THIS IS A COMPLETED SALE
View current listings by this company
View current listings by this company
Ham & Antique Radios, Spring 2019
Listing ID#: 236222
Sale Location |
---|
Kansas City, MO 64116 |
Sale Dates and Times |
---|
Bidding Starts: Thursday Apr 18 Bidding Ends: Thursday May 2 |
Sale Type |
---|
Online Auction VIEW ONLINE CATALOG |
Company Information |
---|
Schulman Auction & Realty, LLC Contact: David Schulman Phone: 816-455-5520 Email: sold@schulmanauction.com Website: www.schulmanauction.com EstateSale.com ID#: 7614 View company information and listings |
Free Email Notifications
Sign up for the EstateSale.com email notifications and we will let you know about sales in your area! You may set up alerts by area (zip and radius), keywords, and by company. It is FREE and only takes a few seconds to sign up.
Listing Terms and Conditions |
---|
TERMS AND CONDITIONS
ONLINE ONLY AUCTION! These are the Terms and Conditions of Sale for this online auction. They consist of this introduction and 27 (twenty-seven) numbered paragraphs and subparagraphs that outline the relationship between you ("the Bidder") and Schulman Auction & Realty, LLC, ("the Auctioneer"). Throughout these Terms and Conditions, the terms "auctioneer," "we," "us," and "our" will refer to the Auctioneer, and the terms "you" and "your" will refer to the Bidder. If you want to bid in this online auction, you will first have to read these Terms and Conditions. And by placing a bid, you agree that you have read the Terms and Conditions and understand the terms are binding on both you and on the Auctioneer, and all parties will be expected to abide by the Terms and Conditions if any issues arise in connection with this sale. Please read these Terms and Conditions carefully! They contain important information about the online auction itself and your rights and responsibilities as a bidder. 1. Registration: To gain access to this online auction, you will need to register and obtain a bidder number. You must be eighteen years old or older to register. You agree that all information that you provide during the registration process will be true and accurate. You will be banned from participation in the Auctioneer's auctions indefinitely should you provide any false information during the registration process. 2. Credit Card: In order to register for this auction, you will need a working Visa, MasterCard, Discover, or American Express card associated with your account. This card will be automatically charged at the end of the auction, if you are a winning bidder. NOTE: If this is your first time registering for one of our auctions with a credit card, your card may be temporarily charged a small fee of $1 or less for authentication purposes. This charge WILL be REMOVED after your card is successfully authenticated. None of your credit card information is stored with the auctioneer. 3. Bidder's Duty to Update Information: Whether you are a new or returning bidder, you agree that if any of the information associated with your bidder number - including contact information and credit card information - changes at any time prior to, during, or after this sale, you will notify the Auctioneer of the change by updating your bidder profile. 4. Conduct of Sale: All bids, and credits in this sale will be made in United States Dollars (USD). You agree not to use any hardware, software, program, or system that would interfere with the orderly conduct of this sale. You further agree not to copy, reproduce, or publically display any content from the Auctioneer's website without first obtaining written permission from the Auctioneer. 5. Bidder's Duty to Inspect and Investigate: You acknowledge that the Auctioneer is providing you with the opportunity to inspect the items being offered for sale in this auction. The Auctioneer strongly encourages you to attend the scheduled inspection for this auction. If you choose not to attend the scheduled inspection and are in doubt about the condition, completeness or suitability of a given item, please bid accordingly. a. Photographs and Descriptions: The Auctioneer regularly posts item descriptions and photographs to aid bidders in the bidding process, and we make every effort to ensure that the descriptions and photographs that we post accurately represent the items being offered for sale. In some photographs, multiple items may appear to be joined as a single unit, however you should not assume that a lot consists of more than one item simply because various items appear connected or are featured in the same photograph. Also understand that, on occasion, the wrong photograph may be displayed for a given item. At all times, you are bidding on items as they are described on this website, not as they appear in any photograph. b. Bid Wisely: We want everyone to be pleased with their purchases and most will. However, when you bid on the wrong item or decide an item is not suited for your intended use, our clients will not assume the cost of your mistakes. You agree that your failure to inspect or otherwise become fully informed about the items offered for sale in this auction will not be grounds for a refusal to pay amounts due to the Auctioneer nor for any claim against the Auctioneer. 6. WARRANTY AND CONDITION OF ITEMS SOLD: ALL LOTS AND ITEMS ARE SOLD AS IS, WHERE IS, WITH ALL FAULTS, AND WITH NO EXPRESS OR IMPLIED WARRANTIES. NO ACTION TAKEN BY THE AUCTIONEER OR ITS AGENTS IS INTENDED TO CREATE ANY EXPRESS OR IMPLIED WARRANY AS TO ANY LOT OR ITEM IN THIS SALE. THE AUCTIONEER SPECIFICALLY DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR USE, CONFORMITY WITH ENVIRONMENTAL LAWS OR REQUIREMENTS, NON-INFRINGEMENT, ACCURACY, TITLE, OR ANY OTHER WARRANTY. IT IS BELIEVED THAT ALL DESCRIPTIONS ARE ACCURATE. DESCRIPTIONS ARE NOT GUARAUNTEED. 7. When You Have Been Outbid: If you are outbid during the course of this auction, you will be notified by email, if you have chosen this option when you registered. You can see if you are high bidder at any time using the "Watch List" feature; items which you have put on the Watch List will show the bidder name of the high bidder. 8. Reporting Bidding Errors: You should carefully review every bid you choose to make before submitting that bid. The Auctioneer will not automatically assume that any bid, even a bid that increases your own lower bid, was made in error. If you mistakenly increase your own bid at any time during the auction, or make some other bidding error (e.g. placing your bidder number in the price field), you must immediately contact the Auctioneer by email at david@dschulmanassociates.com. Reports of bidding errors must be made via e-mail; phone reports will not be accommodated. 9. Timeliness of Bidding Error Reports: If you make a bidding error during this auction, you must identify and report the error before the auction begins to close. The Auctioneer will not undo bidding errors reported after the auction has begun to close. 10. Bidder's Duty to Report Fraud: You are responsible for all bids made from your account. If you believe that an unauthorized person has gained access to your account, you must notify the Auctioneer immediately by sending an e-mail to david@dschulmanassociates.com. You must also report the incident to the relevant law enforcement authorities and send the Auctioneer a copy of any resulting police report. You understand and agree that if you do not promptly report any suspected fraud to the Auctioneer and to the relevant law enforcement authorities, you will be held personally responsible for all purchases made using your account and bidder number. 11. Changes in Circumstance: All aspects of this auction are subject to change without notice. The Auctioneer reserves the right to, at any time: (1) add or remove items from the auction, (2) split or combine lots, (3) add minimum bids or reserve prices, (4) cancel, suspend, extend or reschedule the sale of an individual item, lot, auction, and/or auction event, (5) make changes to the auction's closing, inspection, or removal times, or (6) take any other action the Auctioneer deems necessary to effect the fair conduct of this sale or protection of buyers', sellers', or other parties' interests. In the event a seller withdraws an item from this auction prior to the close of the auction, the Auctioneer may leave the item on the catalog and buy the item back on behalf of the seller to establish the Auctioneer's earned commission and the buyer's premium due to the Auctioneer from the seller. 12. Closing: the Auctioneer's online auctions are designed to mimic traditional "live" actions. For this reason, this auction will have a staggered, dynamic closing. a. Staggered Closing: This online auction will automatically begin to close at a rate of 3 items per minute. Items' closing times may be extended past their scheduled closing time, however, as a result of the Auctioneer's dynamic closing feature. b. Dynamic Closing: The closing time of an item is automatically extended an additional 3 minutes whenever a bid is placed within the 3 minutes leading up to an item's scheduled closing time. 13. Winning Bids: If you place a bid in this sale, and your bid is determined to be the winning bid, you become obligated to pay for the item(s) that you have won at the price you gave as your bid. a. Notification: If you end up placing one or more winning bids in this auction, the Auctioneer will contact you by e-mail to let you know which items you have won. This e-mail notification will be the only contact you receive from the Auctioneer about your winning bids; this means that you are responsible for checking your e-mail following the close of the auction to determine what items you have won. If you do not receive an e-mail identifying you as a winning bidder, it is because the Auctioneer has no record of your having placed a winning bid. b. Bid Inquiries: If you believe that you placed a winning bid, but do not receive an e-mail, you must notify the Auctioneer by sending an e-mail to david@dschulmanassociates.com explaining your situation by 9:00am on the day after of the auction has closed. You agree that the Auctioneer will be the sole authority regarding the identification of winning bids. 14. Payment: At the conclusion of this auction the credit card you used to register for this auction, will automatically be charged for your invoice amount. a. Chargebacks Prohibited: You agree that you will accept all charges placed on the credit card associated with your account, and you agree that you will not charge back any amount that is charged s to your credit card. You agree that this provision applies equally to amounts charged in connection with any items you have won and any costs or fees discussed in Paragraphs 16-18 of these Terms and Conditions. 15. Buyer's Premium: A 10% buyer's premium is added to every purchase. This means that if your winning bids add up to $100, you will be charged $110 at checkout, plus any applicable sales tax. 16. Default and Resale: You agree that if, after being declared the winning bidder, you fail to pay for any item that you have won for any reason, your account will be declared in default. If you still refuse to pay for any item after being notified of your account's being in default, you agree that the Auctioneer will have the right to immediately resell your item, and you further agree to pay (1) any cost associated with the resale and (2) any deficiency between your original purchase price and the resale price. 17. Picking Up/Shipping Your Items: IF you are picking up your items, you are solely responsible for the safe and timely pick-up and removal of any items you may win at this auction. IF you are having your items SHIPPED due to being located out of the area, see section "a" below. If you are unable to safely pick up and remove your items during the item pick up times that have been scheduled for this sale, PLEASE DO NOT BID. The Auctioneer does not hold items beyond the published removal times. The Auctioneer will not issue you a refund if you are unable to pick up and safely remove your items during the published removal times. a. SHIPPING: If shipping out of the area is required, we work with a local UPS franchise that will pickup your items the week following the auction. Shipping charges will be billed to you separately, by the shipper. Your name and phone number, along with a copy of your paid invoice and items won, will be given to the shipping company so that they may contact you to arrange shipping and payment. b. Bidder's Duty to Remove Items Safely: Again, you are solely responsible for the safe pick-up, removal, and transportation of your items. You agree that the pick-up, removal, and transportation of your items will be solely at your expense and at your risk. You further agree that you will be responsible for any damage that you or any of your agents cause during any inspection or removal period, and also agree that the credit card associated with your online account will be charged for any expenses incurred and/or repairs necessary as a result of any damage that you cause. c. Release Upon Presentation of Receipt: You understand and agree that the Auctioneer will release your items only after you or your agent presents a sales receipt generated by the Auctioneer stating that your account is paid in full. You further understand and agree that it is your duty to ensure that any agent picking up items on your behalf has a copy of your paid sales receipt to present at the pick-up location. You explicitly authorize the Auctioneer to release your items to any person in possession of your paid sales receipt. No item will be released to any person unless that person presents a paid sales receipt listing the item in question. d. Abandonment: You understand and agree that any item that you do not pick up during the published removal times will be considered abandoned. You understand and agree that you will be charged a reasonable fee for the storage, removal, and/or disposal of any item that is considered abandoned. 18. Disposal of Unclaimed Items: In the event you refuse to pay for or abandon any item that you win at auction, the Auctioneer will have the option of reselling, removing, storing, or disposing of the unpaid or abandoned item. You understand and agree that you will be personally responsible for all deficiencies including all legal, collection, transportation, and storage expenses associated with your delinquent account and/or abandoned items. In the event of resale, you agree to pay any cost associated with the resale as well as any deficiency between your original purchase price and the resale price. 19. Non-Delivery: In the unusual event that an item has been grossly misrepresented or is unavailable for pickup during the published removal times, you must immediately notify the Auctioneer's onsite staff of the problem and file a claim for non-delivery within twenty-four hours. You understand and agree that if you fail to make a claim for non-delivery within twenty-four hours of your discovering the problem, your claim for non-delivery will not be honored. Claims for non-delivery may be filed by replying to the e-mail that informed you of your winning binds. Your claim must fully describe the nature of the problem that you have identified. 20. Claims and Choice of Venue: Any claim or controversy out of or relating to these Terms and Conditions, or to any breach thereof, will be settled either (1) in Clay County, Missouri's Small Claims Court, if the claim in question amounts to less than $5,000, or (2) by means of arbitration in accordance with the Commercial Arbitration Rules of the American Arbitration Association, if the claim in question amounts to more than $5,000. In the event of arbitration, judgments upon the award rendered by the arbitrator may be entered by any court having jurisdiction. You agree that all claims will be litigated or arbitrated on an individual basis, and will not be consolidated with any claim made by another party. Venue in every case will be Clay County, Missouri. You agree that any judgments awarded may be applied to and collected from you personally or corporately. Should any party file an action contrary to this paragraph, the counterparty may recover reasonable legal fees and costs. Further, if you bring a claim against the Auctioneer and do not prevail, you agree that you will reimburse the Auctioneer for all reasonable legal fees and costs. 21. Interim or Preliminary Relief: Notwithstanding the contents of Paragraph 22 of these Terms and Conditions, you agree that the Auctioneer may seek interim or preliminary relief in a court having jurisdiction in order to protect any rights or property that the Auctioneer may have pending arbitration or litigation. 22. Liability: In all cases, the Auctioneer's liability, and the liability of the seller of the items in this auction, will be limited to the refund of your purchase price. The Auctioneer will not be liable for any amount in connection with the postponement or cancellation of this auction, or the withdrawal of any item or lot from this auction. In no event will the Auctioneer be liable for lost profits or any special, incidental, or consequential damages arising out of or in connection with this auction or any related sale or transaction. a. No Liability for the Acts of Third Parties: The Auctioneer is not responsible for any action taken by any seller, bidder, or other third party before, during, or after this auction. b. No Liability for Site Malfunction: You understand that this auction is online-only, and so relies on devices and programs that may malfunction without warning. You agree that the Auctioneer will not be liable for any error or inconvenience that may be the result of such a malfunction. You further understand and agree that the Auctioneer may void or suspend any sale, or resell any item, if the Auctioneer determines a transaction to have been affected by any site malfunction. 23. Indemnification: You agree to indemnify, defend, and hold harmless the Auctioneer and its employees, officers, owners, affiliates, agents, and representatives from and against any claims, losses, damages, liabilities, judgments, fees, costs, and expenses, including reasonable legal fees and costs, related to, arising from, or associated with you, your agents or representatives including, but not limited to, personal injury or property damage caused at any sales site or during removal or transportation of items won at auction, any dispute with another bidder, or any violation of these Terms and Conditions. 24. Limitations: These Terms and Conditions do not, nor are they intended to create any agency, partnership, joint venture, employer-employee, or franchisor-franchisee relationship. These Terms and Conditions cannot be altered except in writing by the Auctioneer. 25. Severability: If any term, provision, paragraph, condition, or other portion of this agreement, or the application of these, to any person, place, or circumstance, is held to be invalid, unenforceable, or void, the remainder of this agreement and such term, provision, covenant or condition as applied to other persons, places and circumstances will remain in full force and effect. 26. Governing Law: These Terms and Conditions will be governed by and construed under the laws of the State of Missouri. 27. Entire Agreement: These Terms and Conditions contain our entire agreement and supersede any prior oral or written agreements relating to the same subject matter. |
Listing Information |
---|
This auction will include a wide array of ham radio gear, some vintage and some newer, accessories, antennas and more. Also included will be a nice selection of antique radios dating from the 1920's through the 1960's.
Some featured items are an exceptional E.F. Johnson Viking 500 transmitter and a Johnson Viking Valiant transmitter, two Collins KWS-1's with power supplies, Collins S-Line radios, Collins R-390A receiver with case, amplifiers by National, Swan and Ameritron, a Kenwood TS-570D, TS-590SG and TS-940SAT, Yaesu FT-767GX, ICOM IC-775DSP and many more.
Also included is an extensive microphone and Morse key collection with keys from Begali, Kent, Vibroplex, Autronic, Bencher and more. Early antique radios and speakers from Atwater Kent, RCA, Brunswick, American Bosch, and others.
Over 280 LOTS in all! There is something for everyone.
As always, thank you for looking, and for your business.
David Schulman 1 PAYMENT! At the conclusion of this auction, the credit card you used to register with will automatically be charged for your purchases. A PAID invoice will be emailed to you. Please be sure that the card you used to register has sufficient funds/credit limit... 2 BIDDING INFORMATION! Bidding is pretty simple, particularly if you've bid in an online auction before, but here's a quick rundown on some features that may be unfamiliar: Each lot in the auction is scheduled to close approximately 20 seconds apart. For example, Lot 1 i... 3 SHIPPING! If you require shipping, please cut and paste the following link into your browser for specific details you need to know about our shipping process: https://www.schulmanauction.com/vintage-electronics/auction-shipping/ 4 PREVIEW / PICKUP LOCATION! Previews and pickups will be located at: Cherry Street Shoppes 4019 N. Cherry St. Kansas City, MO 64116 Preview Date: Saturday, 4/27 from Noon-3PM CDT, by Appointment Only. Local Pickup Date: Saturday, 5/4 from Noon - 3PM CDT. 5 EQUIPMENT TESTING! When possible, we do our best to test the equipment we sell so that you will know exactly what you are bidding on. That being said, we perform basic tests such as overall power consumption, receiver sensitivity, transmitter power output, etc. Depen... 6 Johnson Viking 500 Transmitter and Power Supply Johnson Viking 500 Transmitter and Power Supply. This is the second one of these beautiful and scarce rigs we've sold, and it will not disappoint. Cosmetically, it's in very good condition, both inside and out, as shown. There are a few scratches a... 7 Johnson Viking Valiant Transmitter w/ Mic Johnson Viking Valiant Transmitter. A great, classic transmitter in good overall working as well as cosmetic condition. There are some scuffs and scratches to the cabinet, but still a fine looking rig! Power output was approximately 80W CW carrier o... 8 Collins 30L-1 Linear Amplifier, 220V, RE Collins 30L-1 Linear Amplifier, RE. This amplifier does exhibit a few scuffs and scratches as shown in the photos. There is also a small nick to the front panel by the power switch, as shown. This amp is wired for 220V and with 60W of drive, it prod... 9 Collins 516F-2 Power Supply, WE Collins 516F-2 Power Supply, WE. This supply is in good working as well as cosmetic condition, as shown. s/n 823 Approx. Weight: 31 lbs. Approx. Dims: 12x10x8 10 Collins 312B-4 Station Control, RE Collins 312B-4 Station Control, RE. In good working as well as cosmetic condition, as shown. Original manual included. s/n 63389 Approx. Weight: 8 lbs. Approx. Dims: 12x10x7 11 Collins 32S-1 Transmitter, WE Collins 32S-1 Transmitter, WE. This transmitter is in good cosmetic condition, with scratches and scuffs to the cabinet, as shown. As you can see from the interior photos, there are quite few solid state tube replacements. There is also documentatio... 12 Collins 75S-1 Receiver, WE Collins 75S-1 Receiver, WE. As you can see from the photos, there are some cosmetic issues with the case of this rig, and there are extensive modifications to the front panel. The RF gain knob was replaced with a band switch knob for and extra set ... 13 Collins KWS-1 Transmitter and Power Supply, 120V Collins KWS-1 Transmitter and Power Supply. This transmitter and power supply does have some cosmetic issues and the key lock on the power supply front panel is missing, as shown. This early model, s/n 129, powers up and all voltages are present, HV... 14 Collins KWS-1 Transmitter and Power Supply, 220V Collins KWS-1 Transmitter and Power Supply. Nice looking set, as shown in the photos. The power supply is wired for 220V. We initially tested this transmitter and was able to get about 400W CW carrier output from it, however, upon further testing at... 15 Collins 75A-3 Receiver, by Howard Mills, W3HM Collins 75A-3 Receiver, by Howard Mills, W3HM. Very nice looking and sounding receiver. The cabinet is black wrinkle finish as well as the front panel, with crisp, silk screened lettering. This rig exhibits excellent sensitivity and frequency calib... 16 Collins 75A-3 Receiver Collins 75A-3 Receiver. Here's another A3, but this one will need a bit of work as far as the cosmetics go. Cabinet is faded and does exhibit some scratches and scuffs as well as a bit of corrosion in a few areas. There is a chip in the tuning dial s... 17 Collins 75A-4 Receiver Collins 75A-4 Receiver. Everything except the top hinged cover is in good to very good condition. There are a couple of paint chips on the top right edge of the front panel, otherwise all lettering looks great. This radio does have 4:1 reduction tuni... 18 Collins 75A-4 Receiver Collins 75A-4 Receiver. This receiver is in working condition, however, the case and knobs/switches have faded as this set was evidently exposed to sunlight over a long period of time. There were also rack mount angle brackets fitted to the sides of ... 19 Collins 32V-2 Transmitter Collins 32V-2 Transmitter. This transmitter will need some work. There is some corrosion evident to the case, however, the interior looks good, as shown. All dials an knobs function mechanically, as intended. We were unable to test the set due toa br... 20 Collins 32RA-7 Transmitter Collins 32RA-7 Transmitter. Here's one you definitely don't see every day. It's been restored cosmetically, and looks new, as shown in the photos. The interior is quite impressive as well. The only testing that was done on this Radiotelephone/Radiot... 21 Collins R-390A/URR Receiver Collins R-390A/URR Receiver. Absolutely beautiful cabinet included with this radio. This rig receives on the bottom 8 bands, but anything above that is no RX. The S-meter and BFO are non-working. All other functions work as intended. Approximate po... 22 Collins Model 2 Type 35C Low Pass Filter Collins Model 2 Type 35C Low Pass Filter. In good working condition. Type N connectors. Approx. Weight: 5 lbs. Approx. Dims: 11" length, 3" dia. 23 Rockwell Collins SM-280 Desk Microphone Rockwell Collins SM-280 Desk Microphone. This mic is in good working condition. Cosmetically, I'd give it a good to very good; there are a few minor scuffs/scratches to the paint, as shown. 3/16" mic connector for Collins gear. Very nice addition to... 24 Collins/Electro Voice EV-620 Desk Microphone Collins/Electro Voice EV-620 Desk Microphone. This mic is in good working condition. Cosmetically, there are some paint flakes throughout, as shown. With 3/16" phono connector. Approx. Weight: 2 lbs. 25 Rockwell Collins Pro-Mark Dealer Advertising Signs Rockwell Collins Pro-Mark Dealer Advertising Signs. These are simple Plexiglas signs, about 3/16 inch thick. The backing is still on them, as shown. Possibly used by dealers selling the KWM-380. Silver dollar is for size reference only and not includ... 26 Rockwell Collins Advertising LOT Rockwell Collins Advertising LOT. As shown. Three adhesive dealer/service signs and pen. 27 Collins Instructional Videos by Hi-Res Comms Collins Instructional Videos by Hi-Res Communications, as shown. These are in VHS format and we did not test them since there isn't a VCR to be found, at least not around our shop. 12 videos, including the 30S-1, 30L-1, 75A-4, KWM-2, R-390A, KWS-1, ... 28 Collins 270G-1 Speaker Collins 270G-1 Speaker. This speaker is in working conditioin, however, it does appear that the driver was replaced at some point. Also, corrosion can be seen on the right side panel (middle and lower sections) of the speaker, as shown in the photos.... 29 Johnson Viking KW Match Box w/ Directional Coupler Johnson Viking KW Match Box and directional coupler. This unit was tested with a TS-520S and is in good working condition. Cosmetically, it is in great shape as well, as shown. The manual is readily available online. Approx. Weight: 22 lbs. Approx. ... 30 Johnson Viking KW Match Box Johnson Viking KW Match Box. This unit does not include the directional coupler, but was tested with directional coupler of the unit listed before this one, and it is in working condition. You are buying only what is pictured, with no directional co... 31 National NCL-2000 Amplifier, 120V National NCL-2000 Amplifier. This unit is in good working condition. The cosmetics on the cabinet do show some scuffs, scratches and corrosion in various places, as shown. We did have to use our own power cord (not included) for this set, as the ori... 32 Swan MARK-I Linear Amplifier, 220V Swan MARK-I Linear Amplifier. This 2 kW PEP amp is in good overall condition with a bit of staining to the top back part of the cover as well as the knob bright missing from the LEVEL control knob. This amp is wired for 220V but can be wired for 120... 33 Dentron 160-10 L Amplifier, 220V Dentron 160-10 L Amplifier, 220V. Nice looking amp, in working condition. With about 100W of drive, this unit produced about 600W CW carrier output. Uses 4, 572B power tubes. s/n 0829 Approx. Weight: 42 lbs. Approx. Dims: 15x15x7 34 Ameritron AL-80B Linear Amplifier, 120V Ameritron AL-80B Linear Amplifier. Tried and true, this amp is in good working condition. It is wired for 120V operation. With its single 3-500Z (purchased in 2014) and approximately 90W of drive, we obtained 625W CW carrier output with no issues. ... 35 Ameritron ARB-704 Interface Buffer Ameritron ARB-704 Interface Buffer. In good working condition. This unit was used with the Kenwood TS-570D found elsewhere in this auction. Includes Multi-Port cable. You will have to supply your own 12VDC power source. Manual included. Approx. Weig... 36 Ameritron ABR-704 Interface Buffer Ameritron ABR-704 Interface Buffer in good working condition, with box, interface cable, RCA connector and DC power cable. Instructions included. Approx. Weight: 2 lbs. (boxed) Approx. Dims: 6x4x3 (boxed) 37 Ameritron ATP-102 Amplifier Tuning Pulser II Ameritron ATP-102 Amplifier Tuning Pulser II. In good working condition. Used with the AL-80B found elsewhere in this auction. Approx. Weight: 1 lb. Approx. Dims: 4x5x1 38 ICOM IC-775DSP HF Transceiver ICOM IC-775DSP HF Transceiver. Very nice looking rig. This was one of the great DSP radios of it's day, and it still is a great looker, as well as performer. As you can see from the photos, the condition is good to very good. The only noticeable ble... 39 Kenwood TS-570D HF Transceiver Kenwood TS-570D HF Transceiver. Great looking and working rig! Receive sensitivity is approximately 0.3 uv on all bands. Power output was approximately 75-80W CW carrier out on all bands, and 25W out for AM operation. Power consumption at 13.8VDC ... 40 Kenwood TS-590SG HF/50 MHz Transceiver Kenwood TS-590SG HF/50 MHz Transceiver. Absolutely beautiful rig, with very little use. This radio was purchased in May 2018, as shown on the photo of the invoice. Receive sensitivity is 0.3 uv or better on all bands. Power output is 90W carrier out... 41 Drake TR7 Transceiver & PS7 Power Supply Drake TR7 Transceiver & PS7 Power Supply. Here's a great, classic rig that is in exceptional cosmetic condition, as well as working all the way! Receive sensitivity is less than 1.0 uv on all bands and transmit power is approximately 80W or better C... 42 ICOM IC-R70 Receiver ICOM IC-R70 Receiver in good cosmetic as well as working condition. Receive sensitivity is approximately 0.3 uv on all bands. Power consumption is 18W at 117VAC. You will need to supply your own IEC power cord. Approx. Weight: 15 lbs. Approx. Dims... 43 ICOM IC-R71A Receiver ICOM IC-R71A Receiver in good working as well as cosmetic condition. Receive sensitivity is approximately 0.3 uv on all HF bands. Power consumption is 29W at 117VAC. Approx. Weight: 17 lbs. Approx. Dims: 12x12x5 44 ICOM IC-720A HF All Band Transceiver ICOM IC-720A HF All Band Transceiver. Nice looking rig! Receive sensitivity is about 0.5 uv on all bands and power output is approximately 20W CW carrier out on all bands. All functions appear to work. The small plate on the front top of the cover d... 45 Yaesu FT-101B Transceiver Yaesu FT-101B Transceiver. This rig is in good condition cosmetically. It is missing the leather part of the side handle, however, there is a metal strap being used as the handle itself. Receive sensitivity is 0.5 to 1.0 uv on all bands. Transmit p... 46 Kenwood TH-D7A FM Dual Band Handheld Kenwood TH-D7A FM Dual Band Handheld. Nice looking rig, with all accessories, as shown. I believe that the battery will need to be replaced, however. After an initial charge, I was able to transmit and get into an area repeater with no issues, howev... 47 Kenwood TS-440S HF Transceiver Kenwood TS-440S HF Transceiver. Very nice looking rig with fused DC power cable and hand mic. Receive sensitivity is approximately 0.3 uv on all bands and transmit power is about 90W CW carrier out on all bands. A great, classic rig for your base or... 48 Kenwood TS-940S/AT HF Transceiver Kenwood TS-940S/AT HF Transceiver. This rig is in good to very good cosmetic condition with only a few minor scuffs and scratches. Receive sensitivity is approximately 0.3 uv on all bands and CW carrier output was about 80W on all bands. Power consu... 49 Yaesu FT-102 HF All Mode Transceiver Yaesu FT-102 HF All Mode Transceiver. Good condition cosmetically, with a few minor scuffs and scratches. Receive sensitivity is about 1.0-3.0 uv across all bands. CW carrier output is approximately 60-80W on all bands. Power consumption at 117VAC i... 50 Yaesu SP-102 Speaker Yaesu SP-102 Speaker in good working condition. All filters work. Approx. Weight: 5 lbs. Approx. Dims: 13x8x6 51 Yaesu SP-102 Speaker Yaesu SP-102 Speaker in good working condition. All filters work. Approx. Weight: 5 lbs. Approx. Dims: 13x8x6 52 ICOM SP-23 Speaker ICOM SP-23 Speaker, in very good cosmetic as well as working condition. With original box and packing materials. Cable and docs included as well. Approx. Weight: 5 lbs. Approx. Dims: 14x8x7, boxed 53 ICOM IC-706MKIIG HF/VHF/UHF All Mode Xcvr. ICOM IC-706MKIIG HF/VHF/UHF All Mode Xcvr. This radio has been well cared for and is in good working (see NOTE below) as well as cosmetic condition. Receive sensitivity is excellent, at 0.2 uv HF through VHF. Power output is approximately 50W plus (... 54 ICOM IC-229H 144MHz FM Transceiver ICOM IC-229H 144MHz FM Transceiver in good working as well as cosmetic condition. This mobile rig produces about 20W power output and receive sensitivity is 0.3 uv. Power consumption is 10A at 12VDC. Included is the original owner's manual, service ... 55 ICOM IC-229H 144MHz FM Transceiver ICOM IC-229H 144MHz FM Transceiver in good working as well as cosmetic condition. This mobile rig produces about 20W power output and receive sensitivity is 0.3 uv. Power consumption is 10A at 12VDC. Included is the original owner's manual, ICOM han... 56 Mirage B-1030-G 144-148 MHz, 300W Amp Mirage B-1030-G 144-148 MHz, 300W Amp. Very nice looking amp, in good working condition. 10W in on FM produced between 250-300W out. Approx. Weight: 13 lbs. Approx. Dims: 14x10x5 57 Kenwood TH-21A Handheld 144 MHz FM Transceiver Kenwood TH-21A Handheld 144 MHz FM Transceiver. This is a nice, clean little handheld, however, there is no power output. Receive sensitivity is good, at 0.3 uv. 2 Ni-Cad batteries, charger, antenna, operations and service manual is included. Both... 58 Kenwood TS-830S Transceiver Kenwood TS-830S Transceiver. Nice looking, and working great. Cosmetically, there is a small bit of corrosion evident to the top back cover, as shown. Otherwise, a very nice rig. Receive sensitivity is approximately 0.25 uv on all bands and power ou... 59 Kenwood VFO-240 Remote VFO Kenwood VFO-240 Remote VFO, in good working condition. This VFO was used with the TS-830S in the previous lot. DIN cable included. Approx. Weight: 6 lbs. Approx. Dims: 13x7x6 60 Kenwood SM-220 Station Monitor Kenwood SM-220 Station Monitor. This unit is in good working condition and was used with the TS-830S found in a previous lot. Very nice, clean, crisp trace, as shown. Bound copies of the instruction and service manual as well as IEC power cord are i... 61 Kenwood TS-520SE Transceiver Kenwood TS-520SE Transceiver. In good working and cosmetic condition. This rig has the optional CW filter installed. Receive sensitivity is approximately 0.3 uv across all bands and power output is approximately 80W CW carrier out. Power consumptio... 62 Yaesu FT-736R VHF/UHF All Mode w/50 & 220 MHz Yaesu FT-736R VHF/UHF All Mode w/50 & 220 MHz. This rig is fully loaded including the 50 MHz and 220 MHz options. MH-1 hand mic included, as well. Receive sensitivity is approximately 0.5 uv on all bands except 2M where it is 5.0 uv. Transmit power... 63 Yaesu FT-767GX All Mode Transceiver Yaesu FT-767GX All Mode Transceiver. This rig is in good overall cosmetic condition, with some wear to the dials and knobs. Receive sensitivity is excellent, about 0.3 uv on all bands. Transmit power was approximately 100W CW carrier output. The i... 64 TEN-TEC 580 Delta Transceiver TEN-TEC 580 Delta Transceiver. Very nice looking rig! This set has great receive sensitivity at about 0.3 uv on all bands. Transmit was about 75W plus, CW carrier output on all bands as well. 12VDC power cable included, as well as mic, manual and w... 65 ICOM IC-551 50 MHz All Mode Transceiver ICOM IC-551 50 MHz All Mode Transceiver. This rig is in overall good cosmetic condition. Receive sensitivity is approximately 0.5 uv and transmit is about 8W carrier output. Power consumption during receive is 12W and during transmit is 40W, both at... 66 ICOM IC-706 HF/VHF Transceiver ICOM IC-706 HF/VHF Transceiver. This rig is in well used but good cosmetic condition. There is some adhesive residue on the top of the case where it might have been mounted at some point. Power output at 13.8VDC was approximately 30W on HF and 6M, a... 67 ICOM IC-R5 Handheld Communications Rcvr. ICOM IC-R5 Handheld Communications Rcvr. In good working and cosmetic condition. Looks hardly used. Includes radio cover, antenna, carry strap and AC adapter. Approx. Weight: 2 lbs. Approx. Dims: 9x7x3, boxed 68 ICOM ID-51A VHF/UHF HT D-STAR Xcvr. MARS/CAP Mods ICOM ID-51A VHF/UHF Handheld Transceiver in good working condition, and appears like it's been hardly used. The MARS/CAP mods have been done by GigaParts. Includes power adapter/charger, CD ROM, Manual, antenna and radio cover. Also included is the ... 69 Alinco ALD-24T VHF/UHF Dual Band Transceiver Alinco ALD-24T VHF/UHF Dual Band Transceiver. This radio is in good used condition, with hand mic and power cord. Receive sensitivity is about 0.3 uv on both bands and power output is 5W on both bands as well. s/n 10107283 Approx. Weight: 4 lbs. A... 70 Kenwood TR-7950 2M FM Transceiver Kenwood TR-7950 2M FM Transceiver in overall good condition with some scuffs and scratches. This radio is in good working order, wtih about 0.3 uv sensitivity and 30W power output. Mic and 12VDC power cable included. 100 mA power consumption durin... 71 Kenwood TM-261A 144 MHz FM Transceiver Kenwood TM-261A 144 MHz FM Transceiver. Nice, classic 2M radio. Receive sensitivity is approximately 0.3 uv, and transmit output power is approximately 38W. All functions appear to work properly. Hand mic, and original manuals included. There is a b... 72 ICOM IC-290A 144 MHz All Mode Transceiver ICOM IC-290A 144 MHz All Mode Transceiver in good overall condition with some scuffs and scratches. Receive sensitivity is 0.3 uv and transmit power output is about 10W. Power consumption is 6 amps during transmit at 13.8VDC. Power cable connector ... 73 SignaLink USB SignaLink USB, as shown. In working condition, with all cables, as shown. This was used with an ICOM IC-7600. Approx. Weight: 1 lb. Approx. Dims: 10x7x2 74 Realistic HTX-100 10M SSB/CW Transceiver Realistic HTX-100 10M SSB/CW Transceiver in overall good cosmetic condition. Includes mic and fused power cable. Transmit was approximately 15W PEP and receive sensitivity was 0.3 uv. About 100 mA power consumption in receive and 4 amps during trans... 74 Hammarlund HX-50A Transmitter Hammarlund HX-50A Transmitter in good looking cosmetic condition. One of only 3 models of transmitters made by the company. They definitely don't come around too often. Electrically, there have been mods done as shown. Some additional work will be n... 75 Gonset G-50 6 Meter Communicator Gonset G-50 6 Meter Communicator. Very nice looking rig, with a few minor scuffs and scratches. The receive / transmit switch does not appear original. Receive sensitivity is approximately 0.5 uv and carrier output power is 15-20W. Power consumpti... 76 Hallicrafters SR-46 6M Transceiver Hallicrafters SR-46 6M Transceiver. These don't come around every day! This little 6M rig is in good condition cosmetically, with a few scuffs/scratches, and the front panel is in very good to excellent condition. Receive sensitivity is about 1.0 uv... 77 Hallicrafters HA-6 Six Meter Transverter Hallicrafters HA-6 Six Meter Transverter. As you can see, this set does have some paint loss and corrosion to the case, however, the interior of the rig looks brand new, and appears to be all original. This unit was not tested because we did not have... 78 Viking 6N2 Transmitter, VFO & extra parts unit Viking 6N2 Transmitter, VFO and extra parts unit. Very nice transmitter which works on both bands with approximately 9W output on 6M and 18W out on 2M. We used and in-house power supply for testing, you will have to build or suppy your own. Schematic... 79 Hammarlund HQ-ONE SEVENTY Receiver Hammarlund HQ-ONE SEVENTY Receiver. This rig is in good cosmetic condition, with scratches and scuffs and a couple indentations to the top of the case, as shown in the photos. Receive sensitivity is 3.0-50.0 uv depending on band. It will require som... 80 Hallicrafters HT-37 Transmitter Hallicrafters HT-37 Transmitter. Very nice looking transmittere with only a few scuffs and scratches, as shown. The front panel is in very good shape! It does appear that the chassis was painted at some point in the past. Power output is only 1-3W c... 81 E.F. Johnson Viking Valiant II Transmitter E.F. Johnson Viking Valiant II Transmitter. This rig definitely needs a new paint job, but it is in good working condition. Power output on all bands is approximately 100W-125W CW carrier out. Power consumption at 117VAC is approximately 150W and du... 82 Hallicrafters SX-101A Receiver Hallicrafters SX-101A Receiver. Another great classic receiver. Very nice cosmetically, with only a few minor scuffs and scratches. Receive sensitivity is approximately 1.0 uv across all bands. All functions operate, however, switches and contact wi... 83 Hallicrafters R-46A Speaker Hallicrafters R-46A Speaker in good overall cosmetic and working condition. The speaker does show some scuffs and scratches as well as some paint touch up to the cabinet. There are some stains to the grill cloth as shown. There are no rubber feet on ... 84 National HRO Sixty Receiver, w/ coil packs National HRO Sixty Receiver, w/ coil packs.. Very nice looking receiver with a few minor scuffs and scratches. Receive sensitivity is about 5.0 uv and power consumption is 98W at 117VAC. Includes the following coil packs with custom rack, A, B, C, ... 85 National NC-300 Receiver National NC-300 Receiver. This receiver show some wear on the knobs, but the case is in very nice shape. Power consumption is 60W at 117VAC in standby. There is no receive on this set, however, there is B+ since the VR tube is functional. Also, some... 86 National NC-300TS Speaker, Early Model National NC-300TS Speaker, Early Model in good working condition. This is the earlier model of this speaker as it has a smooth paint finish as opposed to the wrinkle paint. Approx. Weight: 6 lbs. Approx. Dims: 17x12x10 87 National NC-109 Receiver National NC-109 Receiver. Nice looking receiver with some scratches and scuffs to the cabinet. The front panel is in very good condition. Receive sensitivity is approximately 1.0 uv on all bands except band "D", where it is 30.0 uv. The S-meter will... 88 National NTS-1 Speaker National NTS-1 Speaker. This speaker matches the NC-109 and NC-188 receivers. Two tone, wrinkle paint on the lower portion. This speaker is working and does exhibit some scuffs and scratches to the cabinet. The grill cloth is very good, as shown. Th... 89 Hallicrafters S-20R Receiver Hallicrafters S-20R Receiver in fair to good cosmetic condition. There are scratches and scuffs, as well as the side trim pieces are bent, as shown. Receive sensitivity is 1.0 uv on all bands. Approx. Weight: 26 lbs. Approx. Dims: 18x11x9 90 RME-84 Receiver RME-84 Receiver. This is definitely an unusual find. Some scuffs and scratches to the case, but the dial lens is in excellent condition, except for a bit of yellowing. Receive sensitivity is approximately 2.0 uv on all bands. Approx. Weight: 20 lbs... 91 Hallicrafters 8R40 Receiver Hallicrafters 8R40 Receiver. This is a nice looking receiver, with receive sensitivity approximately 2.0-5.0 uv across all bands. Power consumption is about 45W at 117VAC. Switches and controls are dirty/noisy and will need some lubrication and/or c... 92 Hallicrafters HT-40 Transmitter Hallicrafters HT-40 Transmitter. I can definitely say I've never seen one of these little rigs before. Nice looking transmitter, with hardly any surface problems, cosmetically. With an 80M crystal installed (3.725 MHz included) we were able to tune ... 93 Hallicrafters SX-117, HT-44, PS-150-120 parts/rest Hallicrafters SX-117, HT-44 & PS-150-120 for parts or restoration. These units are in poor to fair condition cosmetically, as shown. The receiver is missing a top cover. All of these units appear to have been modified in some way, especially the pow... 94 National NCX-A Power Supply National NCX-A Power Supply. This supply is in good cosmetic condition with scuffs and scratches, as shown. All output voltages test good. The unit appears to be all original. Power consumption is 50W at 117VAC in standby. This is a switchable 110/... 95 Hallicrafters HA-5 VFO Hallicrafters HA-5 VFO in working condition with good output on all bands. There has been an on/off switch added to the front panel, as shown. Cosmetically, the case is in fair to good condition. Power consumption is 29W at 117VAC. Approx. Weight: 8... 96 SWAN 250C & 117XC parts or restoration SWAN 250C 6 Meter Xcvr & 117XC power supply, parts or restoration. These units do not power up. Fuse and power cable test OK. Being sold for parts or restoration. Cabinet is in fair cosmetic condition with some corrosion apparent. Approx. Weight: 19... 97 SWAN 250 Six Meter Transceiver, parts or restore SWAN 250 Six Meter Transceiver, parts or restore. This set does power up with approximately 90W power consumption at 117VAC. However, there is no RX/TX. We used an in house 117XC power supply for testing purposes, which is not included. Cabinet screw... 98 SWAN 250 Six Meter Transceiver, parts or restore SWAN 250 Six Meter Transceiver, parts or restore. This unit powers up with about 95W power consumption at 117VAC using an in house supply (not included). Receive sensitivity is about 100.0 uv on all bands and it does not transmit. Final tubes are pre... 99 Heathkit HG-10B External VFO Heathkit HG-10B External VFO, in good working condition. 10Vp-p on all bands. There is some paint flaking to the front, and some scratches and scuffs to the case, as shown. The last 2 photos are of the unit set to the 80M band around 3.5 MHz with t... 100 Hallicrafters SW-500 Receiver Hallicrafters SW-500 Receiver. This receiver is in good cosmetic condition, with some scratches and scuffs, as shown. Receive sensitivity is 20.0 - 200.0 uv, and there is excessive filter hum. So, some work is in order to get this set back in good w... 101 Hallicrafters SX-99 Mark 1D Receiver Hallicrafters SX-99 Mark 1D Receiver. This receiver is in good condition, cosmetically, with some of the front panel lettering worn off, as shown. It does appear that the cabinet has been repainted at some point in the past. Power consumption is 75W... 102 Hallicrafters SX-9 Super Skyrider Hallicrafters SX-9 Super Skyrider. As you can see from the photos, There were some modifications made to the front of the unit, i.e., light with cover installed, and a non-original band spread knob, as well as a headphone jack in the upper right corn... 103 Regency MR-10 Monitoradio Regency MR-10 Monitoradio. This is a commerical/business band FM radio receiver, 152-174 MHz. It is non-functional, as far as receive goes. It does power up and draws about 21W at 117VAC. Approx. Weight: 7 lbs. Approx. Dims: 12x7x6 104 Apollo Phase Two 500X-2 RF 11M Amplifier Apollo Phase Two 500X-2 RF 11M Amplifier. AM or SSB only. This amp powers up and draws approximately 100W in standby and 200W in the operate position. However, no power output is produced. Also, the meter is non-operational. From what I could find a... 105 Heathkit AA-50 Stereo Amplifier Heathkit AA-50 Stereo Amplifier. One of their first, if not the first amplifier produced by Heathkit. This amp appears to be all original. The four 7591 audio output tubes all test good at 54/36, 60/36, 45/36 and 60/36, where 36 is the minimum good v... 106 Peavey Series 260 PA Mixer Amp Peavey Series 260 PA Mixer Amp. In good cosmetic as well working condition. The controls are a bit dirty/noisy and could use some cleaning and/or lubrication. s/n 4A27836 Approx. Weight: 32 lbs. Approx. Dims: 24x12x8 107 Peavey 410 Column Speaker Peavey 410 Column Speaker in working condition. The Peavey emblem on the front of the speaker is missing. Furniture dolly not included. s/n 4E19871 Approx. Weight: Over 70 lbs. Approx. Dims: 48x18x12 108 Kustom 15P MON Corner Speaker Kustom 15P MON Corner Speaker. In working condition. Furniture dolly not included. s/n S153218 Approx. Weight: 52 lbs. Approx. Dims: 24x23x15 109 Fisher MC-2000 Receiver & AD-823 CD Player Fisher MC-2000 Receiver & AD-823 CD Player. These items are in good cosmetic condition. The receiver works, but the controls are noisy and will need lubrication/cleaning. The CD player powers on and the drawer ejects. No further testing was done. Ap... 110 Bose & Astatic Speakers Bose & Astatic Speakers. You are buying a pair of Bose Comnpanion 2 mutimedia speakers and an Astatic VS2 external mobile speaker. Both are in like new, cosmetic and working condition. Approx. Weight, total: 7 lbs. Approx. Dims: 11x9x7 & 5x5x3, boxe... 111 LOT of 5 Transistor Radios LOT of 5 Transistor Radios, as shown. The two Channel Master's are in working condition. The other 3 have been untested. Approx. Total Weight: 5 lbs. 112 Philco 48-464 Bakelite Table Radio Philco 48-464 Bakelite Table Radio. Absolutely beautiful cabinet and glass dial on this set, as shown. Power consumption was approximately 25W when powered on. Only static was heard on both the BC and SW bands. Some alignment or other work may be ne... 113 Hallicrafters TW-2000 World-Wide Portable Radio Hallicrafters TW-2000 World-Wide Portable Radio. This portable is in exceptional condition, with only a few minor scuffs to the cabinet, mainly on the back, as shown. Telescoping antenna is complete and functions properly. Receive sensitivity is ap... 114 Kolster K-24 Console Radio Receiver, 1928-29 Kolster K-24 Console Radio Receiver. Absolutely beautiful walnut console, in very good condition cosmetically. This beast draws about 90W at 117VAC. It does appear complete and original, except for a few noticeable replacement caps and a new power ... 115 Crosley Console Radio, 1920's/30's Crosley Console Radio in good overall cosmetic condition, as well as working condition. As will all radios of this this era, you're going to need a generous length of wire for your antenna, and a good ground. Was unable to find an exact model number,... 116 Zenith G844 AM/FM Console Radio Zenith G844 AM/FM Console Radio. Very nice looking radio, cosmetically. The radio dial will need to be restrung, and their is a distinct hum present on any band. Volume does vary with the volume control. NOTE: Please check shipping costs if you req... 117 Atwater Kent Model 20 Receiver, short version Atwater Kent Model 20 Receiver, short version. Nice looking AK with only a few minor scuffs/scratches. All globe tubes. and appears all original. Approx. Weight: 12 lbs. Approx. Dims: 20x7x6 118 Atwater Kent Model 20 Receiver, long version Atwater Kent Model 20 Receiver, long version. Nice looking set, with only a few minor scuffs/scratches. Appears to be all original except for terminal strip wires. All globe tubes. Approx. Weight: 18 lbs. Approx. Dims: 26x8x8 119 RCA Radiola 17 RCA Radiola 17. Appears to be all original. The cabinet is in good condition, however, the switches, dials and escutcheon, do exhibit some corrosion, as shown. Approx. Weight: 42 lbs. Approx. Dims: 27x9x8 120 RCA Radiola 17 RCA Radiola 17. This set is in very good condition cosmetically, and is working as well. New line cord and cleaned up well. Approx. Weight: 42 lbs. Approx. Dims: 27x9x8 121 American Bosch 28 Radio & Peerless Dynamic Spkr. American Bosch 28 Radio & Peerless Dynamic Spkr. The radio and speaker are in working condition, however, the volume is quite low, so I'm assuming some adjustments may be necessary. As you can see, the radio cabinet is in very good condition with on... 122 Kolster Model 8A Table Radio Kolster Model 8A Table Radio. This is one nice looking "table" radio. Note, you'll need a fairly large table, but it will be a nice looker! The set appears to be all original, all globe tubes except one shoulder tube is present. The cabinet and escu... 123 Brunswick 5KR Radio Receiver Brunswick 5KR Radio Receiver. As you can see from the photos, this set appears to be all original and will definitely need some cabinet work. Approx. Weight: 41 lbs. Approx. Dims: 27x9x9 124 Early TRF, 2-tube Radio Set, unknown mfg Early TRF, 2-tube Radio Set, unknown mfg. As shown, in good condition, no tubes. The only identifying mark is the cabinet maker, found on the bottom of cabinet. See last photo. International Equipment, Kansas City, MO (KCMO). Approx. Weight: 9 lbs. ... 125 ABRE-III Universal Battery Eliminator ABRE-III Universal Battery Eliminator. In excellent working condition, as well as cosmetic condition. This is one of the best units sold in the industry. s/n 2100 Approx. Weight: 6 Approx. Dims: 9x8x3 126 Atwater Kent Model G Horn Speaker Atwater Kent Model G Horn Speaker. Very nice looking horn speaker. Two tone finsh, brown for the horn and base, and green for the neck. There is a crack in the finish on one side of the base as shown, otherwise a beautiful piece. This horn is in goo... 127 Atwater Kent Model E Speaker Atwater Kent Model E Speaker. This is only the enclosure and the cone. The speaker element is not present. Wrinkle finish. Approx. Weight: 10 lbs. Approx. Dims: 18" H x 15' dia. 128 Atwater Kent Model E Speaker Atwater Kent Model E Speaker. In good working and cosmetic condition. Very nice smooth finish. An excellent addition to your AK collection! Approx. Weight: 11 lbs. Approx. Dims: 18" H x 15' dia 129 Atwater Kent Model F-4-A Speaker Atwater Kent Model F-4-A Speaker. Here's a very nice looking AK speaker that is in great working condition as well. Smooth finish and beautiful grill cloth. Approx. Weight: 23 lbs. Approx. Dims: 16x7, 13" dia. 130 Crosley Dynacone Type F Speaker Crosley Dynacone Type F Speaker. This speaker is in fair to good cosmetic condition, as shown. The speaker element is open, and non-operational. Approx. Weight: 5 lbs. Approx. Dims: 13" H x 12" dia. 131 RCA Model 100 Speaker RCA Model 100 Speaker. This speaker is in working condition. Cosmetically, the cabinet is in very nice condition. The front and back grills do not have interior grill cloth. Also, they are a bit loose when attached to the main cabinet. Approx. Weigh... 132 RCA Model 100-A Speaker RCA Model 100-A Speaker. This working speaker is in very good condition cosmetically. Only one minor area to notice on the front grill cloth, as shown in the photos. One rubber foot is missing from the bottom of the unit. Approx. Weight: 13 lbs. App... 133 RCA Model 100-B Speaker RCA Model 100-B Speaker. This working speaker is in very good cosmetic condition, with the exception of the areas on the front and back grill cloth, as shown in the photos. The front grill cloth has a small tear in the upper left and the 3 o'clock po... 134 Farrand Table Speaker Farrand Table Speaker. This speaker is in working condition. The front grill cloth does have some damage to the top area, as shown. The cabinet is in good condition with some scuffs/scratches. Approx. Weight: 8 lbs. Approx. Dims: 11x10x7 135 National Panasonic and Realistic Portable Radios National Panasonic and Realistic Portable Radios. The Panasonic is an RF-5000A and the Realistic is a 12-751A. Both units are Solid State and they are both in working condition. That said, the cabinets on these sets could use a cleaning, and the knob... 136 Drake WH7 Wattmeter Drake WH7 Wattmeter in good to very good cosmetic condition. This is one very accurate meter! Up to 2kW. It does look like someone added a BNC cable to the transmitter input, as shown. Approx. Weight: 4 lbs. Approx. Dims: 8x7x5 137 MFJ-924 UHF 440 MHz Antenna Tuner MFJ-924 UHF 440 MHz Antenna Tuner in working condition. Approx. Weight: 1 lb. Approx. Dims: 8x4x2 138 Heathkit HM-102 Power SWR Meter Heathkit HM-102 Power SWR Meter in good working and looking condition, as shown. Approx. Weight: 2 lbs. Approx. Dims: 4x4x4 139 Heathkit & DAIWA SWR Power Meters Heathkit & DAIWA SWR Power Meters. You are bidding on a total of 3 meters. Two are Heathkit HM-2102's and one is a Diawa CN-720. One Heathkit has a loose meter and is not accurate. The other Heathkit works OK and has N connectors installed. The Diawa... 140 MFJ-259B HF/VHF SWR Antenna Analyzer MFJ-259B HF/VHF SWR Antenna Analyzer. This unit is in good working condition. You will have to supply your own DC power source. Approx. Weight: 2 lbs. Approx. Dims: 11x6x4, boxed 141 MFJ-249 HF/VHF SWR Antenna Analyzer MFJ-249 HF/VHF SWR Antenna Analyzer in good working condition. Tested with both HF/VHF antennas and dummy load. One rubber foot is missing and the others have been glued back on. Approx. Weight: 2 lbs. Approx. Dims: 8x4x3 142 MFJ-931 Artificial Ground MFJ-931 Artificial Ground. In working condition. Approx. Weight: 3 lbs. Approx. Dims: 8x7x3 143 GENRAD W5MT3 Variac GENRAD W5MT3 Variac, works well. Dial is accurate. Approx. Weight: 9 lbs. Approx. Dims: 7x7x5 144 GenRad Type 100-Q Variac, Max 18A GenRad Type 100-Q Variac, Max 18A. This unit is in great working condition. As you can see from the photos, the dial knob rim has been broken off, but it still turns just fine. Otherwise, a very nice looking unit. Approx. Weight: 30 lbs. Approx. Dim... 145 Heathkit HN-31 Cantenna RF Dummy Load Heathkit HN-31 Cantenna RF Dummy Load. Good working condition with original manual. PLEASE NOTE: If this unit is to be shipped, the oil will be removed from the can. You will need to supply your own. Approx. Weight w/o oil: 1.5 lbs. Approx. Dims:... 146 Samlex SEC-1223 Regulated DC Power Supply Samlex SEC-1223 Regulated DC Power Supply. This supply is in great working condition. Tested with a 13A load with approximately 230W power consumption at 117VAC. About 4.7W in standby. Please note that the set screws on the connectors are present. T... 147 MFJ-4230MV 30A Switching Power Supply MFJ-4230MV 30A Switching Power Supply 148 MFJ-868B Giant True Peak-Reading SWR/Wattmeter MFJ-868B Giant True Peak-Reading SWR/Wattmeter. In excellent working condition. There are some scratches and scuffs to the cabinet, but does not impede functionality. 12VDC power cord required for dial light, but is not included. Approx. Weight: 3 l... 149 MFJ-962D Versa Tuner III MFJ-962D Versa Tuner III. In great working condition! A few scratches and scuffs to the cabinet, as shown. 12VDC power source needed for dial light. Manual included. Approx. Weight: 8 lbs. Approx. Dims: 15x11x4 150 MFJ-209 HF/VHF SWR Antenna Analyzer MFJ-209 HF/VHF SWR Antenna Analyzer. One of the earlier analyzer's, and still in great working condition. With manual and DC power adapter. Approx. Weight: 3 lbs. Approx. Weight: 11x6x4 151 MFJ-213 Antenna Analyzer MFJ-213 Antenna Analyzer. This set powers up just fine and all functions are easily accessible using the controls. However, basic SWR measurement appears to be not functioning properly. All antennas tested and a non-reactive 50 ohm load had readings ... 152 Calrad VC-6 Variac Calrad VC-6 Variac. In good working condition, as shown. Rated at 2.5A. Approx. Weight: 11 lbs. Approx. Dims: 7x8x6 153 Tektronix 7834 Storage Oscilloscope w/plug-ins Tektronix 7834 Storage Oscilloscope w/plug-ins. Scope and storage is in working condition and all plug-ins appear to work, however, extensive testing was not done on this unit. Tek P6106 probe included. You will need to supply your own IEC standard ... 154 Tektronix 7834 Storage Oscilloscope w/plug-ins Tektronix 7834 Storage Oscilloscope w/plug-ins. Scope and storage is in working condition and all plug-ins appear to work, however, extensive testing was not done on this unit. Tek P6106 probe included. You will need to supply your own IEC standard ... 155 Tektronix 7633 Oscilloscope Tektronix 7633 Oscilloscope. The mainframe appears to be stuck in "erase". All power supplies test OK. You will need to supply your own IEC standard power cord. Approx. Weight: 40 lbs. Approx. Dims: 23x12x9 156 Ameritron RCS-8V Remote Coax Switch, NOS Ameritron RCS-8V Remote Coax Switch, NOS. This remote coax switch was sealed in the box and new, old stock. I removed the contents for photos only. As shown. s/n 17326 Approx. Weight: 5 lbs. Approx. Dims: 9x7x7 157 Ameritron RCS-8V Remote Coax Switch, NOS Ameritron RCS-8V Remote Coax Switch, NOS. This remote coax switch was sealed in the box and is new, old stock. Please see previous LOT for photos of the contents, as I did not unpack this one. s/n 17327 Approx. Weight: 5 lbs. Approx. Dims: 9x7x7 158 B&K 747B Dyna-Jet Solid State Tube Tester B&K 747B Dyna-Jet Solid State Tube Tester in great cosmetic condition! This unit is in working condition, as well, tested about half a dozen known good tubes with no issues. Includes instruction manual and tube data charts, as shown. Approx. Weight:... 159 Conar 223 Tube Tester Conar 223 Tube Tester. Nice looking tester, well taken care of. This emissions tester appears to work fine with known good tubes. Line adjust is working correctly. With manaul and tube test data sheets. Approx. Weight: 12 lbs. Approx. Dims: 15x11x6 160 Fluke 80K-6 HV Probe, 6 kV Peak Max Fluke 80K-6 HV Probe, 6 kV Peak Max. This probe is in good working condition and appears to have been hardly used. Approx. Weight: 6 oz. Approx. Dims: 10" length 161 Superior Instruments TC-55 Tube Tester Superior Instruments TC-55 Tube Tester. Unit does not power on, but is in nice shape. Great summer project, or display piece. With tube data sheet and carry case. Approx. Weight: 4 lbs. Approx. Dims: 9x8x2 162 EICO 379 & 330 Square/Sine and RF Generators EICO 379 & 330 Square/Sine and RF Generators. Both of these units are in great shape, cosmetically. The 379 is working great on all bands except the 100K Square Wave, and will need some adjustment. The 330 is in good working condition on all bands e... 163 ECI Combination Power Supply ECI Combination Power Supply. In good working condition. Ratings are shown in the photos. Approx. Weight: 22 lbs. Approx. Dims: 13x10x9 164 Alinco DM-330MV Switching Power Supply Alinco DM-330MV Switching Power Supply. In good working condition. 32A max. Approx. Weight: 5 lbs. Approx. Dims: 8x7x3 165 Permax QRVPR Soldering Station Permax QRVPR Soldering Station in good working condition, as shown. Approx. Weight: 3 lbs. Approx. Dims: 10x7x5 166 Kenwood HC-10 World Clock & Other Clock Kenwood HC-10 World Clock & Other Clock. The Kenwood clock is in good working condition and includes the manual. The Bulova world clock includes a thermometer. The thermometer is in working condition. The clock is battery operated and was not tested.... 167 Military 2J450TH Transmitting Tube, 1942 Military 2J450TH Transmitting Tube. I'm assuming this is a 450TH, not sure what the 2J designation is used for. This is one LARGE transmitting tube. It would definitely warm up the room! It has never been removed from the box, and is still suspended ... 168 Begali Simplex Mono Basic Custom CW Key, by I2RTF Begali Simplex Mono Basic Custom CW Key, by I2RTF. Beautiful Italian made key, hardly used, in excellent working as well as cosmetic condition. As shown. Refer to the web link above for info about this key. s/n 048 Approx. Weight, boxed: 4 lbs. App... 169 Begali Expedition Custom CW Key, by I2RTF Begali Expedition Custom CW Key, by I2RTF. Beautiful Italian made key, hardly used, in excellent working as well as cosmetic condition. As shown. Refer to the web link above for info about this key. A set of black paddles are included, as shown. s/... 170 Begali CW Machine Trainer Begali CW Machine Trainer, in good working condition, with accessories, as shown. Please see link above for user manual. Approx. Weight, total: 2 lbs. 171 RA Model P-2 Brass Iambic Key RA Model P-2 Brass Iambic Key, by K8RA. Solid Brass, about 2.75 lbs for the key alone. In very good, working and cosmetic condition. Wood grain paddles, and an extra set of clear paddles. Other accessories as shown. s/n 0437 Approx. Total Weight: 3... 172 Kent KT-1 Brass Morse Straight Key, German Made Kent KT-1 Brass Morse Straight Key, German Made. Very nice brass straight key with heavy black steel base. In working and great cosmetic condition. Please see link above for specs. Approx. Weight: 3 lbs. Approx. Dims, boxed: 10x5x5 173 Vibroplex (?) Lightning Bug Key, Black Base Vibroplex (?) Lightning Bug Key. Since there is no nameplate, I can't be sure that this is in fact, a Vibroplex key. It does have the "M" damper, as shown. There are two holes on the base where the nameplate should be attached. It is in good working ... 174 Vibroplex (?) Lightning Bug Key, Black Base Vibroplex (?) Lightning Bug Key. Since there is no nameplate, I can't be sure that this is in fact, a Vibroplex key. It does have the "M" damper, as shown. There are two holes on the base where the nameplate should be attached. It is in good working ... 175 E.F. Johnson Speed-X Semi-Automatic Key E.F. Johnson Speed-X Semi-Automatic Key. In good working condition, as well as cosmetic condition. Nameplate attached, #114. Approx. Weight: 4 lbs. 176 HAL Devices Version of W8FYO Iambic Paddle, 1960's HAL Devices Version of W8FYO Iambic Paddle, 1960's As shown, in very good working as well as cosmetic condition. Approx. Weight: 3 lbs. 177 Autronic Single Paddle Morse Key Autronic Single Paddle Morse Key. In good working as well as good cosmetic condition. There are a couple of small paint flecks on the right side of the paddle, as shown. Approx. Weight: 4 lbs. 178 Bencher Iambic Keyer, Chrome Bencher Iambic Keyer, Chrome. In excellent working as well as cosmetic condition. With 1/8' phono plug and cable. Approx. Weight: 3 lbs. 179 Bencher Iambic Keyer, Chrome Bencher Iambic Keyer, Chrome. In excellent working as well as cosmetic condition. With 1/8' phono plug and cable. Approx. Weight: 3 lbs. 180 MFJ-564 Iambic Key Paddle, Chrome MFJ-564 Iambic Key Paddle, Chrome. In excellent working as well as cosmetic condition. With 1/4" phono plug and cable, as shown. Approx. Weight: 3 lbs. 181 Nye Viking SSK-001 Paddle Nye Viking SSK-001 Paddle. In very good working as well as cosmetic condition. With 1/4 inch phono plug and cable. There is a bit of residue or wear on the top cover, as shown. Approx. Weight: 3 lbs. 182 Unmarked Keyer/Paddle Unmarked Keyer/Paddle. This could very well be a home brew unit. Corrosion is evident on the metal, as shown. Would probably clean up well. Approx. Weight: 3 lbs. 183 Brown Bros. Model ST Morse Key Brown Bros. Model ST Morse Key. There is some paint flaking, as shown. Otherwise, nice working key with heavy cast base. Approx. Weight: 3 lbs. 184 Westclox British Military Telegraph Key Westclox British Military Telegraph Key. As shown, appears to be a bakelite base. Approx. Weight: 1 lb. 185 Speed-X Morse Key and Base Speed-X Morse Key and Base. The base of the key is cast metal, the key itself is sitting on a larger metal base. Approx. Weight: 2 lbs. 186 Brass E.F. Johnson Morse Key Brass E.F. Johnson Morse Key. as shown. Approx. Weight: 1 lb. 187 (3) J-37 Telegraph Keys (3) J-37 Telegraph Keys. As shown, one with bakelite base. Approx. Weight: 2 lbs. 188 (2) Signal Electric Morse Keys (2) Signal Electric Morse Keys. As shown, with metal base. Approx. Weight: 2 lbs. 189 (5) Various Morse Keys (5) Various Morse Keys. The leftmost key is an AT&T key, with a brass base. The key next to is appears to have bakelite base and the only marking is a serial or model number, as shown in the pics. The middle key is a Speed-X, and the last two keys a... 190 MFJ-411 Pocket Morse Tutor MFJ-411 Pocket Morse Tutor in good working condition, as shown. You will need to provide your own DC supply. Approx. Weight: 1 lb. Approx. Dims: 6x3x1 191 Bud Codemaster Tube CW Code Oscillator Bud Codemaster Tube CW Code Oscillator. In working condition. Approx. Weight: 3 lbs. Approx. Dims: 7x6x4 192 MFJ-422B Electronic Keyer Paddle MFJ-422B Electronic Keyer Paddle. In good working condition. You will need to supply your own DC power source. Approx. Weight: 2 lbs. Approx. Dims: 4x4x2 193 Heil PR 781 Studio Microphone & Accessories Heil PR 781 Studio Microphone & Accessories. Very nice setup here, folks. These items appear to have hardly been used, if that. Mic is in working condition. Includes PL-2T mic boom, HS-2 hand switch and FL-2 flange mount for the boom. Approx. Total... 194 Heil HM-10 Microphone w/HC-5 Element & Pedal Heil HM-10 Microphone w/HC-5 Element & Pedal. This mic with foot pedal is in great working condition. It has an 8-pin DIN connector that was used with the Kenwood 570 and 590, found elsewhere in this auction. Included is the mic leaflet/manual. Appr... 195 Shure Desk Microphone, unmarked (444) Shure Desk Microphone, unmarked. This is probably a 444 model but it is unmarked. No connector, but in working condition. Output impedance is 1 K ohm. There are some scuffs and scratches and some dings to the mouthpiece cover. The back plate to the h... 196 Turner 454X Desk Mic w/ Heil HC-5 Element Turner 454X Desk Mic w/ Heil HC-5 Element. In good working and cosmetic condition, as shown. There is a small fleck of paint missing on the front part of the neck, about half way down. 2-pin mic connector included. Approx. Weight: 2 lbs. 197 Western Electric T-32 Mic w/635A Carbon Element Western Electric T-32 Mic w/635A Carbon Element. This mic is in working condition and was used with a BC-61- transmitter. The original schematic/wiring diagram has been mounted on white cardstock, as it was fairly brittle and needed some support so i... 198 (2) Turner 454C Desk Microphones (2) Turner 454C Desk Microphones. Both of these mics are in working condition and come with 1/4" phono jacks. They do show some wear, as seen in the photos. The lock lever on the mic on the left has broken off, but it still works. Approx. Total Wei... 199 Turner 251 & SSB+2 Desk Microphones Turner 251 & SSB+2 Desk Microphones. Both of these mics are in working condition and the pre-amp on the SSB+2 tests good. The SSB+2 includes a 2-pin connector, the 251 has no connector. Cosmetically, both mics are in fair/good condition with scratch... 200 Kenwood MC-60 Desktop Microphone Kenwood MC-60 Desktop Microphone in good working condition, as shown. 8-pin DIN connector. Approx. Weight: 2 lbs. 201 Kenwood MC-85 Desk Microphone Kenwood MC-85 Desk Microphone. This mic is in very good condition both cosmetically, and electrically. Working well with 8-pin DIN connector. Approx. Weight: 4 lbs. Approx. Dims: 7x6x5 202 ICOM SM-8 Desk Microphone ICOM SM-8 Desk Microphone in good working condition. Would be a great companion to the ICOM 775DSP rig also found in this auction. 8-pin DIN connector. Approx. Weight: 2 lbs. 203 (2) Black Shure 444D Desk Microphones (2) Black Shure 444 Desk Microphones. Both of these mics are in good working condition. They do have some paint wear around the head. One has been touched up with a marker. The left mic is missing one rubber foot. Extension works fine on both. One 4-... 204 Shure 444 Desk Microphone Shure 444 Desk Microphone. This mic is in good working condition, however, as you can see, it does have some cosmetic problems in the form of chipped off pieces around the bottom edges of both the front and back of the mic. There is also an added pus... 205 Ten-Tec 705 Desk Microphone Ten-Tec 705 Desk Microphone 206 Ten-Tec (Electro Voice) 215 Desk Microphone Ten-Tec (Electro Voice) 215 Desk Microphone. This working mic does have some condition issues. As you can see, the mic itself has some paint flaking off, plus there is a dent toward the middle bottom of the mic, as shown. The base is in good conditio... 207 Electro Voice 729S Ceramic Mic Electro Voice 729S Ceramic Mic. In working condition, with 1/4 inch phono plug, as shown. Approx. Weight: 2 lbs. 208 Turner Plus Three Desktop Microphone Turner Plus Three Desktop Microphone in good working condition. Cosmetically, the mic does show some wear from use over the years. 4-pin connector. Approx. Weight: 2 lbs. 209 Turner CS-1 Desktop Microphone Turner CS-1 Desktop Microphone, Custom Special. This mic is in good working condition, no connector included. It does show some wear from use as you can see in the photos. Approx. Weight: 2 lbs. 210 Shure Bros. 55S Mic w/ Cast Metal Stand Shure Bros. 55S Mic w/ Cast Metal Stand. This mic is in good working as well as very good looking condition. Classic design with that Art Deco appearance. The mic stand is new and does not telescope. No cable included. There is a small hole in the mi... 211 Shure Bros. 737A Crystal Desk Microphone Shure Bros 737A Crystal Desk Microphone. Another good looking and working mic. This crystal mic would be a great addition to your collection. Atlas Sound aluminum base. No cable included. There is a small hole in the screen on the extreme lower right... 212 Electro Voice Model 610 Desk Microphone Electro Voice Model 610 Desk Microphone. I believe this Hi impedance mic to be vintage 1950's. It is in good looking as well as working condition. Classic deco design on a cast metal, non-telescoping base. Mic cable not included. Approx. Weight: 4 l... 213 Electro Voice Model 664 Desk Microphone Electro Voice Model 664 Desk Microphone. Beautiful, working, EV mic with Atlas Sound cast metal stand and mic connector. No cable is included. There is some minor wear, as shown in the photos. Also, some roughness to the edge of the mic screen can be... 214 Executone EXC EV-664 Microphone Executone EXC EV-664 Microphone. This working mic is the commercial/pro audio version of the EV-664. Atlas Sound base. No cable included. There is some wear to the paint on the sides of the mic. Approx. Weight: 5 lbs. 215 (3) Electro Voice Desk Microphones (3) Electro Voice Desk Microphones. All of these mics have the EV 423A base. The mic on the left and the middle mic are EV-638's. The mic on the right (end) is what appears to be an EV-635. All of these mic elements are in working condition. The two ... 216 Astatic D-104 Golden Eagle Microphone Astatic D-104 Golden Eagle Microphone. In good working condition with amplified base. Includes mic cable but no connector. Cosmetically, it's in good to very good shape with only some very minor pitting evident on the base of the mic. Approx. Weigh... 217 Astatic D-104 Black Golden Eagle Microphone Astatic D-104 Black Golden Eagle Microphone. This is one sharp looking mic, with a matte black finish and gold trimmings. It's in good working condition, with an amplified base, as shown. Approx. Weight: 3 lbs. 218 Astatic D-104 with T-UG8 Stand Astatic D-104 with T-UG8 Amplified Stand in good working condition. The base does show some wear. 3/16" PJ-068 mic connector (can be used with Collins) included. Approx. Weight: 3 lbs. 219 Astatic D-104 with T-UG8 Stand Astatic D-104 with T-UG8 Amplified Stand in good working condition. The base does show some wear. No connector included. Approx. Weight: 3 lbs. 220 Astatic Model 10-C Desk Microphone Astatic Model 10-C Desk Microphone with UG8 stand. This mic is in very good cosmetic as well as working condition. Cable and 4-pin connector included. Approx. Weight: 3 lbs. 221 Astatic T-3 & Dukane 7C40 Desk Mics Astatic T-3 & Dukane 7C40 Desk Mics. The T-3 is a non-functional mic with an F-11 adapter and 1/4 inch phono plug, as shown. The chrome on the mic is pitted and the EV 423A base does show some wear. The Dukane 7C40 mic is the shell only (no mic elem... 222 Turner 95D Desk Microphone Turner 95D Desk Microphone in good working condition. This mic includes a newer cast metal base and stand. No cable is included. Approx. Weight: 3 lbs. 223 Turner S22D Desk Microphone Turner S22D Desk Microphone in good working condition with cast metal base. This mic does shown some minor pitting and roughness on the chrome, otherwise in very good shape. Includes cable and 2-pin connector (Johnson/Collins). Approx. Weight: 4 lbs... 224 Turner 33X Crystal Desk Microphone Turner 33X Crystal Desk Microphone. This mic is in very good condition cosmetically, and excellent working condition. Includes cable and 1/4 inch phono connector. Approx. Weight: 4 lbs. 225 Turner 22D Desk Microphone Turner 22D Desk Microphone. In working condition. You will note, however, the connector at the base of the mic head will need to be replaced, as it has become mechanically disconnected from the head. The mic element is good. Heavy metal base. Approx... 226 Collins SM-3 CLONE Desk Microphone Collins SM-3 CLONE Desk Microphone. This is NOT a Collins mic, but a clone of the SM-3. The only identifying marks are on the bottom of the base, as shown, from U.G.M. products, by Bill Duval, K5UGM. I'm not sure if this was a product from Bill, or i... 227 SBE 100X Amplified Desk Mic SBE 100X Amplified Desk Mic. In very good cosmetic as well as working condition. The right side of the bottom of the base does show some paint chipping. 3/16" mic connector included. Approx. Weight, boxed: 4 lbs. Approx. Dims, boxed: 10x9x5 228 EMCO Radio Products Desk Microphone EMCO Radio Products Desk Microphone. This is a working mic, however, no other identifying marks other than those under the base are to be found. Approx. Weight: 3 lbs. 229 Electro Voice 915 Crystal Mic & Novelty Mic Electro Voice 915 Crystal Mic & Novelty Mic. The EV 915 is non-working, but in fair to good condition cosmetically. The smaller plastic novelty mic is a speaker with a phono jack. It is also non-functional. Approx. Weight: 2 lbs. 230 MFJ-1263 Microphone / Radio Switch MFJ-1263 Microphone / Radio Switch. This unit is in working condition. Pleas note the two holes in top cover. These were used to mount the unit under a shelf, they are not original to the switch. MFJ-5398 8-pin DIN to 8-pin modular adapter cable inc... 231 Heil HS-2 Ergonomic Hand Switch Heil HS-2 Ergonomic Hand Switch, in good working condition. This item appears to be unused based on how it was packed in the box. Approx. Weight: 1 lb. 232 Yaesu FRA-7700 Active Antenna Yaesu FRA-7700 Active Antenna, in working condition. As shown. Approx. Weight: 2 lbs. Approx. Dims: 10x8x3 233 Pixel PRO-1B Active Magnetic Loop Antenna Pixel PRO-1B Active Magnetic Loop Antenna. This is a used antenna, but all parts and original box and packaging are included. The unit is in good working condition. Approx. Weight: 12 lbs. Approx. Dims: 40x40x4 234 Palomar Engineers CMNF-2 Common Mode Noise Filter Palomar Engineers CMNF-2 Common Mode Noise Filter, in good working condition. As shown. Approx. Weight: 1 lb. Approx. Dims: 5x5x3 235 MFJ-1700B Transmitter Antenna Switch MFJ-1700B Transmitter Antenna Switch in good working condition. Some scratches and scuffs to the case, as shown. Approx. Weight: 2 lbs. Approx. Dims: 10x5x2 236 Heathkit GD-1B Grid Dip Meter Heathkit GD-1B Grid Dip Meter in good working as well as cosmetic condition. All coils included, 2-5, 5-14, 14-37, 37-100 and 100-250 MHz. With original manual. Approx. Weight: 3 lbs. 237 Pair of Baluns, 4:1 & 1:1 Pair of Baluns, 4:1 & 1:1. HI-Q 4:1 and Hy-Gain 1:1, as shown. New old stock, never used. Hardware and instruction booklets included. Approx. Weight: 2 lbs. 238 DX Eng. BAL050-H05A MAXI-CORE Balun DX Eng. BAL050-H05A MAXI-CORE Balun. As shown. Doesn't appear to have been used, in good working condition. Approx. Weight: 3 lbs. Approx. Dims: 11x5x4, boxed 239 Vectronics DL-650M 1.5 kW Dummy Load Vectronics DL-650M 1.5 kW Dummy Load. In good working condition, as shown. 1-650 MHz. Approx. Weight: 2 lbs. Approx. Dims: 11x5x4 240 LDG M-7600 External Meter for ICOM IC-7600 LDG M-7600 External Meter for ICOM IC-7600, in good working as well as cosmetic condition, as shown with accessories and manual. Approx. Weight: 3 lbs. Approx. Dims: 9x6x6, boxed 241 DAIWA CN-801 Cross Needle SWR Power Meter DAIWA CN-801 Cross Needle SWR Power Meter, in like new condition. Works well! With DC power cord and manual. Approx. Weight: 3 lbs. Approx. Dims: 7x7x5 242 DAIWA CN-901 Cross Needle SWR Power Meter DAIWA CN-901 Cross Needle SWR Power Meter, in like new condition. Works well! With DC power cord and manual. Approx. Weight: 3 lbs. Approx. Dims: 7x7x5 243 MFJ-986 3KW Roller Inductor Tuner MFJ-986 3KW Roller Inductor Tuner. This tuner is in good working condition, except the belt for the inductance counter is either missing or broken. Otherwise, a good, working tuner! Approx. Weight: 11 lbs. Approx. Dims: 17x11x5 244 Comet & Diamond Mobile Antennas Comet & Diamond Mobile Antennas. One of the Diamond D-130J's is new, never opened. The other one may have been used, but all parts are present. The Comet antenna does not appear to have been used. Approx. Weight: 7 lbs. total Approx. Longest Length:... 245 Alliance HD-73 Heavy Duty Rotor, Rebuilt Alliance HD-73 Heavy Duty Rotor, Rebuilt. This unit is in good working order, with rotor control. It was rebuilt back in 2017 and looks new. See photos of invoice for work done. Includes instruction manual and hardware, as shown. Approx. Weight: 15 ... 246 MFJ-1020C Active Antenna MFJ-1020C Active Antenna, as shown. In working condition. You will need to supply your own DC power source. Approx. Weight: 2 lbs. Approx. Dims: 11x5x4 247 Sony AN-1 Wide Range Antenna Sony AN-1 Wide Range Antenna, as shown. This item has been used and does exhibit some corrosion on the threads of the antenna base. Unit powers up but was otherwise untested. Approx. Weight: 5 lbs. Approx. Dims: 20x7x3 boxed 248 Optoelectronics Model 40 Scout VHF/UHF Optoelectronics Model 40 Scout. As shown, with N100 notch filter and stub antenna. Powers up, but no further testing was performed. VHF/UHF frequency scanner/counter. Approx. Weight: 2 lbs. Approx. Dims: 6x5x2 249 Powerstat 3PN116B, 10A, 0-140V Variac Powerstat 3PN116B, 10A, 0-140V Variac. In good working condition. Approx. Weight: 11 lbs. Approx. Dims: 7x7x7 250 Newmar 115-12-8 Power Supply, 13.8VDC Newmar 115-12-8 Power Supply, 13.8VDC. Powers up and produces 13.8VDC. We did not test this supply under load. Approx. Weight: 10 lbs. Approx. Dims: 9x6x5 251 (3) Miscellaneous Spools Wire/Cable (3) Miscellaneous Spools Wire/Cable, total weight is 78 lbs. As shown, the box appears to be fairly full and is marked 1500 ft. It is the same as the wire on the spool to the left, bottom. Two conductor, solid wire. It almost looks like standard zip... 252 Spool .035 Automatic Welding Wire Spool .035 Automatic Welding Wire, as shown. The label is marked 30#, however, this spool weighs 60 lbs. It is copper coated, not solid copper. 253 Belden RG-8/U 9913 Coax GY, 500 ft. Spool 50 Ohm Belden RG-8/U 9913 Coax, 500 ft. Spool. This spool still has the original plastic shrink wrap in place. Approx. Weight: 60 lbs. total. 15" dia., 10" H. 254 Belden RG-8/U 9913 Coax 2JA, 1000 ft. Spool 50 Ohm Belden RG-8/U 9913 Coax, 1000 ft. Spool. This spool is a partial, but I'm guessing that there is 750 ft. or more remaining. The spool weighs more than 75 lbs. (that's the max on my scale, and it won't weigh this spool). A full spool of this coax wei... 255 Misc. RG-58 Cable & Spool of same Misc. RG-58 Cable & Spool of same. The dimensions of the spool are about 6.5" dia. and 6" H. BNC connectors on both ends. The other two lengths are approximately 25 ft. each, one has BNC's on both ends and one has a BNC and an RCA connector. Approx... 256 1000 ft. 24AWG/4 Pair Direct Bury Solid CMX F/UTP 1000 ft. 24AWG/4 Pair Direct Bury Solid CMX F/UTP. I'm guessing this CAT5E cable was going to be used as rotor control cable. Even though the box has seen better days, the cable is in great shape; and as you can see, the markings on the cable start w... 257 1000 ft. 2 Pair, CAT3 Communications Cable 1000 ft. 2 Pair, CAT3 Communications Cable, as shown. Appears to be a full spool. Approx. Weight: 12 lbs. Approx. Dims: 11x11x7 258 DXE 400MAXDUO Coax Jumpers, 50ft., 12ft. (x2) DXE 400MAXDUO Coax Jumpers, 50ft., 12ft. (x2) 259 (7) Various ARRL Antenna Handbooks (7) Various ARRL Antenna Handbooks/Compendiums, as shown. 1974, 1984, 1988, 1991, 1994 ARRL Handbooks 1985 Antenna Compendium Vol. 1 1995 Antenna Compendium Vol. 4 Approx. Total Weight: 16 lbs. 260 1995 ARRL Handbook, unopened 1995 ARRL Handbook, unopened. In original shrink wrap, as shown. Approx. Weight: 5 lbs. 261 (3) Various ARRL Handbooks (3) Various ARRL Handbooks. As shown. 1978, 1995 and 1991 (hardback). Approx. Weight: 12 lbs. 262 2014 Centennial Ed. ARRL Handbook 2014 Centennial Ed. ARRL Handbook 263 1932 ARRL Handbook 1932 ARRL Handbook. This handbook has definitely been used! Binding is missing, but all pages appear to be intact. Writing throughout. 264 (6) Various ARRL Handbooks (6) Various ARRL Handbooks, as shown. They are all complete. 1968, 69, 71, 72, 74, 78. Approx. Weight: 12 lbs. 265 2008, 2010 ARRL Handbooks 2008, 2010 ARRL Handbooks. As shown, the 2010 is hardback, all CD's present. Approx. Weight: 12 lbs. 266 (3) Various 50s/60s ARRL Handbooks (3) Various 50s/60s ARRL Handbooks. 1950, 57 and 67. As shown. 1967 is hardback. Approx. Weight: 8 lbs. 267 (3) Various ARRL Books & Manuals (3) Various ARRL Books & Manuals including the 21st Ed. Antenna Book w/CD ROM. 8th Ed. Ops Manual and a 1st Ed. Getting Started with Ham Radio book. Approx. Weigth: 7 lbs. 268 (3) Various Early ARRL Handbooks (3) Various Early ARRL Handbooks. The blue handbook is dated 1934 and is missing the binding and the pages have some wear and it appears it was stored in a damp location at some point. Looks complete, but can not verify. The middle, red handbook is ... 269 (2) ARRL Antenna Books (2) ARRL Antenna Books, 1956 and 1984. As shown. Approx. Weight: 3 lbs. 270 (5) Early Radio Catalogs and Books (5) Early Radio Catalogs and Books, as shown. 1937 Jones Radio Handbook and Supplement. (2) 1938 Radio Handbooks, and 1940 Amateurs Catalog, Wholesale Radio Labs. Condition is fair to good on these. They do appear complete. Approx. Weight: 5 lbs. 271 (5) Boatanchor Manuals (5) Boatanchor Manuals, as shown. Viking Ranger Kit, Hammarlund SP-400-SX, Halli SX-28A andd SX-28, and Johnson Ranger II Transmitter. Approx. Weight: 2 lbs. 272 (4) Early Tube Manuals and Catalogs (4) Early Tube Manuals and Catalogs. Eimac, 1945 & 1948, Amperex 1945 and Taylor Tubes, 1937-38. Approx. Weight: 2 lbs. 273 Radio Set SCR-206-A Instruction Book Radio Set SCR-206-A Instruction Book, 1936. In great condition! Approx. Weight: < 1 lb. 274 Elecraft K2 Transceiver Owners Manual Elecraft K2 Transceiver Owners Manual, as shown. Complete. 275 Icom IC-746PRO Instruction Manual Icom IC-746PRO Instruction Manual. Complete, as shown. 276 LOT of Collins Manuals and Miscellaneous LOT of Collins Manuals and Miscellaneous. Various manuals, brochures, service bulletins, as shown. 136B-2 Noise Blanker, 312B-4/5 x (2), 516F-2, Collins Signal 1947, Collins Equipment 1964, 75S-1, 32S-1. Approx. Weight: 2 lbs. 277 Metal Ray-O-Vac Battery Trash Can Metal Ray-O-Vac Battery Trash Can. As shown. Approx. Weight: 2 lbs. Approx. Dims: 15" H x 9" dia. 278 Sprague Electrolytics Counter Display Sprague Electrolytics Counter Display. Nice looking metal cap display. Some boxes are empty, some have used caps and some NOS. Approx. Weight: 5 lbs. Approx. Dims: 10x9x6 279 General Cement Radio Dial Belts Counter Display General Cement Radio Dial Belts Counter Display. As shown with various dial string and belts in storage. Corrosion to the cabinet and the drawer does stick when pulled out. Approx. Weight: 5 lbs. Approx. Dims: 14x6x4 280 Grecom PSR-800 Digital Scanning Receiver Grecom PSR-800 Digital Scanning Receiver. This unit has never been out of the box, so that's the way I'm leaving it. As shown. Approx. Weight: 2 lbs. Approx. Dims: 8x6x2, boxed 281 Grecom PSR-200U Desktop Scanner w/Headphones Grecom PSR-200U Desktop Scanner w/Headphones. In good working condition with an extra set of phones! Approx. Total Weight: 4 lbs. Aprpox. Dims: 13x9x3, 8x7x3 282 Uniden Bearcat BCD996T Trunktracker IV Uniden Bearcat BCD996T Trunktracker IV. In good working condition with all standard accessories. Approx. Weight: 6 lbs. Approx. Dims: 13x9x4 283 Uniden BC785D Digital Scanner Tracker III Uniden BC785D Digital Scanner Tracker III, in good working condition. This unit appears to have been hardly used. Includes all standard accessories. Approx. Weight: 6 lbs. Approx. Dims: 13x8x4 284 AOR AR8000 Wide Range Hand Held Receiver AOR AR8000 Wide Range Hand Held Receiver. In good working condition. Did not check to see how long the battery would hold a charge. Approx. Weight: 2 lbs. Approx. Dims: 9x7x3 285 Eddie Bauer WR2 World Receiver Eddie Bauer WR2 World Receiver in good working condition, with items shown. Approx. Weight: 2 lbs. Approx. Dims: 8x4x2 286 Uniden Radar Detector LRD 6299SW Uniden Radar Detector LRD 6299SW. This unit does power up, but no further testing was done. Approx. Weight: 1 lbs. Approx. Dims: 8x6x2 |
Photo Gallery
|
|||||
---|---|---|---|---|---|
|