hours, Kubota Interim Tier 4 engine, 74 hp, 2,690lb lift capacity, heat and AC, 2 speed, radio, Power Bobtach, Deluxe cab package, new paint, tires, and bucket (on the way), reman hydro, SN: A3NV14739

2003 Bobcat S250 skid loader, 5,205 hours, Kubota V3300 engine, 2 Speed, Cab w/Heat, LED Lights, SN: 13216

1990 Bobcat 843B, 5,500 hours, Isuzu motor, 1,700lb lift capacity, ROPS cab, new tires, paint and reman hydro, rebuild chain case, SN: 32752

1981 Bobcat 843 skidloader, 4,200 hours, Perkins engine, 1,700lb lift capacity, ROPS cab, new front reman hydro drive and rebuilt chain case, SN: 5020-M-11021

1999 New Holland LX865 Skidloader, 6868 hours (might go up), foot controls, 3^rd hydraulic, 7’ material bucket, manual tach, 31 x 15.5 rubber, SN: 102085

1987 John Deere 770B Motor Grader, blade and snow wing, 14:00-24 rubber, 11,706 hours, SN: 514901

2000 Genie GS-2032, 26’ working height, 32” wide, new batteries, been serviced and is ready to go, hour meter has been replaced

CAT 7’ Skidloader Bucket, step, bolt on cutting edge

Tracks off a John Deere 323E Skidloader

3 Post hole auger bits

Hawz Attachments 84” brush mower (quick tach is bent)

Hawz Attachments 66” rock bucket (bucket is bent)

Hawz Attachments tree/post puller

Hawz Attachments 74” rock bucket

Hawz Attachments 79” rock bucket (quick tach is bent)

Hawz Attachments 68” fork extensions

Hawz Attachments solid quick tach plate

Hawz Attachments quick tach plate

Hawz Attachments receiver plate

Hawz Attachments receiver palte

Trailers:

1972 Wilson Flatbed Water trailer, 42’, 11R24.5 rubber, (4) 1500 gallon water tanks, Honda GX160 gas motor and pump, also includes inductor and reel with hose, VIN: 75004

Cable spool cart, could be converted to tile cart

Campers:

2005 Fleetwood Excursion RV made by Winnebago, 63,959 miles, New Tires, New Batteries, Completely Loaded, everything is in working order, 350 CAT engine, Allison Automatic Transmission, Freightliner chassis, excellent condition

1992 NUWA 5^th wheel camper, 35’, 2 slides outs, queen bed and sleeper sofa, Champagne Edition, Air Hitch Hiker Model, VIN: 046143

Vehicles:

2014 Ford Explorer Police Interceptor AWD, V-6 Flex Fuel, 18” tires with good ruber, Keypad entry, full size spare, 134,954 miles, CD/AM/FM, Aux/USB, steering wheel controls, PW, PL, VIN: 79835

2004 GMC Envoy, No Keys, (running when impounded) in Neutral now, 17” tires, PW, PL, CD, dual climate control, 2” receiver hitch

1996 Ford F-250 2wd, regular cab, 137,000 miles, automatic trans, 5.0 V-8, gas, manual windows and locks, 16” tires, city owned

2005 Chevrolet Trailblazer Ext, Blown Motor, 4x4, good rubber, (65R/17), cloth seats, 3^rd row, 119,000, rear hitch

2000 Chevrolet 2500 4x4 extended cab pickup, approx. 2,000 miles on new crate engine, new tires and all new front brakes, transmission is out, needs a new transmission, have receipts for engine work

1999 Volkswagen Jetta 4 door, 2.0 L 4 cylinder engine, auto transmission, 180,000 miles, new brakes, rotors, struts, water pump and timing chain

2006 Chevrolet Trailblazer 4x4, 4 door, 190,000 miles, 6cyl engine, auto transmission, new battery, brakes, wheel bearings, water pump, and fan clutch, complete tune up

1953 (approx.) International R120 pickup, no title, it does have engine and transmission but running and working condition are unknown

2002 Ford E-450 dually, 11’ x 8’ flatbed, 7.3 diesel, 2 tool boxes, wired for a winch, 153,000 miles, automatic trans, hitch, towing mirrors, mud flaps, diamond plate running boards, VIN: 23166

Chevrolet 3500 dually, 4x4, gas, auto transmission, shows 126,000 miles, extended cab, 5^th wheel call, front bucket seats, VIN: 204199

1994 Ford F250 XL single cab, 4x4 with 8’ snowplow, hydraulic tilt, lights, 5 speed trans with overdrive, V8 engine, shows 88,081 miles

1998 Chevrolet Blazer, engine is bad, drive train is good, clean title

1969 Lincoln Continental, no title, complete engine and transmission (not running)

1954 Chevrolet Station Wagon, runs and drives, 6-cylinder, 3 speed on the column

1937 Pontiac 4 door, does not run, no title

1996 Ford F-250 2wd, regular cab, 137K miles, automatic, 5.0, gas, manual windows and locks, 16'' tires

2005 Chevrolet Trailblazer ext. Blown Motor, 4wd, good rubber (65/R17), cloth seats, 3rd row, 119k miles, rear hitch.

Misc:

(2) Goodyear 320/85R34 tractor fronts on 10 bolt rims

(4) Goodyear 320/90R50 tractor tires, on rims, set up as duals, good rubber left

Westfield Drill fill auger, hyd drive, brush auger

Misc 3” Banjo fittings and valves, buying all one money

Galvanized stock tank

Haukass sidearm markers

Tailgate lift, no brand or other information on unit

3pt Hiniker head mover

Hydraulic power plant with 25hp 3 phase 480 or 2 phase 220, 1750 RPM electric motor, has hydraulic reservoir tank

12 insecticide boxes for John Deere 7000 planter with meters

Honda 20 Horsepower V-Twin motor, came off portable Auger, Throttle cable has 2 new cables

Roof wind deflector off 1994 Freightliner 60 series, no damage

(12) Suitcase weights (blue)

(5) Chemical Totes

Bedslide retractable truck bed cargo tray, 5’ long, 47” wide, 7” tall

Chevrolet Silverado Grill, Fits 2008-2012

Roll of electrical wire

Dewalt Electric Vacuum

Spray Systems Sprayer Control

Old Safe

Smith Torch Head, Lifetime warranty

Case Vintage Wide Front

2-cylinder Wisconsin motor (stuck)

3 wheel weights, believed to be off Massey Ferguson

Allis Chalmers 3 bottom plow, slat bottoms

Wisconsin 4 cylinder engine, VH4D, engine is loose

2 wheel weights for International tractor

2 spring tooth drag sections

Stan Wagon Hoist for raising flair boxes

Pair of fenders off Allis Chalmers

Minneapolis Moline 4 bottom pull type plow

2 antique steel wheels

Pair of spoked tractor rims for rear

Pair flair box wagon hoists

Chevrolet truck, Early 50’s, does not run, no title, solid body

2 bottom pull type plow

International 2 bottom pull type plow, slat bottoms

International #9 pull type horse mower

John Deere 3 bottom pull type plow, steel wheels

Corn Crib, 13’ diameter, 12’ high with roof (to be moved)

Approx 142” x 6” x 6” x 3/16” Steel Square Tube with 4 Bolt Pad

H-Beam, approx. 142” x 8 3/8” x 5 3/8”x ¼” steel with 4 bolt Pad

H-Beam, approx. 100” x 8 3/8” x 5 3/8”x ¼” steel with 4 bolt Pad

Approx 149” x 6” x 6” x 3/16” Steel Square Tube with 4 Bolt Pad and extra Piece on the L

Stack of used Corrugated steel, various sizes and colors, 16 sheets ranging from 90” to 200”, 36” wide

4 sheets of brown steel, 36” wide, x 188”, used

2 sheets of tan steel, 36” wide x 222”, new

Approx. 5 sheets of misc color steel, various lengths, 36” wide

Approx. 8 sheets of misc color steel, 9’ – 202” long, 36” wide

30” saw blade

Pair of Pull Type Plows

3 steel pieces, (2) 8” x 4” x 105”, (1) 8” x 4” x 100”

(7) John Deere Planter Boxes

Antique Hay Knife

TowMax 225/75R15 tire on rim

(6) Sodium lights in working order

Stainless Steel Smoker, 110V w/Thermostat, 2 burners (one currently not working)

3 piles of misc 2x6 and 2x4 lumber

5 piles of misc 2x6, 2x4, and 2x10 lumber

Fox silage chopper, 3 row narrow head and misc parts

Cobey Silage wagon, right side front unload, steel floor

7' snowblower, unknown brand, 3pt, 540 pto, 2 stage, hydraulic spout, single auger

Ford flail mower, 6'6'', 540 pto, 3 pt.

7' 3 point blade

5' 3 point yard drage

heavy duty axle with 8-bolt hubs.

(2) 30.5L-32 Firestone tires on 10 bolt rims, 14 ply off of John Deere 9570, approx. 50%

7’ snowblower, unknown brand, 3pt, 540 PTO, 2 stage, hydraulic spout, single auger

Ford flail mower, 6’6”, 540 pto, 3pt

7’ 3pt blade

5’ 3point yard drag

Heavy duty axle with 8 bolt hubs

Steel Conveyer, approx. 20’, needs work

(8) Kinze Bean Units off John Deere 7000 planter

Auction License: MN 76-12

Photo Gallery

Share This Listing

May Online Equipment Consignment Auction

Fragodt Auction and Real Estate LLC

Contact: Jacob Fragodt
Phone: 320-734-4408

94 Washington Ave
Milan, MN 56262

There is a 10% buyers premium in effect with a cap of $1,000 per item. ALL ITEMS MUST BE PICKED UP WITHIN 30 DAYS OR COULD BE SUBJECT TO STORAGE AND HANDLING FEES. AFTER 60 DAYS THE ITEMS WILL BE CONSIDERED ABANDONED AND BE RESOLD. By accepting the terms and conditions of this auction you acknowledge that you are entering into a legal and binding contract. Everything sells "AS IS" and "Where Is". Information obtained was furnished by sources deemed reliable; however, neither the owners not the auction company guarantees this information to be correct. All items are open to public inspection. It is the Bidder's responsibility to determine condition, age, genuineness, value, or any other factor. Fragodt Auction Company will not be responsible for any errors or omissions in the description of the item. All auctions are with reserve unless specifically stated otherwise and Fragodt Auction Compnay reserves the right to place a reserve bid on behalf of the seller. After an item is won on an auction, the buyer gives up all rights of inspecting that item before making payment. A 10% Buyers Premium with a maximum charge of $1,000.00 per items is in effect on this auction. Payment Options: Cash, Check, Credit Card, Wire Transfer *A 3% Surcharge will be added to all Credit Card Invoices and a $20 fee will apply to all wire transfers. **No items will be released until full payment has cleared our office. ***PAYMENT MUST BE RECEIVED BY THE FRIDAY AFTER AUCTION CLOSE!

Listing Details
Tractors: 1981 John Deere 4440, Quad Range, 11,450 hours, Heat/AC, 3 hydraulics, 540/1000 PTO, 3 point, 18.4R38 rears, with John Deere 265 loader, pallet forks, and 7’ bucket, SN: 043933R Oliver 880 2wd tractor with 345 Dual Loader, wide front, power steering, PTO live pump, live PTO, snow bucket, chains and bale spear, all rebuilt cylinders on loader, 15.5-38 rear tires, just added fluid to rear tires 1971 International Farmall 1066 Turbo, diesel, 18.4-38 rears, 540/1000 PTO, 3pt, rear HID lights, roll bar, hrs unknon, SN: 2610159U007511 1950 John Deere G, Older Restoration, new tires, Overhaled, Runs as it Should, SN: 43492 1928 John Deere D, on Steel, Engine is NOT stuck, Not Running, Needs a Mag, with Lugs and Rings, SN: 70214 Sprayers: 2011 Top Air TA 1200, 90’ boom, adjustable axles, single tires, SN: B29 950 108 WilRich 3pt mounted sprayer, 500 gallon, 60’ boom, has foam (not on sprayer, but goes with) Hardy TR500 41.5’ pull type sprayer, 3 piston pump, 3 section shut off with controller box, SN: 190317 Redball 670 Sprayer, 80’ booms with Hydraulic Fold, Raven 450 Monitor, working order, has not been used in a couple of years, SN: 04-02259 Hardi Navigator 1000, 60’ boom, 3 way nozzles (blue new last year), 13.6-38 good rubber, 1000 PTO, fresh water tank, adjustable axles, Hardi Monitor and boom control with joystick for fold out, SN: 10250 Ag Chem 180 gal saddle tanks w/brackets off JD 4640, Raven sprayer control, pump in unknown condition Planting/Seed Equipment: USC, LLC MX2500 Seed Treater and Control Box, Fully Automated with Fully Automated bin site control, (up to 4 bins), Treated Bypass, Software Version 1.3, Stainless Steel Drum, with 15,000lb hopper, everything is in working order Friesen Seed Titan Seed Tender, Honda 5.5 HP motor, SN: 23078 John Deere 1520 20’ Grain Press Drill, 3pt, SN: 665102 John Deere 7300 Maxi Merge Planter, 12 Row 22”, vacuum, Precision corn plates, lift assist, 250 John Deere monitor, always shedded, SN: 107500 John Deere Model 8300 Drill, 13’, 6” spacing with grass seeder, press wheel attachment, SN: 048444N Hiniker 4836 air seeder, 40, 15” spacing, Hiniker monitor, seed rebounders, 425/65R22.5 good rubber, in working order International 800 Cyclo planter, 12 row 30”, corn and bean drums, liquid fertilizer setup (unknown working condition), has Monitor, SN: 14965 John Deere 2 row wheel driven corn planter with markers (12) Seed tubes for John Deere planter with sensors (12) Total tubular for liquid fertilizer on John Deere planter Tillage Equipment: Sunflower 1435 Disk, 29.5’, good disks, 3 bar coil tine harrow, one owner, hyd leveling, tandems on wings, front gauge wheels, 12.5L-15FI rubber, SN: 1435108366 John Deere 980 Field Cultivator, 42.5’, walking tandems, 3 bar coil tine harrow, rear hitch, SN: 010967 International 4500 Field Cultivator, 30’, fold up wings, 3 bar harrow (all sweeps, tines on drags and bushings replaced 100 acres ago) 16/22 Cultivator, can be made into a 12/30, fold up wings, Brand unknown Phoenix H14 42’ Rotary Harrow John Deere 400 Rotary Hoe Kewanne Model 1100 disc, 21’, with fold up wings, 18” blades, 8.5” spacing, tandem axles, 2 bar Noble harrow Alloway Model 2135 3pt cultivator, 12/22, rolling shields Dakon 12/22 rear mount cultivator, rolling shields, Danish teeth Sunfower 7252-40 Rolling Basket Crumbler, 40’, SN: 20060008 IHC 183 Cultivator, 8 row 30” with rolling shields, good shape IHC 490, 20’ Disk with hydraulic wings, good shape International 183 Cultivator, 16 Row 30”, hydraulic flat fold wings, 3pt IH Model 710 Plow, 4-18’s, auto trip Trucks: 1990 Freightliner Semi Tractor, CAT 3406 engine, 10 speed transmission, 1.125 Million Miles, 11R22.5 rubber, dual fuel tanks, sleeper, VIN: 392412 GMC Top Kick feed truck, Twin Screw, 3208 CAT engine, 10 speed transmission, 20’ Box with 4 compartments, 11R22.5 Rears, 11R22.5 Fronts (radials) 1973 Chevrolet C65 Grain Truck, 14’ box and hoist, holds 300 bushels, twin cylinder hoist, 10:00x20 rubber, 5+2 trans, VIN: 162183 Snow Blower: Buhler/Allied 9620 dual stage 8’ snow blower, 540 PTO, hydraulic spout, SN: 96004903 Hay Equipment: 2014 New Holland 560 Round Baler, Approx 2150 bales, Specialty Crop, 1000 PTO, Net Wrap, Monitor Included, 21.5L-16.1 tires, SN: 182798 Accelerator for a 5000 Series John Deere silage cutter Sitrex 3pt 5 wheel rake, used very little, SN: 261219 Dryers/Grain Bin Equipment: AB 250 dryer, single phase, LP, has been gone through ready for 2020 Handlair Model 2100 Vaculator, 5” tubing, 1000 PTO, includes factory update on this model, (3) 10’ solid tubes, (1) 5’, (1) 2.5’, includes all hookups needed for 15’ flex, SN: 8410028 Vertical 8” to 10” bin unload, PTO drive One yar old Sukup 27’ bin flooring, no stands or flashing Unload auger with jump for 24’ bin, 6” auger, no motor Livestock Equipment: 9’ Loading Chute on wheels 15’ Cattle crossing grate for driveway, 5’ wide Misc pile of 16’ cattle and hog panels, approx. 10 140 gallon oval water tank (2) 16’ Northwest Brand hog gates True Test MP1010 Multi Purpose Chute, sheep or goats, no scale heat, 4400lb live capacity Cattle Chute with Headgate and squeeze 25 electric fence posts, step in 25 electric fence posts, step in 25 electric fence posts, step in 25 electric fence posts, step in 25 electric fence posts, step in Barrel of misc fiberglass electric fence posts Pallet of 25 count T-Posts Pallet of 25 count T-Posts Misc pile of assorted metal posts 2 speed reels with Turbo wire on them 2 cattle dehorners 300 Livestock Eartags Misc fence wire, some Hi-tensile (8) 8’ cement feed bunks (4) 8’ cement feed bunks (3) 8’ cement feed bunks, and (1) 4’ cement feed bunk Gehl 860 Silage Chopper with 2 row 3038 Chopping head, SN: 8685, Head SN: 13479 Gehl 800 Chopper to be sold for parts, the chopping head is still good, along with the knives, a bearing went out on the machine (10) 20’x6 bar continuous fence panels, with clips and connectors (10) 20’x6 bar continuous fence panels, with clips and connectors (10) 20’x6 bar continuous fence panels, with clips and connectors (10) 20’x6 bar continuous fence panels, with clips and connectors (4) 8’ wood fence posts (4) 8’ wood fence posts (4) 8’ wood fence posts (4) 8’ wood fence posts (4) 8’ wood fence posts (4) 8’ wood fence posts (3) Wood fence posts, (2) 15’, (1) 14’ (6) 17’ fence posts (5) 8’ Cement Feedbunks (5) 8’ Cement Feedbunks (5) 8’ Cement Feedbunks Misc Electric wire and fence posts Feed bunk cable Round bale feeder MC Model 9D 9’ Flail Chopper, pull type, 540 PTO, with Rollers, SN: 23468 4’ x 17’ cattle gate Cement Feedbunks, approx. 18, various sizes on conditions, some need work (90) 2nd cutting Alfalfa/Grass mixture bales, baled with New Holland 7090 baler and new wrapped. Approx 1,700lbs Lawn and Garden/Recreation: John Deere 425 All Wheel Steer 60” Lawn Mower, 2,088 hours, Power Steering, hydraulic deck lift, hydro drive, liquid cooled 20 hp John Deere Series K engine, electric PTO, SN: 023677 2009 John Deere X724 Lawn mower W/ John Deere 647 48'' rotary tiller, 62'' deck, 4 front weights, 4 wheel steer, 351 hours, cruise control, 25 horsepower engine, Mower SN: A040644, Tiller SN: B031326 2009 John Deere X724 Lawn Mower, 62” deck w/John Deere 647 48” rotary tiller, 4 front weights, All Wheel Steer, 351 hours, cruise control, 25hp engine, Mower SN: A040644, Tiller SN: B031326 Woods 1850 zero turn lawn mower, 50” deck, 3 blade, chain drive, engine was replaced with 20hp Briggs V-Twin, good tires, runs, hours unknown Woods RD8400 3pt finishing mower, 6’, 540 PTO, SN: 7294119 Woods Model M5 Dixie Cutter Chopping Mower, 3pt, 5’, 540 PTO, SN: 105061 Craftsman Hi Performance Lawn Sweeper, approx. 42”, self dumping 2007 ADLY Her Chee 150cc moped, 4,570 miles, kick start and electric start with a new battery, 4 stroke motor, disk brakes, comes with helmet and saddle bags, good runner, VIN: 000100 1989 Suntracker 24’ Partybarge w/Mariner 90 hp 2 stroke motor, (had $3,000 of work done to motor in 2019) on 4 wheel Shore Launcher pontoon trailer with lifetime license, new floor in approx. 2015, comes with 2 fuel tanks, canopy (has tear on seam), misc chairs and life jackets, ladder, Minnkota Endura trolling motor with 40lb thrust (12volt SN: 4139104), has storage and 2 spare tires (on wrong rim, but right size of tire 5.30-12), SN: 30093G889 Kawasaki KZ550 motorcycle, VIN: 001532, unknown running/working condition, has been parked inside for years Norton 750 Motorcycle, VIN: 136775, unknown running/working condition, has been parked inside for years Misc Equipment: Houle PTO Manure Pump, 540 PTO, in working order, SN: 1401-051745-R28 7’ x 13’ Rock Trailer with Hoist, good boards, hoist works, rubber is up, Lo-Boy running gear Oliver 3 bottom on land plow Crary Hydra Stinger 3pt Forklift/Bale Mover, 2 remotes, 1 remote for tilt, 1 remote for lift, 12’ Max height Allied 795 Loader w/mounting bracket and 8’ bucket, no welds, nice shape Fasse Valve Koyker K5 loader, needs some fixing, quick tach, Euro style quick tach for bucket, no bucket, John Deere mounts off 4430 17’ Jumbo Leveler off of a John Deere chisel plow Open Top Tunnel Shields, enough for 12 row cultivator FMC 3 Phase 5800 Computer Wheel Balancer with Cederberg Single to 3 Phase Converter, works good Hoffman 1610 Air Tire Machine, working order, Air Blast, 110 volt, Forward and Reverse 27’ Mayrath auger w/5hp electric motor Drill fill auger 2019 Loftness RC800 fertilizer spreader, 90 spread, hydraulic drive, variable rate ready, scale, roll tarp, extensions, Raven ISO controller M+W Little Red Wagon, approx. 400 bushel, brakes, 16.5L-16.1 rubber, two hoppers, rear hitch Skidloaders/Equipment and Construction: 2014 Bobcat S510 skid loader, 5,780 hours, 2.4L Bobcat engine, 46 hp, ROPS cab only, no door, no air/heat, SN: 11375 2011 Bobcat S650 skidloader, 2,150 hours, Kubota Interim Tier 4 engine, 74 hp, 2,690lb lift capacity, heat and AC, 2 speed, radio, Power Bobtach, Deluxe cab package, new paint, tires, and bucket (on the way), reman hydro, SN: A3NV14739 2003 Bobcat S250 skid loader, 5,205 hours, Kubota V3300 engine, 2 Speed, Cab w/Heat, LED Lights, SN: 13216 1990 Bobcat 843B, 5,500 hours, Isuzu motor, 1,700lb lift capacity, ROPS cab, new tires, paint and reman hydro, rebuild chain case, SN: 32752 1981 Bobcat 843 skidloader, 4,200 hours, Perkins engine, 1,700lb lift capacity, ROPS cab, new front reman hydro drive and rebuilt chain case, SN: 5020-M-11021 1999 New Holland LX865 Skidloader, 6868 hours (might go up), foot controls, 3^rd hydraulic, 7’ material bucket, manual tach, 31 x 15.5 rubber, SN: 102085 1987 John Deere 770B Motor Grader, blade and snow wing, 14:00-24 rubber, 11,706 hours, SN: 514901 2000 Genie GS-2032, 26’ working height, 32” wide, new batteries, been serviced and is ready to go, hour meter has been replaced CAT 7’ Skidloader Bucket, step, bolt on cutting edge Tracks off a John Deere 323E Skidloader 3 Post hole auger bits Hawz Attachments 84” brush mower (quick tach is bent) Hawz Attachments 66” rock bucket (bucket is bent) Hawz Attachments tree/post puller Hawz Attachments 74” rock bucket Hawz Attachments 79” rock bucket (quick tach is bent) Hawz Attachments 68” fork extensions Hawz Attachments 68” fork extensions Hawz Attachments solid quick tach plate Hawz Attachments quick tach plate Hawz Attachments quick tach plate Hawz Attachments receiver plate Hawz Attachments receiver palte Trailers: 1972 Wilson Flatbed Water trailer, 42’, 11R24.5 rubber, (4) 1500 gallon water tanks, Honda GX160 gas motor and pump, also includes inductor and reel with hose, VIN: 75004 Cable spool cart, could be converted to tile cart Campers: 2005 Fleetwood Excursion RV made by Winnebago, 63,959 miles, New Tires, New Batteries, Completely Loaded, everything is in working order, 350 CAT engine, Allison Automatic Transmission, Freightliner chassis, excellent condition 1992 NUWA 5^th wheel camper, 35’, 2 slides outs, queen bed and sleeper sofa, Champagne Edition, Air Hitch Hiker Model, VIN: 046143 Vehicles: 2014 Ford Explorer Police Interceptor AWD, V-6 Flex Fuel, 18” tires with good ruber, Keypad entry, full size spare, 134,954 miles, CD/AM/FM, Aux/USB, steering wheel controls, PW, PL, VIN: 79835 2004 GMC Envoy, No Keys, (running when impounded) in Neutral now, 17” tires, PW, PL, CD, dual climate control, 2” receiver hitch 1996 Ford F-250 2wd, regular cab, 137,000 miles, automatic trans, 5.0 V-8, gas, manual windows and locks, 16” tires, city owned 2005 Chevrolet Trailblazer Ext, Blown Motor, 4x4, good rubber, (65R/17), cloth seats, 3^rd row, 119,000, rear hitch 2000 Chevrolet 2500 4x4 extended cab pickup, approx. 2,000 miles on new crate engine, new tires and all new front brakes, transmission is out, needs a new transmission, have receipts for engine work 1999 Volkswagen Jetta 4 door, 2.0 L 4 cylinder engine, auto transmission, 180,000 miles, new brakes, rotors, struts, water pump and timing chain 2006 Chevrolet Trailblazer 4x4, 4 door, 190,000 miles, 6cyl engine, auto transmission, new battery, brakes, wheel bearings, water pump, and fan clutch, complete tune up 1953 (approx.) International R120 pickup, no title, it does have engine and transmission but running and working condition are unknown 2002 Ford E-450 dually, 11’ x 8’ flatbed, 7.3 diesel, 2 tool boxes, wired for a winch, 153,000 miles, automatic trans, hitch, towing mirrors, mud flaps, diamond plate running boards, VIN: 23166 Chevrolet 3500 dually, 4x4, gas, auto transmission, shows 126,000 miles, extended cab, 5^th wheel call, front bucket seats, VIN: 204199 1994 Ford F250 XL single cab, 4x4 with 8’ snowplow, hydraulic tilt, lights, 5 speed trans with overdrive, V8 engine, shows 88,081 miles 1998 Chevrolet Blazer, engine is bad, drive train is good, clean title 1969 Lincoln Continental, no title, complete engine and transmission (not running) 1954 Chevrolet Station Wagon, runs and drives, 6-cylinder, 3 speed on the column 1937 Pontiac 4 door, does not run, no title 1996 Ford F-250 2wd, regular cab, 137K miles, automatic, 5.0, gas, manual windows and locks, 16'' tires 2005 Chevrolet Trailblazer ext. Blown Motor, 4wd, good rubber (65/R17), cloth seats, 3rd row, 119k miles, rear hitch. Misc: (2) Goodyear 320/85R34 tractor fronts on 10 bolt rims (4) Goodyear 320/90R50 tractor tires, on rims, set up as duals, good rubber left Westfield Drill fill auger, hyd drive, brush auger Misc 3” Banjo fittings and valves, buying all one money Galvanized stock tank Haukass sidearm markers Tailgate lift, no brand or other information on unit 3pt Hiniker head mover Hydraulic power plant with 25hp 3 phase 480 or 2 phase 220, 1750 RPM electric motor, has hydraulic reservoir tank 12 insecticide boxes for John Deere 7000 planter with meters Honda 20 Horsepower V-Twin motor, came off portable Auger, Throttle cable has 2 new cables Roof wind deflector off 1994 Freightliner 60 series, no damage (12) Suitcase weights (blue) (5) Chemical Totes (5) Chemical Totes (5) Chemical Totes (5) Chemical Totes Bedslide retractable truck bed cargo tray, 5’ long, 47” wide, 7” tall Chevrolet Silverado Grill, Fits 2008-2012 Roll of electrical wire Dewalt Electric Vacuum Spray Systems Sprayer Control Old Safe Smith Torch Head, Lifetime warranty Case Vintage Wide Front 2-cylinder Wisconsin motor (stuck) 3 wheel weights, believed to be off Massey Ferguson Allis Chalmers 3 bottom plow, slat bottoms Wisconsin 4 cylinder engine, VH4D, engine is loose 2 wheel weights for International tractor 2 spring tooth drag sections Stan Wagon Hoist for raising flair boxes Pair of fenders off Allis Chalmers Minneapolis Moline 4 bottom pull type plow 2 antique steel wheels Pair of spoked tractor rims for rear Pair flair box wagon hoists Chevrolet truck, Early 50’s, does not run, no title, solid body 2 bottom pull type plow International 2 bottom pull type plow, slat bottoms International #9 pull type horse mower John Deere 3 bottom pull type plow, steel wheels Corn Crib, 13’ diameter, 12’ high with roof (to be moved) Corn Crib, 13’ diameter, 12’ high with roof (to be moved) Approx 142” x 6” x 6” x 3/16” Steel Square Tube with 4 Bolt Pad Approx 142” x 6” x 6” x 3/16” Steel Square Tube with 4 Bolt Pad Approx 142” x 6” x 6” x 3/16” Steel Square Tube with 4 Bolt Pad Approx 142” x 6” x 6” x 3/16” Steel Square Tube with 4 Bolt Pad Approx 142” x 6” x 6” x 3/16” Steel Square Tube with 4 Bolt Pad H-Beam, approx. 142” x 8 3/8” x 5 3/8”x ¼” steel with 4 bolt Pad H-Beam, approx. 100” x 8 3/8” x 5 3/8”x ¼” steel with 4 bolt Pad Approx 149” x 6” x 6” x 3/16” Steel Square Tube with 4 Bolt Pad and extra Piece on the L Stack of used Corrugated steel, various sizes and colors, 16 sheets ranging from 90” to 200”, 36” wide 4 sheets of brown steel, 36” wide, x 188”, used 2 sheets of tan steel, 36” wide x 222”, new Approx. 5 sheets of misc color steel, various lengths, 36” wide Approx. 8 sheets of misc color steel, 9’ – 202” long, 36” wide 30” saw blade Pair of Pull Type Plows 3 steel pieces, (2) 8” x 4” x 105”, (1) 8” x 4” x 100” (7) John Deere Planter Boxes Antique Hay Knife TowMax 225/75R15 tire on rim (6) Sodium lights in working order Stainless Steel Smoker, 110V w/Thermostat, 2 burners (one currently not working) 3 piles of misc 2x6 and 2x4 lumber 5 piles of misc 2x6, 2x4, and 2x10 lumber Fox silage chopper, 3 row narrow head and misc parts Cobey Silage wagon, right side front unload, steel floor 7' snowblower, unknown brand, 3pt, 540 pto, 2 stage, hydraulic spout, single auger Ford flail mower, 6'6'', 540 pto, 3 pt. 7' 3 point blade 5' 3 point yard drage heavy duty axle with 8-bolt hubs. (2) 30.5L-32 Firestone tires on 10 bolt rims, 14 ply off of John Deere 9570, approx. 50% 7’ snowblower, unknown brand, 3pt, 540 PTO, 2 stage, hydraulic spout, single auger Ford flail mower, 6’6”, 540 pto, 3pt 7’ 3pt blade 5’ 3point yard drag Heavy duty axle with 8 bolt hubs Steel Conveyer, approx. 20’, needs work (8) Kinze Bean Units off John Deere 7000 planter

Close X

Gallery Images Loading, Please Wait...

Close X

Save this sale to your Saved Sales list!

Your Saved Sales list is an easy way to return to sale listings which are of interest to you.

Login

Username:

Password:

Sign Up

FREE EMAIL NOTIFICATIONS
estate sale listings delivered to your inbox

Close X

Sign Up

FREE EMAIL NOTIFICATIONS
estate sale listings delivered to your inbox

Login

Username:

Password:

Close X

Return

May Online Equipment Consignment Auction

Online Only Auction

VIEW ONLINE CATALOG

View Gallery (35)

Sale Date(s)

Bidding Starts: Thursday May 7 , 10:00 AM
Bidding Ends: Monday May 18 , 6:00 PM

Sale Location

Milan, MN 56262

View Map

Company

Fragodt Auction and Real Estate LLC

Contact: Jacob Fragodt
Phone: 320-734-4408
Email: Info@FragodtAuctions.com
Website: https://fragodtauctions.hibid.com/auctions/